SIOS TECHNOLOGY CORP.

Combined Message Catalog

Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen.


Code Severity Message Cause/Action
000200 ERROR pam_start() failed
000201 ERROR pam_authenticate failed (user %s, retval %d)
000202 ERROR pam_end() failed?!?!
000203 ERROR Did not find expected group ‘lkguest’
000204 ERROR Did not find expected group ‘lkoper’
000205 ERROR Did not find expected group ‘lkadmin’
000208 ERROR pam_setcred establish credentials failed (user %s, retval %d)

Cause: Unable to establish valid login credentials for user {user}. The pam_setcred call returned: {retval}.

Action: Check /var/log/security and /var/log/messages for more information.
000209 ERROR pam_setcred delete credentials failed (user %s, retval %d)

Cause: Unable to clear login credentials for user {user}. The pam_setcred call returned: {retval}.

Action: Check /var/log/security and /var/log/messages for more information.
000902 ERROR Error removing system name from loopback address line in /etc/hosts file. You must do this manually before starting the GUI server.

Cause: System name did not get removed from /etc/hosts file.

Action: Remove system name manually then restart the GUI server, then enter the following:
run <action name>
000918 ERROR LifeKeeper GUI Server error during Startup

Cause: The GUI server terminated due to an abnormal condition.

Action: Check the logs for related errors and try to resolve the reported problem.
000931 ERROR S_LK server process died or was killed
000932 ERROR *** Too many failed attempts to start the LifeKeeper GUI server java process.
000933 ERROR *** Stopping further startup attempts.
000934 ERROR *** After correcting the problem, start the GUI server with ‘lkGUIserver start
001041 FATAL Usage error
001042 FATAL %s: both tag and id name not specified
001043 FATAL %s: resource "%s" not found on local server
001048 ERROR Resource "%s" is not ISP on server "%s" Manually bring the resource in service and retry the operation
001051 FATAL Either TEMPLATESYS or TEMPLATETAG argument missing
001052 FATAL Template resource "%s" on server "%s" does not exist

Cause: LifeKeeper was unable to find the resource {tag} on {server}.
001053 ERROR Cannot access canextend script "%s" on server "%s"

Cause: LifeKeeper was unable to run pre-extend checks because it was unable to find the script CANEXTEND on {server}.

Action: Check your LifeKeeper configuration.
001054 ERROR Cannot extend resource "%s" to server "%s"

Cause: LifeKeeper was unable to extend the resource {resource} on {server}.
001055 ERROR Cannot access extend script "%s" on server "%s"

Cause: LifeKeeper was unable to extend the resource hierarchy because it was unable to the find the script EXTEND on {server}.

Action: Check your LifeKeeper configuration.
001056 ERROR Unable to get a unique tag name on server "%s" for template resource "%s"
001057 ERROR Cannot extend resource "%s" to server "%s"

Cause: LifeKeeper was unable to extend the resource {resource} on {server}.
001058 ERROR END failed resource extension of "%s" on server "%s" due to a "%s" signal – backing out changes made to server
001059 ERROR Resource with tag "%s" already exists

Cause: The name provided for a resource is already in use.

Action: Either choose a different name for the resource, or use the existing resource.
001060 ERROR Resource with either matching tag "%s" or id "%s" already exists on server "%s" for App "%s" and Type "%s"

Cause: The name or id provided for a resource is already in use.

Action: Either choose a different name or id for the resource or use the existing resource.
001061 ERROR Error creating resource "%s" on server "%s"

Cause: An unexpected failure occurred while creating a resource.

Action: Check the logs for related errors and try to resolve the reported problem.

001062 FATAL create: Usage error
001063 FATAL %s: tag name not specified
001064 FATAL %s: switchback name not specified
001073 ERROR Error bringing resource "%s" in service on server "%s"
001081 WARN IP address \"$ip\" is neither v4 nor v6

Cause: The IP address provided is neither an IPv4 nor an IPv6 address.

Action: Please check the name or address provided and try again. If a name was provided, verify that name resolution returns a valid IP address.
002018 ERROR Error finding one of the hierarchy root(s) "%s" on server "%s". Verify that all of the resources passed in exist on the server and that server and comm paths are alive.
002019 ERROR Roots passed in which include "%s" on server "%s" don\‘t match the actual roots found for the hierarchy. In order to change the priority of a hierarchy, you must pass to the script a list of all root resources for all associated hierarchies. Verify that all root resources are in the list passed and that all of these are root resources.
002020 ERROR Error finding all roots to do root validation for resource(s) "%s" on server "%s". Verify that server and comm paths are alive, then retry the operation.
002021 ERROR Error getting equivalencies for some of the resources in hierarchy with root(s) "%s" on server "%s". Verify that all remote servers have a live comm path to the server where the hierarchy is being changed and that all equivalencies exist.
002022 ERROR There was an error changing priorities for hierarchy with root(s) "%s" and previous priorities could not be successfully restored. Verify that there is a live comm path to all servers where the hierarchies exist. When all comm paths are restored, try repairing the priorities one at a time using the command line utility hry_setpri. If the damage is too severe, the hierarchies may have to be deleted and re-created.
002023 ERROR There was an error changing priorities for hierarchy with root(s) "%s" and all previous priorities were successfully restored. Retry the operation.
002024 ERROR Resource "%s" has an equivalency on a server that does not have a live comm path with server "%s". All servers where the hierarchy exists must have a live comm path with the server where the priority is being changed. Retry the operation after all comm paths are re-established between the servers.
002025 ERROR The desired priority change on server "%s" causes a conflict with an existing priority on another server for hierarchy with root(s) "%s". Retry the operation with a different priority which doesn\‘t currently exist in the hierarchy.
002026 ERROR The requested priority change would cause the hierarchy to have reverse priorities. LifeKeeper allows resources within hierarchies to have different priority values so long as the relative order is the same for all resources within the hierarchy on all systems where the hierarchy exists. The proposed priority change would cause one of the resources within the hierarchy to have priority values in non-relative order with the other resources in the hierarchy. Try to determine a priority value which will not cause a reverse priority order and retry the operation.
002027 ERROR The selected hierarchy with root(s) "%s" does not exist on server "%s". Select a server on which the hierarchy exists and retry the operation.
002028 ERROR The selected hierarchy with root(s) "%s" only exists on server "%s". You cannot change the priority of a hierarchy that only exists on one server.
002029 ERROR The selected priority value for server "%s" does not fall within the acceptable range of 1-999. Please select a priority value within the acceptable range and retry the operation.
002030 ERROR Error getting cluster wide administrative locks for operation. Verify that all systems and comm paths are alive in cluster, then retry the operation.
004001 ERROR passed in NULL pointer to ins_othersys
004013 ERROR test_list ttag arg is NULL
004014 ERROR test_and_remove_from_list ttag arg is NULL
004016 ERROR add_to_list ttag arg is NULL
004019 ERROR remove_from_list arg is NULL
004020 ERROR add_to_list arg is NULL
004024 ERROR

Cause: LCD failed to fetch resource information for resource id {id} during resource recovery.

Action: Verify the input resource id and retry the recovery operation.
004028 ERROR %s occurred to resource \"%s\"

Cause: Local recovery failed for resource {resource}.

Action: Check the logs for related errors and try to resolve the reported problem.
004055 ERROR attempt to remote-remove resource \"%s\" that can’t be found

Cause: Remotely removing a resource from service failed while attempting to find the resource by tag name {tag}.

Action: Check input tag name and retry the recovery operation.
004056 ERROR attempt to remote-remove resource \"%s\" that is not a shared resource

Cause: Remotely removing a resource from service failed given that the tag name {tag} is not a shared resource.

Action: Check input tag name and retry the recovery operation.
004060 ERROR attempt to transfer-restore resource \"%s\" that can’t be found

Cause: Remote transfer of an in service resource failed given tag name {tag}.

Action: Check input tag name and retry the recovery operation.
004061 ERROR attempt to transfer-restore resource \"%s\" that is not a shared resource with machine \"%s\"

Cause: LifeKeeper failed to find a shared resource by {tag} name during remote transfer of a resource in service from a remote {machine}.

Action: Check input tag name and retry the recovery operation.
004062 ERROR attempt to transfer-restore resource \"%s\" that is not a secondary shared resource with primary on machine \"%s\"
004089 ERROR ERROR: Parallel recovery initialization failed.\n

Cause: Parallel recovery failed to initialize the list of resources in the hierarchy.

Action: Check the logs for related errors and try to resolve the reported problem.
004091 ERROR ERROR: fork failed. continuing to next resource\n

Cause: Parallel recovery failed to fork a new process attempting to restore a single resource.
004093 ERROR ERROR: reserve failed. continuing to next resource\n

Cause: Parallel recovery failed to reserve a single resource from the collective hierarchy.

Action: Check the logs for related errors and try to resolve the reported problem.
004095 ERROR ERROR: wait() error\n
004096 ERROR ERROR: clone %d is hung, attempting to kill it\n

Cause: A single sub process of a resource recovery is hung during parallel recovery of a whole resource hierarchy.

Action: A kill of the hanging sub process will be executed automatically.
004097 ERROR ERROR: Could not kill clone %d\n

Cause: Failed to kill the hung sub process.
004116 ERROR %s

Cause: Writing an on-disk version of an in-memory data object failed attempting to create the intermediate folder. This is a system error.

Action: Check log for the error information in detail and determine why the intermediate folder is not created.
004117 ERROR open(%s)

Cause: Writing an on-disk version of an in-memory data object failed while attempting to open a temporary file. This is a system error.

Action: Check log for the error information in detail and determine why the file is not successfully opened.
004118 ERROR write(%s)

Cause: Writing an on-disk version of an in-memory data object failed while attempting to write to a temporary file. This is a system error.

Action: Check log for the error information in detail and determine why the file writing is failed.
004119 ERROR fsync(%s)

Cause: Writing an on-disk version of an in-memory data object failed while attempting to fsync a temporary file. This is a system error.

Action: Check log for the error information in detail and determine why the "fsync" is failed.
004120 ERROR close(%s)

Cause: Writing an on-disk version of an in-memory data object failed while attempting to close a temporary file. This is a system error.

Action: Check log for the error information in detail and determine why the file closing is failed.
004121 ERROR rename(%s, %s)

Cause: Writing an on-disk version of an in-memory data object failed while attempting to rename a temporary file {file} to original file {file}. This is a system error.

Action: Check log for the error information in detail and determine why the file renaming is failed.
004122 ERROR open(%s)

Cause: Writing an on-disk version of an in-memory data object failed while attempting to open an intermediate directory {directory}. This is a system error."

Action: Check log for the error information in detail and determine why the directory open is failed.
004123 ERROR fsync(%s)

Cause: Writing an on-disk version of an in-memory data object failed while attempting to fsync an intermediate directory {directory}. This is a system error.

Action: Check log for the error information in detail and determine why the directory "fsync" is failed.
004124 ERROR close(%s)

Cause: Writing an on-disk version of an in-memory data object failed while attempting to close an intermediate directory {directory}. This is a system error.

Action: Check log for the error information in detail and determine why the directory close is failed.
004125 ERROR wrote only %d bytes of requested %d\n

Cause: Writing an on-disk version of an in-memory data object failed as the final size {size} bytes of written data is less than the requested number {number} of bytes.

Action: Check log for the related error information in detail and determine why the data writing is failed.
004126 ERROR open(%s)

Cause: Attempting to open a data file failed during the reading of an on-disk version of the data object into the buffer. This is a system error.

Action: Check log for the error information in detail and determine why the file open is failed.
004127 ERROR open(%s)

Cause: Attempting to open a temporary data file failed during the reading of an on-disk version of the data object into the buffer. This is a system error.

Action: Check log for the error information in detail and determine why the file open is failed.
004128 ERROR read(%s)

Cause: Reading a data file failed during the loading of an on-disk version of the data object into the buffer. This is a system error.

Action: Check log for the error information in detail and determine why the file reading is failed.
004129 ERROR read buffer overflow (MAX=%d)\n

Cause: The read buffer limit {max} was reached while attempting to read an on-disk version of the data object into the buffer.

Action: Check the LifeKeeper configuration and restart the LifeKeeper.
004130 ERROR close(%s)

Cause: Failed to close a data file during reading an on-disk version of the data object into the buffer. This is a system error.

Action: Check log for the error information in detail and determine why the file close is failed.
004131 ERROR rename(%s, %s)

Cause: Failed to rename a temporary data file during reading an on-disk version of the data object into the buffer. This is a system error.

Action: Check log for the error information in detail and determine why the file renaming is failed.
004132 ERROR Can’t open %s : %s

Cause: Failed to open a directory {directory} with error {error} during reading an on-disk version of the application and resource type information into the buffer. This is a system error.

Action: Check log for the error information in detail and determine why the open directory is failed.
004133 ERROR path argument may not be NULL

Cause: The command "lcdrcp" failed during a file copy because the input source path is missing.

Action: Check the input source path and retry "lcdrcp".
004134 ERROR destination path argument may not be NULL

Cause: The "lcdrcp" command failed during a file copy because the input destination path is missing.

Action: Check the input destination path and retry "lcdrcp".
004135 ERROR destination path can’t be zero length string

Cause: Input destination path was empty during file copy when using "lcdrcp".

Action: Check the input destination path and retry "lcdrcp".
004136 ERROR open(%s)

Cause: Failed to open source file path during file copy using "lcdrcp". This is a system error.

Action: Check the existence/availability of the input source path and retry "lcdrcp". Also check the related log for error information in detail.
004137 ERROR fstat(%s)

Cause: Failed to fetch file attributes using "fstat" during file copy by "lcdrcp". This is a system error.

Action: Check the log for error information in detail.
004138 ERROR file \"%s\" is not an ordinary file (mode=0%o)

Cause: Detected source file as a none ordinary file during file copy using "lcdrcp".

Action: Check the input source file path and retry "lcdrcp".
004139 ERROR read(%s,%lu){%*.*s}
004140 ERROR read %d bytes of %lu bytes of file \"%s\"
004141 ERROR mkdirp(%s,0755)
004142 ERROR stat(%s)
004143 ERROR existing destination path \"%s\" has mode 0%o
004145 ERROR open(%s,0x%x,0%o)
004146 ERROR fchmod(%s,0%o)
004147 ERROR fchown(%s,%u,%u)
004148 ERROR lseek(%s,%u)
004149 ERROR write(%s,%u)
004150 ERROR only %u bytes written of %lu to file \"%s\"
004151 FATAL lcdMalloc failure

Cause: Failed to allocate memory with requested size in shared memory.

Action: A fatal error will be produced.
004152 ERROR having \"%s\" depend on \"%s\" would produce a loop

Cause: Adding the requested dependency would produce a loop of dependent relationship.

Action: Correct the requested dependency and retry the dependency creation.
004153 ERROR must define object first with ::create() or ::fill()
004154 ERROR child() only works on local objects
004155 ERROR must define object first with ::create() or ::fill()
004156 ERROR parent() only works on local objects
004157 ERROR must specify parent tag to get child dependencies
004158 ERROR must specify child tag to get parent dependencies
004160 FATAL attempt to access empty dependency list
004161 FATAL index %d past range 0-%d
004162 ERROR must specify parent name of dependency
004163 ERROR must specify child name of dependency
004164 ERROR Priority mismatch between resources %s and %s. Dependency creation failed.

Cause: The priorities for {resource1} and {resource2} do not match.

Action: Resource priorities must match. Change one or both priorities to the same value and retry creating the dependency.
004165 ERROR The selected child and parent for the dependency have a conflicting relationship on other systems where the equivalent resources exist. Dependency creation failed.
004166 ERROR both parent and child of dependency can’t be left unspecified
004167 ERROR COMMAND OUTPUT: %s
004168 FATAL number of list elements has exceeded %d\n
004169 ERROR COMMAND OUTPUT: %s
004174 FATAL sigprocmask
004175 FATAL sigprocmask
004176 ERROR %s

Cause: The command "doabort" failed to create the {directory} for writing the core file. This is a system error.

Action: Check the logs for related errors and try to resolve the reported problem.
004177 ERROR %s
004178 ERROR fileno(stderr)
004179 ERROR sigset(SIGABRT)
004180 ERROR sigrelse(SIGABRT)
004182 ERROR received signal %d\n

Cause: Received signal {signum}.
004183 FATAL lcdinitsig;sig=%d
004184 FATAL lcdinitsig;default:signal=%d
004185 ERROR %s: ::receive(%d) had bad name error on incoming_mailbox %s
004186 ERROR %s: ::receive(%d) protocol error on incoming_mailbox %s

Cause: In function {function}, attempting to receive message within timeout {timeout} seconds failed due to a non-idle status of incoming mailbox {mailbox}.

Action: Check the status of the connections inside the cluster and retry the process.
004187 ERROR %s: ::receive(%d) returned NULL message pointer and ::last_err()==r_okay on incoming_mailbox %s
004188 ERROR %s: ::receive(%d) had unknown ::last_err() status %d on incoming_mailbox %s
004189 ERROR %s: ::receive(%d) returned NULL message pointer on incoming_mailbox %s
004190 ERROR %s: ::receive(%d) did not receive message within %d seconds on incoming_mailbox %s

Cause: In function {function}, attempting to receive message within timeout {timeout} seconds failed with incoming mailbox {mailbox}.

Action: Check the status of the connections inside the cluster and retry the process.
004191 ERROR no system specified for remote execution of \"%s\"
004192 ERROR no mailbox specified for remote execution of \"%s\"
004193 ERROR retbuf can’t be NULL
004194 ERROR retp can’t be NULL
004195 ERROR Can’t find return value in return buffer. Possible buffer overflow caused by the size of the returned data.
004198 ERROR retbuf is NULL
004199 ERROR lcdsendmes: can’t set data on message
004200 ERROR lcdsendmes: can’t set data on message
004201 ERROR lcdsendmes: can’t set reply system
004202 ERROR lcdsendmes: can’t set reply mailbox
004204 ERROR attempt to send illegal message

Cause: Sending message failed due to a illegal message.
004205 ERROR destination system \"%s\" is unknown

Cause: Sending message failed due to an unknown destination system name {system}.

Action: Check the configuration and status of the system and check the logs for related errors. Retry the same process after the system is full initialized.
004206 ERROR destination mailbox \"%s\" at system \"%s\" is unknown

Cause: Sending message failed due to an unknown mailbox {mailbox} on destination system name {system}. This error may be caused by sending a message before the LCD is fully initialized.

Action: Check the configuration and status of the system and check the logs for related errors. Retry the same process after the system is full initialized.
004207 ERROR destination mailbox \"%s\" at system \"%s\" is full. Trying Again …
004208 ERROR destination system \"%s\" is alive but the \"%s\" mailbox process is not listening.

Cause: Sending message failed. The network connection to destination system {system} is alive but the contact to the destination mailbox is lost.

Action: Check the configuration and status of the system and check the logs for related errors. Retry the same process after the system is full initialized.
004209 ERROR destination system \"%s\" is dead.

Cause: Sending message failed due to losing connection with the destination system {system}.

Action: Check the configuration and status of the system and check the logs for related errors. Retry the same process after the system is full initialized.
004210 WARN destination system \"%s\" is temporarily dead. will try again later…
004211 ERROR can’t send to destination \"%s\" error=%d

Cause: Sending message to destination system {system} failed due to internal error {error}.

Action: Check the logs for related errors and try to resolve the reported problem.
004212 ERROR lcdsendmes: unexpected error
004217 ERROR destination system \"%s\" is out of service.

Cause: Sending message failed due to losing connection with the destination system {system}.

Action: Check the configuration and status of the system and check the logs for related errors. Retry the same process after the system is full initialized.
004221 ERROR destination system \"%s\" went out of service.

Cause: Sending message failed due to losing connection with the destination system {system}.

Action: Check the configuration and status of the system and check the logs for related errors. Retry the same process after the system is full initialized.
004223 ERROR received message with zero length on private mailbox %s
004224 ERROR lcdsendremote: unknown message type=%d(‘%c’) received by machine \"%s\"
004225 ERROR illegal net type
004226 ERROR net type must not be ILLNET
004227 ERROR baud rate must be between B0 and B38400
004228 ERROR Can’t get host name from getaddrinfo()

Cause: Creating network object failed due to a failure when getting host name using "getaddrinfo()".

Action: Check the configuration and status of the system. Do the same process again.
004229 ERROR Can’t get host name from getaddrinfo()
004230 ERROR device %s no such file or directory \n
004231 ERROR stat of device %s failed errno=\n
004232 ERROR device %s not a character special file\n
004233 ERROR device %s already in use
004234 ERROR IP address pair %s already in use

Cause: Creating network object failed due to the IP address pair {pair} is already used for a TCP communication path.

Action: Check the input IP address pair and do the network creation again.
004244 ERROR %s Will try port \"%s\" instead.
004246 ERROR no response heard from system \"%s\" on TTY port \"%s\" to reply box \"%s\" in %d seconds
004247 ERROR %s
004248 ERROR failed to allocate %dB message buffer
004250 ERROR %s Will try port \"%s\" instead.
004253 ERROR %s message failure by port %s siz=%d
004254 WARN no response heard from system \"%s\" on TTY port \"%s\" to reply box \"%s\" in %d seconds (siz=%d)
004255 ERROR %s
004256 ERROR %s
004258 WARN Communication to %s by %s FAILED

Cause: Communication to system {system} by communication path {path} failed.

Action: Check system configuration and network connection.

004261 WARN COMMUNICATIONS failover from system \"%s\" will be started.

Cause: A failover from system {system} will be started due to all the communications path are down.

Action: Check system configuration and network connection status. Confirm the system status when failover is done.
004263 ERROR can not set read pid if network type is TCP
004264 ERROR can’t remotely set read pid
004265 ERROR can’t remotely increment statistics
004266 ERROR can only set write pid if network type is TTY
004267 ERROR can’t remotely set write pid of TTY object
004268 ERROR can not set baud if network type is TCP
004269 ERROR baud rate must be between B0 and B38400
004270 ERROR can’t set network type to ILLNET
004271 ERROR object already has this nettype
004272 ERROR system \"%s\" device \"%s\" never had its net type set
004273 FATAL internal buffer too small
004274 ERROR must specify new network name
004275 ERROR must define network type when it is being created
004276 ERROR priority must be in range 1 thru 99
004279 FATAL prefix_lkroot("config/LK_START_TIME"));
004281 ERROR must specify original network name
004282 ERROR must specify original device path
004283 ERROR new system \"%s\" and device \"%s\" can’t be same as old system and device
004284 ERROR new system \"%s\" can’t be same as old system \"%s\"
004285 ERROR
004286 ERROR new system \"%s\" and device \"%s\" can’t be same as old system and device
004288 FATAL illegal timeout baud %d
004292 ERROR resource \"%s\" %s

Cause: A resource could not be brought in service because its current state is unknown.

Action: Check the logs for related errors and try to resolve the reported problem.
004293 ERROR resource \"%s\" %s

Cause: A resource could not be brought into service because its current state disallows it.

Action: Check the logs for related errors and try to resolve the reported problem.
004294 ERROR resource \"%s\" requires a license (for Kit %s/%s) but none is installed

Cause: The resource’s related recovery kit requires a license.

Action: Install a license for the recovery kit on the server where the resource was to be brought into service.
004295 ERROR The current number of in-service \"%s/%s\" resources (=%d) has already reached or exceeded the maximum allowed (=%d). Resource \"%s\" can not be restored at this time. To remove this restriction contact your SIOS Technology sales representative.
004296 ERROR The total number of \"%s/%s\" resources (=%d) in the system exceeds the maximum allowed (=%d). No resources of this type will be restored until the number is reduced to the maximum allowed or less. Resource \"%s\" can not be restored at this time. To remove this restriction contact your SIOS Technology sales representative.
004297 ERROR secondary remote resource \"%s\" on machine \"%s\" is already in-service, so resource \"%s\" on machine \"%s\" can’t be brought in-service.

Cause: A resource {resource} could not be brought into service on machine {machine} because its secondary remote resource {resource} is already in service on machine {machine}.

Action: Manually change the remote resource out of service and do in service on local resource again.
004298 ERROR remote resource \"%s\" on machine \"%s\" is still in-service, restore of resource \"%s\" will not be attempted!\n
004300 ERROR restore of resource \"%s\" has failed

Cause: A resource could not be brought into service.

Action: Check the logs for related errors and try to resolve the reported problem.
004301 ERROR exceeded internal maximum number of resources to restore (%d)
004302 ERROR exceeded internal maximum number of resources to restore (%d)
004303 ERROR resource \"%s\" not found
004304 ERROR restore() can’t restore resource \"%s\"
004311 ERROR can’t perform \"remove\" action on resources in state \"%s\"

Cause: A resource could not be put out of service due to the current state being {state}.

Action: Check the logs for related errors and try to resolve the reported problem.
004313 ERROR remove of resource \"%s\" has failed

Cause: A resource {resource} could not be put out of service.

Action: Check the logs for related errors and try to resolve the reported problem.
004318 ERROR %s,priv_globact(%d,%s): script %s FAILED returning %d

Cause: A global action script failed with the specified error code.

Action: Check the logs for related errors and try to resolve the reported problem.
004322 ERROR %s,priv_globact(%d,%s): script %s FAILED returning %d
004326 ERROR %s,priv_globact(%d,%s): cmd \"%s\" returned error \"%d\" retbuf=\"%s\"
004330 ERROR can’t run all pre global stripts together
004332 ERROR action \"%s\" has failed on resource \"%s\"

Cause: A resource action failed.

Action: Check the logs for related errors and try to resolve the reported problem.
004334 ERROR action \"%s\" has failed on resource \"%s\"
004335 ERROR setpriority(PRIO_PROCESS, 0, %d)
004336 FATAL execl(%s)
004337 ERROR fork(%s)
004338 ERROR waitpid failed (%s)
004339 ERROR child killed by signal %d (%s)
004340 ERROR child stopped by signal %d (%s)
004341 ERROR child continued (%s)
004342 ERROR unknown stoppage of child (%s)
004344 ERROR first tag is NULL or zero length
004345 ERROR second tag is NULL or zero length
004346 ERROR equivalency type must not be ILLEQV
004347 ERROR priority values cannot be zero for a SHARED equivalency
004348 ERROR both resources of the equivalency are the same
004349 ERROR resource \"%s\" cannot be remote for a \"%s\" equivalency
004350 ERROR resource \"%s\" cannot be remote for a \"%s\" equivalency
004351 ERROR a \"%s\" equivalency must have one remote resource

Cause: Creating of a {eqvtype} equivalency failed due to the two input tag names exist on the same system.

Action: Correct the inputs resource tag names and do the same process again.
004352 ERROR both resources of a \"%s\" equivalency must not be remote
004356 WARN Use unsupported option %s for remove. This option may be removed in future upgrades.
004357 ERROR Priority of system \"%s\" for resource \"%s\" must be the same in all equivalencies
004358 ERROR Priority conflict. Remote priority value %u for resource \"%s\" is already assigned to another system
004360 ERROR \"%s\", \"%s\" is not a shared resource
004361 ERROR \"%s\", \"%s\" is not a shared resource
004367 ERROR both resources of the equivalency are the same
004370 FATAL attempt to access empty equivalency list
004371 FATAL index %d past range 0-%d
004372 FATAL internal buffer too small
004375 FATAL sigset(SIGALARM) failed
004376 FATAL wait period of %u seconds for LCM to become available has been exceeded (lock file \"%s\" not removed)

Cause: The LCM daemon did not become available within a reasonable time and the LCD cannot operate without the LCM.

Action: Check the logs for related errors and try to resolve the reported problem.
004377 ERROR in %s, %s is not a valid value for %s\n
004378 FATAL mpcntl(MPCNTL_BIND)
004380 ERROR initlcdMalloc;ftok
004381 ERROR initlcdMalloc;shmget
004382 ERROR initlcdMalloc;shmctl
004383 ERROR initlcdMalloc;shmget
004384 ERROR initlcdMalloc;shmget
004385 ERROR initlcdMalloc;shmget,IPC_EXCL
004386 ERROR initlcdMalloc;shmget

Cause: A shared memory segment could not be initialized.

Action: Check the logs for related errors and try to resolve the reported problem. Review the product documentation and ensure that the server meets the minimum requirements and that the operating system is configured properly.
004387 ERROR initlcdMalloc;shmat
004388 ERROR nsbrk: allocation overflow linno=%d incr=%d\n
004389 WARN flag initialisation: removing stale flag %s\n
004390 WARN flag initialisation: removing insane flag %s\n
004391 FATAL internal buffer too small
004392 FATAL action_has_finished() called before wait_for_action()
004393 FATAL can’t find my wait flag=%s
004394 FATAL expected wait flag \"%s\", found \"%s\"
004395 FATAL can’t remove my wait flag %s
004396 ERROR process pid=%d
004399 ERROR argument must be of form machine:flag
004401 WARN wait_for_action: deleting insane flag %s\n
004402 FATAL can’t find my wait flag=%s
004405 ERROR chk_man_interv: Unable to create flag file <%s>, using default CONFIRMSODEF value %d.
004406 ERROR chk_man_interv: Unable to write to flag file <%s>, using default CONFIRMSODEF value %d.
004407 ERROR chk_man_interv: Unable to invoke sendevent, using default CONFIRMSODEF value %d.
004410 ERROR wait_for_action flag %s is already held by process %d\n
004412 FATAL wait_for_action: curpid=%d
004413 WARN wait_for_action: admin flag %s removed because owner terminated
004415 ERROR acquisition of lock %s timed out after %d tries\n
004416 WARN Caller process %d has disappeared – removing admin flag\n
004419 ERROR must specify flag name
004420 ERROR must specify new flag name
004422 ERROR must specify flag name to remove
004425 ERROR index of \"%d\" past maximum \"%d\"
004426 ERROR object empty; use ::create() first
004427 ERROR object empty; use ::fill() first
004428 ERROR new field not specified properly
004429 ERROR index of \"%d\" past maximum \"%d\"
004430 ERROR object empty; use ::create() first
004431 ERROR object empty; use ::fill() first
004432 ERROR can’t change field because %s already in use
004433 ERROR use ::create() on local objects
004434 ERROR new name not specified properly
004435 ERROR object has already been created as %s
004436 ERROR new name not specified properly
004437 ERROR local object %s was not allocated using C++ \"new\" operator
004438 ERROR remote object %s for system \"%s\" must not be allocated using C++ \"new\" operator
004440 ERROR index %d past range 0-%d ondx=%d
004441 ERROR attempt to access empty base list ondx=%d
004442 FATAL failed to compile requires regexp, err=%d
004443 FATAL failed to compile except regexp, err=%d
004444 WARN License key (for Kit %s/%s) has EXPIRED

Cause: Your license has expired.

Action: Contact Support to obtain a new license.
004445 WARN License key (for Kit %s/%s) will expire at midnight in %ld days

Cause: Your license is about to expire.

Action: Contact Support to obtain a new license.
004446 ERROR %s
004447 ERROR must specify application name
004448 ERROR must specify resource type name
004449 ERROR must specify resource type name
004450 ERROR must specify application
004453 ERROR resource type \"%s\" for application \"%s\" is unknown on machine \"%s\"
004454 ERROR can’t remove entry for local system \"%s\"
004455 ERROR can’t set network type to ILLSYS
004457 FATAL internal buffer too small
004458 ERROR must specify new system name
004459 ERROR must specify system name to remove
004461 ERROR must specify system name
004462 ERROR system \"%s\" not defined on machine \"%s\".
004463 ERROR must specify system name
004464 ERROR system \"%s\" not defined on machine \"%s\".
004465 ERROR must specify system name
004466 ERROR system \"%s\" not defined on machine \"%s\".

Cause: The specified system name is not known.

Action: Verify the system name, and try the operation again.
004467 ERROR system \"%s\" unknown on machine \"%s\"

Cause: The specified system name is not recognized.

Action: Verify the system name, and try the operation again.
004468 ERROR %s
004469 ERROR must specify new application name
004470 ERROR must specify application name to remove
004472 ERROR application \"%s\" unknown on machine \"%s\"
004473 FATAL new not allowed for lcdlock
004474 FATAL delete not allowed for lcdlock
004475 FATAL ftok(%s, %d)
004476 FATAL can’t exclusively create semaphore set
004477 FATAL can’t get semid of semaphore set
004478 FATAL can’t remove semaphore set
004479 FATAL can’t create new semaphore set
004480 FATAL can’t get semid of semaphore set
004481 FATAL can’t initialize semaphore set
004483 FATAL can’t obtain LCD daemon semaphore
004485 WARN can’t get key for GUI semaphore
004486 WARN can’t get GUI semaphore
004487 FATAL tag index %d must be less than %d
004488 FATAL tag %d already in use
004489 FATAL tag index %d must be less than %d
004490 FATAL destructed lock %d without releasing it first
004491 FATAL must specify lock request using rl() or wl()
004492 ERROR can’t get semaphore semvals
004493 FATAL attempt to pop empty lock stack at[%d,%s]
004494 ERROR COMMAND OUTPUT: %s

Cause: An action or event script produced unexpected output.

Action: Check the logs for related errors and try to resolve the reported problem.
004495 ERROR COMMAND OUTPUT: %s

Cause: An action or event script produced unexpected output.

Action: Check the logs for related errors and try to resolve the reported problem.
004496 ERROR COMMAND OUTPUT: %s

Cause: An action or event script produced unexpected output.

Action: Check the logs for related errors and try to resolve the reported problem.
004497 ERROR COMMAND OUTPUT: %s

Cause: An action or event script produced unexpected output.

Action: Check the logs for related errors and try to resolve the reported problem.
004498 ERROR COMMAND OUTPUT: %s

Cause: An action or event script produced unexpected output.

Action: Check the logs for related errors and try to resolve the reported problem.
004499 ERROR COMMAND OUTPUT: %s

Cause: An action or event script produced unexpected output.

Action: Check the logs for related errors and try to resolve the reported problem.
004500 ERROR COMMAND OUTPUT: %s

Cause: An action or event script produced unexpected output.

Action: Check the logs for related errors and try to resolve the reported problem.
004501 ERROR COMMAND OUTPUT: %s

Cause: An action or event script produced unexpected output.

Action: Check the logs for related errors and try to resolve the reported problem.
004502 ERROR COMMAND OUTPUT: %s

Cause: An action or event script produced unexpected output.

Action: Check the logs for related errors and try to resolve the reported problem.
004503 ERROR COMMAND OUTPUT: %s

Cause: An action or event script produced unexpected output.

Action: Check the logs for related errors and try to resolve the reported problem.
004504 ERROR COMMAND OUTPUT: %s

Cause: An action or event script produced unexpected output.

Action: Check the logs for related errors and try to resolve the reported problem.
004505 ERROR COMMAND OUTPUT: %s

Cause: An action or event script produced unexpected output.

Action: Check the logs for related errors and try to resolve the reported problem.
004506 ERROR COMMAND OUTPUT: %s

Cause: An action or event script produced unexpected output.

Action: Check the logs for related errors and try to resolve the reported problem.
004507 ERROR COMMAND OUTPUT: %s

Cause: An action or event script produced unexpected output.

Action: Check the logs for related errors and try to resolve the reported problem.
004508 ERROR COMMAND OUTPUT: %s

Cause: An action or event script produced unexpected output.

Action: Check the logs for related errors and try to resolve the reported problem.
004509 ERROR COMMAND OUTPUT: %s

Cause: An action or event script produced unexpected output.

Action: Check the logs for related errors and try to resolve the reported problem.
004510 ERROR COMMAND OUTPUT: %s

Cause: An action or event script produced unexpected output.

Action: Check the logs for related errors and try to resolve the reported problem.
004511 ERROR COMMAND OUTPUT: %s

Cause: An action or event script produced unexpected output.

Action: Check the logs for related errors and try to resolve the reported problem.
004512 ERROR

Cause: An error occured on the remote machine.

Action: Check the logs on the remote machine for additional details.
004513 ERROR \"%s\" may not contain white space characters
004516 ERROR must define object first with ::create() or ::fill()
004517 ERROR must define object first with ::create() or ::fill()
004518 ERROR must define object first with ::create() or ::fill()
004519 ERROR must define object first with ::create() or ::fill()
004520 ERROR must define object first with ::create() or ::fill()
004521 ERROR must define object first with ::create() or ::fill()
004522 ERROR must define object first with ::create() or ::fill()
004523 ERROR must define object first with ::create() or ::fill()
004524 ERROR must define object first with ::create() or ::fill()
004525 ERROR must define object first with ::create() or ::fill()
004526 ERROR must define object first with ::create() or ::fill()
004527 ERROR must define object first with ::create() or ::fill()
004528 ERROR must define object first with ::create() or ::fill()
004529 ERROR id \"%s\" already is use by resource \"%s\"
004530 ERROR list pointer is NULL
004531 ERROR buffer pointer is NULL
004532 ERROR list pointer is NULL
004533 ERROR event class must not be NULL
004534 ERROR event type must not be NULL
004535 ERROR list pointer is NULL
004538 ERROR event class must not be NULL
004539 ERROR event type must not be NULL
004540 ERROR list pointer is NULL
004542 ERROR event class must not be NULL
004543 ERROR event type must not be NULL
004544 ERROR must define object first with ::create() or ::fill()
004545 ERROR only local access is allowed
004546 ERROR must define object first with ::create() or ::fill()
004547 ERROR buffer pointer is NULL
004548 ERROR must define object first with ::create() or ::fill()
004558 ERROR must define object first with ::create() or ::fill()
004560 ERROR \"%s\" may not contain ^A character
004563 ERROR can’t set resource init type to ILLINIT
004564 ERROR must define object first with ::create() or ::fill()
004565 ERROR can’t set resource state type to ILLSTATE

Cause: An attempt was made to put a resource in an illegal state.

Action: Do not try to put a resource into an illegal state.
004566 ERROR must define object first with ::create() or ::fill()
004567 ERROR split brain detected while setting resource \"%s\" to \"%s\" state (SHARED equivalency to resource \"%s\" on machine \"%s\" which is in state \"%s\"). Setting local resource ISP but aborting the operation.

Cause: Changing resource {resource} to state {state} failed since its SHARED equivalent resource {resource} on machine {machine} is in state {state}.

Action: A split brain situation has occurred. The failover operation has been aborted. You should manually put the split brain resources (ISP on multiple systems) in the proper state.
004568 ERROR split brain detected while setting resource \"%s\" to \"%s\" state (SHARED equivalency to resource \"%s\" on machine \"%s\" which is in state \"%s\"). Setting local resource ISP but aborting the operation.

Cause: Changing resource {resource} to state {state} failed since its SHARED equivalent resource {resource} on machine {machine} is in state {state}.

Action: A split brain situation has occurred. The failover operation has been aborted. You should manually put the split brain resources (ISP on multiple systems) in the proper state.
004600 ERROR is_on_primary: tag name can’t be NULL
004603 ERROR no resource has an equivalency in resource hierarchy containing resource with tag \"%s\"
004605 ERROR findins: both tag and id can’t be NULL
004606 ERROR no resource instance has either a tag \"%s\" or an identifier \"%s\"
004607 ERROR no resource instance has tag \"%s\"

Cause: No resource with the provided tag exists.

Action: Provide a valid tag, or check the logs for related errors and try to resolve the reported problem.
004608 ERROR no resource instance has identifier \"%s\"

Cause: No resource exists with the provided identifier.

Action: Provide a valid identifier, or check the logs for related errors and try to resolve the reported problem.
004614 ERROR can’t set init state to ILLINIT
004615 ERROR application name argument illegal
004616 ERROR resource type name argument illegal
004617 ERROR tag argument illegal
004618 ERROR identifier argument illegal
004619 ERROR resource with tag \"%s\" already exists with identifier \"%s\"

Cause: The provided tag name already exists.

Action: Choose a different tag name.
004620 ERROR resource with identifier \"%s\" already exists with tag \"%s\"

Cause: The provided identifier already exists.

Action: Choose a different identifier to use for this resource.
004621 ERROR The current number of \"%s/%s\" resources (=%d) has already reached or exceeded the maximum allowed (=%d). The \"%s\" resource can not be created at this time. To remove this restriction contact your SIOS Technology sales representative.
004636 FATAL attempt to access empty resource list
004637 FATAL index %d past range 0-%d
004643 ERROR Instance tag name is too long. It must be shorter than %d characters.

Cause: Tag name is too long.

Action: Provide a tag name that is less than 256 characters.
004644 ERROR Instance id is too long. It must be shorter than %d characters.
004645 ERROR Instance info field is too long. It must be shorter than %d characters.
004646 ERROR Tag name contains illegal characters

Cause: Tag name contains an illegal character.

Action: Specify a tag name that does not include one of these characters: _-./
004657 ERROR undeleted instance \"%s\" depends on instance \"%s\" that is to be deleted
004667 ERROR ERROR: Could not lock child, moving on to next one\n
004668 ERROR ERROR: fork failed. continuing to next dependent\n
004671 ERROR ERROR: wait() error\n
004672 ERROR ERROR: clone %d is hung, attempting to kill it\n
004673 ERROR ERROR: Could not kill clone %d\n
004676 FATAL Lcd_shgp->roots is NULL
004681 ERROR malloc error
004689 ERROR can’t force global delete actions if remove initialization is turned off
004690 ERROR can’t specify app, typ, id or tag when top is set
004691 ERROR can’t set both tag and identifier at same time

Cause: Both a tag and an identifier were specified.

Action: Provide only one of tag or identifier.
004692 ERROR can’t set application when tag or id is set
004693 ERROR can’t set resource type when tag or id is set
004694 ERROR must specify at least one argument
004710 FATAL number of list elements has exceeded %d\n
004711 ERROR can’t set both tag and identifier at same time
004712 ERROR can’t set application when tag or id is set
004713 ERROR can’t set resource type when tag or id is set
004720 ERROR must specify tag to get parents
004721 ERROR must specify tag to get parents
004723 ERROR attempt to change state of resource \"%s\" from OSF state to the %s state from COMMON equivalency
004724 ERROR attempt to change state of resource \"%s\" from OSF state to the %s state from COMMON equivalent resource \"%s\" on machine \"%s\"
004727 ERROR reserve_resources(%s,%s): getpgid FAIL
004728 ERROR Lcd_shgp->roots is NULL
004731 ERROR reserve type set to LCDRESRV_NONE
004732 ERROR reserve_resources(%s,%s): setsid() FAIL
004734 ERROR Process %d in process group %d tried %d times to reserve resources but failed.
004735 FATAL reserve type set to LCDRESRV_NONE
004736 FATAL reserve type set to LCDRESRV_NONE
004737 FATAL Lcd_shgp->roots is NULL
004738 FATAL clr_res(%d): getpgid FAIL
004739 ERROR Process %d in process group %d attempted to clear reservation on resource \"%s\" by process %d in group %d expecting it to be reserved by process %d.
004740 ERROR \"%s\" may not contain ctrl characters
004741 ERROR \"%s\" may not contain ctrl characters
004742 ERROR chk_man_interv: Unable to open flag file <%s>, using default CONFIRMSODEF value %d.
004743 ERROR chk_man_interv: Invalid instruction %d in flag file <%s>, using default CONFIRMSODEF value %d.
004744 ERROR chk_man_interv: CONFIRMSODEF value apparently invalid, using %d instead
004745 ERROR failed to access lkexterrlog path=%s

Cause: The utility "lkexterrlog" can not be accessed for collecting system information.

Action: Check the installation of package "steeleye-lk" and make sure the utility "lkexterrlog" is accessible.
004746 ERROR lkexterrlog failed runret=%d cmdline=%s

Cause: The execution of utility "lkexterrlog" failed when collecting system information.

Action: Check the logs for related errors and try to resolve the reported problem.
004776 ERROR failed to read the temporal recovery policy log.
004779 ERROR resource \"%s\" with id \"%s\" has %s
004780 ERROR local recovery is disabled by the current settings. The recovery of resource \"%s\" will not be attempted.
004781 ERROR Local recovery is disabled by the temporal recovery settings. The recovery of resource \"%s\" will not be attempted.
004782 ERROR Resource \"%s\" was in state \"%s\" before event occurred – recovery will not be attempted

Cause: The resource is already in service. Recovery will not be attempted.
004783 ERROR Resource \"%s\" was already in state \"%s\" before event occurred

Cause: A resource was not in an appropriate state to allow recovery.

Action: Put the resource in the ISP state if recovery is still needed.
004786 ERROR %s on failing resource \"%s\"

Cause: An error occured why attempting to recover a resource.

Action: Check the logs for related errors and try to resolve the reported problem.
004787 ERROR Failover is blocked by current settings. MANUAL INTERVENTION IS REQUIRED
004788 EMERG failed to remove resource ‘%s’. SYSTEM HALTED.

Cause: A error occur that prevented a resource from being taken out of service during a recovery. The system has been restarted to ensure the resource is not active on two systems.

Action: Check the logs for related errors and try to resolve the reported problem.
004793 ERROR lcdsendremote transfer resource \"%s\" to \"%s\" on machine \"%s\" failed (rt=%d)

Cause: A failure occured while transfering a resource and it’s dependencies to another system.

Action: Check the logs for related errors and try to resolve the reported problem. Check the log on the other system for related errors.
004797 ERROR Restore of SHARED resource \"%s\" has failed

Cause: There was an error while restoring a resource.

Action: Check the logs for related errors and try to resolve the reported problem.
004798 ERROR SHARED resource \"%s\" is being restored because machine \"%s\" has failed
004799 ERROR Restore of resource \"%s\" has failed – initiating inter-machine recovery
004805 ERROR ADDLIST_ERROR for \"%s\"
004806 ERROR Restore in parallel of resource \"%s\" has failed; will re-try serially

Cause: Parallel recovery failed. Check the logs for related errors and try to resolve the reported problem.

Action: No action is required. The system will continue to recover serially. If the recovery fails, check for error messages related to the resources which failed to recover to find out what further actions to take.
004810 ERROR Attempting serial recovery due to possible parallel recovery failure
004811 WARN The sendevent resource lists are too large for the %d byte buffer. The resource length is: %d.
004812 ERROR malloc failure
004813 ERROR lock_open_trp_lock(): failed to open file: %s.
004814 ERROR increase_trs_buffer(): failed to reallocate buffer for temporal_recovery_stamp.
004815 ERROR add_entry_into_trs_buffer(): failed to malloc initial buf for temporal_recovery_stamp.
004816 ERROR add_entry_into_trs_buffer(): failed to increase buf for temporal_recovery_stamp.
004817 ERROR read_temporal_recovery_policy(): fail to read policy configurations.
004819 ERROR read_temporal_recovery_log(): failed to fopen file: %s. fopen() %s.

Cause: The opening of the temporal recovery log file {file} in preparation for loading into it into memory failed with the error {error}.

Action: Check system log files and correct any reported errors before retying the operation.
004820 ERROR read_temporal_recovery_log(): failed to malloc initial buf for temporal_recovery_stamp.

Cause: Loading the temporal recovery log information into memory failed when attempting to acquire memory to store the log information.

Action: Check system log files and correct any reported errors before retying the operation.
004821 ERROR read_temporal_recovery_log(): failed to reallocate buffer for temporal_recovery_stamp.

Cause: Loading the temporal recovery log information into memory failed when attempting to increase the amount of memory required to store the log information.

Action: Check system log files and correct any reported errors before retrying the operation.
004822 ERROR write_temporal_recovery_log(): failed to open file: %s.

Cause: The update of the temporal recovery log file was terminated when the open of the temporary file {temporary name} failed.

Action: Check system log files and correct any reported errors before retrying the operation.
004823 ERROR rename(%s, %s) failed.

Cause: The update of the temporal recovery log file was terminated when the rename of the temporary file {temporary name} to the real log file {real name} failed.

Action: Check system log files and correct any reported errors before retrying the operation.
004827 ERROR %s: [%d,%s] ERROR IN LOCK FUNCTIONS
004829 FATAL err=%s line=%d Semid=%d numops=%zd perror=%s

Cause: The modification of semaphore ID {semaphore} failed with error {err} and error message description {perror}.

Action: Check adjacent log messages for more details. Also, check the system log files and correct any reported errors before retrying the operation.
004860 ERROR restore ftok failed for resource %s with path %s

Cause: The attempt to generate an IPC key for use in semaphore operations for resource {tag} using path {path} failed. This is a system error.

Action: Check adjacent log messages for more details. Also check system log files and correct any reported errors before retrying the operation.
004861 ERROR semget failed with error %d

Cause: The attempt to retrieve the semaphore identification associated with the instances files has failed. This is a system error.

Action: Check adjacent log messages for more details. Also check system log files and correct any reported errors before retying the operation.
004862 ERROR semctl SEMSET failed with error %d

Cause: The attempt to create and initialize a semaphore used during the recovery process has failed with the error {error number}. This is a system error.

Action: Check adjacent log messages for more details. Also, check system log files and correct any reported errors before retying the operation.
004863 ERROR semop failed with error %d

Cause: The attempt to set a semaphore used during the recovery process has failed with the error {error number}. This is a system error.

Action: Check adjacent log messages for more details. Also, check system log files and correct any reported errors before retying the operation.
004864 ERROR semctl SEMSET failed with error %d

Cause: The attempt to release a semaphore used during the recovery process has failed with the error {error number}. This is a system error.

Action: Check adjacent log messages for more details. Also, check system log files and correct any reported errors before retying the operation.
004865 ERROR restore action failed for resource %s (exit: %d)

Cause: The attempt to bring resource {tag} In Service has failed.

Action: Check adjacent log messages for more details. Correct any reported errors and retry the operation.
004872 ERROR Remote remove of resource \"%s\" on machine \"%s\" failed (rt=%d)

Cause: The request to take resource {tag} Out of Service on {server} for transfer to the local system has failed.

Action: Check adjacent log messages for more details on the local system. Also, check the log messages on {server} for further details on the failure to remove the resource.
004875 ERROR remote remove of resource \"%s\" on machine \"%s\" failed

Cause: The request to take resource {tag} Out of Service on {server} for transfer to the local system has failed.

Action: Check adjacent log messages for more details on the local system. Also, check the log messages on {server} for further details on the failure to remove the resource.
004876 ERROR remote remove of resource \"%s\" on machine \"%s\" failed

Cause: The request to take resource {tag} Out of Service on {server} for transfer to the local system has failed.

Action: Check adjacent log messages for more details on the local system. Also, check the log messages on {server} for further details on the failure to remove the resource.
005000 ERROR poll_handler::get events – polling
005001 WARN poll_hand::get_events() spent %ld secs\n
005002 WARN poll_handler::get_events(): revents = 0x%04x\n
005003 WARN pid %d:
005004 ERROR poll_handler
005005 WARN fd %d:
005006 ERROR setting socket process owner
005007 WARN fd %d:
005008 ERROR getting current socket flags
005009 WARN fd %d:
005010 ERROR setting socket for asynchronous notification
005011 WARN poll_hand::set_poll() spent %ld secs\n
005012 WARN fd %d:
005013 ERROR getting current socket flags
005014 WARN fd %d:
005015 ERROR unsetting socket for asynchronous notification
005016 WARN poll_hand::unset_poll() spent %ld secs\n
005017 WARN po_box::dispatch_msg(): _msg_list.size = %d, _req_list.size = %d\n
005018 WARN po_box::dispatch_msg(): sending ctl part of message, size=%zu\n
005019 WARN WARNING:po_box::dispatch_msg():_bytes_out wrapped around\n
005020 WARN po_box::dispatch_msg(): sending data part of message, size=%zu\n
005021 WARN sent message to driver\n
005022 WARN po_box request for non-existent driver: %s:%s to %s:%s (%s/%u) (%d/%d)\n
005023 WARN WARNING:po_box::put():_bytes_in wrapped around\n
005024 WARN po_box::put_msg – bad command %s\n
005025 WARN po_box::put_msg – bad command %s\n
005026 WARN ctl_po_box %s got bad string (%d) size %ld: %s\n
005027 WARN add_conn dev(%s) lipa(%s)\n
005028 WARN postoffice remove sys/dev %s/%s\n
005029 ERROR fopen of /tmp/mbox_dbg
005030 WARN tli_fdget_i[%u] – device(%s)\n
005031 WARN tli_fdget_i::d’tor spent %ld secs\n
005032 WARN tli_fdget_i::execute get_events() spent %ld secs\n
005033 WARN tli_fdget_i[%u] running, events=0x%x\n
005034 WARN tli_fdget_i[%u]::execute: accept device (%s)\n
005035 ERROR tli_fdget_i::execute accept fails
005036 WARN tli_fdget_i::execute accept() spent %ld secs\n
005037 WARN getnameinfo() failed %s\n
005038 WARN tli_fdget_i[%u]::execute device(%s) ripa(%s) lipa(%s)\n
005039 WARN tli_fdget_i::execute event 0x%hx\n
005040 ERROR tli_fdget_i::execute – getaddrinfo
005041 ERROR tli_fdget_i::execute – creating socket
005042 WARN tli_fdget_i::execute my_socket() spent %ld secs\n
005043 ERROR setsockopt setting SO_REUSEADDR
005044 WARN tli_fdget_i::execute t_bind() spent %ld secs\n
005045 ERROR tli_fdget_i::execute unable to establish a listener port

Cause: A network connection could not be properly configured.

Action: Verify that all network hardware and drivers are properly configured. If this message continues and resources cannot be put into service, contact Support.
005046 WARN tli_fdget_i::execute bind() spent %ld secs\n
005047 ERROR tli_fdget_i::execute listen failed
005049 WARN tli_fdget_o[%u] to %s on dev %s local ip %s remote ip %s\n
005050 WARN tli_fdget_o[%u] to %s on dev %s dies\n
005051 WARN tli_fdget_o::execute get_events() spent %ld secs\n
005052 WARN tli_fdget_o[%u] running, events=0x%x\n
005053 ERROR tli_fdget_o::execute – get SO_ERROR socket option
005054 WARN tli_fdget_o[%u]::execute – established outbound connection to %s at %s\n
005055 ERROR tli_fdget_o::execute – async connect failure

Cause: A network connection could not be properly configured.

Action: Verify that all network hardware and drivers are properly configured. If this message continues and resources cannot be put into service, contact Support.
005056 ERROR COMMAND OUTPUT: %s
005057 WARN tli_fdget_o[%u] runs in alarm loop\n
005058 ERROR tli_fdget_i::execute – getaddrinfo
005059 ERROR tli_fdget_o::execute – creating socket
005060 WARN tli_fdget_o::execute my_socket() spent %ld secs\n
005061 ERROR tli_fdget_o::execute – bind socket

Cause: A network connection could not be properly configured.

Action: Verify that all network hardware and drivers are properly configured. If this message continues and resources cannot be put into service, contact Support.
005062 WARN tli_fdget_o::execute bind() spent %ld secs\n
005063 ERROR LifeKeeper: can’t get service %s, protocol %s\n
005065 ERROR tli_fdget_o::execute – connect
005066 ERROR COMMAND OUTPUT: %s
005067 WARN tli_fdget_o::execute my_connect() spent %ld secs\n
005068 WARN vs_driver[%u]::execute(): Entering\n
005069 WARN vs_driver[%u]::execute(): Before loop, ready()=%d, vstate()=%d\n
005070 WARN vs_driver[%u]::execute(state=_vrhead): Invalid request, going away.\n
005071 WARN vs_driver[%u]::execute(): Receiving data of size %
005072 WARN vs_driver[%u]::execute(): Receive complete.\n
005073 WARN vs_driver[%u]::execute(): Bottom of loop, ready()=%d, vstate()=%d\n
005074 WARN vs_driver[%u]::execute(): Leaving\n
005075 WARN vs_driver[%u]::send: ready()=%d, vstate()=%d\n
005076 WARN lcm_driver[%u]::send(): lstate()=%d\n
005077 WARN lcm_handler[%u]::execute(%d,%p,%p): Entering\n
005078 WARN lcm_hand::exec() spent %ld secs\n
005079 WARN lcm_handler::run(): Got request %d for sys %s, mailbox %s\n
005080 WARN driver %u forwarding request to %u, size %zu\n
005081 WARN lcm_handler::handle_send_msg(): Message from %s:%s to %s:%s\n
005082 WARN forwarding message to %s to dev null\n
005083 WARN driver %u got a ping at %ld\n
005084 WARN handle forward driver %u driver %u gone!\n
005085 WARN _add_driver\n
005086 WARN ..find other\n
005087 WARN ..find this\n
005088 WARN .. driver’s lipa(%s) ripa(%s) sys(%s) dev (%s)\n
005089 WARN .. foundother(%p) foundthis(%p) _add_driver(%x)\n
005090 WARN system_driver::add_driver: cmd=%s\n
005091 WARN did add_driver event for %ld @%ld\n
005092 WARN .. exit _add_driver ret val(%d)\n
005093 WARN _add_driver(tli_fdget_i %p)\n
005094 WARN ..lst(%p)\n
005095 WARN exit _add_driver ret val(1)\n
005096 WARN _add_driver(tli_fdget_o %p)\n
005097 WARN ..lst(%p)\n
005098 WARN exit _add_driver ret val(1)\n
005099 WARN rm_driver %ld – sys %s, dev %s\n
005100 WARN rm_driver %u – sys %s, dev %s @%ld\n
005102 WARN rm_driver – hangup on driver 0\n
005103 WARN exit rm_driver 1\n
005104 WARN exit rm_driver 0\n
005105 WARN rm_driver %u – sys %s, dev %s @%ld\n
005107 WARN rm_driver – hangup on driver 0\n
005108 WARN system_driver::rm_driver: cmd=%s\n
005109 WARN did remove_driver event for %u @%ld\n
005110 WARN rm driver: other driver @%p (%u)\n
005111 WARN _add_odriver_event(system %s driver %s)\n
005112 WARN exit _add_odriver_event(%d)\n
005113 WARN add_odriver(%p)\n
005114 WARN exit add_odriver(%d)\n
005115 WARN _add_idriver_event(system %s driver %s)\n
005116 WARN exit _add_idriver_event(%d)\n
005117 WARN add_idriver(%p)\n
005118 WARN exit add_idriver(%d)\n
005119 WARN rm_odriver(system %s driver %s)\n
005120 WARN exit rm_odriver %d\n
005121 WARN rm_odriver_event(system %s driver %s)\n
005122 WARN exit rm_odriver_event %d\n
005123 WARN rm_idriver(system %s driver %s)\n
005124 WARN exit rm_idriver %d\n
005125 WARN rm_idriver_event(system %s driver %s)\n
005126 WARN exit rm_idriver_event %d\n
005127 WARN find_odriver\n
005128 WARN find_get_odriver\n
005129 WARN exit find_get_odriver %p\n
005130 WARN find_idriver\n
005131 WARN find driver, sys %s, idriver %ld, odriver %ld\n
005132 WARN system_driver::add_connect: adding connection to sys %s, device %s\n
005133 WARN removing connection to sys %s, device %s\n
005134 WARN finding connection to sys %s, device %s\n
005135 WARN found connection\n
005136 WARN didn’t find connection\n
005137 WARN WARNING:ser_num::ser_num():global_num about to wrap around\n
005138 WARN WARNING:ser_num::ser_num(ser_num&):global_num about to wrap around\n
005139 WARN sig_hold %u, attempt to assign invalid signal %d\n
005141 WARN invalid signal %d\n
005142 WARN sys %.8s, box %.8s\n
005143 WARN lcm_pipe::open – socket() failed, err %d, pid %d\n
005144 WARN lcm_pipe::open – connect() failed, err %d, pid %d\n
005145 ERROR opening the file

Cause: A pipe could not be opened or created.

Action: Check adjacent log messages for more details.
005146 WARN In lcm_pipe[%u]::execute(%d,%p,%p)\n
005147 WARN LCM heartbeat interval = %ld\n
005148 WARN LCM missed heartbeat limit = %u\n
005149 WARN LCM missed heartbeat limit = %u\n
005150 WARN tli_handler %u dev %s lipa(%s) ripa(%s)\n
005151 WARN new tli_handler %u on dev %s\n
005152 WARN tli_handler %ld to %s on dev %s\n
005153 WARN new tli_handler %u to %s on dev %s\n
005154 WARN creating new tli_fdget_o on %s to %s\n
005155 WARN tli_hand::d’tor shutdown() spent %ld secs\n
005156 WARN openpoll fd %d\n
005157 WARN done closing fd\n
005158 WARN tli_hand::exec t_look() spent %ld secs\n
005160 WARN tli_handler %u going away (POLLERR) at %ld lastread=%ld lastping=%ld\n
005162 WARN tli_hand::exec %u send a ping at %ld\n
005163 WARN tli_handler::run %u to %s on dev %s\n
005164 ERROR tli_handler::handle-error:sending/receiving data message

Cause: A message failed to be sent or received.

Action: Check adjacent log messages for more details. This may be a temporary error but if this error continues and servers can’t communicate then verify the network configuration on the servers.
005165 WARN errno %d\n

Cause: A message failed to be sent or received.

Action: Check adjacent log messages for more details. This may be a temporary error but if this error continues and servers can’t communicate then verify the network configuration on the servers.
005166 WARN poll 0x%hx\n

Cause: A message failed to be sent or received.

Action: Check adjacent log messages for more details. This may be a temporary error but if this error continues and servers can’t communicate then verify the network configuration on the servers.
005167 WARN handler for sys %s\n

Cause: A message failed to be sent or received.

Action: Check adjacent log messages for more details. This may be a temporary error but if this error continues and servers can’t communicate then verify the network configuration on the servers.
005168 WARN tli_hand::xmit send() spent %ld secs\n
005169 WARN tli_hand::rcv recv() spent %ld secs\n
005170 WARN sig_execute::_handler_func – sig=%d\n
005171 WARN sig_execute::_handler_func – SIGPOLL si_code=0x%x, si_band=0x%lx, si_fd=%d\n
005172 ERROR fdget::fdget – creating socket
005173 ERROR fdget::fdget – binding socket
005174 ERROR fdget::fdget – listen on socket
005175 WARN fdget::fdget() spent %ld secs\n
005176 WARN fdget dtor deleting fd %d\n
005177 WARN fdget::fdget d’tor spent %ld secs\n
005178 ERROR fdget::execute – accepting connection
005179 WARN fdget::exec() spent %ld secs\n
005180 WARN garbage_collection: unknown message\n
005181 WARN Normal Data:\n
005182 ERROR garbage_collection: get normal
005183 WARN cntl[%d]:\n
005184 WARN \n
005185 WARN %02x
005186 WARN \n
005187 WARN data[%d]:\n
005188 WARN \n
005189 WARN %02x
005190 WARN \n
005191 WARN Priority Data:\n
005192 ERROR garbage_collection: get priority
005193 WARN cntl[%d]:\n
005194 WARN \n
005195 WARN %02x
005196 WARN \n
005197 WARN data[%d]:\n
005198 WARN \n
005199 WARN %02x
005200 WARN \n
005201 WARN garbage_collection: invalid peek flag\n
005202 WARN .. new add_tli_handler _ptr (system – %s device – %s)\n
005203 WARN entering todo: current _ptr (system – %s device – %s)\n
005204 WARN deleting add_tli_handler\n
005205 WARN in %u, out %u, me %u\n
005206 WARN idriver last_alarm %ld, mine %ld\n
005207 WARN odriver %u lastread %ld, mine (%u) %ld\n
005208 WARN adding driver with event(tli_handler-%u)\n
005209 WARN i_m_running: @%ld\n
005210 WARN incoming mailbox::is_empty – send 1 failed\n
005211 WARN incoming mailbox::remove – failed\n
005212 WARN incoming_mailbox::receive(), before send\n
005213 WARN incoming_mailbox::receive(), before 1st receive\n
005214 WARN incoming_mailbox::receive(), before 2nd receive\n
005215 WARN incoming_mailbox::receive(), after 2nd receive\n
005216 WARN outgoing_mailbox::can_talk – %s\n
005217 WARN outgoing_mailbox::can_talk – %s\n
005218 WARN outgoing_mailbox::can_talk – %s\n
005219 WARN outgoing_mailbox::can_talk – %s\n
005220 WARN outgoing_mbox::send can’t send request\n
005221 WARN attempt to send null message\n
005222 WARN outgoing_mailbox::send – can’t send data\n
005223 WARN outgoing_mailbox::send – receive failed\n
005224 WARN outgoing_mailbox::send – receive garbled\n
005225 WARN so_driver::handle_error: sending/receiving data message errno %d: %s

Cause: A message failed to be sent or received.

Action: Check adjacent log messages for more details. This may be a temporary error, but if this error continues and servers cannot communicate, verify the network configuration on the servers.
005226 WARN so_driver[%u]::xmit write() writing %zu bytes: <%s>
005227 WARN so_driver::xmit write() failed, errno = %d
005228 WARN so_driver::xmit write() wrote %d bytes: <%s>
005229 WARN so_driver::xmit write() spent %ld secs
005230 WARN so_driver::rcv read() failed, errno = %d
005231 WARN so_driver::rcv read() received %d bytes: <%s>
005232 WARN so_driver::rcv getmsg() spent %ld secs
005233 WARN In so_driver[%u]::execute(%d,…)
005234 WARN In so_driver[%u]::execute(): No action taken
005235 WARN found tcp connection to iwstp\n
005236 WARN didn’t find tcp connection to iwstp\n
005237 WARN lcm_handler retry send from %s:%s to %s:%s (%d)\n
005238 WARN detected duplicate request from %s:%s to %s:%s\n
005239 WARN lcm_handler retry timer set to %d based on lcd remote timeout of %d s (%d s)
005240 WARN clean up stale dup_list entry (%d s): %s:%s to %s:%s last: %s
005241 WARN dup_list: %s %s %s %s %d %d (%d)
005243 WARN add new dup_list entry %s:%s to %s:%s %d %d (%d)
006009 ERROR fork failed: %s
006012 ERROR quickCheck script ‘%s’ (%d) failed to exit after %u seconds. Forcibly terminated. Please examine the script or adjust the LKCHECKINTERVAL parameter in %s.

Cause: A quickCheck script is probably taking too long or hanging.

Action: Perform the steps listed in the message text.
006014 ERROR LKCHECKINTERVAL parameter is too short. It is currently set to %d seconds. It should be at least %ld seconds. Please adjust this parameter in %s and execute ‘kill %d’ to restart the lkcheck daemon.
006028 ERROR fmt, arg );
006029 ERROR Usage:%s [-?] [-f frequency]
006030 ERROR -? print this help summary
006031 ERROR -f number test frequency in seconds
006102 ERROR COMMAND OUTPUT: $LKROOT/bin/sendevent

Cause: This is output from a "sendevent "(event generator) command.

Action: Check adjacent log messages for more details.
006103 ERROR COMMAND OUTPUT: $LKROOT/bin/sendevent

Cause: This is output from a "sendevent" (event generator) command.

Action: Check adjacent log messages for more details.
006104 ERROR COMMAND OUTPUT: $LKROOT/bin/sendevent

Cause: This is output from a "sendevent" (event generator) command.

Action: Check adjacent log messages for more details.
007001 ERROR %s: path in disk.reserve (%d bytes) exceeds maximum path length (%d bytes).
007002 ERROR %s: FAILFASTTIMER is not numeric, using default value (%d).
007003 ERROR %s: FAILFASTTIMER cannot be zero, using default value (%d).
007004 ERROR %s: FAILFASTTIMER is too large, using default value (%d).
007006 ERROR %s: SKIPNOTREADY is not numeric, using default value (%d).
007007 ERROR %s: SKIPNOTREADY is too large, using default value (%d).
007009 ERROR %s: SCSIHANGMAX is not numeric, using default value (%d).
007010 ERROR %s: SCSIHANGMAX cannot be zero, using default value (%d).
007011 ERROR %s: SCSIHANGMAX is too large, using default value (%d).
007013 ERROR %s: ERRORRETRY is not numeric, using default value (%d).
007014 ERROR %s: ERRORRETRY cannot be zero, using default value (%d).
007015 ERROR %s: ERRORRETRY is too large, using default value (%d).
007017 ERROR %s: MAXSENDEVENTRETRY is not numeric, using default value (%d).
007018 ERROR %s: MAXSENDEVENTRETRY cannot be zero, using default value (%d).
007019 ERROR %s: MAXSENDEVENTRETRY is too large, using default value (%d).
007021 ERROR %s: DAEMONSTACKSIZE is not numeric, using default value (%d).
007022 ERROR %s: DAEMONSTACKSIZE cannot be less than %d, using default value (%d).
007023 ERROR %s: DAEMONSTACKSIZE is too large, using default value (%d).
007025 ERROR %s: FILTERHUNGMSG is not numeric, using default value (%d).
007026 ERROR s: FILTERHUNGMSG is too large, filtering 100 of messages.
007029 ERROR %s: DAEMONKEEPDEVICEOPEN must be `TRUE’ or `FALSE’, using default value (‘%s’).
007031 ERROR %s: DAEMONHALTONCE must be `TRUE’ or `FALSE’, using default value (‘%s’).
007033 ERROR %s: SCSIHALT must be `TRUE’ or `FALSE’, using default value (‘%s’).
007035 ERROR %s: SCSIEVENT must be `TRUE’ or `FALSE’, using default value (‘%s’).
007037 ERROR %s: SCSIERROR must be `halt’ or `event’, using default value (‘%s’).
007039 ERROR %s: RESERVATIONCONFLICT must be `halt’ or `event’, using default value (‘%s’).
007040 FATAL -f option `%s’ is not numeric
007041 FATAL -f option cannot be zero
007042 FATAL -f option `%s’ is too large
007043 FATAL -n option `%s’ is not numeric
007044 FATAL -n option out of range (-20 to 19)
007053 ERROR malloc failed. Assume that it is a monitoring target device.
007058 ERROR %s: %s failed on ‘%s’, result:%d, Sense Key = %d.

Cause: A SCSI device couldn’t be reserved or have its status checked. This may be because the storage is malfunctioning or because the disk has been reserved by another server.

Action: Check adjacent log messages for more details and verify that resources are being handled properly.
007059 ERROR %s: %s failed on ‘%s’, result:%d.

Cause: A SCSI device couldn’t be reserved or have its status checked. This may be because the storage is malfunctioning or because the disk has been reserved by another server.

Action: Check adjacent log messages for more details and verify that resources are being handled properly.
007060 EMERG %s: failure on device ‘%s’. SYSTEM HALTED.

Cause: A SCSI device couldn’t be reserved or have its status checked. This may be because the storage is malfunctioning or because the disk has been reserved by another server. THE SERVER WILL BE REBOOTED/HALTED.

Action: Verify that the storage is functioning properly and, if so, that resources were handled properly and have been put in service on another server.
007064 ERROR %s: sendevent failed for %s: ‘%s’
007066 ERROR %s: sendevent failure on device ‘%s’.
007072 ERROR %s: failed to open SCSI device ‘%s’, initiate recovery. errno=0x%x, retry count=%d.

Cause: The protected SCSI device could not be opened. The device may be failing or may have been removed from the system.

Action: The system will be halted or a failover to the backup node will be initiated. The default action in this case is a failover, but this can be modified with the SCSIERROR tunable.
007073 ERROR %s: failed to open SCSI device ‘%s’, RETRY. errno=%d, retry count=%d.

Cause: The protected SCSI device could not be opened. The device may be failing or may have been removed from the system.

Action: This error is not critical. The operation will be retried in 5 seconds. If the problem persists, the system will perform a halt or resource failover.
007075 ERROR %s: RESERVATION CONFLICT on SCSI device ‘%s’. ret=%d, errno=0x%x, retry count=%d.

Cause: A SCSI device couldn’t be reserved due to a conflict with another server. This may be because the storage is malfunctioning or because the disk has been reserved by another server.

Action: Check adjacent log messages for more details and verify that resources are handled properly.
007076 ERROR %s: DEVICE FAILURE on SCSI device ‘%s’, RETRY. ret=%d, errno=0x%x, retry count=%d.
007077 ERROR %s: DEVICE FAILURE on SCSI device ‘%s’, initiate recovery. ret=%d, errno=0x%x, retry count=%d.

Cause: A SCSI device couldn’t be reserved or have its status checked. This may be because the storage is malfunctioning or because the disk has been reserved by another server.

Action: Check adjacent log messages for more details and verify that resources are handled properly.
007078 ERROR %s: DEVICE FAILURE on SCSI device ‘%s’, RETRY. ret=%d, errno=0x%x, retry count=%d.

Cause: A SCSI device couldn’t be reserved or have its status checked. This may be because the storage is malfunctioning or because the disk has been reserved by another server.

Action: Check adjacent log messages for more details and verify that resources are handled properly.
007091 ERROR %s: device checking thread (id=%d) for device ‘%s’ returned an unexpected error. return %d, errno=%d, hangcount=%d
008504 ERROR LKSCSI_Open: unable to get unique ID for %s
008506 ERROR LKSCSI_Open: RESERVATIONS has invalid setting ‘%s’. Default setting used.
008507 ERROR LKSCSI_Open: valid settings: ‘ioctl’ and ‘none’.
008508 ERROR LKSCSI_Open: valid setting: ‘ioctl’.
008509 ERROR LKSCSI_Open: SUPPORT_PAGES has invalid setting ‘%s’. Default setting used.
008510 ERROR LKSCSI_Open: valid settings: ‘DONT_ASK’ and ‘CHECK_PAGES’.
008511 ERROR LKSCSI_Open: ADD_LUN_TO_DEVICE_ID has invalid setting ‘%s’. Default setting used.
008512 ERROR LKSCSI_Open: valid settings: ‘TRUE’ and ‘FALSE’.
008513 ERROR LKSCSI_Open: FULL_ID_MATCH has invalid setting ‘%s’. Default setting used.
008514 ERROR LKSCSI_Open: valid settings: ‘TRUE’ and ‘FALSE’.
008515 ERROR LKSCSI_Open: ioctlMethod set to ‘SEND_CMD’.
008516 ERROR LKSCSI_Open: ioctlMethod set to ‘SGIO_SD_NODE’.
008517 ERROR LKSCSI_Open: ioctlMethod set to ‘SGIO_SG_NODE’.
008518 ERROR LKSCSI_Open: ioctlMethod set to ‘QUERY_DRIVER’.
008519 ERROR LKSCSI_Open: ioctlMethod set to ‘QUERY_SG’.
008520 ERROR LKSCSI_Open: ioctlMethod has invalid setting ‘%s’. Default setting ‘query’ used.
008521 ERROR LKSCSI_Open: valid settings: ‘SEND_CMD’, ‘SGIO_SD’, ‘SGIO_SG’, and ‘QUERY’.
008524 ERROR LKSCSI_Open: internal error, GetIDLUN on %s failed with %d.
008534 ERROR LKSCSI_Open: unable to map %s to a generic node
008535 ERROR LKSCSI_Open: fcntl: ioctlMethod file lock failed. errno = %d.
008536 ERROR LKSCSI_Open: unlock of ioctlMethod file failed. errno = %d.
008537 ERROR LKSCSI_Open: fcntl: ioctlMethod file lock failed. errno = %d.
008538 ERROR LKSCSI_Open: unlock of ioctlMethod file failed. errno = %d.
008539 ERROR LKSCSI_Open: setIoctlMethod: open failed on %s.
010000 WARN flg_list -d $i took more than $pswait seconds to complete…
010001 ERROR flag $flag not present, switchovers may occur.
010002 WARN flag $flag not present, send message again.

Cause: This message indicates an incomplete process that will be retried.

Action: Check adjacent log messages for repeated errors.
010003 ERROR COMMAND OUTPUT: $LKBIN/ins_remove

Cause: This message is part of the output from an "ins_remove" command.

Action: Check adjacent log messages for more details. This may not be a true error.
010004 EMERG Cannot find the $LKROOT/config/lkstart-hook file. You must install the LifeKeeper Distribution Enabling package before starting $PRODUCT.

Cause: This error may be caused by installing LifeKeeper directly using the rpms, or perhaps by inadvertently removing an rpm from the system.

Action: You should reinstall LifeKeeper using the ‘setup’ script on the installation media.
010005 EMERG $PRODUCT can not be started in init runlevel $init_state
010006 WARN flg_list -d $i took more than $pswait seconds to complete…

Cause: A flag list operation on a server took much longer than expected. There may be a problem communicating with the other server.

Action: Check adjacent log messages for more details.
010007 ERROR flag $flag not present, switchovers may occur.

Cause: One of the servers in the cluster could not be told to disallow failover operations from the current server.

Action: Check adjacent log messages for more details and monitor the cluster for unexpected behavior.
010008 WARN flag $flag not present, send message again.

Cause: A process is incomplete but will be retried.

Action: Check adjacent log messages for more details and for repeated warnings/errors.
010023 FATAL LifeKeeper failed to initialize properly.

Cause: There was a fatal error while attempting to start LifeKeeper.

Action: Check adjacent log messages for more details.
010024 ERROR `printf ‘Resource "%s" already exists.’ $DISK`
010025 ERROR `printf ‘Unable to get a unique tag name on server "%s" for template resource "%s"’ $MACH $DISK`

Cause: A suitable tag during the create process for a storage resource could not be automatically generated.

Action: Check adjacent log messages for more details. Retry the operation if there are no other errors.
010027 ERROR Error creating resource $DISK
010030 ERROR `printf ‘Create resource dependency "%s" to "%s" failed on "%s".’ $DISKTAG $LSRFTAG $MACH`
010031 ERROR `printf ‘Failed to set resource instance state for "%s" on "%s".’ $DISKTAG $MACH`
010033 ERROR perform_action failed $DISKACTION of $DISKTAG on $MACH.
010034 FATAL Unable to start lcm.

Cause: A core component of the software could not be started.

Action: Check adjacent log messages for more details and try to resolve the reported problem.
010035 FATAL Unable to start ttymonlcm.
010036 ERROR
010038 WARN Waiting for LifeKeeper core components to initialize has exceeded 10 seconds. Continuing anyway, check logs for further details.

Cause: Some parts of the software are taking longer than expected to start up.

Action: Perform the steps listed in the message text.
010039 WARN Waiting for LifeKeeper core components to initialize has exceeded 10 seconds. Continuing anyway, check logs for further details.

Cause: Some parts of the software are taking longer than expected to start up.

Action: Perform the steps listed in the message text.
010040 FATAL Unable to start lcd.
010043 ERROR An equivalency for the tag $PARENT_TAG does not exist on server $SERVER
010044 ERROR An equivalency for the tag $CHILD_TAG does not exist on server $SERVER
010046 ERROR The dependency creation failed on server $SERVER:" `cat $TEMP_FILE`

Cause: A dependency relationship could not be created on the given server.

Action: Check the logs for related errors and try to resolve the reported problem
010050 ERROR An equivalency for the tag $PARENT_TAG does not exist on server $SERVER"
010051 ERROR An equivalency for the tag $CHILD_TAG does not exist on server $SERVER
010053 ERROR The dependency deletion failed on server $SERVER:" `cat $TEMP_FILE`
010063 ERROR $REMSH error

Cause: A command to request data to backup from another server failed.

Action: Check the logs for related errors and try to resolve the reported problem.
010064 ERROR Possible Configuration error: More than one LifeKeeper version is installed on this host
010076 FATAL Usage: hry_setpri [-d server] -t (comma separated root tag list) -p priority [-q] hry_setpri [-d server] -t (comma separated root tag list) -l
010077 FATAL Usage: hry_setpri [-d server] -t (comma separated root tag list) -p priority [-q] hry_setpri [-d server] -t (comma separated root tag list) -l
010078 FATAL Usage: hry_setpri [-d server] -t (comma separated root tag list) -p priority [-q] hry_setpri [-d server] -t (comma separated root tag list) -l
010079 FATAL No equivalencies were found for server "%s". Verify that the server name and tag names are correct.
010080 FATAL No equivalencies were found for server "%s". Verify that the server name and tag names are correct.
010082 WARN lkswitchback($MACH): Unable to obtain automatic switchback lock — trying again in ${interval} minutes
010083 WARN COMMAND OUTPUT: $LKROOT/bin/lkswitchback
010085 ERROR lkswitchback($MACH): Automatic switchback of \"$loctag\" failed

Cause: The resource was not switched back over as expected.

Action: Check the logs for related errors and try to resolve the reported problem.
010087 EMERG The uname of the system has been changed, please change it back to its original setting before starting $PRODUCT.
010088 FATAL Internal usage error in call to reorder_priorities.
010089 FATAL Internal usage error in call to reorder_priorities.
010090 ERROR create device instance failure
010091 ERROR Resource instance \"$CDEVTAG\" with id \"$DEV\" already exists on machine \"$MACH\
010092 ERROR create device instance failure
010093 ERROR create device instance failure
010095 ERROR create device instance failure
010096 ERROR create device instance failure
010101 ERROR create device instance failure `cat /tmp/V2$$`
010102 ERROR admin machine not specified

Cause: Invalid parameters were specified for the "getlocks" operation.

Action: Verify the parameters and retry the operation. If this error happens during normal operation, contact Support.
010103 ERROR lock id string not specified
010104 ERROR lock file not specified
010105 ERROR No systems registered with LifeKeeper
010106 ERROR could not get locks since machine $m is dead
010107 WARN Lock for $m is ignored because system is OOS

Cause: A lock was ignored because the system for which the lock was created is not alive.

Action: Check the logs for related errors. This may be a harmless error.
010108 ERROR lock acquisition timeout

Cause: Acquiring a lock tool longer than expected/allowed.

Action: Check the logs for related errors and try to resolve the reported problem.
010109 ERROR could not get admin locks." `cat /tmp/ER$$`

Cause: The software failed to acquire a lock that is required to manage resources.

Action: Check the logs for related errors and try to resolve the reported problem.
010110 ERROR admin machine not specified
010111 ERROR lock file not specified
010112 ERROR lcdrcp failed with error no: $LCDRCPRES

Cause: A file could not be copied to another server.

Action: Check the logs for related errors and try to resolve the reported problem.
010114 ERROR COMMAND OUTPUT: $LKROOT/bin/sendevent
010115 ERROR COMMAND OUTPUT: $LKROOT/bin/sendevent
010116 ERROR unable to set !lkstop flag

Cause: A flag could not be set to indicate that the server is being stopped by user request.

Action: Check the logs for related errors and try to resolve the reported problem.
010121 ERROR Extended logs aborted due to a failure in opening $destination. ($syserrmsg)

Cause: The execution of utility "lkexterrlog" failed when opening the extended log file.

Action: Check the logs for related errors and try to resolve the reported problem.
010129 ERROR Error editing $DEFAULT to $varcmd
010131 ERROR $CMD: Error editing $DEFAULT to $varcmd
010132 ERROR Unable to retrieve reservation id from "%s". Error: "%s". Attempting to regenerate.

Cause: Unable to open the file /opt/LifeKeeper/config/.reservation_id to retrieve the unique id used for SCSI 3 persistent reservations.

Action: None. An attempt will be made to regenerate the ID and update the file.
010133 ERROR No reservation ID exists in "%s". A new ID must be generated by running "%s/bin/genresid -g" on "%s".

Cause: A unique reservation id has not been defined.

Action: Take all resources out of service on this node and then run "/opt/LifeKeeper/bin/genresid -g" to generate a unique reservation id.
010134 ERROR LifeKeeper does not appear to be running. Unable to determine the uniqueness of the reservation ID within the cluster.

Cause: LifeKeeper was not running when an attempt to check the uniqueness of the reservation id was made.

Action: Start LifeKeeper and rerun the uniqueness check via "/opt/LifeKeeper/bin/genresid -v".
010135 ERROR The current reservation ID of "%s" is not unique within the cluster. A new ID must be generated by running "%s/bin/genresid -g" on "%s".

Cause: The reservation id defined for the system is not unique within the cluster and cannot be used.

Action: Take all resources out of service on this node and then run "/opt/LifeKeeper/bin/genresid -g" to generate a unique reservation id.
010136 ERROR Unable to store reservation id in "%s". Error: "%s"

Cause: Unable to open the file /opt/LifeKeeper/config.reservation_id to store the unique id used for SCSI 3 persistent reservations.

Action: Correct the error listed as the reason the open failed and then take all resources out of service on this node and then run "/opt/LifeKeeper/bin/genresid -g" to generate a new unique reservation id.
010137 ERROR Failed to generate a reservation ID that is unique within the cluster.

Cause: The generated reservation id is already defined on another node in the cluster and must be unique within the cluster.

Action: Take all resources out of service on this node and then run "/opt/LifeKeeper/bin/genresid -g" to generate a new unique reservation id.
010138 ERROR $message);
010139 WARN $message);
010140 ERROR $COMMAND_SNMPTRAP returned $exitcode for Trap $oid:$result
010141 ERROR LK_TRAP_MGR is specified in /etc/default/LifeKeeper, but $COMMAND_SNMPTRAP command is not in PATH.
010142 ERROR $COMMAND_EMAIL returned $exitcode:$result
010143 ERROR LK_NOTIFY_ALIAS is specified in /etc/default/LifeKeeper, but $COMMAND_EMAIL command is not in PATH.
010144 ERROR can’t opendir $LICENSE_DIR: $!
010145 ERROR lktest failed
010146 ERROR lkcheck failed
010147 ERROR ins_list failed: exit code = $exit_code
010148 ERROR $msg);
010159 ERROR Maintenance mode disable currently in progress, can’t enable maintenance mode. If this problem persists, consider using the —force option.
010160 ERROR Maintenance mode enable currently in progress, can’t disable maintenance mode. If this problem persists, consider using the —force option.
010161 ERROR $tag is not a valid resource tag on the local machine, aborting. Please check the spelling and try again.
010163 ERROR $cmd script not found or not executable on system $sys.
010165 ERROR An error occurred while running \’$LKROOT/lkadm/subsys/appsuite/sap/bin/$cmd -m=${opt_mode}${tag_cmd}${force_cmd}\’ on system $sys (exit code: $remexec_ret). Please inspect the logs on that system for more information.
010168 WARN Maintenance mode was not fully ${opt_mode}d for at least one resource on system $sys.
010172 ERROR Maintenance mode was not fully ${opt_mode}d for the requested resources on at least one system in the cluster.
010173 ERROR LifeKeeper is not running on system $me. Unable to ${opt_mode} maintenance mode. Aborting.
010179 ERROR Maintenance mode action \’${opt_mode}\’ did not complete successfully for resource $tag on system $me.
010181 ERROR An error occurred while attempting maintenance mode action \’${opt_mode}\’ on system $me for resources: @{local_hier_tags}.
010187 ERROR Resource $tag has not been extended to system $sys.
010200 ERROR scsifree: uuid is NULL
010206 ERROR scsifree: invalid file format, delimiter not found.
010209 ERROR scsifree(%s): ERROR – matched multiple entries.\n
010219 ERROR scsifree(%s): LKSCSI_Open(%s) failed
010222 ERROR scsifree(%s): LKSCSI_Release(%s) unsuccessful

Cause: A SCSI device that appeared to be reserved was not released as expected.

Action: Check the logs for related errors and try to resolve any reported problems. This error may be benign if the system is functioning properly.
010225 ERROR scsiplock(%s): open failed.
010231 ERROR scsiplock(%s): reserve failed.

Cause: A reservation on a SCSI device could not be acquired.

Action: Check the logs for related errors and try to resolve the reported problem.
010236 ERROR scsifree: invalid file format, delimiter not found.
010239 ERROR scsiplock(%s): device %s found does not match uuid %s, expected %s
010240 ERROR scsiplock(%s): uuid %s found does not match device %s, expected %s
010247 ERROR scsiplist: plist is NULL
010250 ERROR Failed to exec command ‘%s’

Cause: The "lklogmsg" tool failed to execute a sub-command {command}.

Action: Check the logs for related errors and try to resolve any reported problems. Verify that the sub-command exists and is a valid command or program. If this message happens during normal operation, contact Support.
010400 ERROR Error: LK_TRAP_MGR is specified in /etc/default/LifeKeeper, but snmptrap command is not in PATH.
010401 EMERG local recovery failure on resource $opts{‘N’}, syncing our log and rebooting…
010402 EMERG local recovery failure on resource $opts{‘N’}, trigger VMware HA…

Cause: When in LifeKeeper Single Server Protection operation, a resource could not be recovered and VMware-HA is about to be triggered to handle the failure (if VMware-HA is enabled).

Action: No action is required. VMware should handle the failure.
010403 ERROR VMware HA trigger failed
010404 ERROR snmptrap returned $err for Trap 131
010405 ERROR COMMAND OUTPUT: cat /tmp/err$$
010406 ERROR snmptrap returned $err for Trap 132
010407 ERROR COMMAND OUTPUT: cat /tmp/err$$
010408 ERROR snmptrap returned $err for Trap 130
010409 ERROR COMMAND OUTPUT: cat /tmp/err$$
010410 ERROR snmptrap returned $err for Trap 121
010411 ERROR COMMAND OUTPUT: cat /tmp/err$$
010412 ERROR snmptrap returned $err for Trap 122
010413 ERROR COMMAND OUTPUT: cat /tmp/err$$

Cause: This is the output from an "snmptrap" command that may have failed.

Action: Check the logs for related errors and try to resolve the reported problem.
010414 ERROR snmptrap returned $err for Trap 111
010415 ERROR COMMAND OUTPUT: cat /tmp/err$$
010416 ERROR snmptrap returned $err for Trap 112
010417 ERROR COMMAND OUTPUT: cat /tmp/err$$
010418 ERROR snmptrap returned $err for Trap 110
010419 ERROR COMMAND OUTPUT: cat /tmp/err$$
010420 EMERG local recovery failure on resource $opts{‘N’}, trigger reboot…

Cause: When in LifeKeeper Single Server Protection operation, a resource could not be recovered and a reboot is about to be triggered to handle the failure.

Action: No action is required.

010421 ERROR snmptrap returned $err for Trap 102
010422 ERROR COMMAND OUTPUT: cat /tmp/err$$
010423 ERROR snmptrap returned $err for Trap 101
010424 ERROR COMMAND OUTPUT: cat /tmp/err$$
010425 ERROR snmptrap returned $err for Trap 100
010426 ERROR COMMAND OUTPUT: cat /tmp/err$$
010427 ERROR snmptrap returned $err for Trap 140
010428 ERROR COMMAND OUTPUT: cat /tmp/err$$
010429 ERROR snmptrap returned $err for Trap 141
010430 ERROR COMMAND OUTPUT: cat /tmp/err$$
010431 ERROR snmptrap returned $err for Trap 120
010432 ERROR COMMAND OUTPUT: cat /tmp/err$$
010433 ERROR LK_NOTIFY_ALIAS is specified in /etc/default/LifeKeeper, but mail command is not in PATH.
010434 ERROR [$SUBJECT event] mail returned $err
010435 ERROR COMMAND OUTPUT: cat /tmp/err$$
010436 ERROR [$SUBJECT event] mail returned $err
010437 ERROR COMMAND OUTPUT: cat /tmp/err$$
010438 ERROR [$SUBJECT event] mail returned $err
010439 ERROR COMMAND OUTPUT: cat /tmp/err$$
010440 ERROR [$SUBJECT event] mail returned $err

Cause: This indicates a notification email could not be sent via the "mail" command.

Action: Check the logs for related errors and try to resolve the reported problem.
010441 ERROR COMMAND OUTPUT: cat /tmp/err$$
010442 ERROR [$SUBJECT event] mail returned $err
010443 ERROR COMMAND OUTPUT: cat /tmp/err$$

Cause: This is the output from a "mail" command that may have failed.

Action: Check the logs for related errors and try to resolve the reported problem.
010444 ERROR [$SUBJECT event] mail returned $err
010445 ERROR COMMAND OUTPUT: cat /tmp/err$$

Cause: This is the output from a "mail" command that may have failed.

Action: Check the logs for related errors and try to resolve the reported problem.
010446 ERROR [$SUBJECT event] mail returned $err
010447 ERROR COMMAND OUTPUT: cat /tmp/err$$
010448 ERROR [$SUBJECT event] mail returned $err
010449 ERROR COMMAND OUTPUT: cat /tmp/err$$
010450 ERROR [$SUBJECT event] mail returned $err
010451 ERROR COMMAND OUTPUT: cat /tmp/err$$
010452 ERROR [$SUBJECT event] mail returned $err
010453 ERROR COMMAND OUTPUT: cat /tmp/err$$
010454 ERROR [$SUBJECT event] mail returned $err
010455 ERROR COMMAND OUTPUT: cat /tmp/err$$
010456 ERROR [$SUBJECT event] mail returned $err
010457 ERROR COMMAND OUTPUT: cat /tmp/err$$
010458 ERROR [$SUBJECT event] mail returned $err
010459 ERROR COMMAND OUTPUT: cat /tmp/err$$
010460 ERROR [$SUBJECT event] mail returned $err
010461 ERROR COMMAND OUTPUT: cat /tmp/err$$
010463 ERROR LifeKeeper: name of machine is not specified, ARGS=$ARGS

Cause: Invalid arguments were specified for the "comm_down" event.

Action: Check your LifeKeeper configuration and retry the operation.
010471 ERROR COMM_DOWN: Attempt to obtain local comm_down lock flag failed

Cause: During the handling of a communication failure with another node, a local lock could not be acquired. This will likely stop a failover from proceeding.

Action: Check the logs for related errors and try to resolve the reported problem. If failovers are not taking place properly, contact Support.
010482 ERROR LifeKeeper: name of machine is not specified, ARGS=$ARGS

Cause: Invalid arguments were specified for the "comm_up" event.

Action: Check your LifeKeeper configuration and retry the operation.
010484 WARN flg_list -d $MACH check timed-out ($delay seconds).

Cause: "flg_list" command reached its timeout value {delay} seconds.
010487 WARN flg_list -d $MACH check timed-out, unintended switchovers may occur.

Cause: "flg_list" command reached its timeout value.

Action: Switch back the resource tree if unintended switchover occurs.
010492 WARN $m

Cause: One of other servers looked dead to this server {server}, but witness servers did not agree.

Action: Ensure other server is dead and switch over the resource manually.
010494 ERROR LifeKeeper: COMM_UP to machine $MACH completed with errors.

Cause: An unexpected failure occurred during "COMM_UP" event.

Action: Check adjacent log messages for more details.
010503 ERROR lcdrecover hung or returned error, attempting kill of process $FPID

Cause: "lcdrecover" took too long or errored out.
010506 ERROR Intelligent Switchback Check Failed

Cause: Failed 5 times to perform "lcdrecover."

Action: Switch over the resource tree manually.
010600 ERROR removing hierarchy remnants
010627 WARN Equivalency Trim: does not have a full complement of equivalencies. Hierarchy will be unextended from
010629 WARN Your hierarchy exists on only one server. Your application has no protection until you extend it to at least one other server.
010712 ERROR Unextend hierarchy failed

Cause: A resource hierarchy failed to be unextended from a server.

Action: Check the logs for related errors and try to resolve the reported problem.
010714 ERROR $ERRMSG Resource \"$aRes\" is currently in-service on machine \"$TARGET_MACH\".
010716 ERROR $ERRMSG Unable to access dependencies of root resource \"$aRoot\" on target machine \"$TARGET_MACH\".
010718 ERROR $ERRMSG Hierarchy \"$ROOT_LIST\" is an invalid multi-root hierarchy. Root \"$aRoot\" has no common dependencies.
010720 ERROR $ERRMSG Hierarchy on target machine has no equivalencies.
010722 ERROR $ERRMSG Unable to obtain machine access information from target machine \"$TARGET_MACH\".
010728 ERROR $ERRMSG – Required input target machine is undefined.
010730 ERROR $ERRMSG – Required input root list is undefined.
010734 ERROR $ERRMSG The unextmgr program could not be run on target machine \"$TARGET_MACH\".
010746 ERROR $ERRMSG Target machine \"$TARGET_MACH\" does not have an active LifeKeeper communication path to machine \"$aMach\" in the hierarchy." >&2

Cause: A hierarchy cannot be unextended because the target server does not have adequate communication with the other servers in the cluster.

Action: Check the logs for related errors and try to resolve the reported problem. Ensure that all servers have communication paths to each other.
010748 ERROR $ERRMSG Unable to establish an Admin Lock Flag.
010754 ERROR $ERRMSG Unable to obtain local equivalencies information.
010756 WARN Warning – unextmgr ($TARGET_MACH, $ROOT_LIST) – Unable to remove equivalence between \"$LocTag\" on machine \"$TARGET_MACH\" and \"$RemTag\" on machine \"$RemSys\". Continuing!
010762 WARN Warning – unextmgr ($TARGET_MACH, $ROOT_LIST) – The unextend operation was not completed successfully.
010763 ERROR lock failed
011000 ERROR appremote: unknown command type %d(‘%c’)\n

Cause: Internal error.

Action: Try restarting the product.
011001 ERROR depremote: unknown command type %d(‘%c’)\n

Cause: Internal error.

Action: Try restarting the product.
011002 ERROR eqvremote: unknown command type %d(‘%c’)\n

Cause: Internal error.

Action: Try restarting the product.
011003 ERROR flgremote: unknown command type %d(‘%c’)\n

Cause: Internal error.

Action: Try restarting the product.
011004 WARN Illegal creation of resource

Cause: This will not occur under normal circumstances.
011009 ERROR insremote: unknown change field command type %d(‘%c’)\n

Cause: Internal error.

Action: Try restarting the product.
011010 ERROR insremote: unknown command type %d(‘%c’)\n

Cause: Internal error.

Action: Try restarting the product.
011011 FATAL %s

Cause: LifeKeeper could not get IPC key.

Action: Check adjacent log messages for more details.
011012 FATAL semget(%s,%c)

Cause: LifeKeeper could not get semaphore set id.

Action: Check adjacent log messages for more details.
011013 FATAL shmget(%s,%c)

Cause: System could not allocate a shared memory segment.

Action: Check adjacent log messages for more details.
011014 FATAL prefix_lkroot("out"));

Cause: A system error has occurred while accessing /opt/LifeKeeper/out.

Action: Determine why /opt/LifeKeeper/out is not accessible.
011015 ERROR DEMO_UPGRADE_MSG);

Cause: You are running a demo license.

Action: Contact Support to obtain a new license.
011016 ERROR lic_single_node_msg);

Cause: You have a license for LifeKeeper Single Server Protection but you do not have LifeKeeper Single Server Protection installed.

Action: Either install LifeKeeper Single Server Protection or obtain a license that matches the product you are running.
011018 ERROR lic_init_fail_msg, lc_errstring(lm_job));

Cause: License manager initialization failed.

Action: Check adjacent log messages for more details.
011020 EMERG lic_init_fail_msg, lc_errstring(lm_job));

Cause: License manager initialization failed.

Action: Check adjacent log messages for more details.
011021 EMERG lic_error_msg, lc_errstring(lm_job));

Cause: There is a problem with your license.

Action: Contact Support to obtain a new license.
011022 EMERG lic_error_msg, lc_errstring(lm_job));

Cause: There is a problem with your license.

Action: Contact Support to obtain a new license.
011023 EMERG lic_no_rest_suite, "");

Cause: There is a problem with your license.

Action: Contact Support to obtain a new license.
011024 EMERG lic_error_msg, lc_errstring(lm_job));

Cause: There is a problem with your license.

Action: Contact Support to obtain a new license.
011025 EMERG lic_no_license, "");

Cause: LifeKeeper could not find valid license keys.

Action: Ensure license keys are valid for the server and retry the operation.
011026 EMERG lic_error_msg, lc_errstring(lm_job));

Cause: There is an unknown problem with your license.

Action: Contact Support to obtain a new license.
011027 EMERG lic_no_license, "");

Cause: There is a problem with your license.

Action: Contact Support to obtain a new license.
011028 ERROR lang_error_msg

Cause: There is a problem with your license.

Action: Contact Support to obtain a new license.
011029 FATAL can’t set reply system

Cause: A message failed to be sent.

Action: Check adjacent log messages for more details. This may be a temporary error.
011030 FATAL can’t set reply mailbox

Cause: A message failed to be sent.

Action: Check adjacent log messages for more details. This may be a temporary error.
011031 ERROR Failure reading output of ‘%s’ on behalf of %s

Cause: A system error has occurred while accessing temporary file /tmp/OUT.{pid}.

Action: Determine why /tmp/OUT.{pid} is not accessible.
011032 ERROR Failure reading output of ‘%s’

Cause: A system error has occurred while accessing temporary file /tmp/ERR.{pid}.

Action: Determine why /tmp/ERR.{pid} is not accessible.
011033 ERROR event \"%s,%s\" already posted for resource with id \"%s\"

Cause: This message is for information only.
011034 ERROR no resource has id of \"%s\"

Cause: LifeKeeper could not find the {id} resource.

Action: Verify the parameters and retry the "sendevent" operation.
011043 ERROR COMMAND OUTPUT: %s
011044 ERROR flagcleanup:fopen(%s)

Cause: A system error has occurred while reading /opt/LifeKeeper/config/flg.

Action: Determine why /opt/LifeKeeper/config/flg is not readable.
011045 ERROR flagcleanup:fopen(%s)

Cause: A system error has occurred while writing /opt/LifeKeeper/config/flg.

Action: Determine why /opt/LifeKeeper/config/flg is not writable.
011046 ERROR flagcleanup:fputs(%s)

Cause: A system error has occurred while writing /opt/LifeKeeper/config/flg.

Action: Determine why /opt/LifeKeeper/config/flg is not writable.
011047 ERROR flagcleanup:rename(%s,%s)

Cause: A system error has occurred while renaming /opt/LifeKeeper/config/.flg to /opt/LifeKeeper/config/flg.

Action: Determine why /opt/LifeKeeper/config/flg was not able to be renamed.
011048 ERROR flagcleanup:chmod(%s)

Cause: A system error has occurred while changing permissions in /opt/LifeKeeper/config/flg.

Action: Determine why LifeKeeper could not change permissions in /opt/LifeKeeper/config/flg.
011049 ERROR License check failed with error code %d

Cause: There is a problem with your license.

Action: Contact Support to obtain a new license.
011051 ERROR lcdinit: clearing Disk Reserve file failed

Cause: A system error has occurred while writing /opt/LifeKeeper/subsys/scsi/resources/disk/disk.reserve.

Action: Determine why /opt/LifeKeeper/subsys/scsi/resources/disk/disk.reserve is not writable.
011052 FATAL malloc() failed

Cause: The system could not allocate memory for LifeKeeper.

Action: Increase the process limit for the data segment.
011053 FATAL lcm_is_unavail);

Cause: A system error has occurred while writing /tmp/LK_IS_UNAVAIL.

Action: Determine why /tmp/LK_IS_UNAVAIL is not writable.
011054 FATAL lk_is_unavail);

Cause: A system error has occurred while writing /opt/LifeKeeper/config/LK_IS_ON.

Action: Determine why /opt/LifeKeeper/config/LK_IS_ON is not writable.
011055 FATAL usr_alarm_config_LK_IS_ON);

Cause: A system error has occurred while writing /tmp/LCM_IS_UNAVAI.

Action: Determine why /tmp/LCM_IS_UNAVAI is not writable.
011056 ERROR License check failed with error code %d

Cause: There is a problem with your license.

Action: Contact Support to obtain a new license.
011057 ERROR lcdremote: unknown command type %d(‘%c’)\n

Cause: A message failed to be received.

Action: Check adjacent log messages for more details. This may be a temporary error, but if this error continues and servers cannot communicate, verify the network configuration on the servers.
011059 FATAL Could not write to: %s

Cause: A system error has occurred while accessing /opt/LifeKeeper/config/LK_START_TIME.

Action: Determine why /opt/LifeKeeper/config/LK_START_TIME is not accessible.
011060 FATAL received NULL message

Cause: A message failed to be received.

Action: Check adjacent log messages for more details. This may be a temporary error, but if this error continues and servers cannot communicate, verify the network configuration on the servers.
011061 ERROR unknown data type %d(‘%c’) on machine \"%s\"\n

Cause: A message failed to be received.

Action: Check adjacent log messages for more details. This may be a temporary error, but if this error continues and servers cannot communicate, verify the network configuration on the servers.
011062 WARN LifeKeeper shutdown in progress. Unable to perform failover recovery processing for %s\n

Cause: LifeKeeper was unable to fail over the given resource during shutdown.

Action: Switch over the resource tree to other server manually.
011063 WARN LifeKeeper resource initialization in progress. Unable to perform failover recovery processing for %s\n

Cause: LifeKeeper was unable to fail over the given resource during start up.

Action: Switch over the resource tree manually after LifeKeeper starts up.
011068 ERROR ERROR on command %s

Cause: An error occurred while running the "rlslocks" command.

Action: Check adjacent messages for more details.
011070 ERROR ERROR on command %s

Cause: An error occurred while running the "getlocks" command.

Action: Check adjacent log messages for more details.

011080 FATAL out of memory

Cause: Internal error.

Action: Increase the process limit for the data segment.
011081 FATAL Failed to ask ksh to run: %s

Cause: A system error has occurred while invoking ksh.

Action: Make sure the pdksh (v8.0 and earlier) or the steeleye-pdksh (v81 and later) package is installed.
011082 ERROR Failed to remove: %s

Cause: A system error has occurred while removing /tmp/LCM_IS_UNAVAIL.

Action: Determine why /tmp/LCM_IS_UNAVAIL is not removable.
011083 ERROR Failed to remove: %s

Cause: A system error has occurred while trying to unlink /tmp/LK_IS_UNAVAIL.

Action: Determine why /tmp/LK_IS_UNAVAIL is not removable.
011084 FATAL Failed to generate an IPC key based on: %s

Cause: A system error has occurred while accessing /opt/LifeKeeper.

Action: Determine why /opt/LifeKeeper is not accessible.
011085 ERROR semget(%s,%c) failed

Cause: A system error has occurred while removing a semaphore.

Action: Try to remove the semaphore manually.
011086 ERROR shmget(%s,%c) failed

Cause: A system error has occurred while removing a shared memory segment.

Action: Try to remove the shared memory segment manually.
011087 ERROR semctl(IPC_RMID) failed

Cause: A system error has occurred while removing a semaphore.

Action: Try to remove the semaphore manually.
011088 ERROR shmctl(IPC_RMID) failed

Cause: A system error has occurred while removing a shared memory segment.

Action: Try to remove the shared memory segment manually.
011089 FATAL Execution of lcdstatus on remote system <%s> failed\n

Cause: The remote {node} is down, inaccessible via the network or some other system problem occurred on the remote node.

Action: Bring the remote node back online, or check adjacent messages for additional information, or check the logs on the remote node for additional information.
011090 FATAL

Cause: Internal error.

Action: Perform the steps listed in the message text.
011091 WARN

Cause: This will not occur under normal circumstances.
011092 FATAL

Cause: There is a problem with your license.

Action: Perform the steps listed in the message text.
011093 FATAL

Cause: There is a problem with your license.

Action: Perform the steps listed in the message text.
011094 FATAL

Cause: There is a problem with your license.

Action: Perform the steps listed in the message text.
011095 FATAL

Cause: There is a problem with your license.

Action: Perform the steps listed in the message text.
011096 FATAL

Cause: There is a problem with your license.

Action: Perform the steps listed in the message text.
011097 FATAL

Cause: There is a problem with your license.

Action: Contact Support to obtain a new license.
011098 FATAL

Cause: There is a problem with your license.

Action: Contact Support to obtain a new license.
011099 FATAL

Cause: There is a problem with your license.

Action: Contact Support to obtain a new license.
011100 FATAL

Cause: There is a problem with your license.

Action: Contact Support to obtain a new license.
011101 FATAL

Cause: There is a problem with your license.

Action: Contact Support to obtain a new license.
011102 FATAL

Cause: There is a problem with your license.

Action: Contact Support to obtain a new license.
011103 FATAL

Cause: There is a problem with your license.

Action: Contact Support to obtain a new license.
011104 FATAL

Cause: There is a problem with your license.

Action: Contact Support to obtain a new license.
011105 FATAL

Cause: There is a problem with your license.

Action: Perform the steps listed in the message text.
011111 ERROR action \"%s\" on resource with tag \"%s\" has failed

Cause: The {action} for resource {tag} has failed.

Action: See adjacent error messages for further details.
011112 ERROR

Cause: LifeKeeper could not find the network device.

Action: Check your LifeKeeper configuration.
011113 ERROR netremote: unknown subcommand type %d(‘%c’)\n

Cause: Internal error.

Action: Try restarting the product.
011114 ERROR netremote: unknown command type %d(‘%c’)\n

Cause: Internal error.

Action: Try restarting the product.
011117 ERROR sysremote: system \"%s\" not found on \"%s\"

Cause: An invalid system name was provided.

Action: Recheck the system name and rerun the command.
011118 ERROR sysremote: unknown subcommand type %d(‘%c’)\n

Cause: Internal error.

Action: Try restarting the product.
011119 ERROR sysremote: unknown command type %d(‘%c’)\n

Cause: Internal error.

Action: Try restarting the product.
011120 ERROR typremote: unknown command type %d(‘%c’)\n

Cause: Internal error.

Action: Try restarting the product.
011129 ERROR Failure during run of ‘%s’ on behalf of %s

Cause: Command execution failed.

Action: See message details to determine the problem.
011130 ERROR %s

Cause: The command {command} produced unexpected output.

Action: Action should be determined by the content of adjacent error messages.
011131 EMERG demo_update_msg);

Cause: There is a problem with your demo license.

Action: Contact Support to obtain a new license.
011132 EMERG demo_tamper_msg);

Cause: You have a demo license and clock tampering has been detected.

Action: Contact Support to obtain a new license.
011133 EMERG demo_tamper_msg);

Cause: You have a demo license and clock tampering has been detected.

Action: Contact Support to obtain a new license.
011134 EMERG demo_expire_msg);

Cause: The demo license for this product has expired.

Action: Contact Support to obtain a new license.
011135 EMERG demo_tamper_msg);

Cause: You have a demo license and clock tampering has been detected.

Action: Contact Support to obtain a new license.
011136 EMERG buf);

Cause: You are running a demo license.

Action: Contact Support to obtain a new license.
011138 EMERG buf);

Cause: You are running a demo license.

Action: Contact Support to obtain a new license.
011142 WARN LifeKeeper Recovery Kit %s license key NOT FOUND

Cause: An Application Recovery Kit license for {kit} was not found.

Action: Contact Support to obtain a new license.
011150 ERROR COMMAND OUTPUT: %s

Cause: The command "eventslcm" produced unexpected output.

Action: Check the logs for related errors and try to resolve the reported problem.

011151 EMERG &localebuf3);

Cause: This version of the LifeKeeper core package is restricted to being used within the territories of the People’s Republic of China or Japan.
011152 EMERG Localized license failure

Cause: There was a mis-match between your locale and the locale for which the product license was created.

Action: Contact Support to obtain a new license which matches your locale.
011154 EMERG Single Node flag check failed.

Cause: You have a license for LifeKeeper Single Server Protection but you do not have LifeKeeper Single Server Protection installed.

Action: Either install LifeKeeper Single Server Protection or obtain a license that matches the product you are running.
011155 EMERG lic_master_exp_msg, "");

Cause: Your license key for this product has expired.

Action: Contact Support to obtain a new license.
011162 EMERG lic_restricted_exp_msg, "");

Cause: Your license key for this product has expired.

Action: Contact Support to obtain a new license.
011163 EMERG Single Node license check failed

Cause: You have a license for LifeKeeper Single Server Protection but you do not have LifeKeeper Single Server Protection installed.

Action: Either install LifeKeeper Single Server Protection or obtain a license that matches the product you are running.
011164 EMERG demo_expire_msg, DEMO_UPGRADE_MSG);

Cause: Your license key for this product has expired.

Action: Please contact Support to obtain a permanent license key for your product.
011165 ERROR LifeKeeper initialize timed out in tag \"%s\"
015000 ERROR COMMAND OUTPUT: /opt/LifeKeeper/sbin/chpst

Cause: An error has ocurred with the "steeleye-lighttpd" process. Specific details of the error are included in the actual log message.

Action: Correct the configration and "steeleye-lighttpd" will automatically be restarted.

103001 ERROR LifeKeeper has detected an error while trying to determine the node number(s) of the DB partition server(s) for the instance

Cause: The db2nodes.cfg does not contain any server names.

Action: Ensure the db2nodes.cfg is valid.
103002 ERROR LifeKeeper was unable to get the version for the requested instance "%s"

Cause: "db2level" command did not return DB2 version.

Action: Check your DB2 configuration.
103003 ERROR LifeKeeper has detected an error while trying to determine the node number(s) of the DB partition server(s) for the instance

Cause: The DB2 Application Recovery Kit was unable to find any nodes for the DB2 instance.

Action: Check your DB2 configuration.
103004 ERROR Unable to get the information for resource "%s"

Cause: Failed to get resource information.

Action: Check your LifeKeeper configuration.
103005 ERROR Unable to get the information for resource "%s"

Cause: Failed to get resource information.

Action: Check your LifeKeeper configuration.
103006 ERROR Unable to get the instance information for resource "%s"

Cause: Failed to get the instance information.

Action: Check your LifeKeeper configuration.
103007 ERROR Unable to get the instance home directory information for resource "%s"

Cause: Failed to get the instance home directory path.

Action: Check your LifeKeeper configuration.
103008 ERROR Unable to get the instance type information for resource "%s"

Cause: The DB2 Application Recovery Kit found invalid instance type.

Action: Check your LifeKeeper configuration.
103009 ERROR LifeKeeper has encountered an error while trying to get the database configuration parameters for database \"$DB\"

Cause: There was an unexpected error running "db2 get db cfg for $DB" command.

Action: Check the logs for related errors and try to resolve the reported problem.
103012 ERROR LifeKeeper was unable to start the database server for instance "%s"

Cause: The requested startup of the DB2 instance failed.

Action: Check the logs for related errors and try to resolve the reported problem. Correct any reported errors before retrying the "restore" operation.
103013 ERROR LifeKeeper was unable to start the database server for instance "%s"

Cause: The requested startup of the DB2 instance failed.

Action: Check the logs for related errors and try to resolve the reported problem. Correct any reported errors before retrying the "restore" operation.
103015 ERROR An entry for the home directory "%s" of instance "%s" does not exist in "/etc/fstab"

Cause: The home directory of instance of Multiple Partition database should exist in "/etc/fstab".

Action: Ensure the home directory exists in "/etc/fstab".
103016 ERROR LifeKeeper was unable to mount the home directory for the DB2 instance "%s"

Cause: Failed to mount the home directory of instance of Multiple Partition database.

Action: Ensure the home directory is mounted and retry the operation.
103017 ERROR Unable to get the instance nodes information for resource "%s"

Cause: Failed to get the instance nodes.

Action: Check your LifeKeeper configuration.
103018 ERROR LifeKeeper was unable to start database partition server "%s" for instance "%s"

Cause: The requested startup of the DB2 instance failed.

Action: Check the logs for related errors and try to resolve the reported problem. Correct any reported errors before retrying the "restore" operation.
103020 ERROR LifeKeeper was unable to stop the database server for instance "%s"

Cause: The requested shutdown of the DB2 instance failed.

Action: Check the logs for related errors and try to resolve the reported problem. Correct any reported errors before retrying the "remove" operation.
103021 ERROR LifeKeeper was unable to stop the database server for instance "%s"

Cause: The requested shutdown of the DB2 instance failed.

Action: Check the logs for related errors and try to resolve the reported problem. Correct any reported errors before retrying the "remove" operation.
103023 ERROR Unable to get the instance nodes information for resource "%s"

Cause: Failed to get the instance nodes.

Action: Check your LifeKeeper configuration.
103024 ERROR LifeKeeper was unable to stop database partition server "%s" for instance "%s"

Cause: The requested shutdown of the DB2 instance failed.

Action: Check the logs for related errors and try to resolve the reported problem. Correct any reported errors before retrying the "remove" operation.
103026 ERROR Unable to get the instance nodes information for resource "%s"

Cause: Failed to get the instance nodes.

Action: Check your LifeKeeper configuration.
103027 FATAL The argument for the DB2 instance is empty

Cause: Invalid parameters were specified for the create operation.

Action: Verify the parameters and retry the operation.
103028 FATAL Unable to determine the DB2 instance home directory

Cause: The DB2 Application Recovery Kit was unable to determine the DB2 instance home directory.

Action: Ensure the instance owner name is same as the instance name and retry the operation.
103029 FATAL Unable to determine the DB2 instance type

Cause: The DB2 Application Recovery Kit was unable to determine the DB2 instance type.

Action: Check your DB2 configuration.
103030 FATAL LifeKeeper has detected an error while trying to determine the node number(s) of the DB partition server(s) for the instance

Cause: The DB2 Application Recovery Kit was unable to find any nodes for the DB2 instance.

Action: Check your DB2 configuration.
103031 ERROR The path "%s" is not on a shared filesystem

Cause: The instance home directory should be on a shared filesystem.

Action: Ensure the path is on shared filesystem and retry the create operation.
103032 ERROR LifeKeeper was unable to get the DB tablespace containers for instance "%s" or the log path for one of its databases

Cause: LifeKeeper could not determine the location of the database table space containers or verify that they are located in a path which is on a mounted filesystem.

Action: Check the logs for related errors and try to resolve the reported problem. Correct any reported errors before retrying the "create" operation.
103033 ERROR The path "%s" is not on a shared filesystem

Cause: The path of database table space container should be on a shared filesystem.

Action: Ensure database table space container is on a shared filesystem and retry the operation.
103034 ERROR A DB2 Hierarchy already exists for instance "%s"

Cause: An attempt was made to protect the DB2 instance that is already under LifeKeeper protection.

Action: You must select a different DB2 instance for LifeKeeper protection.
103035 ERROR The file system resource "%s" is not in-service

Cause: The file system which the DB2 resource depends on should be in service.

Action: Ensure the file system resource is in service and retry the "create" operation.
103036 ERROR Unable to create the hierarchy for raw device "%s"

Cause: LifeKeeper was unable to create the resource {raw device} .

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the "create" operation.
103037 ERROR A RAW hierarchy does not exist for the tag "%s"

Cause: LifeKeeper was unable to find the raw resource {tag} .

Action: Check your LifeKeeper configuration.
103038 ERROR LifeKeeper was unable to create a dependency between the DB2 hierarchy "%s" and the Raw hierarchy "%s"

Cause: The requested dependency creation between the parent DB2 resource and the child Raw resource failed.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors before retrying the "create" operation.
103039 ERROR LifeKeeper could not disable the automatic startup feature of DB2 instance "%s"

Cause: An unexpected error occurred while attempting to update the DB2 setting.

Action: The DB2AUTOSTART will need to be updated manually to turn off the automatic startup of the instance at system boot.
103040 ERROR DB2 version "%s" is not installed on server "%s"

Cause: LifeKeeper could not find DB2 installed location.

Action: Check your DB2 configuration.
103041 ERROR The instance owner "%s" does not exist on target server "%s"

Cause: An attempt to retrieve the DB2 instance owner from template server during a "canextend" or "extend" operation failed.

Action: Verify the DB2 instance owner exists on the specified server. If the user does not exist, it should be created with the same uid and gid on all servers in the cluster.
103042 ERROR The instance owner "%s" uids are different on target server "%s" and template server "%s"

Cause: The user id on the target server {target server} for the DB2 instance owner {user} does not match the value of the user {user} on the template server {template server}.

Action: The user ids for the DB2 instance owner {user} must match on all servers in the cluster. The user id mismatch should be corrected manually on all servers before retrying the "canextend" operation.

103043 ERROR The instance owner "%s" gids are different on target server "%s" and template server "%s"

Cause: The group id on the target server {target server} for the DB2 instance owner {user} does not match the value of the user {user} on the template server {template server}.

Action: The group ids for the DB2 instance owner {user} must match on all servers in the cluster. The group id mismatch should be corrected manually on all servers before retrying the "canextend" operation.
103044 ERROR The instance owner "%s" home directories are different on target server "%s" and template server "%s"

Cause: The home directory location of the user {user} on the target server {target server} does not match the DB2 instance owner’s home directory on the template server {template server}.

Action: The home directory location of the DB2 instance owner {user} must match on all servers in the cluster. The location mismatch should be corrected manually on all servers before retrying the "canextend" operation.
103045 ERROR LifeKeeper was unable to get the DB2 "SVCENAME" parameter for the DB2 instance

Cause: There was an unexpected error running "db2 get dbm cfg" command.

Action: Check your DB2 configuration.
103046 ERROR Unable to get the value of the DB2 "SVCENAME" parameter for the DB2 instance %s.

Cause: The DB2 "SVCENAME" parameter is set to null.

Action: Check your DB2 configuration.
103047 ERROR LifeKeeper was unable to get the contents of the "/etc/services" file on the server "%s"

Cause: "/etc/services" on the template server does not contain the service names for the DB2 instance.

Action: The service names in "/etc/services" for the DB2 instance must match on all servers in the cluster. The service names mismatch should be corrected manually on all servers before retrying the "canextend" operation.
103048 ERROR LifeKeeper was unable to get the contents of the "/etc/services" file on the server "%s"

Cause: "/etc/services" on the target server does not contain the service names for the DB2 instance.

Action: The service names in "/etc/services" for the DB2 instance must match on all servers in the cluster. The service names mismatch should be corrected manually on all servers before retrying the "canextend" operation.
103049 ERROR The "/etc/services" entries for the instance "%s" are different on target server "%s" and template server "%s"

Cause: The "/etc/services" entries for the instance are mismatched.

Action: The service names in "/etc/services" for the DB2 instance must match on all servers in the cluster. The service names mismatch should be corrected manually on all servers before retrying the "canextend" operation.
103050 ERROR The home directory "%s" for instance "%s" is not mounted on server "%s"

Cause: LifeKeeper could not find db2nodes.cfg for Multiple Partition instance.

Action: Ensure the home directory is mounted and retry the operation.
103051 ERROR Error getting resource information for resource "%s" on server "%s"

Cause: Failed to get resource information from the template server.

Action: Check your LifeKeeper configuration.
103052 ERROR LifeKeeper was unable to add instance "%s" and/or its variables to the DB2 registry

Cause: There was an unexpected error running "db2iset" command.

Action: Check the logs for related errors and try to resolve the reported problem.
103053 ERROR Usage: %s instance
103054 ERROR Unable to determine the DB2 instance type

Cause: The DB2 Application Recovery Kit was unable to determine the DB2 instance type.

Action: Check your DB2 configuration.
103055 ERROR LifeKeeper has detected an error while trying to determine the node number(s) of the DB partition server(s) for the instance

Cause: The DB2 Application Recovery Kit was unable to find any nodes for the DB2 instance.

Action: Check your DB2 configuration.
103056 ERROR Usage: %s instance
103058 ERROR Usage: %s instance
103059 ERROR Usage: %s instance
103060 ERROR Unable to determine the DB2 instance home directory

Cause: The DB2 Application Recovery Kit was unable to determine the DB2 instance home directory.

Action: Ensure the instance owner name is same as the instance name and retry the operation.
103061 ERROR Unable to determine the DB2 instance type

Cause: The DB2 Application Recovery Kit was unable to determine the DB2 instance type.

Action: Check your DB2 configuration.
103062 ERROR LifeKeeper has detected an error while trying to determine the node number(s) of the DB partition server(s) for the instance

Cause: The DB2 Application Recovery Kit was unable to find the node for the DB2 instance.

Action: Check your DB2 configuration.
103063 ERROR Unable to determine the DB2 install path

Cause: The DB2 Application Recovery Kit was unable to find DB2 for the instance.

Action: Check your DB2 configuration.
103064 ERROR Usage: nodes -t tag -a add_nodenum | nodes -t tag -d delete_nodenum | nodes -t tag -p
103065 ERROR Invalid input provided for "%s" utility operation, characters are not allowed.

Cause: Invalid parameters were specified for the "nodes" command.

Action: Verify the parameters and retry the operation.
103066 ERROR Unable to get the information for resource "%s"

Cause: LifeKeeper was unable to find the resource {tag}.

Action: Verify the parameters and retry the operation.
103067 ERROR The DB2 instance "%s" is not a EEE or Multiple Partition instance

Cause: The resource {tag} is single partition instance.

Action: Verify the parameters and retry the operation.
103069 ERROR Node "%s" is already protected by this hierarchy

Cause: Invalid parameters were specified for the "nodes" command.

Action: Verify the parameters and retry the operation.
103070 ERROR Node number "%s" is the last remaining node protected by resource "%s". Deleting all nodes is not allowed.

Cause: Invalid parameters were specified for the "nodes" command.

Action: Verify the parameters and retry the operation.
103071 ERROR LifeKeeper is unable to get the equivalent instance for resource "%s"

Cause: There was an unexpected error running "nodes" command.

Action: Check the logs for related errors and try to resolve the reported problem.
103072 ERROR Unable to set NodesInfo for resource "%s" on "%s"

Cause: There was an unexpected error running "nodes" command.

Action: Check the logs for related errors and try to resolve the reported problem.
103073 ERROR Unable to set NodesInfo for resource "%s" on "%s"

Cause: There was an unexpected error running "nodes" command.

Action: Check the logs for related errors and try to resolve the reported problem.
103074 ERROR Usage: %s instance
103075 ERROR Usage: %s instance
103076 ERROR Unable to determine the DB2 instance type

Cause: The DB2 Application Recovery Kit was unable to determine the DB2 instance type.

Action: Check your DB2 configuration.
103077 ERROR Unable to determine the DB2 instance home directory

Cause: The DB2 Application Recovery Kit was unable to determine the DB2 instance home directory.

Action: Ensure the instance owner name is same as the instance name and retry the operation.
103078 ERROR The database server is not running for instance "%s"

Cause: A process check for the DB2 instance did not find any processes running.

Action: The DB2 instance must be started.
103079 ERROR LifeKeeper has detected an error while trying to determine the node number(s) of the DB partition server(s) for the instance

Cause: The DB2 Application Recovery Kit was unable to find any nodes for the DB2 instance.

Action: Check your DB2 configuration.
103080 ERROR One or more of the database partition servers for instance "%s" is down

Cause: All database partition servers should be running.

Action: Ensure all database partition servers are running and retry the operation.
103081 ERROR DB2 local recovery detected another recovery process in progress for "%s" and will exit.
103082 ERROR Failed to create flag "%s"

Cause: An unexpected error occurred attempting to create a flag for controlling DB2 local recovery processing.

Action: Check the adjacent log messages for further details and related messages. Correct any reported errors.
103083 ERROR Failed to remove flag "%s"

Cause: An unexpected error occurred attempting to remove a flag for controlling DB2 local recovery processing.

Action: Check the adjacent log messages for further details and related messages. Correct any reported errors.
103084 ERROR Unable to determine the DB2 instance \"$Instance\" home directory

Cause: The DB2 Application Recovery Kit was unable to determine the DB2 instance home directory.

Action: Ensure the instance owner name is same as the instance name and retry the operation.
104002 FATAL $msg);

Cause: This message indicates an internal software error.

Action: The stack trace indicates the source of the error.
104003 FATAL $self->Val(‘Tag’) . " is not an SDR resource");

Cause: A data replication action was attempted on a non data replication resource.

Action: Check the logs for related errors and try to resolve the reported problem.
104010 ERROR $self->{‘md’}: bitmap merge failed, $action

Cause: The bitmap merge operation has failed.

Action: The target server may have the mirror and/or protected filesystem mounted, or the bitmap file may be missing on the target. Check the target server.
104022 ERROR $argv1: mdadm failed ($ret)

Cause: The "mdadm" command has failed to add a device into the mirror.

Action: This is usually a temporary condition.
104023 ERROR $_);

Cause: The message contains the output of the "mdadm" command.
104025 ERROR failed to spawn monitor

Cause: The system failed to start the ‘mdadm -F’ monitor process. This should not happen under normal circumstances.

Action: Reboot the system to ensure that any potential conflicts are resolved.
104026 ERROR cannot create $md

Cause: The mirror device could not be created.

Action: Ensure the device is not already in use and that all other parameters for the mirror creation are correct.
104027 ERROR $_);

Cause: This message contains the "mdadm" command output.
104035 ERROR Too many failures. Aborting resync of $md

Cause: The device was busy for an abnormally long period of time.

Action: Reboot the system to be sure that the device is no longer busy.
104036 ERROR Failed to start nbd-server on $target (error $port)

Cause: The nbd-server process could not be started on the target server.

Action: Ensure that the target disk device is available and that its Device ID has not changed.
104037 ERROR Failed to start compression (error $port)

Cause: The system was unable to start the ‘balance’ tunnel process or there was a network problem.

Action: Ensure that the network is operating properly and that TCP ports in the range 10000-10512 are opened and unused. Ensure that the software is installed properly on all systems.
104038 ERROR Failed to start nbd-client on $source (error $ret)

Cause: The nbd-client process has failed to start on the source server.

Action: Look up the reported errno value and try to resolve the problem reported. For example, an errno value of 110 means "Connection timed out", which may indicate a network or firewall problem.
104039 ERROR Failed to add $nbd to $md on $source

Cause: This is usually a temporary condition.

Action: If this error persists, reboot the system to resolve any potential conflicts.
104045 ERROR failed to stop $self->{‘md’}

Cause: The mirror device could not be stopped.

Action: Ensure that the device is not busy or mounted. Try running "mdadm —stop" manually to stop the device.
104048 WARN failed to kill $proc, pid $pid

Cause: The process could not be signalled. This may indicate that the process has already died.

Action: Ensure that the process in question is no longer running. If it is, then reboot the system to clear up the unkillable process.
104050 ERROR Setting $name on $dest failed: $ret. Please try again.

Cause: The system failed to set a ‘mirrorinfo’ file setting.

Action: Check the network and systems and retry the mirror setting operation.
104051 FATAL Unable to open file "%s"

Cause: Failed to open /etc/mtab.

Action: Check that /etc/mtab exists and check the system log for errors.
104052 FATAL Specified existing mount point "%s" is not mounted

Cause: The mount point became unmounted.

Action: Ensure that the mount point is mounted and retry the operation.
104055 ERROR Failed to set up temporary $type access to data for $self->{‘tag’}. Error: $ret

Cause: The filesystem or device was not available on the target server. The mirrored data will not be available on the target server until the mirror is paused and resumed again.

Action: Reboot the target server to resolve any potential conflicts.
104057 ERROR Failed to undo temporary access for $self->{‘tag’} on $self->{‘sys’}. Error: $ret. Please verify that $fsid is not mounted on server $self->{‘sys’}.

Cause: The filesystem could not be unmounted on the target server.

Action: Ensure that the filesystem and device are not busy on the target server. Reboot the target server to resolve any potential conflicts.
104062 FATAL Cannot find a device with unique ID "%s"

Cause: The target disk could not be identified.

Action: Ensure that the appropriate storage recovery kits are installed on the target server. Ensure that the Device ID of the target disk has not changed.
104066 FATAL Cannot get the hardware ID of device "%s"

Cause: A unique ID could not be found for the target disk device.

Action: Ensure that the appropriate storage recovery kits are installed on the target server. Ensure that the Device ID of the target disk has not changed.
104067 FATAL Asynchronous writes cannot be enabled without a bitmap file

Cause: An attempt was made to create a mirror with invalid parameters.

Action: A bitmap file parameter must be specified or synchronous writes must be specified.
104068 FATAL Failed to extend dependent resource %s to system %s. Error %s

Cause: The hierarchy extend operation failed.

Action: Check the logs for related errors and try to resolve the reported problem.
104069 FATAL Failed to grow array ($ret)

Cause: During an extend the template server where the mirror was in-service was unable to grow the array to add the new target.

Action: Check for errors in the LifeKeeper log and system log.
104070 FATAL Unable to extend the mirror "%s" to system "%s"

Cause: The hierarchy extend operation failed.

Action: Check the logs for related errors and try to resolve the reported problem.
104071 ERROR Failed to restore target device resources on $target->{‘sys’} : $err

Cause: The in-service operation has failed on the target server.

Action: Check the logs for related errors and try to resolve the reported problem.
104074 FATAL Cannot get the hardware ID of device "%s"

Cause: There is no storage recovery kit that recognizes the underlying disk device that you are attempting to use for the mirror.

Action: Make sure the appropriate storage recovery kits are installed. If necessary, place your device name in the /opt/LifeKeeper/subsys/scsi/resources/DEVNAME/device_pattern file.
104081 FATAL Cannot make the %s filesystem on "%s" (%d)

Cause: The "mkfs" command failed.

Action: Ensure that the disk device is writable and free of errors and that the filesystem tools for the selected filesystem are installed.
104082 FATAL %s

Cause: This message contains the output of the "mkfs" command.
104083 FATAL Cannot create filesys hierarchy "%s"

Cause: The resource creation failed.

Action: Check the logs for related errors and try to resolve the reported problem.
104086 ERROR The "%s_data_corrupt" flag is set in "%s/subsys/scsi/resources/netraid/" on system "%s". To avoid data corruption, LifeKeeper will not restore the resource.

Cause: The data corrupt flag file has been set as a precaution to prevent accidental data corruption. The mirror cannot be restored on this server until the file is removed.

Action: If you are sure that the data is valid on the server in question, you can either: 1) remove the file and restore the mirror, or 2) force the mirror online using the LifeKeeper GUI or ‘mirror_action force’ command.
104087 ERROR The mirror "%s" (resource: "%s") is not in sync between systems "%s" (source) and "%s" (target) (status: %s). You will not be able to failover the resource to the target system listed above. You will have to bring the resource in-service on another system first and a resync will occur to ensure data reliability

Cause: When the mirror was being taken out of service it was not in-sync. Since there is data on the source that is not on the target(s), DataKeeper will prevent the mirror from coming in-service on any node other than the last node (previous source) that had the mirror in-service.

Action: Bring the mirror in-service on the previous source and let the mirror synchronize.
104088 ERROR Unextending resource "%s" while the mirror "%s" is out of sync. The data on the target partition may be corrupted

Cause: The data_corrupt flag file on the target indicates the data on the target is not synchronized with the source.

Action: Verify the data on the target is valid before using it.
104089 ERROR Deleting resource "%s" while target "%s" is out of sync. The data on the target partition may be corrupted

Cause: The data_corrupt flag file on the target indicates the data on the target is not synchronized with the source.

Action: Verify the data on the target is valid before using it.
104091 ERROR Another nbd-client process is running for nbd%s (pid %s). This process will be terminated.

Cause: When adding a target to a mirror the nbd-client process was already running. The unexpected process will be terminated and a new process started.

Action: None
104092 ERROR Mirror target resource movement to system %s : status %s

Cause: The hierarchy switchover operation has failed.

Action: Check the logs for related errors and try to resolve the reported problem.
104094 ERROR Unable to start the resynchronization to system "%s" for mirror "%s" (resource: "%s"). Please check /proc/mdstat, the system logs, and LifeKeeper logs for error messages

Cause: DataKeeper was unable to establish connection to the target listed.

Action: Check /proc/mdstat, the system logs, and LifeKeeper logs for error messages.
104097 ERROR Unable to stop/remove the mirror "%s" (resource: "%s") on system "%s". You can use the "mdadm —stop" command to manually stop the mirror

Cause: The mirror failed to stop.

Action: Check the system logs and LifeKeeper logs for error messages. Use fuser(1) to find processes that may be using the device and check that no file system is mounted on the mirror. To manually stop the mirror run mdadm —stop /dev/md<#> where <#> is the mirror in the error message.
104099 ERROR Unable to unextend the mirror for resource "%s" from system "%s"

Cause: The hierarchy unextend operation failed.

Action: Reboot the target server to resolve any potential conflicts and retry the operation.
104101 ERROR Failed to set the resynchronization speed limit in %s.

Cause: DataKeeper was unable to update the speed limit in the /proc filesystem.

Action: Check that the /proc entry listed in the message exists and check the system log for errors.
104102 ERROR Failed to set the resynchronization speed limit in %s.

Cause: DataKeeper was unable to update the speed limit in the /proc filesystem.

Action: Check that the /proc entry listed in the message exists and check the system log for errors.
104105 ERROR Internal error in DR scripts has sent the wrong flag into SetBitmap. This is a non-fatal internal error. Please report immediately to support@us.sios.com enclosing copies of the LifeKeeper log.

Cause: The only flags allowed to SetBitmap are dirty and clean. These are internal settings that should always be correct.

Action: Report this error to SIOS support.
104106 ERROR remote ‘bitmap -m’ command failed on $target->{‘sys’}: $ranges

Cause: The bitmap merge command failed on the target server. This may be caused by one of two things: 1) The bitmap file may be missing or corrupted, or 2) the mirror (md) device may be active on the target.

Action: Make sure that the mirror and protected filesystem are not active on the target. If the target’s bitmap file is missing, pause and resume the mirror to recreate the bitmap file.
104107 ERROR Asynchronous writes cannot be enabled without a bitmap file

Cause: Invalid parameters were specified for the mirror create operation.
104108 ERROR Local Partition not available

Cause: Invalid parameters were specified for the mirror create operation.
104109 ERROR Cannot get the hardware ID of device "%s"

Cause: A unique ID could not be determined for the disk device.

Action: Ensure that the appropriate storage recovery kits are installed on the server. Ensure that the Device ID of the disk has not changed.
104110 ERROR Unable to create the mirror "%s" on system "%s"

Cause: The mirror was unable to be built during the resource creation process.

Action: Check system logs and LifeKeeper logs.
104111 FATAL Insufficient input parameters for "%s" creation

Cause: Invalid parameters were specified for the mirror create operation.
104112 FATAL Insufficient input parameters for "%s" creation

Cause: Invalid parameters were specified for the mirror create operation.
104113 FATAL Insufficient input parameters for "%s" creation

Cause: Invalid parameters were specified for the mirror create operation.
104114 FATAL Insufficient input parameters for "%s" creation

Cause: Invalid parameters were specified for the mirror create operation.
104115 FATAL Insufficient input parameters for "%s" creation

Cause: Invalid parameters were specified for the mirror create operation.
104116 FATAL The requested filesystem type "%s" is not supported by LifeKeeper LifeKeeper supported filesystem types are listed under "\$LKROOT/lkadm/subsys/gen/filesys/supported_fs"

Cause: The file system type selected is not supported by this version of LifeKeeper.

Action: Select a file system from the list of supported file systems.
104117 FATAL Insufficient input parameters for "%s" creation

Cause: Invalid parameters were specified for the mirror create operation.
104118 FATAL Cannot unmount existing Mount Point "%s"

Cause: The mount point is busy.

Action: Make sure the filesystem is not busy. Stop any processes or applications that may be accessing the filesystem.

104119 FATAL Invalid data replication resource type requested ("%s")

Cause: An invalid parameter was specified for the mirror create operation.
104124 EMERG WARNING: A temporary communication failure has occurred between systems %s and %s. In order to avoid data corruption, data resynchronization will not occur. MANUAL INTERVENTION IS REQUIRED. In order to initiate data resynchronization, you should take one of the following resources out of service: %s on %s or %s on %s. The resource that is taken out of service will become the mirror target.

Cause: A temporary communication failure (split-brain scenario) has occurred between the source and target servers.

Action: Perform the steps listed in the message text.
104125 ERROR failed to start ‘$cmd $_2 $user_args’ on ‘$_3‘

Cause: The specified command failed.

Action: Check the logs for related errors and try to resolve the reported problem.
104126 ERROR $_);

Cause: This message contains the output of the command that was reported as failing in message 104125.
104127 FATAL Cannot mount "%s" on "%s"

Cause: After successfully creating a new mirror, the file system could not be mounted on the new mirror device.

Action: Check the status of the mirror, that the mount point exists with no other file system mounted, system logs and LifeKeeper logs.
104128 FATAL comm path/server not specified

Cause: The netraid.down script was called without specifying the communication path or the server name. This script is called internally so should always have the proper parameters.

Action: Report this error to SIOS support.
104129 WARN

Cause: The replication connection for the mirror is down.

Action: Check the network.
104130 ERROR Mirror resize failed on %s (%s). You must successfully complete this operation before using the mirror. Please try again.

Cause: The mirror resize operation has failed to update the mirror metadata on the listed system.

Action: You must successfully complete the resize before using the mirror. Re-run mirror_resize (possibly using -f to force the operation if necessary).
104136 ERROR Extend failed.

Cause: The hierarchy extend operation failed.

Action: Check the logs for related errors and try to resolve the reported problem.
104143 ERROR Mirror resume was unsuccessful ($ret)

Cause: The mirror could not be established.

Action: Check the logs for related errors and try to resolve the reported problems.
104144 ERROR Unable to stop the mirror access for $self->{‘md’} on system $self->{‘sys’}. Error: $ret. Use the \"mdadm —stop $self->{‘md’}\" command to manually stop the mirror.

Cause: The mirror device created on the target node when the mirror was paused could not be stopped.

Action: Ensure that the device is not busy or mounted. Try running "mdadm —stop" manually to stop the device.
104145 WARN Unable to dirty full bitmap. Setting fullsync flag.

Cause: A full resync could not be done by dirtying the full bitmap. The fullsync flag will be used instead. This is a non-fatal error as a full synchronization will still be done.

Action: None
104156 WARN Resynchronization of "%s" is in PENDING state. Current sync_action is: "%s"

Cause: The resynchronization of the md device is detected in PENDING state.

Action: LifeKeeper will try to fix the issue by forcing a resynchronization. Check the logs for related errors. When successful assure that the PENDING state has been cleared in /proc/mdstat and the resynchronization is in progress or has been completed for the datarep resource.
104157 WARN /etc/sysconfig/raid-check update failed. Please %s \"md%d\" to SKIP_DEVS.

Cause: Unable to make changes in /etc/sysconfig/raid-check to add or remove an entry to the list of MD devices to skip (SKIP_DEVS).

Action: Check system logs for any errors related to raid-check or SKIP_DEVS. Manually add or remove md listed.
104158 EMERG WARNING: The local disk partition $self->{‘part’} for data replication device\n$self->{‘md’} has failed. MANUAL INTERVENTION IS REQUIRED.

Cause: The local device for a mirror failed. The recovery action has been set to nothing in LKDR_FAILURE requiring manual intervention to recover.

Action: Check system logs and LifeKeeper logs for errors related to the local disk.
104163 WARN The "%s_data_corrupt" flag is set in "%s/subsys/scsi/resources/netraid/" on system "%s". The mirror is being forced online.

Cause: The mirror is being forced online, overriding the data_corrupt flag. The data on the specified system will be treated as the latest data. If this is not correct then this can lead to data corruption or data loss.

Action: None
104164 ERROR The "%s_data_corrupt" flag for related mirror resource "%s" is set in "%s/subsys/scsi/resources/netraid/" on system "%s". To avoid data corruption, LifeKeeper will not restore this mirror or any related mirrors in the hierarchy.

Cause: The data_corrupt flag exists for one or more mirrors in the hierarchy. To avoid corrupting additional data none of the mirrors are brought in-service until all of the data_corrupt flags are resolved.

Action: Check the LifeKeeper logs to determine where each mirror was last in-service, aka where the latest data for each mirror resides. The mirrors should be brought in-service on the previous source where the full hierarchy was in-service and allow the mirrors to synchronize with all targets.
104165 ERROR The "%s_data_corrupt" flag for related mirror resource "%s" is set in "%s/subsys/scsi/resources/netraid/" on system "%s". The mirror resource "%s" is being forced online.

Cause: The mirror is being forced online, overriding the data_corrupt flag. The data on the specified system will be treated as the correct data to be synchronized with all targets. This can lead to data corruption or data loss if this is not the latest data.

Action: None
104170 ERROR Failed to create \"source\" flag file on shared source %s to track mirror source. This may result in a full resync.

Cause: The ‘source’ flag file was not created on the specified system to track the mirror source.

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full.
104171 ERROR Failed to create \"source\" flag file on %s to track mirror source. Target %s will not be added to mirror.

Cause: The ‘source’ flag file was not created on the specified system to track the mirror source.

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full.
104172 ERROR The \"source\" flag file on %s does not contain a valid target (%s). Full resync to remaining targets is required.

Cause: The ‘source’ flag file should contain the system name of a previous source but the name listed was not found in the list of systems configured.

Action: Report this problem to SIOS support.
104173 ERROR Failed to create \"source\" flag file on %s to track mirror source.

Cause: The ‘source’ flag file was not created on the specified system to track the mirror source

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full.
104174 ERROR Failed to create \"previous_source\" flag file to track time waiting on source. Will not be able to timeout.

Cause: The ‘previous_source’ flag file was not created on the mirror source to track the mirror’s previous source.

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full.
104175 ERROR Failed to create "data_corrupt" flag file on target "%s".

Cause: The ‘data_corrupt’ flag file was not created on the target listed.

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full.
104176 ERROR The \"source\" flag file on %s to track mirror source does not exist. Full resync is required.

Cause: The source flag file should exist on the system and without it the consistency of the mirror can not be verified. A full resync is required to assure data reliability.

Action: Check the LKROOT (/opt/LifeKeeper) file system for error or that it is full.
104177 ERROR Failed to determine amount of time waiting on %s.

Cause: The amount of time waiting for the previous source could not be determined. Targets will be added with a full resync if the previous source is not found.

Action: none
104178 ERROR Failed to update "source" flag file on target "%s", previous source must be merged first.

Cause: The source flag file on the target is updated when it is in-sync and stopped so the the next in-service does not require the previous source.

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full.
104180 ERROR Internal Error: \"previous_source\" has the local system name (%s).

Cause: The local system name should not be in the previous_source flag file.

Action: Report this error to SIOS support.
104181 ERROR Internal Error: There are no targets waiting on %s to be merged.

Cause: There are no targets waiting for a previous source to merge.

Action: Report this error to SIOS support.
104182 ERROR Failed to create \"source\" flag file on %s to track mirror source. This may result in a full resync.

Cause: The ‘source’ flag file was not created on the target listed.

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full.
104186 ERROR Failed to create \"last_owner\" flag file on %s to track mirror source. This may allow in-service of mirror on old data.

Cause: The ‘last_owner’ flag file was not created on the source.

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full.
104187 WARN $REM_MACH has ${REM_TAG}_last_owner file, create flag ${FLAGTAG}_data_corrupt.

Cause: The system listed had the mirror in-service last.

Action: The system listed has the last_owner file that indicates it has the most recent data and is most likely the best system to in-service the mirror to avoid losing data.
104188 WARN $REM_MACH is not alive, create flag ${FLAGTAG}_data_corrupt.

Cause: The system listed is not alive.

Action: Since the system listed is not alive, it cannot be determined whether that system was a more recent mirror source than the local system. Therefore the local system should not automatically be allowed to bring the mirror in-service.
104200 EMERG Continue to wait for %s to merge bitmap and do partial resyncs to all targets, no timeout set.

Cause: In a multi-target configuration targets will not be configured until the previous source is available to merge its bitmap so that all targets will be able to partially resynchronize. The LKDR_WAIT_ON_PREVIOUS_SOURCE_TIMEOUT entry in /etc/defaults/LifeKeeper is set to “-1” to wait indefinitely.

Action: Check on the status of the previous source listed in the message and resolve any issues that are preventing it from rejoining the cluster.
104201 EMERG To stop waiting for the previous source (forcing a full resync to remaining waiting targets) run: \"%s/bin/mirror_action %s fullresync %s %s\" on %s.

Cause: In a multi-target configuration targets are not being configured, waiting on the previous source to rejoin the cluster.

Action: Run the command listed in the message to force an immediate full resynchronization to this target and any remaining targets waiting to be resynchronized.
104202 EMERG Continue to wait for %s to merge bitmap and do partial resyncs to all targets. Continue to wait %d more seconds.

Cause: In a multi-target configuration targets will not be configured until the previous source is available to merge its bitmap so that all targets will be able to partially resynchronize. The LKDR_WAIT_ON_PREVIOUS_SOURCE_TIMEOUT entry in /etc/defaults/LifeKeeper is set to the number of seconds to wait. If the previous source does not join the cluster in that time then targets will be added with a full resynchronization.

Action: Check on the status of the previous source listed in the message and resolve any issues that are preventing it from rejoining the cluster.
104203 EMERG To stop waiting for the previous source (forcing a full resync to remaining waiting targets) run: \"%s/bin/mirror_action %s fullresync %s %s\" on %s.

Cause: In a multi-target configuration targets are not being configured, waiting on the previous source to rejoin the cluster.

Action: Run the command listed in the message to force an immediate full resynchronization to this target and any remaining targets waiting to be resynchronized.
Note: Run this command to stop waiting even if the target listed is deleted and never returning.
104207 ERROR Failed to create "data_corrupt" flag file on "%s".

Cause: The ‘data_corrupt’ flag file was not created on the source listed.

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full.
104208 ERROR Failed to create "data_corrupt" flag file on target "%s".

Cause: The ‘data_corrupt’ flag file was not created on the target listed.

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full.
104209 ERROR Failed to create "data_corrupt" flag file on "%s".

Cause: The ‘data_corrupt’ flag file was not created on the source listed.

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full.
104210 ERROR Failed to create "data_corrupt" flag file on target "%s".

Cause: The ‘data_corrupt’ flag file was not created on the target listed.

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full.
104211 ERROR Failed to create "data_corrupt" flag file on target "%s".

Cause: The ‘data_corrupt’ flag file was not created on the target listed.

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full.
104212 ERROR The \"source\" flag file on %s to track mirror source does not exist. Full resync to remaining targets is required.

Cause: The source flag file should exist on the system and without it the consistency of the mirror can not be verified. A full resync is required to assure data reliability. All targets not already being mirrored will require a full resync.

Action: Check the LKROOT (/opt/LifeKeeper) file system for error or that it is full.
104214 ERROR Failed to create \"source\" flag file on %s to track mirror source.

Cause: The ‘source’ flag file was not created on the specified system to track the mirror source.

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full.
104216 ERROR Failed to create "data_corrupt" flag file on target "%s".

Cause: The ‘data_corrupt’ flag file was not created on the target listed.

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full.
104217 ERROR Failed to create \"source\" flag file on shared source %s to track mirror source. This may result in a full resync.

Cause: The ‘source’ flag file was not created on the specified system to track the mirror source.

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full.
104218 ERROR Failed to create "data_corrupt" flag file on target "%s".

Cause: The ‘data_corrupt’ flag file was not created on the target listed.

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full
104221 ERROR Failed to create \"last_owner\" flag file on %s to track mirror source. This may allow in-service of mirror on old data.

Cause: The ‘last_owner’ flag file was not created on the target listed.

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full.
104222 ERROR Failed to create "last_owner" flag file to track mirror source". This may allow in-service of mirror on old data.

Cause: The ‘last_owner’ flag file is used to know where the mirror was last in-service.

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full.
104223 ERROR Failed to create "last_owner" flag file to track mirror source". This may allow in-service of mirror on old data.

Cause: The ‘last_owner’ flag file is used to know where the mirror was last in-service.

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full.
104224 ERROR Failed to create \"previous_source\" flag file.

Cause: The ‘previous_source’ flag file was not created. This is needed to merge the previous source bitmap to avoid a full resync.

Action: Check the LKROOT (/opt/LifeKeeper) file system for errors or that it is full.
104227 ERROR Failed to set %s to %s.

Cause: This message indicates a failure to set a sysfs parameter for the nbd driver (/sys/block/nbdX).

Action: It may be necessary to adjust one or more of:

NBD_NR_REQUESTS
NBD_SCHEDULER
LKDR_ASYNC_LIMIT

in /etc/default/LifeKeeper to avoid this error.
104251 ERROR There is no LifeKeeper protected resource with tag $tag on system $me.

Cause: The given tag does not correspond to a LifeKeeper protected resource on the given system.

Action: Verify that the resource tag and system name are correct.
104252 ERROR Resource $tag is not a $app/$typ resource. Please use the $ins_app/$ins_typ resource-specific canfailover script instead.

Cause: The scsi/netraid-specific canfailover script was called for a non-scsi/netraid resource.

Action: Use the canfailover script, if it exists, corresponding to the appropriate app and type of the given resource.
122005 ERROR Unable to "%s" on "%s"

Cause: There was an unexpected error running "getlocks".

Action: Check the logs for related errors and try to resolve the reported problem.

122007 ERROR Unable to "%s" on "%s"

Cause: There was an unexpected error running "rlslocks".

Action: Check the logs for related errors and try to resolve the reported problem.

122009 ERROR The path %s is not a valid file.

Cause: There is no listener.ora file.

Action: Ensure the file exists and retry the operation.
122010 ERROR The listener user does not exist on the server %s.

Cause: "Stat" command could not get user id.

Action: Retry the operation.
122011 ERROR The listener user does not exist on the server %s.

Cause: UID is not in passwd file.

Action: Ensure the UID exists in passwd file and retry the operation.
122012 ERROR The listener user does not exist on the server %s.

Cause: User name is not in passwd file.

Action: Ensure the user name exists in passwd file; retry the operation.
122023 ERROR The %s command failed (%d)

Cause: This message contains the return code of the "lsnrctl" command.

Action: Check the logs for related errors and try to resolve the reported problem.
122024 ERROR $line

Cause: The message contains the output of the "lsnrctl" command.

Action: Check the logs for related errors and try to resolve the reported problem.
122039 ERROR Usage error

Cause: Invalid parameters were specified for the restore operation.

Action: Verify the parameters and retry the operation.
122040 ERROR Script $cmd has hung on the restore of \"$opt_t\". Forcibly terminating.

Cause: The listener restore script reached its timeout value.

Action: Ensure listener.ora is valid and that LSNR_START_TIME (default 35 seconds) in /etc/default/LifeKeeper is set to a value greater than or equal to the time needed to start the listener.
122041 ERROR END failed %s of "%s" on server "%s" due to a "%s" signal

Cause: LifeKeeper was unable to restore the resource {resource} on {server}.

Action: Check the logs for related errors and try to resolve the reported problem.
122045 ERROR Error getting resource information for resource "%s" on server "%s"

Cause: Failed to get resource information.

Action: Check your LifeKeeper configuration.
122046 ERROR Usage error

Cause: Invalid parameters were specified for the restore operation.

Action: Verify the parameters and retry the operation.
122049 ERROR The script $cmd has hung on remove of \"$opt_t\". Forcibly terminating.

Cause: The listener remove script reached its timeout value.

Action: Ensure listener.ora is valid and that LSNR_STOP_TIME (default 35 seconds) in /etc/default/LifeKeeper is set to a value greater than or equal to the time needed to stop the listener.
122051 ERROR Error getting resource information for resource "%s" on server "%s"

Cause: LifeKeeper was unable to find the resource {tag} on {server}.

Action: Check your LifeKeeper configuration.
122055 ERROR END failed %s of "%s" on server "%s" due to a "%s" signal

Cause: LifeKeeper was unable to quickCheck the resource {resource} on {server}.

Action: Check the logs for related errors and try to resolve the reported problem.
122057 ERROR Error getting resource information for resource "%s" on server "%s"

Cause: LifeKeeper was unable to find the resource {tag} on {server}.

Action: Check your LifeKeeper configuration.
122064 WARN The %s level is set to %s a %s will not occur.

Cause: The minimal Listener protection level is Start and Monitor.

Action: Start the listener manually.
122066 ERROR Script has hung checking \"$tag\". Forcibly terminating.

Cause: The listener quickCheck script reached its timeout value.

Action: Ensure listener.ora is valid and that LSNR_STATUS_TIME (default 15 seconds) in /etc/default/LifeKeeper is set to a value greater than or equal to the time needed to check the listener.
122067 ERROR Usage error

Cause: Invalid parameters were specified for the quickCheck operation.

Action: Verify the parameters and retry the operation.
122069 ERROR Usage error

Cause: Invalid parameters were specified for the delete operation.

Action: Verify the parameters and retry the operation.
122072 ERROR %s: resource "%s" not found on local server

Cause: Invalid parameters were specified for the recover operation.

Action: Verify the parameters and retry the operation.
122074 WARN The local recovery attempt has failed but %s level is set to %s preventing a failover to another node in the cluster. With %s recovery set all local recovery failures will exit successfully to prevent resource failovers.

Cause: The optional listener recovery level is set to local recovery only.

Action: Switch over the resource tree manually.
122078 ERROR END failed %s of "%s" on server "%s" due to a "%s" signal

Cause: LifeKeeper was unable to recover the resource {resource} on {server}.

Action: Check the logs for related errors and try to resolve the reported problem.
122082 ERROR Error getting resource information for resource "%s" on server "%s"

Cause: LifeKeeper was unable to find the resource {tag} on {server}.

Action: Check your LifeKeeper configuration.
122083 ERROR $cmd has hung checking \"$tag\". Forcibly terminating

Cause: The recover script was stopped by signal.

Action: Ensure listener.ora is valid.
122084 ERROR Cannot extend resource "%s" to server "%s"

Cause: LifeKeeper was unable to extend the resource {resource} on {server}.

Action: Verify the parameters and retry the operation.
122085 ERROR Usage: %s %s

Cause: Invalid parameters were specified for the canextend operation.

Action: Verify the parameters and retry the operation.
122086 ERROR The values specified for the target and the template servers are the same. Please specify the correct values for the target and template servers.

Cause: The values specified for the target and the template servers are the same.

Action: Perform the steps listed in the message text.
122087 ERROR Error getting resource information for resource "%s" on server "%s"

Cause: LifeKeeper was unable to find the resource {tag} on {server}.

Action: Check your LifeKeeper configuration.
122088 ERROR Error getting resource information for resource "%s" on server "%s"

Cause: Failed to get listener user name from resource information.

Action: Ensure the resource info field is valid then retry the operation.
122089 ERROR The listener user %s does not exist on the server %s.

Cause: User name is not in passwd file.

Action: Ensure the user name exists in passwd file and retry the operation.
122090 ERROR The id for user %s is not the same on template server %s and target server %s.

Cause: User ID should be same on both servers.

Action: Trim user ID to the same.
122091 ERROR The group id for user %s is not the same on template server %s and target server %s.

Cause: Group ID should be same on both servers.

Action: Trim group ID to the same.
122092 ERROR Cannot access canextend script "%s" on server "%s"

Cause: LifeKeeper was unable to run pre-extend checks because it was unable to find the "canextend" script on {server}.

Action: Check your LifeKeeper configuration.
122097 ERROR Usage: %s %s

Cause: Invalid arguments were specified for the "configActions" operation.

Action: Verify the arguments and retry the operation.
122098 ERROR Error getting resource information for resource "%s" on server "%s"

Cause: LifeKeeper was unable to find the resource {tag} on {server}.

Action: Check your LifeKeeper configuration.
122099 ERROR Unable to update the resource %s to change the %s to %s on %s.

Cause: LifeKeeper failed to put information into the info field.

Action: Restart LifeKeeper and retry the operation.
122100 ERROR Error getting resource information for resource "%s" on server "%s"

Cause: LifeKeeper was unable to find the resource {tag} on {server}.

Action: Check your LifeKeeper configuration.
122101 ERROR Unable to update the resource %s to change the %s to %s on %s.

Cause: LifeKeeper failed to put information to info field on {server}.

Action: Restart LifeKeeper on {server} and retry the operation.
122103 ERROR Usage: %s %s

Cause: Invalid parameters were specified for the create operation.

Action: Verify the parameters and retry the operation.
122124 ERROR END failed hierarchy "%s" of resource "%s" on server "%s" with return value of %d

Cause: LifeKeeper was unable to create the resource {resource} on {server}.

Action: Check the logs for related errors and try to resolve the reported problem.
122126 ERROR Unable to "%s" on "%s

Cause: There was an unexpected error running "rlslocks".

Action: Check the logs for related errors and try to resolve the reported problem.

122127 ERROR END failed %s of "%s" on server "%s" due to a "%s" signal

Cause: LifeKeeper was unable to create the resource {resource} on {server}.

Action: Check the logs for related errors and try to resolve the reported problem.
122129 ERROR Unable to "%s" on "%s

Cause: There was an unexpected error running "getlocks."

Action: Check the logs for related errors and try to resolve the reported problem.

122131 ERROR Error creating resource "%s" on server "%s"

Cause: LifeKeeper was unable to create the resource {resource} on {server}.

Action: Check your LifeKeeper configuration.
122133 ERROR Unable to create a file system resource hierarchy for the file system %s.

Cause: There was an unexpected error running "filesyshier."

Action: Check adjacent log messages for further details.
122135 ERROR Unable to create a dependency between parent tag %s and child tag %s.

Cause: There was an unexpected error running "dep_create."

Action: Check the logs for related errors and try to resolve the reported problem.
122140 ERROR Resource "%s" is not ISP on server "%s" Manually bring the resource in service and retry the operation

Cause: IP resource {tag} which the listener resource depends on should be ISP.

Action: Perform the steps listed in the message text.
122141 ERROR Unable to create a dependency between parent tag %s and child tag %s.

Cause: There was an unexpected error running "dep_create."

Action: Check the logs for related errors and try to resolve the reported problem.
122144 ERROR Usage: %s %s

Cause: Invalid parameters were specified for the "create_ins" operation.

Action: Verify the parameters and retry the operation.
122145 ERROR An error has occurred in utility %s on server %s. View the LifeKeeper logs for details and retry the operation.

Cause: There was an unexpected error running "app_create."

Action: Check the logs for related errors and try to resolve the reported problem.

122146 ERROR An error has occurred in utility %s on server %s. View the LifeKeeper logs for details and retry the operation.

Cause: There was an unexpected error running "typ_create."

Action: Check the logs for related errors and try to resolve the reported problem.

122147 ERROR An error has occurred in utility %s on server %s. View the LifeKeeper logs for details and retry the operation.

Cause: There was an unexpected error running "newtag."

Action: Check the logs for related errors and try to resolve the reported problem.

122148 ERROR Error creating resource "%s" on server "%s"

Cause: LifeKeeper was unable to create the resource {resource} on {server}.

Action: Check your LifeKeeper configuration.
122149 ERROR An error has occurred in utility %s on server %s. View the LifeKeeper logs for details and retry the operation.

Cause: There was an unexpected error running "ins_setstate."

Action: Check the logs for related errors and try to resolve the reported problem.

122150 ERROR Error creating resource "%s" on server "%s"

Cause: LifeKeeper was unable to create the resource {resource} on {server}.

Action: Check your LifeKeeper configuration.
122151 ERROR Usage: %s %s

Cause: Invalid arguments were specified for the "depstoextend" operation.

Action: Verify the arguments and retry the operation.
122152 ERROR Usage: %s %s

Cause: Invalid parameters were specified for the "extend" operation.

Action: Verify the parameters and retry the operation.
122153 ERROR Error getting resource information for resource "%s" on server "%s"

Cause: LifeKeeper was unable to find the resource {tag} on {server}.

Action: Check your LifeKeeper configuration.
122154 ERROR Cannot extend resource "%s" to server "%s"

Cause: LifeKeeper was unable to extend the resource {resource} on {server}.
122155 ERROR Resource with either matching tag "%s" or id "%s" already exists on server "%s" for App "%s" and Type "%s"

Cause: During the Listener resource extension, a resource instance was found using the same {tag} and/or {id} but with a different resource application and type.

Action: Resource IDs must be unique. The resource instance with the ID matching the Oracle Listener resource instance must be removed.
122156 ERROR Cannot access extend script "%s" on server "%s"

Cause: LifeKeeper was unable to extend the resource hierarchy because it was unable to the find the script EXTEND on {server}.

Action: Check your LifeKeeper configuration.
122157 ERROR Usage: %s %s

Cause: Invalid arguments were specified for the "getConfigIps" operation.

Action: Verify the arguments and retry the operation.
122158 ERROR The file %s is not a valid listener file. The file does not contain any listener definitions.

Cause: Failed to find any listener definitions.

Action: Ensure listener definition is in the listener.ora and retry the operation.
122159 ERROR Usage: %s %s

Cause: Invalid arguments were specified for the "getSidListeners" operation.

Action: Verify the arguments and retry the operation.
122160 ERROR The file %s is not a valid listener file. The file does not contain any listener definitions.

Cause: Failed to find any listener definitions.

Action: Ensure listener definition is in the listener.ora and retry the operation.
122161 ERROR Usage: %s %s

Cause: Invalid arguments were specified for the "lsn-display" operation.

Action: Verify the arguments and retry the operation.
122162 ERROR Error getting resource information for resource "%s" on server "%s"

Cause: LifeKeeper was unable to find the resource {tag} on {server}.

Action: Check your LifeKeeper configuration.
122163 ERROR Usage: %s %s

Cause: Invalid parameters were specified for the updateHelper operation.

Action: Verify the parameters and retry the operation.
122164 ERROR END failed hierarchy "%s" of resource "%s" on server "%s" with return value of %d

Cause: LifeKeeper was unable to update the resource {resource} on {server}.

Action: Check the logs for related errors and try to resolve the reported problem.
122166 ERROR Usage: %s %s

Cause: Invalid parameters were specified for the "updateHelper" operation.

Action: Verify the parameters and retry the operation.
122170 ERROR Unable to create a dependency between parent tag %s and child tag %s.

Cause: There was an unexpected error running "dep_create."

Action: Check the logs for related errors and try to resolve the reported problem.
122171 ERROR Unable to create a dependency between parent tag %s and child tag %s.

Cause: There was an unexpected error running "dep_create."

Action: Check the logs for related errors and try to resolve the reported problem.
122172 ERROR Usage: %s %s

Cause: Invalid arguments were specified for the "updIPDeps" operation.

Action: Verify the arguments and retry the operation.
122173 ERROR END failed hierarchy "%s" of resource "%s" on server "%s" with return value of %d

Cause: LifeKeeper was unable to update the resource {resource} on {server}.

Action: Check the logs for related errors and try to resolve the reported problem.
122175 ERROR Unable to "%s" on "%s

Cause: There was an unexpected error running "rlslocks."

Action: Check the logs for related errors and try to resolve the reported problem.

122177 ERROR Unable to "%s" on "%s

Cause: There was an unexpected error running "getlocks."

Action: Check the logs for related errors and try to resolve the reported problem.

122180 ERROR Unable to create a dependency between parent tag %s and child tag %s.

Cause: There was an unexpected error running "dep_create."

Action: Check the logs for related errors and try to resolve the reported problem.
122181 ERROR Unable to create a dependency between parent tag %s and child tag %s.

Cause: There was an unexpected error running "dep_create."

Action: Check the logs for related errors and try to resolve the reported problem.
122183 ERROR The path %s is not a valid file.

Cause: There is no listener.ora file.

Action: Ensure the file exists and retry the operation.
122185 ERROR The file %s is not a valid listener file. The file does not contain any listener definitions.

Cause: LifeKeeper failed to find any valid listener definitions.

Action: Ensure there are valid listener definitions in the listener.ora and retry the operation.
122186 ERROR The value specified for %s cannot be empty. Please specify a value for this field.

Cause: The config and/or executable {path} field is empty.

Action: Input a non-empty value for {path} and retry the operation.
122187 ERROR The path %s is not a valid file or directory.

Cause: The defined {path} is invalid.

Action: Ensure the {path} exists and retry the operation.
122188 ERROR The path %s is not a valid file or directory.

Cause: There is no {path}.

Action: Ensure the {path} exists and retry the operation.
122189 ERROR The value specified for %s cannot be empty. Please specify a value for this field.

Cause: The config and/or executable Path field is empty.

Action: Input path for the field.
122190 ERROR Usage: %s %s

Cause: Invalid arguments were specified for the "valid_rpath" operation.

Action: Verify the arguments and retry the operation.
122191 ERROR The values specified for the target and the template servers are the same.

Cause: Invalid argument of valid_rpath.

Action: Ensure arguments and retry the operation.
122192 ERROR Unable to find the configuration file "oratab" in its default locations, /etc/oratab or %s on "%s"

Cause: There is no oratab file in /etc/oratab or {path}.

Action: Ensure oratab file exists in {path} or ORACLE_ORATABLOC in /etc/default/Lifekeeper is set to a valid path.
122193 ERROR Unable to find the configuration file "oratab" in its default locations, /etc/oratab or %s on "%s"

Cause: There is no oratab file in /etc/oratab or {path}.

Action: Ensure oratab file exists in {path} or ORACLE_ORATABLOC in /etc/default/Lifekeeper is set to a valid path.
122194 ERROR Unable to find the configuration file "oratab" in its default locations, /etc/oratab or %s on "%s"

Cause: There is no oratab file in /etc/oratab or {path}.

Action: Ensure oratab file exists in {path} or ORACLE_ORATABLOC in /etc/default/Lifekeeper is set to a valid path.
122195 ERROR Unable to find the configuration file "oratab" in its default locations, /etc/oratab or %s on "%s"

Cause: There is no oratab file in /etc/oratab or {path}.

Action: Ensure oratab file exists in {path} or ORACLE_ORATABLOC in /etc/default/Lifekeeper is set to a valid path.
122196 ERROR END failed %s of "%s" on server "%s" due to a "%s" signal

Cause: LifeKeeper was unable to remove the resource {resource} on {server}.

Action: Check the logs for related errors and try to resolve the reported problem.
122197 ERROR Unable to find the configuration file \"oratab\" in its default locations, /etc/oratab or $listener::oraTab on \"$me\"

Cause: There is no oratab file in /etc/oratab or {path}.

Action: Ensure oratab file exists in {path} or ORACLE_ORATABLOC in /etc/default/Lifekeeper is set to a valid path.
122198 ERROR remove for $okListener failed.
122500 ERROR Usage: %s %s

Cause: Invalid parameters were specified for the create operation.

Action: Verify the parameters are correct and retry the operation.
122501 ERROR DB instance "%s" is already protected on "%s".

Cause: An attempt was made to protect an Oracle database instance {sid} that is already under LifeKeeper protection on {server}.

Action: You must select a different database instance {sid} for LifeKeeper protection.
122502 ERROR Failed to create object instance for Oracle on "%s".

Cause: There was an unexpected error creating an internal representation of the Oracle instance being protected.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
122503 ERROR Unable to locate the oratab file "%s" on "%s".

Cause: The oratab file was not found at the default or alternate locations on {server}.

Action: Verify the oratab file exists and has proper permissions for the Oracle user. A valid oratab file is required to complete the "create" operation.
122504 ERROR Unable to determine Oracle user for "%s" on "%s".

Cause: The Oracle Application Recovery Kit was unable to determine the ownership of the Oracle database installation binaries.

Action: The owner of the Oracle binaries must be a valid non-root user on {server}. Correct the permissions and ownership of the Oracle database installation and retry the operation.
122505 ERROR The Oracle database "%s" is not running or no open connections are available on "%s".

Cause: The database instance {sid} was not running or connections to the database were not available via the credentials provided.

Action: The database instance {sid} must be started on {server} and the proper credentials must be provided for the completion of the "create" operation.
122506 ERROR Unable to determine Oracle dbspaces and logfiles for "%s" on "%s".

Cause: A query to determine the location of required tablespaces, logfiles and related database files failed. This may have been caused by an internal database error.

Action: Check the adjacent log messages for further details and related errors. Check the Oracle log (alert.log) and related trace logs (*.trc) for additional information and correct the reported problem(s).
122507 ERROR Unknown chunk type found for "%s" on "%s".

Cause: The specified tablespace, logfile or other required database file is not one of the LifeKeeper supported file or character device types.

Action: The specified file {database_file} must reference an existing character device or file. Consult the Oracle installation documentation to recreate the specified file {database_file} as a supported file or character device type.
122508 ERROR DB Chunk "%s" for "%s" on "%s" does not reside on a shared file system.

Cause: The specified tablespace, logfile or other required database file {database_file} does not reside on a file system that is shared with other systems in the cluster.

Action: Use the LifeKeeper UI or "lcdstatus (1M)" to verify that communication paths have been properly created. Use "rpm" to verify that the necessary Application Recovery Kits for storage protection have been installed. Verify that the file is, in fact, not on shared storage, and if not, move it to a shared storage device.
122510 ERROR File system create failed for "%s" on "%s". Reason

Cause: LifeKeeper was unable to create the resource {filesystem} on the specified server {server}.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the "create" operation.
122511 ERROR %s

Cause: The message contains the output of the "filesyshier" command.

Action: Check the adjacent log messages for further details and related messages. Correct any reported errors.
122513 ERROR Dependency creation between Oracle database "%s (%s)" and the dependent resource "%s" on "%s" failed. Reason

Cause: LifeKeeper was unable to create a dependency between the database resource {tag} and the necessary child resource {childtag}.

Action: Check adjacent log messages for further details and related messages. Once any problems have been corrected, it may be possible to create the dependency between {tag} and {childtag} manually.
122514 ERROR Unable to "%s" on "%s" during resource create.

Cause: The Oracle Application Recovery Kit was unable to release the administrative lock using the "rlslocks" command.

Action: Check adjacent log messages for further details and related messages.
122516 ERROR Raw device resource created failed for "%s" on "%s". Reason

Cause: LifeKeeper was unable to create the resource {raw device} on the specified server {server}.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the "create" operation.
122519 ERROR In-service attempted failed for tag "%s" on "%s".

Cause: The "perform_action" command for {tag} on {server} failed to start the database {sid}. The in-service operation has failed.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the "create" operation.
122521 ERROR Create of app "%s" on "%s" failed with return code of "%d".

Cause: There was an error running the command "app_create" to create the internal application type.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
122522 ERROR Create of typ "%s" for app "%s" on "%s" failed with return code of "%d".

Cause: There was an error running the command "typ_create" to create the internal resource type.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
122523 ERROR Create of resource tag via "newtag" on "%s" failed.
122524 ERROR Setting "resstate" for resource "%s" on "%s" failed with return code of "%d".

Cause: There was an error running the command "ins_setstate" to set the resource state to {state}.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
122525 ERROR The values specified for the target and the template servers are the same: "%s".

Cause: The value specified for the target and template servers for the "extend" operation were the same.

Action: You must specify the correct parameter for the {target server} and {template server}. The {target server} is the server where the {tag} will be extended.
122526 ERROR Unable to locate the oratab file in "/etc" or in "%s" on "%s".

Cause: The oratab file was not found at the default or alternate locations on {server}.

Action: Verify the oratab file exists and has proper permissions for the Oracle user. A valid oratab file is required to complete the "extend" operation.
122527 ERROR Unable to retrieve the Oracle user on "%s".

Cause: An attempt to retrieve the Oracle user from {template server} during a "canextend" or "extend" operation failed.

Action: The owner of the Oracle binaries must be a valid user on {target server} and {template server}. Correct the permissions and ownership of the Oracle database installation and retry the operation.
122528 ERROR The Oracle user and/or group information for user "%s" does not exist on the server "%s".

Cause: LifeKeeper is unable to find the Oracle user and/or group information for the Oracle user {user} on the server {server}.

Action: Verify the Oracle user {user} exists on the specified {server}. If the user {user} does not exist, it should be created with the same uid and gid on all servers in the cluster.
122529 ERROR The id for user "%s" is not the same on template server "%s" and target server "%s".

Cause: The user id on the target server {target server} for the Oracle user {user} does not match the value of the user {user} on the template server {template server}.

Action: The user ids for the Oracle user {user} must match on all servers in the cluster. The user id mismatch should be corrected manually on all servers before retrying the "extend" operation.

122530 ERROR The group id for user "%s" is not the same on template server "%s" and target server "%s".

Cause: The group id on the target server {target server} for the Oracle user {user} does not match the value of the user {user} on the template server {template server}.

Action: The group ids for the Oracle user {user} must match on all servers in the cluster. The group id mismatch should be corrected manually on all servers before retrying the "extend" operation.
122532 ERROR No file system or raw devices found to extend for "%s" on "%s".

Cause: There were no dependent file system or raw device resources found for the Oracle resource {tag} on server {template server}.

Action: Check adjacent log messages for further details and related messages.
122533 WARN A RAMDISK (%s) was detected in the ORACLE Database configuration for "%s" on "%s". LifeKeeper cannot protect RAMDISK. This RAMDISK resource will not be protected by LifeKeeper! ORACLE hierarchy creation will continue.

Cause: The specified tablespace, logfile or other database file {database_file} was detected as a ramdisk. No protection is available for this type of resource in the current LifeKeeper product.

Action: The ramdisk will not be protected. You must manually ensure that the required database file {database_file} will be available during all Oracle database operations.
122534 ERROR Failed to initialize object instance for Oracle sid "%s" on "%s".

Cause: There was an unexpected error creating an internal representation of the Oracle instance being protected.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
122537 ERROR Update of instance info field for "%s" on "%s" failed (%s).

Cause: There was an error while running the command "ins_setinfo" to update the internal resource information field.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
122538 ERROR Initial connect with query buffer to database "%s" on "%s" failed, testing output.

Cause: A connection attempt to the Oracle database {sid} to determine the database status has failed.

Action: The connection attempt failed with the specified credentials. Check the adjacent log messages for further details and related errors. Check the Oracle log (alert.log) and related trace logs (*.trc) for additional information and correct the reported problem(s).
122542 ERROR The "%s [ %s ]" attempt of the database "%s" appears to have failed on "%s".

Cause: The attempted Oracle action {action} using method {action_method} for the database instance {sid} failed on the server {server}.

Action: Check the adjacent log messages for further details and related errors. Check the Oracle log (alert.log) and related trace logs (*.trc) for additional information and correct the reported problem(s).
122543 ERROR All attempts to "%s" database "%s" on "%s" failed

Cause: All efforts to perform the action {action} on the Oracle database {sid} on server {server} have failed.

Action: Check the adjacent log messages for further details and related errors. Check the Oracle log (alert.log) and related trace logs (*.trc) for additional information and correct the reported problem(s).
122544 ERROR Update of "%s" sid "%s" on "%s" failed. Reason: "%s" "%s" failed: "%s".

Cause: An unexpected error occurred while attempting to update the oratab entry for the database {sid}. The error occurred while attempting to open the oratab file.

Action: The oratab file entry for {sid} will need to be updated manually to turn off the automatic start up of the database at system boot.
122545 ERROR Unable to locate the oratab file in "/etc" or in "%s" on "%s".

Cause: The oratab file was not found at the default or alternate locations on {server}.

Action: Verify the oratab file exists and has proper permissions for the oracle user. A valid oratab file is required to complete the "extend" operation.
122546 ERROR Unable to open file "%s" on "%s" (%s).

Cause: The specified file {file} could not be opened or accessed on the server {server} due to the error {error}.

Action: Verify the existence and permissions on the specified file {file}. Check adjacent log messages for further details and related errors. You must correct any reported errors before retrying the operation.
122547 ERROR (cleanUpPids):Forcefully killing hung pid(s):pid(s)="%s"

Cause: The process {pid} failed to respond to the request to terminate gracefully. The process {pid} will be forcefully terminated.

Action: Use the command line to verify that the process {pid} has been terminated. Check the adjacent log messages for further details and related messages.
122548 ERROR Unable to locate the DB utility (%s/%s) on this host.

Cause: The Oracle binaries and required database utility {utility} located at {path/utility} were not found on this server {server}.

Action: Verify that the Oracle binaries and required software utilities are installed and properly configured on the server {server}. The Oracle binaries must be installed locally on each node or located on shared storage available to all nodes in the cluster.

122549 ERROR Oracle internal error or non-standard Oracle configuration detected. Oracle User and/or Group set to "root".

Cause: The detected ownership of the Oracle database installation resolves to the root user and/or root group. Ownership of the Oracle installation by root is a non-standard configuration.

Action: The owner of the Oracle binaries must be a valid non-root user on {server}. Correct the permissions and ownership of the Oracle database installation and retry the operation.
122550 ERROR Initial inspection of "%s" failed, verifying failure or success of received output.

Cause: The previous Oracle query {query} or command {cmd} failed to return success.

Action: Check the adjacent log messages for further details and related errors. Check the Oracle log (alert.log) and related trace logs (*.trc) for additional information and correct the reported problem(s).
122551 ERROR Logon failed with "%s" for "%s" on "%s". Please check username/password and privileges.

Cause: The logon with the credentials {credentials} for the database instance {sid} on server {server} failed. An invalid user {user} or password was specified.

Action: Verify that the Oracle database user {user} and password {password} are indeed valid. In addition, the Oracle database user {user} must have sufficient privileges for the attempted action.
122552 ERROR %s

Cause: The message contains the output of the "sqlplus" command.

Action: Check adjacent log messages for further details and related messages.
122553 ERROR Unable to open file "%s" on "%s" (%s).

Cause: The specified file {file} could not be opened or accessed on the server {server} due to the error {error}.

Action: Verify the existence and permissions on the specified file {file}. Check adjacent log messages for further details and related errors. You must correct any reported errors before retrying the operation.
122554 ERROR The tag "%s" on "%s" is not an Oracle instance or it does not exist.

Cause: The specified tag {tag} on server {server} does not refer to an existing and valid Oracle resource instance.

Action: Use the UI or "lcdstatus (1M)" to verify the existence of the resource tag {tag}. The resource tag {tag} must be an Oracle resource instance to use the command "ora-display."
122555 ERROR Failed to create object instance for Oracle on "%s".

Cause: There was an unexpected error creating an internal representation of the Oracle instance being protected while attempting to update the authorized user, password and database role for the Oracle resource instance.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
122557 ERROR Update of user and password failed for "%s" on "%s".

Cause: A request to update the user and password for the resource tag {tag} failed. The specified credentials failed the initial validation/connection attempt on server {server}.

Action: Verify the correct credentials {user/password} were specified for the attempted operation. Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
122559 ERROR Update of user and password failed for "%s" on "%s".

Cause: The update of the user and password information for the resource tag {tag} on server {server} failed.

Action: Verify the correct credentials {user/password} were specified for the attempted operation. Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
122562 ERROR Unable to find the Oracle executable "%s" on "%s".

Cause: The required Oracle executable {exe} was not found on this server {server}.

Action: Verify that the Oracle binaries and required software utilities are installed and properly configured on the server {server}. The Oracle binaries must be installed locally on each node or located on shared storage available to all nodes in the cluster.
122566 ERROR Unable to find Oracle home for "%s" on "%s".

Cause: The Oracle home directory {Oracle home} does not appear to contain files necessary for the proper operation of the Oracle instance {sid}.

Action: Verify using the command line that the Oracle home directory {Oracle home} contains the Oracle binaries, a valid spfile{sid}.ora or init{sid}.ora file.
122567 ERROR Oracle SID mismatch. The instance SID "%s" does not match the SID "%s" specified for the command.

Cause: There was an unexpected error creating an internal representation of the Oracle instance being protected. The specified internal ID {id} does not match the expected SID {sid}.

Action: Verify the parameters are correct. Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
122568 ERROR DB Processes are not running on "%s".

Cause: A process check for the Oracle instance did not find any processes running on server {server}.

Action: If local recovery is enabled, the Oracle instance will be restarted locally. Check adjacent log messages for further details and related messages.
122572 ERROR Failed to create flag "%s" on "%s".

Cause: An unexpected error occurred attempting to create a flag for controlling Oracle local recovery processing causing a failover to the standby node.

Action: Check the adjacent log messages for further details and related messages. Correct any reported errors.
122574 ERROR all attempts to shutdown the database %s failed on "%s".

Cause: The shutdown of the Oracle database failed during a local recovery process most likely caused because the maximum number of database connections has been reached.

Action: Check the Oracle logs for connection failures caused by the maximum number of available connections being reached, and if found, consider increasing the value. Additionally, set the tunable LK_ORA_NICE to 1 to prevent connection failures from causing a quickCheck failure followed by a local recovery attempt.
122575 ERROR Usage: %s %s
122576 ERROR Usage: %s %s
122577 ERROR Usage: %s %s
122578 ERROR Usage: %s %s
122579 ERROR Usage: %s %s
122580 ERROR Usage: %s %s
122581 ERROR Usage: %s %s
122582 ERROR Usage: %s %s
122583 ERROR Usage: %s %s
122584 ERROR Usage: %s %s
122585 ERROR Usage: %s %s
122586 ERROR Usage: %s %s
122587 ERROR Usage: %s %s
122588 ERROR Usage: %s %s
122590 ERROR Usage: %s %s
122591 ERROR Usage: %s %s
122592 ERROR Usage: %s %s
122593 ERROR Usage: %s %s
122594 ERROR Usage: %s %s
122595 ERROR Usage: %s %s
122596 ERROR Usage: %s %s
122597 ERROR Failed to create object instance for Oracle on "%s".

Cause: There was an unexpected error creating an internal representation of the Oracle instance being protected during pre-extend checking.

Action: Check the adjacent log messages for further details and related messages. Correct any reported errors
before retrying the pre-extend.
122598 ERROR Failed to create object instance for Oracle on "%s".

Cause: There was an unexpected error creating an internal representation of the Oracle instance being created while attempting to determine the validity of the Oracle home directory.

Action: Check the adjacent log messages for further details and related messages. Correct any reported errors
before retrying the "create."
122599 ERROR Failed to create object instance for Oracle on "%s".

Cause: There was an unexpected error creating an internal representation of the Oracle instance being protected while attempting to look up the Oracle user on the template system.

Action: Check the adjacent log messages for further details and related messages. Correct any reported errors
before retrying the extend.
122600 ERROR Failed to create object instance for Oracle on "%s".

Cause: There was an unexpected error creating an internal representation of the Oracle instance being protected while attempting to display the resource properties.

Action: Check the adjacent log messages for further details and related messages. Correct any reported errors before retrying the display of the resource properties.
122601 ERROR Failed to create object instance for Oracle on "%s".

Cause: There was an unexpected error creating an internal representation of the Oracle instance being protected while attempting to check for valid database authorization.

Action: Check the adjacent log messages for further details and related messages. Correct any reported errors before retrying the command.
122603 ERROR Failed to create object instance for Oracle on "%s".

Cause: There was an unexpected error creating an internal representation of the Oracle instance being protected while attempting to perform health checks on the Oracle resource instance.

Action: Check that correct arguments were passed to the quickCheck command and also check the adjacent log messages for further details and related messages. Correct any reported errors before retrying the restore.
122604 ERROR Failed to create object instance for Oracle on "%s".

Cause: There was an unexpected error creating an internal representation of the Oracle instance being protected while attempting to perform a local recovery on the Oracle resource instance.

Action: Check that correct arguments were passed to the "recover" command, and also check the adjacent log messages for further details and related messages. Correct any reported errors before retrying the recover.
122606 ERROR The Oracle database "%s" is not running or no open connections are available on "%s".

Cause: The database instance {sid} was not running or connections to the database are not available via the credentials provided.

Action: The database instance {sid} must be started on {server} and the proper credentials must be provided for the completion of the selected operation.
122607 ERROR The Oracle database "%s" is not running or no open connections are available on "%s".

Cause: The database instance {sid} was not running or connections to the database are not available via the credentials provided.

Action: The database instance {sid} must be started on {server} and the proper credentials must be provided for the completion of the selected operation.
122608 ERROR Failed to create object instance for Oracle on "%s".

Cause: The "remove" operation failed to create the resource object instance required to take the Oracle resource Out of Service.

Action: Check that correct arguments were passed to the "remove" command and also check the adjacent log messages for further details and related messages. Correct any reported errors before retrying the restore.
122609 ERROR Failed to create object instance for Oracle on "%s".

Cause: The "restore" operation failed to create the resource object instance required to put the Oracle resource In Service.

Action: Check that correct arguments were passed to the "restore" command and also check the adjacent log messages for further details and related messages. Correct any reported errors before retrying the "restore."
122610 ERROR Unable to "%s" on "%s" during resource create.

Cause: The Oracle Application Recovery Kit was unable to create the administrative lock using the "getlocks" command during resource creation.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors before retrying the create.
122611 ERROR %s

Cause: The requested dependency creation between the parent Oracle resource and the child File System resource failed.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors before retrying the create operation.
122612 ERROR %s

Cause: The requested dependency creation between the parent Oracle resource and the child Raw resource failed.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors before retrying the create operation.
122613 ERROR %s

Cause: The requested dependency creation between the parent Oracle resource and the child Raw resource failed.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors before retrying the create operation.
122614 ERROR %s

Cause: The requested dependency creation between the parent Oracle resource and the child Listener resource failed.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors before retrying the create operation.
122616 ERROR %s

Cause: The requested start up or shutdown of the Oracle database failed.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors before retrying the "restore" or "remove" operation.
122618 ERROR Dependency creation between Oracle database "%s (%s)" and the dependent resource "%s" on "%s" failed. Reason

Cause: LifeKeeper was unable to create a dependency between the database resource {tag} and the necessary child resource {childtag}.

Action: Check adjacent log messages for further details and related messages. Once any problems have been corrected, it may be possible to create the dependency between {tag} and {childtag} manually.
122619 ERROR Dependency creation between Oracle database "%s (%s)" and the dependent resource "%s" on "%s" failed. Reason

Cause: LifeKeeper was unable to create a dependency between the database resource {tag} and the necessary child resource {childtag}.

Action: Check adjacent log messages for further details and related messages. Once any problems have been corrected, it may be possible to create the dependency between {tag} and {childtag} manually.
122620 ERROR The tag "%s" on "%s" is not an Oracle instance or it does not exist.
122621 ERROR The tag "%s" on "%s" is not an Oracle instance or it does not exist.
122622 ERROR The tag "%s" on "%s" is not an Oracle instance or it does not exist.
122623 ERROR The tag "%s" on "%s" is not an Oracle instance or it does not exist.
122625 ERROR Unable to find the Oracle executable "%s" on "%s".

Cause: The quickCheck process was unable to find the Oracle executable "sqlplus."

Action: Check the Oracle configuration and also check adjacent log messages for further details and related messages. Correct any reported problems.
122626 ERROR Unable to find the Oracle executable "%s" on "%s".

Cause: The remove process was unable to find the Oracle executable "sqlplus."

Action: Check the Oracle configuration and also check adjacent log messages for further details and related messages. Correct any reported problems.
122627 ERROR Unable to find the Oracle executable "%s" on "%s".

Cause: The restore process was unable to find the Oracle executable "sqlplus."

Action: Check the Oracle configuration and also check adjacent log messages for further details and related messages. Correct any reported problems.
122628 ERROR Unable to find the Oracle executable "%s" on "%s".

Cause: The recover process was unable to find the Oracle executable "sqlplus."

Action: Check the Oracle configuration and also check adjacent log messages for further details and related messages. Correct any reported problems.
122632 ERROR Oracle SID mismatch. The instance SID "%s" does not match the SID "%s" specified for the command.

Cause: During a remove, the resource instance {sid} passed to the remove process does not match internal resource instance information for the {sid}.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors.
122633 ERROR Oracle SID mismatch. The instance SID "%s" does not match the SID "%s" specified for the command.

Cause: During a restore, the resource instance {sid} passed to restore does not match internal resource instance information for the {sid}.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors.
122634 ERROR Oracle SID mismatch. The instance SID "%s" does not match the SID "%s" specified for the command.

Cause: During resource recovery, the resource instance {sid} passed to recovery does not match internal resource instance information for the {sid}.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors.
122636 ERROR END failed hierarchy "%s" of resource "%s" on server "%s" with return value of %d

Cause: The create of the Oracle resource hierarchy {tag} failed on {server}.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors.
122638 ERROR END failed %s of "%s" on server "%s" due to a "%s" signal

Cause: The create action for the Oracle database resource {tag} on server {server} failed. The signal {sig} was received by the create process.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
122640 ERROR Error creating resource "%s" on server "%s"

Cause: An unexpected error occurred attempting to create the Oracle resource instance {tag} on {server}.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors.
122641 ERROR Error creating resource "%s" on server "%s"

Cause: An unexpected error occurred attempting to create the Oracle resource instance {tag} on {server}.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors.
122642 ERROR Error creating resource "%s" on server "%s"

Cause: An unexpected error occurred attempting to create the Oracle resource instance {tag} on {server}.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors.
122643 ERROR Cannot extend resource "%s" to server "%s"

Cause: LifeKeeper was unable to extend the resource {resource} on {server}.

Action: Check the adjacent log messages for further details and related messages. Correct any reported errors.
122644 ERROR Error getting resource information for resource "%s" on server "%s"

Cause: An unexpected error occurred attempting to retrieve resource instance information for {tag} on {server}.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors and retry the extend.
122645 ERROR Cannot access canextend script "%s" on server "%s"

Cause: LifeKeeper was unable to run pre-extend checks because it was unable to find the "canextend" script on {server} for a dependent child resource.

Action: Check your LifeKeeper configuration.
122646 ERROR Error getting resource information for resource "%s" on server "%s"

Cause: An unexpected error occurred attempting to retrieve resource instance information for {tag} on {server}.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors and retry the extend.
122647 ERROR Cannot extend resource "%s" to server "%s"

Cause: LifeKeeper was unable to extend the resource {resource} on {server}.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors.
122648 ERROR Resource with either matching tag "%s" or id "%s" already exists on server "%s" for App "%s" and Type "%s"

Cause: During the database resource extension, a resource instance was found using the same {tag} and/or {id} but with a different resource application and type.

Action: Resource IDs must be unique. The resource instance with the ID matching the Oracle resource instance must be removed.
122649 ERROR Error creating resource "%s" on server "%s"

Cause: An unexpected error occurred attempting to create the Oracle resource instance {tag} on {server}.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors.
122650 ERROR Cannot access extend script "%s" on server "%s"

Cause: The request to extend the database resource {resource} to {server} failed because it was unable to the find the script {extend} on {server} for a dependent child resource.

Action: Check your LifeKeeper configuration.
122651 ERROR Cannot extend resource "%s" to server "%s"

Cause: The request to extend the database resouce {resource} to {server} failed because of an error attempting to extend a dependent child resource.

Action: Check the adjacent log messages for further details and related messages. Correct any reported errors.
122654 ERROR END failed %s of "%s" on server "%s" due to a "%s" signal

Cause: The health check for the database {sid} was terminated because the quickCheck process received a signal. This is most likely caused by the quickCheck process requiring more time to complete than was allotted.

Action: The health check time for an Oracle resource is controlled by the tunable value ORACLE_QUICKCHECK_TIMEOUT. Set it to a value greater than 45 seconds to allow more time for the health check process to complete.
122655 ERROR END failed %s of "%s" on server "%s" due to a "%s" signal

Cause: The request to take database {sid} "Out of Service" was terminated because the remove process received a signal. This is most likely caused by the remove process requiring more time to complete than was allotted.

Action: The remove time for an Oracle resource is controlled by the tunable value ORACLE_REMOVE_TIMEOUT. Set the tunable to a value greater than 240 seconds to allow more time for the remove process to complete.
122659 ERROR END failed %s of "%s" on server "%s" due to a "%s" signal

Cause: The request to place database {sid} "In Service" was terminated because the restore process received a signal. This is most likely caused by the restore process requiring more time to complete than was allotted.

Action: The restore time for an Oracle resource is controlled by the tunable value ORACLE_RESTORE_TIMEOUT. Set the tunable to a value greater than 240 seconds to allow more time for the restore process to complete.
122663 ERROR END failed %s of "%s" on server "%s" due to a "%s" signal

Cause: The recovery of the failed database was terminated because the recovery process received a signal. This is most likely caused by the recovery process requiring more time to complete than was allotted.

Action: The recovery time for an Oracle resource is controlled by the tunable values ORACLE_RESTORE_TIMEOUT and ORACLE_REMOVE_TIMEOUT. Set one or both of these to a value greater than 240 seconds to allow more time for a recovery to complete.
122670 ERROR Update of "%s" sid "%s" on "%s" failed. Reason: "%s" "%s" failed: "%s".

Cause: An unexpected error occurred while attempting to update the oratab entry for the database {sid}. The error occurred while attempting to open the temporary file used in the update process.

Action: The oratab file entry for {sid} will need to be updated manually to turn off the automatic start up of the database at system boot.
122671 ERROR Update of "%s" sid "%s" on "%s" failed. Reason: "%s" "%s" failed: "%s".

Cause: An unexpected error occurred while attempting to update the oratab entry for the database {sid}. The error occurred while attempting to close the temporary file used in the update process.

Action: The oratab file entry for {sid} will need to be updated manually to turn off the automatic start up of the database at system boot.
122672 ERROR Update of "%s" sid "%s" on "%s" failed. Reason: "%s" "%s" failed: "%s".

Cause: An unexpected error occurred while attempting to update the oratab entry for the database {sid}. The error occurred while attempting to rename the temporary file back to oratab.

Action: The oratab file entry for {sid} will need to be updated manually to turn off the automatic start up of the database at system boot.
122673 ERROR Unable to log messages queued while running as oracle user %s on %s. Reason: $!

Cause: An unexpected error {reason} occurred while attempting to add messages to the log file. These messages were generated while running as the Oracle user.

Action: Review the reason for the failure and take corrective action.
122674 ERROR Unable to open %s Reason: %s.

Cause: An unexpected error occurred while attempting to open a connection to the Oracle database and run the database {cmd}.

Action: Check adjacent log messages for further details and related messages. Additionally, check the Oracle log (alert.log) and related trace logs (*.trc) for additional information and correct any reported problems.
122680 ERROR Usage: %s %s
122681 ERROR Failed to create object instance for Oracle on "%s".
122682 ERROR Unable to find the Oracle executable "%s" on "%s".
122683 ERROR Backup node %s is unreachable; abort username/password changes.
122684 ERROR The restore of %s has timed out on server %s. The default TIMEOUT is 300 seconds. To increase the TIMEOUT, set ORACLE_RESTORE_TIMEOUT in /etc/default/LifeKeeper.
122685 ERROR The remove of %s has timed out on server %s. The default TIMEOUT is 300 seconds. To increase the TIMEOUT, set ORACLE_REMOVE_TIMEOUT in /etc/default/LifeKeeper.
122686 ERROR The quickCheck of %s has timed out on server %s. The default TIMEOUT is 45 seconds. To increase the TIMEOUT, set ORACLE_QUICKCHECK_TIMEOUT in /etc/default/LifeKeeper.
123006 FATAL Unknown version %s of IP address

Cause: The IP address does not appear to be valid for either IPv4 or IPv6.

Action: Provide a valid IP address.
123008 ERROR No pinglist found for %s.

Cause: Problem while opening the pinglist for this IP address.

Action: Make sure you have provided a pinglist for this IP address.
123009 ERROR List ping test failed for virtual IP %s

Cause: No response was received from any of the addresses in the ping list.

Action: Check network connectivity of this node and the systems on which the IPs in the ping list reside.
123013 ERROR Link check failed for virtual IP %s on interface %s.

Cause: The requested interface is showing ‘NO-CARRIER’ indicating that no link is present on the phycial layer connection.

Action: Check the physical connections for the interface and bring the physical layer link up.
123015 ERROR Link check failed for virtual IP %s on interface %s.

Cause: The requested interface is a bonded interface, and one of the slaves is showing ‘NO-CARRIER’ indicating that no link is present on the phycial layer connection.

Action: Check the physical connections for the slave interface and bring the physical layer link up.
123024 ERROR IP address seems to still exist somewhere else.

Cause: The IP address appears to be in use elsewhere on the network.

Action: Either select a different IP address to use or locate and disable the current use of this IP address.
123037 ERROR must specify machine name containing primary hierarchy

Cause: Not enough arguments were provided to creIPhier.

Action: Supply all of the needed arguments to creIPhier.
123038 ERROR must specify IP resource name

Cause: Not enough arguments were passed to creIPhier.

Action: Supply all of the needed arguments to creIPhier.
123039 ERROR must specify primary IP Resource tag

Cause: The argument specifying the primary IP Resource tag was missing from the "creIPhier" command.

Action: Supply all of the needed arguments.
123042 ERROR An unknown error has occurred in utility validmask on machine %s.

Cause: There was an unexpected error running the "validmask" utility.

Action: Check adjacent log messages for additional details.
123045 ERROR An unknown error has occurred in utility getlocks.

Cause: There was an unexpected error running the "getlocks" utility.

Action: Check adjacent log messages for additional details.
123053 ERROR Cannot resolve hostname %s

Cause: A hostname was provided for the IP address, but the system was unable to resolve the name to an IP address.

Action: Check the correctness of the hostname and verify that name resolution (DNS or /etc/hosts) is working correctly and returns the IP for the hostname.
123055 ERROR An unknown error has occurred in utility %s on machine %s.

Cause: There was a failure while creating the IP resource.

Action: Check the logs for related errors and try to resolve the reported problem.

123056 ERROR create ip hierarchy failure: perform_action failed

Cause: Unexpected error trying to restore the IP address during creation.

Action: Check adjacent log messages for additional details.
123059 ERROR Resource already exists on machine %s

Cause: Attempted to create an IP address that already exists.

Action: Reuse the existing resource or manually remove the IP address if it exists or use a different IP address.
123060 ERROR ins_create failed on machine %s

Cause: An unexpected failure occurred while creating an IP resource.

Action: Check adjacent log messages for further details.
123064 ERROR An unknown error has occurred in utility %s on machine %s.

Cause: There was a failure while creating a dependency for the IP resource.

Action: Check the logs for related errors and try to resolve the reported problem.
123066 ERROR An error occurred during creation of LifeKeeper application=comm on %s.

Cause: A failure occured while calling "app_create."

Action: Check the logs for related errors and try to resolve the reported problem.
123068 ERROR An error occurred during creation of LifeKeeper resource type=ip on %s.

Cause: A failure occured while calling "typ_create."

Action: Check the logs for related errors and try to resolve the reported problem.
123090 ERROR virtual IP %s on interface %s is not configured
123091 ERROR the link for interface %s is down

Cause: The requested interface is showing ‘NO-CARRIER’ indicating that no link is present on the phycial layer connection.

Action: Check the physical connections for the interface and bring the physical layer link up.
123093 ERROR the ping list check failed

Cause: No response was received from any of the addresses in the ping list.

Action: Check network connectivity of this node and the systems on which the IPs in the ping list reside.
123095 ERROR broadcast ping failed

Cause: No replies were received from a broadcast ping.

Action: Verify that at least one host on the subnet will respond to broadcast pings. Verify that virtual IP is on the correct network interface. Consider using a pinglist instead of a broadcast ping.
123096 ERROR $msg);

Cause: The broadcast ping used to determine the viability of the virtual IP failed.

Action: Please ensure that the ping list for this resource is properly configured in the properties panel or that broadcast ping checking is disabled by adding NOBCASTPING=1 to the /etc/default/LifeKeeper configuration file.
123097 ERROR exec_list_ping(): broadcast ping failed.

Cause: The broadcast ping used to determine the viability of the virtual IP failed.

Action: Ensure that the ping list for this resource is properly configured in the properties panel or that broadcast ping checking is disabled by adding NOBCASTPING=1 to the /etc/default/LifeKeeper configuration file.
123299 ERROR Unable to open %s. Reason %s
124004 FATAL resource tag name not specified

Cause: Invalid arguments were specified for the "quickCheck" operation.

Action: Ensure that the correct arguments are passed.
124005 FATAL resource id not specified

Cause: Invalid arguments were specified for the "quickCheck" operation.

Action: Ensure that the correct arguments are passed.
124007 FATAL Failed to get resource information

Cause: The filesystem resource’s info field does not contain the correct information.

Action: Put the correct information in the resource’s info field or restore the system from a recent "lkbackup" to restore the original info field.
124008 ERROR getId failed

Cause: The filesystem resource could not find the underlying disk device.

Action: Check adjacent log messages for further details. Verify that the resource hierarchy is valid and that all required storage kits are installed.
124009 ERROR LifeKeeper protected filesystem is in service but quickCheck detects the following error:

Cause: The filesystem kit has found something wrong with the resource.

Action: Check the messages immediately following this one for more details.
124010 ERROR \"$id\" is not mounted

Cause: The filesystem resource is no longer mounted.

Action: No action is required. Allow local recovery to remount the resource.
124011 ERROR \"$id\" is mounted but with the incorrect mount options (current mount option list: $mntopts, expected mount option list: $infoopts)

Cause: The filesystem resource is mounted incorrectly.

Action: No action is required. Allow local recovery to remount the resource.
124012 ERROR \"$id\" is mounted but on the wrong device (current mount device: $tmpdev, expected mount device: $dev)

Cause: The filesystem resource has the wrong device mounted.

Action: No action is required. Allow local recovery to remount the resource.
124015 ERROR LifeKeeper protected filesystem \"$tag\" ($id) is $percent% full ($blocksfree free blocks).

Cause: The filesystem is getting full.

Action: Remove or migrate data from the filesystem.
124016 WARN LifeKeeper protected filesystem \"$tag\" ($id) is $percent% full ($blocksfree free blocks).

Cause: The filesystem is getting full.

Action: Remove or migrate data from the filesystem.
124020 FATAL cannot find device information for filesystem $id

Cause: The filesystem resource could not find the underlying disk device.

Action: Check adjacent log messages for further details. Verify that the resource hierarchy is valid and that all required storage kits are installed.
124029 ERROR Failed to find child resource.

Cause: The filesystem resource could not determine its underlying disk resource.

Action: Ensure that the resource hierarchy is correct.
124032 FATAL Script has hung. Exiting.

Cause: Processes had files open on a mounted filesystem that needed to be unmounted. Killing those processes has taken too long.

Action: If this error continues, try to temporarily stop all software that may be using the mount point to allow it to be unmounted. If the filesystem still cannot be unmounted, contact Support.
124042 ERROR file system $fs failed unmount; will try again

Cause: Processes had files open on a mounted filesystem that needed to be unmounted. It can take multiple attempts to clear those processes.

Action: No action is required. Allow the process to continue.
124046 ERROR file system $fsname failed unmount

Cause: A filesystem could not be unmounted.

Action: If this error continues, try to temporarily stop all software that may be using the mount point to allow it to be unmounted. If the filesystem still cannot be unmounted, contact Support.
124049 ERROR Local recovery of resource has failed (err=$err)

Cause: A filesystem resource has a problem that cannot be repaired locally.

Action: No action is required. Allow the resource to be failed over to another system.
124051 WARN getId failed, try count : $cnt/$try
124103 ERROR $ERRMSG Script was terminated for unknown reason

Cause: This message should not occur under normal circumstances.

Action: Check adjacent log messages for further details.

124104 ERROR $ERRMSG Required template machine name is null

Cause: Invalid arguments were specified for the canextend operation.

Action: Ensure that the arguments are correct. If this error happens during normal operation, please contact Support.
124105 ERROR $ERRMSG Required template resource tag name is null

Cause: Invalid arguments were specified for the canextend operation.

Action: Ensure that the arguments are correct. If this error happens during normal operation, please contact Support.
124106 ERROR $ERRMSG Unable to access template resource \"$TemplateTagName\

Cause: The resource’s underlying disk information cannot be determined.

Action: Ensure the hierarchy is correct on the template system before extending.
124107 ERROR $ERRMSG Resource \"$TemplateTagName\" must have one and only one device resource dependency

Cause: The resource has too many underlying devices in the hierarchy.

Action: Ensure the hierarchy is correct on the template system before extending.
124108 ERROR $ERRMSG Unable to access template resource \"$TemplateTagName\

Cause: The resource cannot be found on the template system.

Action: Ensure the hierarchy is correct on the template system before extending.
124109 ERROR $ERRMSG Can not access canextend for scsi/$DeviceResType resources on machine \"$TargetSysName\

Cause: The target system is missing some required components.

Action: Ensure that the target system has all the correct kits installed and licensed.
124110 ERROR $ERRMSG Either filesystem \"$TemplateLKId\" is not mounted on \"$TemplateSysName\" or filesystem is not shareable with \"$TargetSysName\

Cause: The filesystem isn’t in service on the template system or doesn’t meet the requirements for extending to the target system.

Action: Make sure the resource is in service on the template system and review the product documentation regarding the requirements for extending filesystems.
124111 ERROR $ERRMSG File system type \"${FSType}\" is not supported by the kernel currently running on \"${TargetSysName}\

Cause: The filesystem’s type cannot be mounted on the target system due to lack of kernel support.

Action: Ensure that the target system has all its kernel modules configured correctly before extending the resource.
124112 ERROR must specify machine name containing primary hierarchy

Cause: Invalid arguments were specified for the creFShier operation.

Action: If this error happens during normal operation, please contact Support.
124113 ERROR must specify primary ROOT tag

Cause: Invalid arguments were specified for the creFShier operation.

Action: If this error happens during normal operation, please contact Support.
124114 ERROR must specify primary mount point

Cause: Invalid arguments were specified for the creFShier operation.

Action: If this error happens during normal operation, please contact Support.
124115 ERROR must specify primary switchback type

Cause: Invalid arguments were specified for the creFShier operation.

Action: If this error happens during normal operation, please contact Support.
124118 ERROR dep_remove failure on machine \""$PRIMACH"\" for parent \"$PRITAG\" and child \"$DEVTAG.\

Cause: Cleanup after a dependency creation failed.

Action: Check adjacent log messages for further details.
124119 ERROR ins_remove failure on machine \""$PRIMACH"\" for \"$PRITAG.\

Cause: Cleanup after an instance creation failed.

Action: Check adjacent log messages for further details.
124121 ERROR ins_remove failure on machine \""$PRIMACH"\

Cause: Cleanup after a resource creation failed.

Action: Check adjacent log messages for further details.
124122 ERROR $ERRMSG Script was terminated for unknown reason

Cause: This message should not occur under normal circumstances.

Action: Check adjacent log messages for further details.
124123 ERROR $ERRMSG Required template machine name is null

Cause: Invalid arguments were specified for the depstoextend operation.

Action: Ensure the script is called correctly. If this error happens during normal operation, please contact Support.
124124 ERROR $ERRMSG Required template resource tag name is null

Cause: Invalid arguments were specified for the depstoextend operation.

Action: Ensure the script is called correctly. If this error happens during normal operation, please contact Support.
124125 ERROR $ERRMSG Unable to access template resource \"$TemplateTagName\

Cause: The resource was unable to locate its underlying disk resource.

Action: Ensure the hierarchy and all dependencies are correct before extending.
124126 ERROR unextmgr failure on machine \""$PRIMACH"\

Cause: The cleanup, after a failed resource extend operation, failed.

Action: Manually clean up any remaining resources and check adjacent log messages for further details.
124128 ERROR unextmgr failure on machine \""$PRIMACH"\" for \"$PRITAG.\

Cause: The cleanup, after a failed resource extend operation, failed.

Action: Manually clean up any remaining resources and check adjacent log messages for further details.
124129 ERROR $ERRMSG Script was terminated for unknown reason

Cause: This message should not occur under normal circumstances.

Action: Look for additional log messages for more details.
124130 ERROR $ERRMSG Required template machine name is null

Cause: Invalid arguments were specified for the extend operation.

Action: Ensure the script is called correctly. If this error happens during normal operation, please contact Support.
124131 ERROR $ERRMSG Required template resource tag name is null

Cause: Invalid arguments were specified for the extend operation.

Action: Ensure the script is called correctly. If this error happens during normal operation, please contact Support.
124132 ERROR $ERRMSG Required target mount point is null

Cause: Invalid arguments were specified for the extend operation.

Action: Ensure the script is called correctly. If this error happens during normal operation, please contact Support.
124133 ERROR $ERRMSG Unable to access template resource \"$TemplateTagName\

Cause: The tag being extended doesn’t exist on the template system.

Action: Ensure that the hierarchy is correct on the template system before extending.
124134 ERROR $ERRMSG Detected conflict in expected tag name \"$TargetTagName\" on target machine.

Cause: A resource already exists on the target system with the same tag as the resource being extended.

Action: Recreate one of the conflicting resources with a different tag.
124135 ERROR $ERRMSG Resource \"$TemplateTagName\" does not have required device resource dependency or unable to access this resource on template machine.

Cause: The resource or its underlying disk resource cannot be found on the template system.

Action: Ensure that the hierarchy is correct on the template system before extending.
124136 ERROR $ERRMSG Resource \"$TemplateTagName\" must have one and only one device resource dependency

Cause: The resource has multiple underlying devices in the hierarchy on the template system.

Action: Ensure the hierarchy is correct before extending and that the filesystem resource only depends on a single disk resource.
124137 ERROR $ERRMSG Can not access extend for scsi/$DeviceResType resources on machine \"$TargetSysName\

Cause: The files required to support the given storage type aren’t available on the target system.

Action: Ensure that the required kits are installed on the target system and licensed.
124138 ERROR $ERRMSG Unable to access target device resource \"$DeviceTagName\" on machine \"$TargetSysName\

Cause: The required underlying disk resource doesn’t exist on the target system.

Action: Check adjacent log messages for further details and ensure that the target system is properly configured for hosting the resources being extended.
124139 ERROR $ERRMSG Unable to access template \"/etc/mtab\" file

Cause: The target system cannot read the template system’s /etc/mtab file.

Action: Check adjacent log messages for further details. Ensure that the /etc/mtab file exists on the template system.
124140 ERROR $ERRMSG Unable to find mount point entry \"$TemplateLKId\" in template \"/etc/mtab\" file. Is template resource in-service?

Cause: The resource doesn’t appear to be mounted on the template system.

Action: Make sure the resource is in service before extending.
124141 ERROR $ERRMSG Unable to find mount point \"$TemplateLKId\" mode on template machine

Cause: The details of the mount point on the template system cannot be determined.

Action: Ensure that the resource is in service and accessible on the template system before extending.
124142 ERROR $ERRMSG Unable to create or access mount point \"$TargetLKId\" on target machine

Cause: The mount point could not be created on the target system.

Action: Ensure that the mount point’s parent directory exists and is accessible on the target system.
124143 ERROR $ERRMSG Two or more conflicting entries found in /etc/fstab on \"$TargetSysName\

Cause: The device or mount point appears to be mounted more than once on the target system.

Action: Ensure that the mount point is not mounted on the target system before extending.
124144 ERROR $ERRMSG Failed to create resource instance on \"$TargetSysName\

Cause: The resource creation on the target system failed.

Action: Check adjacent log messages for further details. Make sure to check the logs on the target server.
124145 ERROR $ERRMSG Failed to set resource instance state for \"$TargetTagName\" on \"$TargetSysName\

Cause: The source state could not be changed to OSU on the target system.

Action: Check adjacent log messages for further details.
124146 ERROR must specify machine name containing primary hierarchy

Cause: Invalid arguments were specified for the filesyshier operation.

Action: Ensure the script is called correctly. If this error happens during normal operation, please contact Support.
124147 ERROR must specify primary mount point

Cause: Invalid arguments were specified for the filesyshier operation.

Action: Ensure the script is called correctly. If this error happens during normal operation, please contact Support.
124149 ERROR create file system hierarchy failure

Cause: The process of finding the resource instance failed.

Action: Check adjacent log messages for further details.
124150 ERROR create file system hierarchy failure

Cause: The system failed to read the /etc/mtab file.

Action: Check adjacent log messages for further details.
124151 ERROR create file system hierarchy failure

Cause: The mount point could not be found in the /etc/mtab file.

Action: Check adjacent log messages for further details.
124152 ERROR create file system hierarchy failure

Cause: The underlying disk resource could not be found.

Action: Check adjacent log messages for further details.
124153 ERROR create file system hierarchy failure

Cause: Creating the filesystem resource failed.

Action: Check adjacent log messages for further details.
124154 ERROR create file system hierarchy failure

Cause: The info field for the resource could not be updated.

Action: Check adjacent log messages for further details.
124155 ERROR create file system hierarchy failure

Cause: The switchback strategy could not be set on the resource.

Action: Check adjacent log messages for further details.
124157 ERROR create file system hierarchy failure \(conflicting entries in /etc/fstab\)

Cause: The mount point could not be removed from the /etc/fstab file.

Action: Check adjacent log messages for further details.
124160 ERROR Unknown error in script filesysins, err=$err

Cause: This message should not occur under normal circumstances.

Action: Check adjacent log messages for further details.
124161 ERROR create filesys instance – existid – failure

Cause: This message should not occur under normal circumstances.

Action: Check adjacent log messages for further details.
124163 ERROR create filesys instance – ins_list – failure

Cause: Checking for an existing resource failed.

Action: Check adjacent log messages for further details.
124164 ERROR create filesys instance – newtag – failure

Cause: The system failed to generate a suggested tag for the resource.

Action: If this error happens during normal operation, contact Support.
124168 ERROR create filesys instance – ins_create – failure

Cause: The filesystem resource could not be created.

Action: Check adjacent log messages for further details.
124169 ERROR filesys instance – ins_setstate – failure

Cause: The new filesystem resource’s state could not be initialized.

Action: Check adjacent log messages for further details.
124173 ERROR create filesys instance – dep_create – failure

Cause: The resource’s dependency relationship with its underlying disk could not be created.

Action: Check adjacent log messages for further details.
124174 ERROR machine not specified

Cause: Invalid arguments were specified for the rmenu_mp operation.

Action: Ensure the script is called correctly. If this error happens during normal operation, please contact Support.
124175 ERROR mount point not specified

Cause: Invalid arguments were specified for the rmenu_mp operation.

Action: Ensure the script is called correctly. If this error happens during normal operation, please contact Support.
124177 ERROR unexpected multiple matches found

Cause: One or more systems show a filesystem or mount point used more than once.

Action: Verify filesystem devices and mount points and ensure that filesystems are only mounted once. Look for additional log messages for more details.
124178 ERROR machine name not specified

Cause: Invalid arguments were specified for the rmenump operation.

Action: Ensure the script is called correctly. If this error happens during normal operation, please contact Support.
124180 ERROR must specify filesystem type

Cause: Invalid arguments were specified for the validfstype operation.

Action: Ensure the script is called correctly. If this error happens during normal operation, please contact Support.
124181 ERROR mount point not specified

Cause: Invalid arguments were specified for the validmp operation.

Action: Ensure the script is called correctly. If this error happens during normal operation, please contact Support.
124182 ERROR The mount point $MP is not an absolute path

Cause: A mount point was specified that isn’t an absolute path (doesn’t start with a ‘/’).

Action: Specify a mount point as an absolute path starting with a ‘/’.
124183 ERROR $MP is already mounted on $MACH

Cause: The requested mount point is already in use on the system.

Action: Specify a mount point that isn’t in use or unmount it before retrying the operation.
124184 ERROR The mount point $MP is already protected by LifeKeeper on $MACH

Cause: The system is already protecting the specified mount point.

Action: Choose a different mount point that isn’t already being protected.
124185 ERROR The mount point $MP is not a directory on $MACH

Cause: The mount point refers to a non-directory such as a regular file.

Action: Choose a mount point that refers to a directory.
124186 ERROR The mount point directory $MP is not empty on $MACH

Cause: The specified mount point refers to a directory that isn’t empty.

Action: Choose a mount point that is empty or remove the contents of the specified directory before retrying the operation.
124187 ERROR server name not specified

Cause: Invalid arguments were specified for the valuepmp operation.

Action: Ensure the script is called correctly. If this error happens during normal operation, please contact Support.
124188 ERROR There are no mount points on server $MACH

Cause: There are no possible mount points for filesystem resource on the server.

Action: Check adjacent log messages for further details.
124194 WARN Please correct conflicting \"/etc/fstab\" entries on server $UNAME for: $FSDEV, $FSNAME

Cause: After deleting a filesystem resource, some entries in /etc/fstab need to me manually cleaned up.

Action: Manually clean up the /etc/fstab file.
124195 ERROR getchildinfo found no $OKAPP child for $PTAG

Cause: The system could not find a child resource in the hierarchy.

Action: Check adjacent log messages for further details and ensure that the hierarchy is correct before retrying the operation.
124196 ERROR enablequotas – quotacheck may have failed for $FS_NAME

Cause: The quota operation failed.

Action: Check adjacent log messages for further details in both the lifekeeper log and in /var/log/messages.
124198 ERROR enablequotas – quotaon failed to turn on quotas for $FS_NAME, reason

Cause: The quota operation failed.

Action: Check adjacent log messages for further details in both the lifekeeper log and /var/log/messages.
124200 ERROR The device node $dev was not found or did not appear in the udev create time limit of $delay seconds

Cause: A device node (/dev/…) was not created by udev. This may indicate an issue with the storage or the server’s connection to the storage.

Action: Check adjacent log messages for further details in both the lifekeeper log and in /var/log/messages.
124201 WARN Device $device not found. Will retry wait to see if it appears.

Cause: This can happen under normal conditions while udev creates device node entries for storage. This message should not happen repeatedly.

Action: Check adjacent log messages for further details in both the lifekeeper log and in /var/log/messages.
124202 ERROR Command \"$commandwithargs\" failed. Retrying ….

Cause: The given command failed but may have failed temporarily. This failure may happen during normal operations but should not keep failing.

Action: Check adjacent log messages for further details if this message continues.
124204 WARN cannot make file system $FSNAME mount point

Cause: The mount point directory could not be created.

Action: Ensure that the mount point can be created. This may be due to filesystem permissions, mount options, etc.
124207 ERROR \"fsck\"ing file system $FSNAME failed, trying alternative superblock

Cause: This message indicates that the typical filesystem check failed. This message may be ok for ext2 filesystems or other filesystems where an alternative superblock location is used.

Action: Check adjacent log messages for further details.
124209 ERROR \"fsck\"ing file system $FSNAME with alternative superblock failed

Cause: This indicates that an ext2 filesystem (or other filesystem where an alternative superblock location is used) check failed with the alternative superblock location.

Action: Check adjacent log messages for further details and instructions on how to proceed.
124210 WARN POSSIBLE FILESYSTEM CORRUPTION ON $FSNAME ($FPNAME)

Cause: A filesystem was put in service or failed over when it was out of sync with its mirror source.

Action: Check adjacent log messages for further details and review the product documentation for information on how to bring the filesystem in service safely.
124211 ERROR Reason for fsck failure ($retval): $ret

Cause: This log message is part of a series of messages and gives the actual exit code from the fsck process.

Action: Check adjacent log messages for further details and instructions on how to proceed.
124212 ERROR \"fsck\" of file system $FSNAME failed

Cause: The check of the filesystem failed. This is usually due to the filesystem having corruption.

Action: Check adjacent log messages for further details. Review the product documentation for instructions on how to handle possible filesystem corruption.
124213 WARN POSSIBLE FILESYSTEM CORRUPTION ON $FSNAME ($FPNAME)

Cause: The system or user tried to bring into service a filesystem that may be corrupted. This can happen if a filesystem is switched or failed over when it was out of sync with its mirror source.

Action: Check adjacent log messages for further details and review the product documentation for instructions on how to bring the resource into service safely.
124214 ERROR Reason for fsck failure ($retval)

Cause: This message should follow a previous log message about a filesystem check failure and gives the process exit code of the fsck process.

Action: Check adjacent log messages for further details.
124218 ERROR File system $FSNAME was found to be already

Cause: This message is part of a series of messages.

Action: Check adjacent log messages for further details.
124219 ERROR mounted after initial mount attempt failed.

Cause: This message is part of a series of messages. This should not happen under normal circumstances but may not be fatal if the resource can be put in service.

Action: Check adjacent log messages for further details in both the lifekeeper log and in /var/log/messages.
124220 ERROR File system $FSNAME failed to mount.

Cause: The filesystem could not be mounted.

Action: Check adjacent log messages for further details.
124221 WARN Protected Filesystem $ID is full

Cause: The filesystem is full.

Action: Remove unused data from the filesystem or migrate to a larger filesystem.
124222 WARN Dependent Applications may be affected <>

Cause: This indicates that an operation on a resource is likely to cause operation on other resources based on the resource hierarchy.

Action: Make sure it’s acceptable for the indicated resources to be affected before continuing.
124223 ERROR Put \"$t\" Out-Of-Service Failed By Signal

Cause: This message should not occur under normal circumstances.

Action: Check adjacent log messages for further details.
124227 ERROR Put \"$i\" Out-Of-Service Failed

Cause: The operation failed.

Action: Check adjacent log messages for further details.
124230 ERROR Put \"$t\" In-Service Failed By Signal

Cause: This message should not occur under normal circumstances.

Action: Check adjacent log messages for further details.
124231 ERROR Put \"$t\" In-Service Failed

Cause: The operation failed.

Action: Check adjacent log messages for further details.
124234 ERROR Put \"$t\" In-Service Failed

Cause: The operation failed.

Action: Check adjacent log messages for further details.
125000 FATAL $dev cannot be protected with LifeKeeper
125001 FATAL failed to get ID for $dev
125003 FATAL ins_create failed
125004 FATAL ins_setstate failed
125016 ERROR failed to copy $devinfo to $classic (lk_cspec output:$output)
125017 ERROR Failed to open $classic. (lk_cspec output:$output) Please contact support\@us.sios.com for assistance in upgrading your cluster.
125022 ERROR $ins: ID update failed.
125041 ERROR Unable to open device pattern file $devpat
125042 ERROR Unable to open temporary file $devinfotmp for writing
125043 ERROR Unable to open SCSI device info file $devinfo
125100 ERROR Script was terminated for unknown reason
125101 ERROR Either TEMPLATESYS or TEMPLATETAG argument missing
125102 ERROR `printf ‘Template resource "%s" on server "%s" does not exist’ $TemplateTagName $TemplateSysName`

Cause: LifeKeeper was unable to find the resource {tag} on {server}.
125103 ERROR `printf ‘%s is not shareable with any machine.’ $DEV`

Cause: The device does not appear to be shared with any other systems.

Action: Verify that the device is accessible from all servers in the cluster. Ensure that all relevant storage drivers and software are installed and configured properly.
125104 ERROR `printf ‘Failed to create disk hierarchy for "%s" on "%s"’ $PRIMACH $DEV`

Cause: The creation of a resource to protect a physical disk failed.

Action: Check adjacent log messages for more details and try to resolve the reported problem.
125105 ERROR Script was terminated for unknown reason
125106 ERROR Either TEMPLATESYS or TEMPLATETAG argument missing
125107 ERROR `printf ‘Template resource "%s" on server "%s" does not exist’ $TemplateTagName $TemplateSysName`

Cause: LifeKeeper was unable to find the resource {tag} on {server}.
125108 ERROR getId failed which is needed for resource \"$TemplateTagName\
125109 ERROR `printf ‘Error creating resource on server "%s"’ $TargetSysName`
125110 ERROR `printf ‘Failed to set resource instance state on "%s".’ $TargetSysName`
125112 ERROR Script was terminated for unknown reason
125113 ERROR Either TEMPLATESYS or TEMPLATETAG argument missing
125114 ERROR `printf ‘Template resource "%s" on server "%s" does not exist’ $TemplateTagName $TemplateSysName`

Cause: LifeKeeper was unable to find the resource {tag} on {server}.
125115 ERROR `printf ‘Cannot access canextend script "%s" on server "%s"’ "scsi/disk" $TargetSysName`
125116 ERROR Script was terminated for unknown reason
125117 ERROR Either TEMPLATESYS or TEMPLATETAG argument missing
125118 ERROR Script was terminated for unknown reason
125119 ERROR Either TEMPLATESYS or TEMPLATETAG argument missing
125120 ERROR `printf ‘Template resource "%s" on server "%s" does not exist’ $TemplateTagName $TemplateSysName`

Cause: LifeKeeper was unable to find the resource {tag} on {server}.
125121 ERROR `printf ‘Error creating resource on server "%s"’ $TargetSysName`
125122 ERROR `printf ‘Failed to set resource instance state on "%s".’ $TargetSysName`
125123 ERROR `printf ‘Cannot access depstoextend script "%s" on server "%s"’ $depstoextend $TargetSysName`

Cause: LifeKeeper was unable to run pre-extend checks on the resource hierarchy because it was unable to find the script "DEPSTOEXTEND" on {server}.

Action: Check your LifeKeeper configuration.
125124 ERROR `printf ‘Device ID changed from "%s" to "%s". A child resource is expected but one does not exist.’ $TemplateLKId $TargetLKId`
125125 ERROR `printf ‘Cannot access extend script "%s" on server "%s"’ $childextend $TargetSysName`
125126 ERROR `printf ‘Template resource "%s" on server "%s" does not exist’ $ChildTag $TemplateSysName`

Cause: LifeKeeper was unable to find the resource {tag} on {server}.
125127 ERROR Script was terminated for unknown reason
125128 ERROR Either TEMPLATESYS or TEMPLATETAG argument missing
125129 ERROR `printf ‘Template resource "%s" on server "%s" does not exist’ $TemplateTagName $TemplateSysName`

Cause: LifeKeeper was unable to find the resource {tag} on {server}.
125130 ERROR `printf ‘Unable to find shared device on "%s" for "%s" on "%s".’ $TargetSysName $TemplateLKId $TemplateSysName`
125155 ERROR SCSI $DEV failed to lock.

Cause: There was a problem locking a SCSI device.

Action: Check adjacent log messages for more details and try to resolve the reported problem.
125164 ERROR SCSI $INFO failed to unlock.

Cause: There was a problem unlocking a SCSI device.

Action: Check adjacent log messages for more details and try to resolve the reported problem.
125174 ERROR partition information not defined for $DEV.
125175 ERROR device node $DEV does not exist
125176 ERROR create device hierarchy failure
125181 ERROR `printf ‘Template resource "%s" on server "%s" does not exist’ $TemplateTag $TemplateSysName`

Cause: LifeKeeper was unable to find the resource {tag} on {server}.
126105 ERROR script not specified – $PTH is a directory

Cause: The specified script path is a directory.

Action: Correct the path of the script.
126110 ERROR script $PTH does not exist

Cause: The specified script path does not exist.

Action: Correct the path of the script.
126115 ERROR script $PTH is a zero length file

Cause: The specified script is an empty file.

Action: Correct the script’s file path and check the contents inside the script.
126117 ERROR script $PTH is not executable

Cause: The specified script is not executable.

Action: Correct the script’s file path, check the contents inside the script file and make sure it has the proper execute permissions.
126125 ERROR required template machine name is null

Cause: The input template machine name is null.

Action: Correct the input template machine name.
126130 ERROR required template resource tag name is null

Cause: The input template resource {tag} is null.

Action: Correct the input template resource tag name.
126135 ERROR Unable to generate a new tag

Cause: Failed to generate a new tag as the same as the template tag name on the target node using the "newtag" script during the extension. The tag name is already existing.

Action: Avoid using duplicate tag name on the same node and check the log for detail.
126140 ERROR Unable to generate a new tag

Cause: Failed to generate a new tag as input target tag name on the target node using the "newtag" script during the extension. The tag name is already existing.

Action: Avoid using duplicate tag name on the same node and check log for detail.
126145 ERROR Unable to generate a new id
126150 ERROR unable to remote copy template \"$_lscript\" script file

Cause: Failed to remote copy template script file. The cause may be due to the non-existence/availability of template script file on template node or any transaction failure during "lcdrcp" process.

Action: Check the existence/availability of template script and the connection to template node. Also check the logs for related errors and try to resolve the reported problem.
126155 ERROR failed to create resource instance on \"$TargetSysName\

Cause: Failed to create resource instance using "ins_create".

Action: Check the logs for related errors and try to resolve the reported problem.
126160 ERROR failed to set resource instance state for \"$TargetTagName\" on \"$TargetSysName\

Cause: Failed to set resource instance state using "ins_setstate" during GenApp resource extension.

Action: Check the logs for related errors and try to resolve the reported problem.
126170 ERROR getlocks failure

Cause: Failed to get the administrative lock when creating a resource hierarchy.

Action: Check the logs for related errors and try to resolve the reported problem.
126175 ERROR instance create failed

Cause: Failed to create a GenApp instance using "appins".

Action: Check the logs for related errors and try to resolve the reported problem.
126180 ERROR unable to set state to OSU

Cause: Failed to set resource instance state using "ins_setstate" during GenApp resource creation.

Action: Check the logs for related errors and try to resolve the reported problem.
126190 ERROR resource restore has failed

Cause: Failed to restore GenApp resource.

Action: Check the logs for related errors and try to resolve the reported problem.
126200 ERROR create application hierarchy rlslocks failure

Cause: Failed to release lock after GenApp resource created.

Action: Check the logs for related errors and try to resolve the reported problem.
126210 ERROR copy $ltype script $lscript failure

Cause: Failed to copy user provided script to appropriate GenApp directory during resource creation.

Action: Check the existence/availability of user provided script and the GenApp directory as well. Also check the logs for related errors and try to resolve the reported problem.
126215 ERROR no $ltype script specified

Cause: Missing user defined script during GenApp resource creation.

Action: Check the input action script and run resource creation again.
126220 ERROR no machine name specified

Cause: Missing specified machine name during GenApp resource creation. Failed to copy specified user script due to missing the input for machine name.

Action: Check the input for machine name and run resource creation again.
126225 ERROR no resource tag specified

Cause: Missing specified tag name during resource creation.

Action: Check the input for source tag name and run resource creation again.
126230 ERROR $ERRMSG Script was terminated for unknown reason

Cause: Failed to extend GenApp resource due to unknown reason.

Action: Check the logs for related errors and try to resolve the reported problem.
126235 ERROR $ERRMSG Required template machine name is null

Cause: Missing the input for template machine name during GenApp resource extension.

Action: Check the input for template machine name and do the resource extension again.
126240 ERROR $ERRMSG Required template resource tag name is null

Cause: Missing the input for template resource tag name during GenApp resource extension.

Action: Check the input for template resource tag name and do the resource extension again.
126245 ERROR $ERRMSG Can not access extend for $AppType/$ResType resources on machine \"$TargetSysName\

Cause: Failed to locate "extend" script during GenApp resource extension on target node.

Action: Check the existence/availability of "extend" script and do GenApp resource extension again.
126250 ERROR create application failure – ins_list failed

Cause: Failed when calling "ins_list" during GenApp resource creation.

Action: Check the logs for related errors and try to resolve the reported problem.
126255 ERROR create application failure – unable to generate a new tag

Cause: Failed to generate a new tag during the GenApp resource creation.

Action: Avoid using duplicate tag name on the same node. Also check the logs for related errors and try to resolve the reported problem.
126260 ERROR create application failure – unable to create a new id
126270 ERROR create application failure – ins_create failed

Cause: Failed using "ins_create" to create GenApp instance.

Action: Check the logs for related errors and try to resolve the reported problem.
126275 ERROR create application failure – copy_actions failed

Cause: Failed using "copy_actions" to copy user specified template script file.

Action: Check the existence/availability of template script. Also check the logs for related errors and try to resolve the reported problem.
126290 ERROR Unable to obtain tag for resource with id $ID

Cause: Failed to fetch GenApp resource tag name by input ID during recovery.

Action: Check the correctness of input ID and existance/availability of GenApp resource in LCD. Also check the logs for related errors and try to resolve the reported problem.
126300 ERROR generic application recover script for $TAG was not found or was not executable

Cause: Failed to locate the user defined script for GenApp resource during recovery.

Action: Check the existence/availability of the user defined script and do the GenApp recovery process again.
126310 ERROR -t flag not specified

Cause: Missing the input for resource tag name during GenApp resource restore.

Action: Check the input for resource tag name and do resource restore again.
126315 ERROR -i flag not specified

Cause: Missing the input for resource internal id during GenApp resource restore.

Action: Check the input for resource internal id and do resource restore again.
126327 ERROR END timeout restore of \"$TAG\" (forcibly terminating)
126335 ERROR restore script \"$LCDAS/$APP_RESTOREDIR/$TAG\" was not found or is not executable

Cause: Failed to locate the user defined script for GenApp resource during restore.

Action: Check the existence/availability of the user defined script and do the GenApp restore process again.
126340 ERROR -t flag not specified

Cause: Missing the input for resource tag name during GenApp resource remove.

Action: Check the input for resource tag name and do resource remove again.
126345 ERROR -i flag not specified

Cause: Missing the input for resource internal id during GenApp resource remove.

Action: Check the input for resource internal id and do resource remove again.
126357 ERROR END timeout remove of \"$TAG\" (forcibly terminating)
126365 ERROR remove script \"$LCDAS/$APP_REMOVEDIR/$TAG\" was not found or was not executable

Cause: Failed to locate the user defined script for GenApp resource during remove.

Action: Check the existence/availability of the user defined script and do the GenApp remove process again.
126375 ERROR Script has hung checking \"$tag\". Forcibly terminating.

Cause: The "quickCheck" Script will be forcibly terminated for GenApp resource with tag name {tag} due to a waiting time over the user defined timeout.

Action: Check the GenApp resource performance and restart quickChecking. Also check the logs for related errors and try to resolve the reported problem.
126380 ERROR Usage error: no tag specified

Cause: Missing the input for resource tag name during GenApp resource quickCheck.

Action: Check the input for resource tag name and retry resource quickCheck.
126385 ERROR Internal error: ins_list failed on $tag.

Cause: Failed using "ins_list" to fetch the GenApp resource information by input tag name during the quickCheck process.

Action: Correct the input tag name and do the quickCheck process again. Also check the logs for related errors and try to resolve the reported problem.
126390 FATAL Failed to fork process to execute $userscript: $!

Cause: Failed to fork process to execute user defined "quickCheck" script during the GenApp resource "quickCheck" process.

Action: Check the existency/availability of the user defined "quickCheck" script and do the "quickCheck" process again.
126391 ERROR quickCheck has failed for \"$tag\". Starting recovery.

Cause: The GenApp resource with tag name {tag} is determined to be failed by using the user defined health monitoring script – "quickCheck" and the recovery process will be initiated.

Action: Check the performance of the GenApp resource when local recovery finished. Also check the logs for related errors and try to resolve the reported problem.
126392 WARN ${convtag}_TIMEOUT: This parameter is old. This parameter will not be supported soon.
126400 ERROR -t flag not specified

Cause: Missing the input for resource tag name during GenApp resource deletion process.

Action: Check the input for resource tag name and do resource deletion process again.
126405 ERROR -i flag not specified

Cause: Missing the input for resource internal id during GenApp resource deletion process.

Action: Check the input for resource internal id and do resource deletion process again.
126478 ERROR Failed to create tag \’$new_leaf\’.

Cause: The ‘creapphier’ utility failed to create the specified tag.

Action: Check /var/log/lifekeeper.log for additional messages from ‘creapphier’.
126479 ERROR Failed to extend tag \’$new_leaf\’.

Action: Check /var/log/lifekeeper.log for additional errors from extend manager.
126481 ERROR Failed to create dependency on \’$sys\’ for \’$new_leaf\’ to \’$hier{$leaf}{$sys}{‘Tag’}\’.

Action: Check /var/log/lifekeeper.log for errors from the ‘dep_create’ function
126484 ERROR Tag \’$root_tag\’ is not in-service.

Cause: The specified tag is not in-service on any node in the cluster.

Action: Bring the specified tag in-service on any node in the cluster and re-run ‘create_terminal_leaf’.
126485 ERROR Tag \’$root_tag_1\’ was not found, select the root tag for a hierarchy to add a terminal leaf resource.

Cause: The first tag passed to ‘create_terminal_leaf’ was not found on the system where the utility was run.

Action: Verify each node is in-service on a node in the cluster and fully extended to all nodes.
126486 ERROR Unable to create leaf tag from \’$tag\’.

Cause: A unique terminal leaf tag could not be created. A unique terminal leaf tag could not be created after 100 tries.

Action: Check for multiple leaf tags and for errors in /var/log/lifekeeper.log that may indicate the problem.
126487 ERROR Tag \’$root_tag_2\’ was not found, select the root tag for a hierarchy to add a terminal leaf resource.

Cause: The second tag passed to ‘create_terminal_leaf’ was not found on the system where the utility was run.

Action: Verify each node is in-service on a node in the cluster and fully extended to all nodes.
126488 ERROR Tag \’$root_tag_1’ is not extended to 3 or more systems.

Cause: The specified tag is not extended to 3 or more nodes.

Action: Extend the specified tag to at least 3 nodes and retry ‘create_terminal_leaf’.
128005 ERROR END failed %s of "%s" on server "%s" due to a "%s" signal

Cause: The quickCheck of {resource} on {server} failed due to an operating system signal {signal}.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128008 ERROR Usage: quickCheck -t <tag name> -i <id>

Cause: Incorrect arguments have been supplied to the dmmp device quickCheck command preventing it from running.

Action: Make sure all software components are properly installed and at the correct version. Rerun the command and supply the correct argument list: -t <Resource Tag> and -i <Resource ID> that identifies the dmmp device resource to be quickChecked.
128010 ERROR quickCheck for "%s" failed checks of underlying paths, initiate recovery. retry count=%s.

Cause: The dmmp kit failed to quickCheck a device after {count} times of retries. A recovery of the protected dmmp resource will be executed.

Action: Check adjacent log messages for further details and related messages.
128021 ERROR unable to find device for uuid "%s".

Cause: The device could not be found by unique id during a restore operation.

Action: Verify that the resource is configured properly. Rerun the command and supply the correct device id that identifies the dmmp device resource to be restored.
128025 ERROR Device "%s" failed to unlock.

Cause: A non working {device} was detected and could not be unlocked during the restore operation.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128026 ERROR Device "%s" failed to lock.

Cause: The {device} could not be locked during the resotre.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128031 ERROR unable to find device for uuid "%s".

Cause: The device could not be found by unique id during the remove operation.

Action: Verify that the resource is configured properly. Rerun the command and supply the correct device id that identifies the dmmp device resource to be removed.
128034 ERROR Device "%s" failed to unlock.

Cause: The {device} could not be unlocked during the remove.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128036 ERROR unable to load existing information for device with uuid "%s".

Cause: The device information could not be loaded by unique id.

Action: Make sure the resource is configured properly. Rerun the command and supply the correct device id that identifies the dmmp device resource.
128037 ERROR unable to load existing information for device "%s".

Cause: The device information could not be loaded by name.

Action: Make sure the resource is configured properly. Rerun the command and supply the correct device name that identifies the dmmp device resource.
128038 ERROR unable to load existing information for device, no dev or uuid defined.

Cause: The device information could not be loaded since neither a unique device id nor name of the device were defined.

Action: Make sure the resource is configured properly. Rerun the command and supply the correct device id or name that identifies the dmmp device resource.
128041 ERROR unable to load existing information for device with uuid "%s".

Cause: The device information could not be loaded by unique id.

Action: Make sure the resource is configured properly. Rerun the command and supply the correct device id that identifies the dmmp device resource.
128057 ERROR All paths are failed on "%s".

Cause: LifeKeeper detected all paths listed to the protected dmmp device are in the failed state.

Action: Check adjacent log messages for further details and related messages.

128058 ERROR could not determine registrations for "%s"! All paths failed.

Cause: LifeKeeper could not determine registrations for protected dmmp {device}. All paths to the dmmp {device} are in the failed state.

Action: Check adjacent log messages for further details and related messages.
128059 WARN path "%s" no longer configured for "%s", remove from path list.

Cause: LifeKeeper detected listed {path} to protected {device} is not valid anymore and will remove it from the path list.

Action: Check adjacent log messages for further details and related messages.
128060 WARN registration failed on path "%s" for "%s".

Cause: LifeKeeper failed the registration on {path} for protected dmmp {device}.

Action: Check adjacent log messages for further details and related messages.
128062 ERROR all paths failed for "%s".

Cause: LifeKeeper failed to verify a valid path to protected dmmp {device}.

Action: Check adjacent log messages for further details and related messages.
128072 ERROR The daemon "%s" does not appear to be running and could not be restarted. Path failures may not be correctly handled without this daemon.

Cause: LifeKeeper failed to verify dmmp daemon is running and could not restart it.

Action: Check adjacent log messages for further details and related messages.
128078 ERROR "%s" resource type is not installed on "%s".

Cause: The Device Mapper Multipath Recovery Kit for dmmp device support is not installed on the system.

Action: Install the steeleye-lkDMMP Device Mapper Multipath Recovery Kit rpm on the system.
128083 ERROR This script must be executed on "%s".

Cause: An incorrect system name has been supplied as an argument to the devicehier script used to create the dmmp device resource.

Action: Make sure the cluster nodes and comm-paths are properly configured. Supply the correct system name to the devicehier script. The name must match the name of the system on which the command is run.
128084 ERROR The device %s is not active.

Cause: LifeKeeper failed to find the specified {device} as a valid device on the system during resource creation.

Action: Check adjacent log messages for further details and related messages. Rerun the command and supply the correct argument list: -t <Resource Tag> and -i <Resource ID> that identifies the dmmp device resource to be created.
128086 ERROR Failed to create "%s" hierarchy.

Cause: LifeKeeper failed to create resource hierarchy for {device}.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128088 ERROR Error creating resource "%s" on server "%s"

Cause: LifeKeeper failed to create the resource with {tagname} on {server}.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128090 ERROR Failed to create dependency "%s"-"%s" on system "%s".

Cause: LifeKeeper failed to create dependency {resource tag name} – {resource tag name} on {system} during creation.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128091 ERROR Error creating resource "%s" on server "%s"

Cause: LifeKeeper failed to create {resource} on {system}.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128101 ERROR "%s" constructor requires a valid argument.

Cause: LifeKeeper failed to create an object for the dmmp resouce during construction.

Action: Rerun the command and supply the correct argument list: -t <Resource Tag> and -i <Resource ID> that identifies the dmmp device resource.
128102 ERROR Invalid tag "%s".

Cause: A resource instance could not be found for the given tag name.

Action: Make sure the resource is configured properly. Rerun the command and supply the correct argument list: -t <Resource Tag> and -i <Resource ID> that identifies the dmmp device resource.
128111 ERROR Failed to get registrations for "%s": %s. Verify the storage supports persistent reservations.

Cause: LifeKeeper failed to get the registrations of {device} with the message, "bad field in Persistent reservation in cdb".

Action: Verify if the storage supports persistent reservations. Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128112 ERROR Failed to get registrations for "%s": %s. Verify the storage supports persistent reservations.

Cause: LifeKeeper failed to get the registrations of {device} with the message, "illegal request".

Action: Verify if the storage supports persistent reservations. Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128136 ERROR A previous quickCheck with PID "%s" running for device "%s" has been terminated.

Cause: LifeKeeper detected that a previous quickCheck operation is still running during the dmmp resource restore operation. It has been terminated by LifeKeeper.

Action: Check adjacent log messages for further details and related messages.

128137 ERROR SCSI reservation conflict on %s during LifeKeeper resource initialization. Manual intervention required.

Cause: LifeKeeper detected a SCSI reservation conflict on {device} during dmmp resource restore.

Action: Check adjacent log messages for further details and related messages. Manual intervention and fix of the reservation conflict on {device} is required.
128138 ERROR unable to clear registrations on %s.

Cause: LifeKeeper failed to clear all the registrations on {device}.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128140 WARN registration failed on path %s for %s.

Cause: LifeKeeper failed to make the registratioin on {path} for {device}.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128143 ERROR reserve failed (%d) on %s.

Cause: LifeKeeper failed to make reservation for {resource} on {device}.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128145 ERROR The server ID "%s" returned by "%s" is not valid.

Cause: LifeKeeper failed to generate a valid host {ID}.

Action: The ID used to register a device is made up of 1 to 12 Hex digits that uniquely identifies the server in the cluster. Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128146 ERROR device failure on %s. SYSTEM HALTED.

Cause: LifeKeeper detected failure on {device} and will reboot the server.

Action: Check adjacent log messages for further details and related messages.

128148 ERROR device failure on %s. SYSTEM HALTED DISABLED.

Cause: LifeKeeper detected a failure on {device}. The reboot was skipped due to LifeKeeper configuration.

Action: Check adjacent log messages for further details and related messages. Turn on the configuration "SCSIHALT" to make the reboot available for any detected device failure.
128149 ERROR device failure or SCSI Error on %s. SENDEVENT DISABLED.

Cause: LifeKeeper detected a failure on {device}. The event generation was skipped due to LifeKeeper configuration.

Action: Check adjacent log messages for further details and related messages. Turn on the configuration "SCSIEVENT" to make the sendevent available for any detected device failure.
128150 ERROR %s does not have EXCLUSIVE access to %s, halt system.

Cause: LifeKeeper detected a reservation conflict for {device} on {server} and will reboot the server.

Action: Check adjacent log messages for further details and related messages.
128151 ERROR %s does not have EXCLUSIVE access to %s, halt system DISABLED.

Cause: LifeKeeper detected a reservation conflict for {device} on {server}. The reboot was skipped due to LifeKeeper configuration.

Action: Check adjacent log messages for further details and related messages. Turn on the configuration "RESERVATIONCONFLICT" to make the reboot available for any detected reservation conflicts.
128154 WARN unable to flush buffers on %s.

Cause: LifeKeeper failed to flush the buffers for {device} during dmmp resource remove.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128157 WARN %s utility not found, limited healthcheck for %s.

Cause: LifeKeeper failed to find "dd" utility for the health check of {device}.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128160 ERROR %s failed to read %s.

Cause: LifeKeeper failed a disk I/O test for {device} when using {utility}.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128163 ERROR Registration ID "%s" for "%s" is not valid.

Cause: LifeKeeper failed to generate a valid registration {ID} for {device}.

Action: The ID used to register a device is made up of 4 Hex digits derived from the path to the device. Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128170 ERROR Usage: canextend <Template system name> <Template tag name>
128500 ERROR Usage error

Cause: Incorrect arguments have been supplied to the dmmp device restore command preventing it from running.

Action: Rerun the command and supply the correct argument list: -t <Resource Tag> and -i <Resource ID> that identifies the dmmp device resource to be restored.
128504 ERROR "%s" resource type is not installed on "%s".

Cause: The Device Mapper Multipath Recovery Kit for dmmp device support is not installed on the system.

Action: Install the steeleye-lkDMMP Device Mapper Multipath Recovery Kit rpm on the system.
128506 ERROR Usage error

Cause: Incorrect arguments have been supplied to the dmmp device devShared command preventing it from running.

Action: Rerun the command and supply the correct argument list: <Template Resource System Name> and <Template Resource Tag> that identifies the dmmp device resource to be created.
128507 FATAL This script must be executed on "%s".

Cause: An incorrect system name has been supplied as an argument to the devicehier script used to create the dmmp device resource.

Action: Supply the correct system name to the devicehier script. The name must match the name of the system on which the command is run.
128511 ERROR Failed to get the ID for the device "%s". Hierarchy create failed.

Cause: The devicehier script used to create the dmmp device resource was unable to determine the SCSI ID for the supplied device.

Action: Check that the supplied device path exists and that is for a supported SCSI storage array.
128512 ERROR Failed to get the disk ID for the device "%s". Hierarchy create failed.

Cause: The devicehier script used to create the dmmp disk resource was unable to determine the SCSI ID for the supplied disk.

Action: Check that the supplied device path exists and that is for a supported SCSI storage array.
128513 ERROR Failed to create the underlying resource for device "%s". Hierarchy create failed.

Cause: The creation of the underlying dmmp disk resource failed.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128515 ERROR Error creating resource "%s" on server "%s"

Cause: The creation of the dmmp device resource failed.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128517 ERROR Failed to create dependency "%s"-"%s" on system "%s".

Cause: The parent child dependency creation between the dmmp device and dmmp disk resources failed.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128519 ERROR Error creating resource "%s" on server "%s"

Cause: The attempt to bring the newly created dmmp device resource in service has failed.

Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation.
128521 ERROR Either TEMPLATESYS or TEMPLATETAG argument missing

Cause: Incorrect arguments have been supplied to the extend command for the dmmp device resource.

Action: Rerun the dmmp device resource extend and supply the correct template system and tag names.
128540 ERROR Usage error

Cause: Incorrect arguments have been supplied to the dmmp device getId command used to retrieve the SCSI ID.

Action: Rerun the command and supply the correct argument list: -i <device path> or -b <device ID>.
128541 ERROR Usage error

Cause: Incorrect arguments have been supplied to the command used to delete the dmmp device resource.

Action: Rerun the command and supply the correct argument list: -t <dmmp device resource tag>.
128543 ERROR device node \"$dev\" does not exist.

Cause: The device node required for restoring the dmmp device resource does not exist. The allocated wait time in restore for udev device creation has been exceed.

Action: Rerun the dmmp device resource restore once udev has created the device.
128544 ERROR Usage error

Cause: Incorrect arguments have been supplied to the remove command used to take the dmmp device resource out of service.

Action: Rerun the command and supply the correct argument list: -t <dmmp device resource tag>.
129100 FATAL Failed to load instance from LifeKeeper.

Cause: An invalid resource tag or ID was specified.

Action: Check that the tag or ID is valid and re-run the command.
129103 FATAL No resource matches tag \"$self->{‘tag’}\".

Cause: An invalid resource tag was specified.

Action: Check the tag and re-run the command.
129104 FATAL An error occurred setting LifeKeeper resource information

Cause: An internal error has occurred in LifeKeeper.
129110 ERROR Could not get the Elastic Network Interface ID for $dev

Cause: The EC2 API call failed, possibly due to a network issue.

Action: Check the network and the Amazon console and retry the operation.
129111 ERROR Failed to get Allocation ID of Elastic IP \"$elasticIp\".

Cause: The EC2 API call failed, possibly due to a network issue.

Action: Check the network and the Amazon console and retry the operation.
129113 ERROR Failed to get my instance ID.

Cause: The EC2 instance metadata access failed.

Action: Check the Amazon console and retry the operation.
129114 ERROR Failed to get ENI ID.

Cause: The EC2 API call failed, possibly due to a network issue.

Action: Check the network and the Amazon console and retry the operation.
129116 ERROR Failed to associate Elastic IP \"$self->{‘EIP’}\" on \"$self->{‘DEV’}\".

Cause: The EC2 API call failed, possibly due to a network issue.

Action: Check the network and the Amazon console and retry the operation.
129118 WARN $self->{‘EIP’} is not associated with any instance.

Cause: The Elastic IP is not associated with any instance.

Action: LifeKeeper will try to fix the issue by calling the EC2 API to associate the Elastic IP. Check adjacent log messages for more details.

129119 WARN $self->{‘EIP’} is associated with another instance.

Cause: The Elastic IP is associated with another instance.

Action: LifeKeeper will try to fix the issue by calling the EC2 API to associate the Elastic IP. Check adjacent log messages for more details.
129120 ERROR Failed to recover Elastic IP.

Cause: The EC2 API call failed to associate the Elastic IP.

Action: Check the network and the Amazon console and retry the operation.
129121 ERROR Recovery process ended but Elastic IP is not associated with this instance. Please check AWS console.

Cause: The EC2 API call failed to associate the Elastic IP.

Action: Check the network and the Amazon console and retry the operation.

129122 ERROR Error creating resource \"$target_tag\" with return code of \"$err\".

Cause: LifeKeeper was unable to create the resource instance on the server.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors.
129123 ERROR Failed to get ENI ID.

Cause: The EC2 API call failed, possibly due to a network issue.

Action: Check the network and the Amazon console and retry the operation.
129124 WARN $self->{‘EIP’} is associated with another network interface.

Cause: The Elastic IP is associated with the proper instance, but the wrong ENI.

Action: LifeKeeper will try to fix the issue by calling the EC2 API to associate the Elastic IP. Check adjacent log messages for more details.
129125 ERROR Link check failed for interface \’$dev\’.

Cause: The requested interface is showing ‘NO-CARRIER’ indicating that no link is present.

Action: Check the network interface and bring the link up.
129126 ERROR Link check failed for interface \’$dev\’. Reason: down slave.

Cause: The requested interface is showing ‘NO-CARRIER’ indicating that no link is present.

Action: Check the network interface and bring the link up.
129129 WARN The link for network interface \’$self->{‘DEV’}\’ is down. Attempting to bring the link up.

Cause: The requested interface is showing ‘NO-CARRIER’ indicating that no link is present.

Action: LifeKeeper will try to fix the issue by bringing the link up and associating the Elastic IP with the interface. Check adjacent log messages for more details.
129130 ERROR Failed to modify \"$opt_t\" to end pint URL \"$endpoint\".
129137 ERROR The link for network interface \’$self->{‘DEV’}\’ is still down.

Cause: LifeKeeper could not bring the link up.

Action: Ensure the interface is enabled and up. Check adjacent log messages for more details.
129139 WARN The link for network interface \’$self->{‘DEV’}\’ is down.

Cause: The requested interface is showing ‘NO-CARRIER’ indicating that no link is present.

Action: Check the network interface and bring the link up.
129140 ERROR Could not get ENI ID for $self->{IP}.

Cause: The EC2 API call failed, possibly due to a network issue.

Action: Check the network and the Amazon console and retry the operation.
129142 ERROR Failed to update route table

Cause: The EC2 API call failed, possibly due to a network issue.

Action: Check the network and the Amazon console and retry the operation.
129143 ERROR You must have exactly one IP address resource as the parent of the RouteTable EC2 resource. Please reconfigure your resource hierarchy.

Cause: The Route Table EC2 resource must have one and only one IP resource as a parent.

Action: Repair the resource hierarchy as necessary.
129144 ERROR $func called with invalid timeout: $timeout

Cause: An invalid timeout value was specified in the /etc/default/LifeKeeper file.

Action: Verify all EC2_*_TIMEOUT settings are valid in /etc/default/LifeKeeper.
129145 ERROR $func action timed out after $timeout seconds

Cause: The action did not complete within the timeout period.

Action: Consider increasing the EC2_*_TIMEOUT value for the given action (in /etc/default/LifeKeeper).
129146 ERROR failed to run $func with timeout: $@

Cause: This is an internal error.
129148 ERROR Amazon describe-route-tables call failed (err=%s)(output=%s)

Cause: The EC2 API call failed, possibly due to a network issue.

Action: Check the network and the Amazon console and retry the operation.
129150 ERROR Elastic IP \"$elasticIp\" is associated with another instance.

Cause: The Elastic IP is not associated with the proper instance.

Action: LifeKeeper will try to fix the issue by calling the EC2 API to associate the Elastic IP. Check adjacent log messages for more details.
129151 ERROR Could not get the Association ID for Elastic IP \"$elasticIp\".

Cause: The EC2 API call failed, possibly due to a network issue.

Action: Check the network and the Amazon console and retry the operation.
129152 ERROR Failed to disassociate Elastic IP \"$self->{‘EIP’}\" on \"$self->{‘DEV’}\".

Cause: The EC2 API call failed, possibly due to a network issue.

Action: Check the network and the Amazon console and retry the operation.

129153 ERROR Failed to disassociate Elastic IP \"$elasticIp\", (err=%s)(output=%s)

Cause: The EC2 API call failed, possibly due to a network issue.

Action: Check the network and the Amazon console and retry the operation.
129154 ERROR Amazon describe-addresses call failed (err=%s)(output=%s)

Cause: The EC2 API call failed, possibly due to a network issue.

Action: Check the network and the Amazon console and retry the operation.
129155 ERROR Amazon describe-address call failed (err=%s)(output=%s)

Cause: The EC2 API call failed, possibly due to a network issue.

Action: Check the network and the Amazon console and retry the operation.
129157 ERROR curl call failed (err=%s)(output=%s)

Cause: The EC2 instance metadata access failed.

Action: Check the Amazon console and retry the operation.
129159 ERROR Amazon associate-address call failed (err=%s)(output=%s)

Cause: The EC2 API call failed, possibly due to a network issue.

Action: Check the network and the Amazon console and retry the operation.
129160 ERROR Amazon describe-addresses call failed (err=%s)(output=%s)

Cause: The EC2 API call failed, possibly due to a network issue.

Action: Check the network and the Amazon console and retry the operation.
129161 ERROR Error deleting resource \"$otherTag\" on \"$otherSys\" with return code of \"$err\".

Cause: LifeKeeper was unable to delete the resource instance on the server.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors.
129162 ERROR Could not getRouteTablesByIP
129163 ERROR Could not getRouteTablesByIP
129164 ERROR [$SUBJECT event] mail returned $err
129165 ERROR COMMAND OUTPUT: cat /tmp/err$$
129167 ERROR snmptrap returned $err for Trap 180
129168 ERROR COMMAND OUTPUT: cat /tmp/err$$
129170 ERROR This resource is in the old format. Please update.
129403 ERROR END failed create of $TAG due to a $sig signal

Cause: The create process was interrupted by a signal.
129409 ERROR The IP resource $IP_RES is not \"ISP\".

Cause: The IP resource is not in service.

Action: Bring the resource in service and retry the operation.
129410 ERROR Could not find IP resource $IP_RES

Cause: Ensure that the IP resource exists and retry the operation.
129412 ERROR EC2 resource $ID is already protected

Cause: A resource with the specified ID already exists.

Action: Make sure to clean up any remnants of an old resource before re-creating a new resource.
129416 ERROR Error creating resource \"$TAG\" with return code of \"$lcderror\".

Cause: LifeKeeper was unable to create the resource instance.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors.
129418 ERROR Dependency creation between \"$IP_RES\" and \"$TAG\" failed with return code of \"$lcderror\".

Cause: LifeKeeper was unable to create the resource dependency.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors.
129420 ERROR In-service failed for tag \"$TAG\".

Cause: LifeKeeper could not bring the resource instance into service.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors.
129423 ERROR Could not get ENI ID for $dev.
129425 ERROR Failed to update route table
129800 ERROR canextend checks failed for \"$self->{‘tag’}\" (err=$ret)

Cause: The pre-extend checks failed for the target server.

Action: Check adjacent log messages for further details and related messages. Correct any reported errors.
129801 ERROR canextend checks failed for \"$self->{‘tag’}\". EC2_HOME \"$self->{EC2_HOME}\" does not exist on $me.
133106 ERROR You must have exactly one IP address resource as the child of the route53 resource. Please reconfigure your resource hierarchy.
133111 ERROR Failed to init the object.
133114 ERROR Failed start Route53 resource $self->{Tag}
133115 ERROR Failed start Route53 resource $self->{Tag}
133116 WARN Could not Get A Record Value Address : $aAWSresult
133117 WARN aws call failed : $aAWSresult
133118 WARN aws call failed : $upsertResp
133119 ERROR Could not Update and Create A Record Set : $upsertResp
133120 WARN Could not get Route53 API batch request ID form UPSERT response XML data : $upsertResp
133122 WARN aws call failed : $statusResult
133123 ERROR Faild check change batch request status : $statusResult
133126 WARN Failed to Route53 API response : $rc
133128 WARN Failed to Route53 API response
133129 ERROR Route53 resource $self->{Tag} is stopped
133130 ERROR $self->{Tag} is in the old format. Please update.
133601 ERROR $usage);
133602 ERROR Template resource \"$template_tag\" on server \"$template_sys\" does not exist
133608 ERROR Template resource \"$template_tag\" on server \"$template_sys\" does not exist
133614 ERROR Error creating resource \"$Tag\" on server \"$me\"
133617 ERROR END failed hierarchy extend of resource $Tag with return value of $ecode.
133619 ERROR $usage);
133620 ERROR END failed extend of \"$Tag\" due to a \"$sig\" signal
133700 ERROR $usage);
133701 ERROR END failed create of \"$Route53Tag\" due to a \"$sig\" signal
133703 ERROR Unable to getlocks on $me during resource create.
133704 ERROR The route53 on $Route53HostName is already protected by LifeKeeper.
133706 ERROR Error creating resource $Route53Tag. Error ($rc)
133708 ERROR Dependency create failed between $Route53Tag and $Route53IPResTag. Error ($rc).
133710 ERROR In-service attempted failed for tag $Route53Tag.
133813 ERROR Usage: $usage
133815 ERROR The host name \"$hostname\" is too long.
133816 ERROR The host name \"$hostname\" is too short.
133817 ERROR The host name \"$hostname\" contains invalid character.
133818 ERROR The first character must be an alpha character.
133819 ERROR The last character must not be a minus sign or period.
133826 ERROR Host Name cannot be blank.
134003 ERROR LK_ERROR:$tag:catch a \"$sig\" signal

Cause: The “create” process was interrupted by a signal.

Action: Check adjacent log messages.
134004 ERROR LK_ERROR:$tag:Unable to getlocks on $server during resource create. Error ($rc)

Cause: Failed to get the administrative lock when creating a resource hierarchy.

Action: Check the logs for related errors and try to resolve the reported problem.
134005 ERROR LK_ERROR:$tag:The service \"$serviceName\" is not supported on $server. Error ($rc)

Cause: The service does not exist or cannot be protected.

Action: Input the appropriate service name.
134006 ERROR LK_ERROR:$tag:The service \"$serviceName\" is already protected on $server.

Cause: This service is already protected.

Action: Can not create a resource for the protection of this service.
134007 ERROR LK_ERROR:$tag:Error creating resource $tag. Error ($rc)

Cause: LifeKeeper was unable to create the resource instance.

Action: Check adjacent log messages. Correct the cause of the error.
134011 ERROR LK_ERROR:$tag:In-service attempted failed for tag $tag.

Cause: Failed to restore QSP resource.

Action: Check the log related to the service that you want to protect. Resolve the problem.
134015 ERROR LK_ERROR:$tag:Unable to rlslocks on $server during resource create. Error ($rc)

Cause: Failed to release lock after QSP resource created.

Action: Check the logs for related errors and try to resolve the reported problem.
134103 ERROR LK_ERROR:$tag:Template resource \"$template_tag\" on server \"$template_sys\" does not exist

Cause: The resource cannot be found on the template server.

Action: Ensure the hierarchy is correct on the template server before extending.
134104 ERROR LK_ERROR:$tag:Template resource \"$template_tag\" on server \"$template_sys\" is not QSP resource (app=$ins1, res=$ins2)

Cause: The template resource is not QSP resource.

Action: Expand to the same type of resources as a template resource.
134105 ERROR LK_ERROR:$tag:The service \"$service\" is not supported on $me. Error ($check)

Cause: The service does not exist on target server.

Action: Install the service on target server before extending.
134106 ERROR LK_ERROR:$tag:The service \"$service\" is already protected on $me.

Cause: There is already a resource of the same ID on target server.

Action: Cannot create the resource of the same service.

134203 ERROR LK_ERROR:$tag:catch a \"$sig\" signal

Cause: The “extend” process resource was interrupted by a signal.

Action: Check adjacent log messages.
134204 ERROR LK_ERROR:$tag:Template resource \"$template_tag\" on server \"$template_sys\" does not exist

Cause: The resource cannot be found on the template server.

Action: Ensure the hierarchy is correct on the template server before extending.
134208 ERROR LK_ERROR:$tag:Error creating resource \"$tag\" on server \"$me\"

Cause: LifeKeeper was unable to create the resource instance on target server.

Action: Check adjacent log messages. Correct the cause of the error.
134401 ERROR LK_ERROR:$tag:timeout $cmd for \"$tag\". Forcibly terminating.

Cause: The “restore” process of the service does not terminate within the specified time.

Action: Check about the protected service and retry the “restore” operation. Also check the logs for related errors and try to resolve the reported problem.
134405 FATAL LK_FATAL:$tag:Failed to fork process to execute service command: $!

Cause: Failed to fork. This is a system error.

Action: Determine why fork fails.
134407 ERROR LK_ERROR:$tag:service command has failed for \"$tag\"

Cause: Failed to execute service command.

Action: It is an error to manually run the service command with “start” option. Correct the cause of the error by reference to error message.
134501 ERROR LK_ERROR:$tag:timeout $cmd for \"$tag\". Forcibly terminating.

Cause: The “remove” process of the service does not terminate within the specified time.

Action: Check about the protected service and retry the “remove” operation. Also check the logs for related errors and try to resolve the reported problem.
134505 FATAL LK_FATAL:$tag:Failed to fork process to execute service command: $!

Cause: Failed to fork. This is a system error.

Action: Determine why fork fails.
134507 ERROR LK_ERROR:$tag:service command has failed for \"$tag\"

Cause: Failed to execute service command.

Action: It is an error to manually run the service command with “stop” option. Correct the cause of the error by reference to error message.
134601 ERROR LK_ERROR:$tag:timeout $cmd for \"$tag\". Forcibly terminating.

Cause: The "quickCheck" process will be forcibly terminated due to a waiting time over the user defined timeout.

Action: Check about the protected service. Also check the logs for related errors and try to resolve the reported problem.
134605 FATAL LK_FATAL:$tag:Failed to fork process to execute service command: $!

Cause: Failed to fork. This is a system error.

Action: Determine why fork fails.
134607 ERROR LK_ERROR:$tag:service command has failed for \"$tag\"

Cause: Failed to execute service command.

Action: It is an error to manually run the service command with “status” option. Correct the cause of the error by reference to error message.
134701 ERROR LK_ERROR:$tag:timeout $cmd for \"$tag\". Forcibly terminating.

Cause: The “recover” process of the service does not terminate within the specified time.

Action: Check about the protected service. Also check the logs for related errors and try to resolve the reported problem.
134706 FATAL LK_FATAL:$tag:Failed to fork process to execute service command: $!

Cause: Failed to fork. This is a system error.

Action: Determine why fork fails.
134708 ERROR LK_ERROR:$tag:service command has failed for \"$tag\"

Cause: Failed to execute service command.

Action: It is an error to manually run the service command with “start” option. Correct the cause of the error by reference to error message.
134803 ERROR LK_ERROR:$tag:tag \"$tag\" does not exist on server \"$me\"

Cause: The specified tag does not exist. This is an internal error.
134804 ERROR LK_ERROR:$tag:app type \"$ins1\" is not $app

Cause: The specified tag is not QSP resource. This is an internal error.
134805 ERROR LK_ERROR:$tag:res type \"$ins2\" is not $res

Cause: The specified tag is not QSP resource. This is an internal error.
134823 ERROR LK_ERROR:$tag:tag \"$tag\" does not exist on server \"$me\"

Cause: The specified tag does not exist. This is an internal error.
134824 ERROR LK_ERROR:$tag:app type \"$ins1\" is not $app

Cause: The specified tag is not QSP resource. This is an internal error.
134825 ERROR LK_ERROR:$tag:res type \"$ins2\" is not $res

Cause: The specified tag is not QSP resource. This is an internal error.
134843 ERROR LK_ERROR:$tag:tag \"$tag\" does not exist

Cause: The specified tag does not exist. This is an internal error.
134844 ERROR LK_ERROR:$tag:app type \"$ins1\" is not $app

Cause: The specified tag is not QSP resource. This is an internal error.
134845 ERROR LK_ERROR:$tag:res type \"$ins2\" is not $res

Cause: The specified tag is not QSP resource. This is an internal error.
135999 ERROR -c $cmd

フィードバック

お役に立ちましたか?

はい いいえ
お役に立ちましたか
理由をお聞かせください
フィードバックありがとうございました

このトピックへフィードバック

送信