In this section we will create highly-available NFS shared file systems which will be mounted on each node hosting an SAP instance. We will also create SIOS DataKeeper mirrors to replicate data for the ASCS10 and ERS20 instances between node-a and node-b. Typical file systems to be shared or replicated between systems in a highly-available SAP AS ABAP environment include:

  • /sapmnt/<SID>
  • /usr/sap/trans
  • /usr/sap/<SID>/ASCS<InstNum>
  • /usr/sap/<SID>/ERS<InstNum>

See Setting up File Systems for a High-Availability System for more details.

  1. Create and attach four additional disks to node-a and node-b to support the highly-available SAP installation. The device names used in this example may vary depending on your environment (e.g., /dev/xvdb instead of /dev/sdb), so adjust the commands given in the section accordingly to use the appropriate device names. Note that these disk sizes are used for evaluation purposes only. Consult the relevant documentation from SAP, your cloud provider, and any third-party storage provider when provisioning resources in a production environment.
Device Name
Minimum Size
Mount Point
/dev/sdb 8GB /export/sapmnt/SPS
/dev/sdc 8GB /export/usr/sap/trans
/dev/sdd 8GB /usr/sap/SPS/ASCS10
/dev/sde 4GB /usr/sap/SPS/ERS20
  1. Execute the following commands on both node-a and node-b to create a /dev/sdb1 partition with an xfs file system.
[root@node-a ~]# parted /dev/sdb --script mklabel gpt mkpart xfspart xfs 0% 100%

[root@node-a ~]# mkfs.xfs /dev/sdb1
meta-data=/dev/sdb1    isize=512   agcount=4, agsize=1310592 blks
         =             sectsz=4096 attr=2, projid32bit=1
         =             crc=1       finobt=1, sparse=1, rmapbt=0
         =             reflink=1
data     =             bsize=4096  blocks=5242368, imaxpct=25
         =             sunit=0     swidth=0 blks
naming   =version 2    bsize=4096  ascii-ci=0, ftype=1
log      =internal log bsize=4096  blocks=2560, version=2
         =             sectsz=4096 sunit=1 blks, lazy-count=1
realtime =none         extsz=4096  blocks=0, rtextents=0

[root@node-a ~]# partprobe /dev/sdb1

Repeat these commands for /dev/sdc, /dev/sdd, and /dev/sde on both node-a and node-b.

  1. Execute the following command on both node-a and node-b to create the mount points for the shared and replicated SAP file systems:
[root@node-a ~]# mkdir -p /export/{usr/sap/trans,sapmnt/SPS} /sapmnt/SPS /usr/sap/{trans,SPS/{ASCS10,ERS20,SYS}}

Create DataKeeper Data Replication Resource Hierarchies

  1. Following the steps described in How to Create Data Replication of a File System, use the following parameters to create and extend a DataKeeper data replication resource (datarep-/export/sapmnt/SPS) to mirror the contents of the /export/sapmnt/SPS directory between node-a and node-b. Notice that the DataKeeper resource is being created on node-a and extended to node-b. Also note that the resulting resource should not be extended to node-c, the witness node. The icon indicates that the default option is chosen.
Field
Value
Create Resource Wizard
Switchback Type intelligent
Server node-a
Hierarchy Type Replicate New Filesystem
Source Disk /dev/sdb1 (8.0 GB)
New Mount Point /export/sapmnt/SPS
New Filesystem Type xfs
Data Replication Resource Tag datarep-/export/sapmnt/SPS
File System Resource Tag /export/sapmnt/SPS
Bitmap File /opt/LifeKeeper/bitmap__export_sapmnt_SPS
Enable Asynchronous Replication? no
Pre-Extend Wizard
Target Server node-b
Switchback Type intelligent
Template Priority 1
Target Priority 10
Extend scsi/netraid Resource Hierarchy Wizard
Mount Point /export/sapmnt/SPS
Root Tag /export/sapmnt/SPS
Target Disk /dev/sdb1 (8.0 GB)
Data Replication Resource Tag datarep-/export/sapmnt/SPS
Bitmap File /opt/LifeKeeper/bitmap__export_sapmnt_SPS
Replication Path 10.20.1.10/10.20.2.10
  1. Following the steps described in How to Create Data Replication of a File System, use the following parameters to create and extend a DataKeeper data replication resource (datarep-/export/usr/sap/trans) to mirror the contents of the /export/usr/sap/trans directory between node-a and node-b. Notice that the DataKeeper resource is being created on node-a and extended to node-b. Also note that the resulting resource should not be extended to node-c, the witness node. The icon indicates that the default option is chosen.
Field
Value
Create Resource Wizard
Switchback Type intelligent
Server node-a
Hierarchy Type Replicate New Filesystem
Source Disk /dev/sdc1 (8.0 GB)
New Mount Point /export/usr/sap/trans
New Filesystem Type xfs
Data Replication Resource Tag datarep-/export/usr/sap/trans
File System Resource Tag /export/usr/sap/trans
Bitmap File /opt/LifeKeeper/bitmap__export_usr_sap_trans
Enable Asynchronous Replication? no
Pre-Extend Wizard
Target Server node-b
Switchback Type intelligent
Template Priority 1
Target Priority 10
Extend scsi/netraid Resource Hierarchy Wizard
Mount Point /export/usr/sap/trans
Root Tag /export/usr/sap/trans
Target Disk /dev/sdc1 (8.0 GB)
Data Replication Resource Tag datarep-/export/usr/sap/trans
Bitmap File /opt/LifeKeeper/bitmap__export_usr_sap_trans
Replication Path 10.20.1.10/10.20.2.10
  1. Following the steps described in How to Create Data Replication of a File System, use the following parameters to create and extend a DataKeeper data replication resource (datarep-/usr/sap/SPS/ASCS10) to mirror the contents of the /usr/sap/SPS/ASCS10 directory between node-a and node-b. Notice that the DataKeeper resource is being created on node-a and extended to node-b. Also note that the resulting resource should not be extended to node-c, the witness node. The icon indicates that the default option is chosen.
Field
Value
Create Resource Wizard
Switchback Type intelligent
Server node-a
Hierarchy Type Replicate New Filesystem
Source Disk /dev/sdd1 (8.0 GB)
New Mount Point /usr/sap/SPS/ASCS10
New Filesystem Type xfs
Data Replication Resource Tag datarep-/usr/sap/SPS/ASCS10
File System Resource Tag /usr/sap/SPS/ASCS10
Bitmap File /opt/LifeKeeper/bitmap__usr_sap_SPS_ASCS10
Enable Asynchronous Replication? no
Pre-Extend Wizard
Target Server node-b
Switchback Type intelligent
Template Priority 1
Target Priority 10
Extend scsi/netraid Resource Hierarchy Wizard
Mount Point /usr/sap/SPS/ASCS10
Root Tag /usr/sap/SPS/ASCS10
Target Disk /dev/sdd1 (8.0 GB)
Data Replication Resource Tag datarep-/usr/sap/SPS/ASCS10
Bitmap File /opt/LifeKeeper/bitmap__usr_sap_SPS_ASCS10
Replication Path 10.20.1.10/10.20.2.10
  1. Following the steps described in How to Create Data Replication of a File System, use the following parameters to create and extend a DataKeeper data replication resource (datarep-/usr/sap/SPS/ERS20) to mirror the contents of the /usr/sap/SPS/ERS20 directory between node-a and node-b. Notice that the DataKeeper resource is being created on node-b and extended to node-a. Also note that the resulting resource should not be extended to node-c, the witness node. The icon indicates that the default option is chosen.
Field
Value
Create Resource Wizard
Switchback Type intelligent
Server node-b
Hierarchy Type Replicate New Filesystem
Source Disk /dev/sde1 (4.0 GB)
New Mount Point /usr/sap/SPS/ERS20
New Filesystem Type xfs
Data Replication Resource Tag datarep-/usr/sap/SPS/ERS20
File System Resource Tag /usr/sap/SPS/ERS20
Bitmap File /opt/LifeKeeper/bitmap__usr_sap_SPS_ERS20
Enable Asynchronous Replication? no
Pre-Extend Wizard
Target Server node-a
Switchback Type intelligent
Template Priority 1
Target Priority 10
Extend scsi/netraid Resource Hierarchy Wizard
Mount Point /usr/sap/SPS/ERS20
Root Tag /usr/sap/SPS/ERS20
Target Disk /dev/sde1 (4.0 GB)
Data Replication Resource Tag datarep-/usr/sap/SPS/ERS20
Bitmap File /opt/LifeKeeper/bitmap__usr_sap_SPS_ERS20
Replication Path 10.20.2.10/10.20.1.10

Once all of the DataKeeper data replication resource hierarchies have been created, the LifeKeeper GUI should look similar to the following image:

Create NFS Resource Hierarchies

  1. If deploying on RedHat Enterprise Linux 8.x, enable NFSv3 via UDP by adding the line ‘udp=y’ to the [nfsd] section of /etc/nfs.conf and restarting the nfs-server service. This step must be performed on both node-a and node-b.
# vi /etc/nfs.conf
# cat /etc/nfs.conf
<snip>
[nfsd]
<snip>
udp=y
<snip>
# systemctl restart nfs-server
  1. Add the following entries to /etc/exports on node-a:
/export/sapmnt/SPS *(rw,sync,no_root_squash)
/export/usr/sap/trans *(rw,sync,no_root_squash)
  1. Execute the following command on node-a to export the shared file systems:
[root@node-a ~]# exportfs -rav
exporting *:/export/usr/sap/trans
exporting *:/export/sapmnt/SPS
  1. Execute the following command to verify that the shared file systems are visible from both node-a and node-b, as well as from the servers that will host the PAS and AAS instances:
# showmount -e sps-ascs
Export list for sps-ascs:
/export/usr/sap/trans *
/export/sapmnt/SPS    *
  1. Following the steps described in Protecting an NFS Resource, use the following parameters to create and extend an NFS resource (nfs-/export/sapmnt/SPS) to protect the shared /export/sapmnt/SPS file system. Notice that the NFS resource is being created on node-a and extended to node-b. Also note that the resulting resource should not be extended to node-c, the witness node. The icon indicates that the default option is chosen.
Field
Value
Create Resource Wizard
Switchback Type intelligent
Server node-a
Export Point /export/sapmnt/SPS
IP Tag ip-sps-ascs
NFS Tag nfs-/export/sapmnt/SPS
Pre-Extend Wizard
Target Server node-b
Switchback Type intelligent
Template Priority 1
Target Priority 10
Extend gen/nfs Resource Hierarchy Wizard
NFS Tag nfs-/export/sapmnt/SPS
  1. Following the steps described in Protecting an NFS Resource, use the following parameters to create and extend an NFS resource (nfs-/export/usr/sap/trans) to protect the shared /export/usr/sap/trans file system. Notice that the NFS resource is being created on node-a and extended to node-b. Also note that the resulting resource should not be extended to node-c, the witness node. The icon indicates that the default option is chosen.
Field
Value
Create Resource Wizard
Switchback Type intelligent
Server node-a
Export Point /export/usr/sap/trans
IP Tag ip-sps-ascs
NFS Tag nfs-/usr/sap/trans
Pre-Extend Wizard
Target Server node-b
Switchback Type intelligent
Template Priority 1
Target Priority 10
Extend gen/nfs Resource Hierarchy Wizard
NFS Tag nfs-/export/usr/sap/trans

Once the NFS resource hierarchies have been created successfully, the LifeKeeper GUI should resemble the following image. Note that the names of the resources used to protect the ASCS and ERS instance virtual host names may differ depending on which subsection of Create ASCS and ERS Virtual IPs was followed.

Add Mount Entries to /etc/fstab

  1. Execute the following commands on node-a, node-b, node-d, and node-e (the ASCS, ERS, PAS, and AAS instance hosts) to mount sps-ascs:/export/sapmnt/SPS at /sapmnt/SPS during boot:
# echo "sps-ascs:/export/sapmnt/SPS    /sapmnt/SPS    nfs    nfsvers=3,proto=udp,rw,sync,bg    0 0" >> /etc/fstab
# mount /sapmnt/SPS
  1. Execute the following commands on node-d and node-e (the PAS and AAS instance hosts) to mount sps-ascs:/export/usr/sap/trans at /usr/sap/trans during boot:
# echo "sps-ascs:/export/usr/sap/trans    /usr/sap/trans    nfs    nfsvers=3,proto=udp,rw,sync,bg    0 0" >> /etc/fstab
# mount /usr/sap/trans

Modify /etc/default/LifeKeeper

Add the line ‘SAP_NFS_CHECK_DIRS=/sapmnt/SPS’ to /etc/default/LifeKeeper on node-a and node-b to allow the SAP Recovery Kit to monitor the availability of the sps-ascs:/export/sapmnt/SPS NFS share before performing administrative tasks that require access to files found on the shared file system.

The shared file systems are now prepared for installation of the SAP instances.

フィードバック

お役に立ちましたか?

はい いいえ
お役に立ちましたか
理由をお聞かせください
フィードバックありがとうございました

このトピックへフィードバック

送信