You can set up the Recovery Kit for EC2™ through the use of the LKCLI (Command Line Interface).
Creating/Extending/Configuring the EC2™ resource from the Command Line
create EC2
EXAMPLE: #lkcli resource create ec2 --tag <ip tag> --type <EC2 Type> --switchback <switchback type>
| Option | Default | Description |
|---|---|---|
| --type <str> | Specify the type of EC2™ resource to be create. Specify “RouteTable” to select a route table scenario, “Elastic IP” to select an Elastic IP scenario. |
--type RouteTable
EXAMPLE: #lkcli resource create ec2 --tag <tag> --type RouteTable --ip_resource <IP tag> --switchback <switchback type>
| Option | Default | Description |
|---|---|---|
| --ip_resource <str> | Specify the tag name of the IP resource created in advance. |
--type ElasticIP
EXAMPLE: #lkcli resource create ec2 --tag <tag> --type ElasticIP --eip <IP address> --dev <network interface name> --switchback <switchback type>
| Option | Default | Description |
|---|---|---|
| --eip <str> | The IP address of the Elastic IP you want to protect. | |
| --dev <str> | Network interface name to which EIP is attached. |
extend EC2
EXAMPLE: #lkcli resource extend ec2 --tag <tag> --dest <backup node> --switchback <switchback type> --template_prioity <priority> --target_priority <prority>
config EC2
Nothing to configure
Post your comment on this topic.