Creating an IP Resource

The first resource to be created on LifeKeeper should be an IP resource. As discussed earlier, a client can find the Active Node using a Virtual IP Address. Below is the list of IP addresses that are referenced in this section.

IP Addresses for Nodes

IP Address for the IP Resource Based on the Scenario

In a cloud environment, please review Switching between Nodes in a Cloud Environment to identify the most applicable scenario before selecting an IP address.

Platform	Scenario	How to Select an IP Address	Sample IP Addresses Used in this Guide	Default Name of the IP Address
AWS	Route Table Scenario	IP address that is outside of the VPC CIDR	10.10.10.10	ip-10.10.10.10
	Route 53 Scenario	IP address that is assigned to the “active” node	10.20.1.10	realip
	Elastic IP Scenario	Not required to create an IP Resource. Skip this page.
Google Cloud
Azure		An available IP address on the subnet	10.20.0.10	ip-10.20.0.10
On-premise environment

Configure an IP Resource

This example uses 10.10.10.10 as the IP address to be used for “Route Table Scenario“ in AWS.

1. Click the button in the LifeKeeper User Interface (or select Edit > Server > Create Resource Hierarchy).

2. The Create Resource Wizard (on node-a) will be displayed and the type of resource to be protected can be selected. Select “IP” and then click “Next>”.

3. Select the default values. The only field you need to enter is the virtual IP address 10.10.10.10 in the IP Resource field.

*Note: For items with a checkmark ( ), review and use the default values.

Field	Value
Switchback Type	Intelligent
Server	node-a
IP Resource	10.10.10.10
Net Mask	255.255.255.0 Note: This value may vary based on the network.
Network Interface	eth0
IP Resource Tag	ip-10.10.10.10

Values such as Net Mask are displayed based on how the local system is configured. Therefore the default values seen may vary.

4. Once you confirm the resource is successfully created, click “Next>”.

5. The next step is the “Pre-Extend Wizard (on node-a)”.

Select all of the defaults as shown below.

Field	Value
Target Server	node-b
Switchback Type	Intelligent
Template Priority	1
Target Priority	10

The Pre-Extend check should be successfully completed. Click “Next”.

6. The next step is “Extend comm/IP Resource Hierarchy (on node-a)”. Click “Next” and fill in the fields.

Field	Value
Net Mask	255.255.255.0 Note: This value may vary based on the network.
Network Interface	eth0
IP Resource Tag	ip-10.10.10.10

7. Now the resource is extended. Select “Finish”.

8. The verification is now complete and the wizard can be closed.

9. The IP Resource (ip-10.10.10.10) will be displayed on the LifeKeeper User Interface.

As we have seen, resources may be easily protected by answering the questions in the resource creation wizard. Most of the values are prepopulated based on an understanding of the environment and therefore minimal user interaction is required.