Search
Related topics are listed below.
Error Messages
Application Recovery Kits » Oracle Cloud Infrastructure Recovery Kit Administration Guide » Troubleshooting » Error Messages
For error messages that you may encounter with the Recovery Kit for Oracle Cloud Infrastructure, see the Recovery Kit for Oracle Cloud Infrastructure Message Catalog.
VMDK Error Messages
Application Recovery Kits » VMDK Shared Storage Recovery Kit Administration Guide » VMDK Troubleshooting » VMDK Error Messages
This section provides a list of messages that you may encounter while creating and extending a LifeKeeper VMDK resource hierarchy or removing and restoring a resource. Where appropriate, it provides an additional explanation of the cause of an error and necessary…
MQ Error Messages
Application Recovery Kits » WebSphere MQ Recovery Kit Administration Guide » WebSphere MQ Troubleshooting » MQ Error Messages
This section provides a list of messages that you may encounter with the use of the LifeKeeper MQ Recovery Kit. Where appropriate, it provides an additional explanation of the cause of an error and necessary action to resolve the error condition. Because the MQ…
NAS Error Messages
Application Recovery Kits » NAS Recovery Kit Administration Guide » NAS Troubleshooting » NAS Error Messages
*Note: LifeKeeper takes resources out of service from the top of the hierarchy and works its way down to the other resources. When taking resources out of h2. Error Messages This section provides a list of messages that you may encounter while creating and extending a…
Resource Error Recovery Scenario
LifeKeeper for Linux Technical Documentation » LifeKeeper » SIOS LifeKeeper for Linux Introduction » Fault Detection and Recovery Scenarios » Resource Error Recovery Scenario
LifeKeeper provides a real-time daemon monitor, lkcheck, to check the status and health of LifeKeeper-protected resources. For each in-service resource, lkcheck periodically calls the quickCheck script for that resource type. The quickCheck script performs a quick…
Error Detection and Notification
LifeKeeper for Linux Technical Documentation » LifeKeeper » LifeKeeper Administration Overview » Error Detection and Notification
The ability to provide detection and alarming for problems within an application is critical to building the best total fault resilient solution. Since every specific application varies on the mechanism and format of failures, no one set of generic mechanisms can be…
Common Samba Error Messages
Application Recovery Kits » Samba Recovery Kit Administration Guide » Samba Troubleshooting » Common Samba Error Messages
This section provides a list of messages that you may encounter with the use of the LifeKeeper Samba Recovery Kit. Where appropriate, it provides an additional explanation of the cause of an error and necessary action to resolve the error condition. Because the Samba…
Postfix Hierarchy Creation Error Messages
Application Recovery Kits » Postfix Recovery Kit Administration Guide » Postfix Troubleshooting » Postfix Hierarchy Creation Error Messages
Error Error Message No config path The Postfix configuration path was not found. Please enter the configuration path. main.cf not found in the configuration path The file main.cf does not exist in the path specified.…
Postfix Hierarchy Extend Error Messages
Application Recovery Kits » Postfix Recovery Kit Administration Guide » Postfix Troubleshooting » Postfix Hierarchy Extend Error Messages
Error Error Message postfix id does not match between servers The Postfix uid does not match on the servers in the cluster. Please set the same uid for the user “postfix” on the cluster servers. postdrop gid does not match…
inqfail error in the LifeKeeper Log
Application Recovery Kits » Oracle Recovery Kit Administration Guide » Oracle Troubleshooting » Oracle Known Issues and Restrictions » inqfail error in the LifeKeeper Log
If an inqfail error appears in your LifeKeeper error log following a failover, you will need to change the filesystemio setting. Note: The disk id and server name will be different for each configuration. To resolve this problem, you will need to change the setting…
SAP MaxDB Recovery Kit Error Messages
Application Recovery Kits » SAP MaxDB Recovery Kit Administration Guide » SAP MaxDB Troubleshooting » SAP MaxDB Recovery Kit Error Messages
Error Number Message 111000 Usage: %s independent_program_path 111001 Usage: %s %s %s 111002 No value specified to script %s for input argument %s. 111003 User %s with User_Key %s cannot…
Troubleshooting Sybase ASE Error During Resource Creation
Application Recovery Kits » Sybase ASE Recovery Kit Administration Guide » Troubleshooting Sybase ASE Error During Resource Creation
Sybase ASE Error During Resource Creation Symptom: Unable to create the resource instance during the resource creation Cause: If the instance is running, it could be because the profile is not located in the default $Sybase directory Solution: In…
SAP Error Messages During Failover or In-Service
Application Recovery Kits » SAP Recovery Kit Administration Guide » SAP Troubleshooting » SAP Error Messages During Failover or In-Service
After a failover of a SAP, there will be error messages in the SAP logs. Many of these error messages are normal and can be ignored. On Failure of the DB BVx: Work Process is in reconnect status – This error message simply states that a work progress has lost the…
Postfix Resource In-Service / Out-of-Service / Health Monitoring Error Messages
Application Recovery Kits » Postfix Recovery Kit Administration Guide » Postfix Troubleshooting » Postfix Resource In-Service / Out-of-Service / Health Monitoring Error Messages
Error Error Message Master process of postfix is not running The master process of Postfix is not running. Please check the Postfix error log. Failed in a check by postfix command Postfix command check option has failed.…
IP Kit Message Catalog
Search for an Error Code » Combined Message Catalog » IP Kit Message Catalog
Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen. Code Severity Message …
IP Recovery Kit (IPv4) Operations Overview
Application Recovery Kits » IP Recovery Kit Administration Guide » IP Recovery Kit (IPv4) Operations Overview
This operations overview uses the case of protecting IPv4 addresses as an example. Bringing a Resource In Service (restore) Checking protected IP addresses Check whether protected IP is a physical IP address. If the physical IP address is protected, the restore…
Recovery Kit for EC2 Message Catalog
Search for an Error Code » Combined Message Catalog » Recovery Kit for EC2 Message Catalog
The Recovery Kit for EC2 Message Catalog below contains listings of all messages that may be encountered while utilizing the Recovery Kit for EC2. The Combined Message Catalog provides a listing of all messages that may be encountered while using LifeKeeper for Linux…
Creating Links for ASE and OCS
Application Recovery Kits » Sybase ASE Recovery Kit Administration Guide » Appendix – Creating Device Spaces Using Raw I/O with Sybase ASE » Creating Links for ASE and OCS
The LifeKeeper for Linux Sybase ASE Recovery Kit requires that the path $SYBASE/ASE- be symbolically linked to $SYBASE/ASE. In addition, the path $SYBASE/OCS- must be symbolically linked to $SYBASE/OCS. The LifeKeeper for Linux Sybase ASE Recovery Kit uses these links…
Creating a Postfix Resource Hierarchy
Application Recovery Kits » Postfix Recovery Kit Administration Guide » Postfix Configuration Validation » LifeKeeper Configuration Tasks for Postfix » Creating a Postfix Resource Hierarchy
After you have completed the necessary setup tasks, use the following steps to define the Postfix resource hierarchy. IMPORTANT: The alias IP address should be under LifeKeeper protection before creating the Postfix resource instance. From the LifeKeeper GUI menu,…
IP Parameters List
Parameters List » IP Parameters List
The table below lists and explains names and meanings of the IP parameters. These values are tuned by editing the /etc/default/LifeKeeper configuration file. Parameter Name Meaning Setting Value Default Value When parameter takes effect…
Standby Node Health Check Parameters List
Parameters List » Standby Node Health Check Parameters List
It is necessary to enable/disable each functionality and configure the value for the Standby Node Health Check. These settings can be customized in the /etc/default/LifeKeeper configuration file. Parameter Description Value to Set Default…
Creating an Apache Web Server Resource Hierarchy
Application Recovery Kits » Apache Recovery Kit Administration Guide » LifeKeeper Configuration Tasks for Apache » Creating an Apache Web Server Resource Hierarchy
*IMPORTANT: Before you create your Web Server resource hierarchy, you must make sure that your Apache configuration file has included an existing LifeKeeper-protected IP resource. In a shared environment where the web documents and/or configuration files are on a…
Combined Message Catalog
Search for an Error Code » Combined Message Catalog
Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen. Code Severity Message Cause/Action …
Logical Volume Manager Troubleshooting
Application Recovery Kits » Logical Volume Manager Recovery Kit Administration Guide » Logical Volume Manager Troubleshooting
Error Messages This section provides a list of messages that you may encounter with the use of the Logical Volume Manager Recovery Kit. Where appropriate, it provides an additional explanation of the cause of an error and necessary action to resolve the error…
Quick Service Protection Kit Message Catalog
Search for an Error Code » Combined Message Catalog » Quick Service Protection Kit Message Catalog
Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen. Code Severity Message …
Apache Hierarchy Creation Errors
Application Recovery Kits » Apache Recovery Kit Administration Guide » Apache Web Server Troubleshooting » Apache Hierarchy Creation Errors
The error messages that might be displayed during the Apache hierarchy creation are listed below, along with a suggested explanation for each. Error messages displayed by the LifeKeeper core and by other recovery kits are not listed in this guide. Note that you may…
OSU Resource Monitoring
LifeKeeper for Linux Technical Documentation » LifeKeeper » Installation and Configuration » Standby Node Health Check » OSU Resource Monitoring
For each out-of-service (OSU) resource, lkcheck periodically calls the OSUquickCheck script for the resource. The OSUquickCheck script performs a quick health check for the resource. If it determines that the resource cannot start successfully, it changes the state of…
Apache Hierarchy Restore, Remove, and Recover Messages and Errors
Application Recovery Kits » Apache Recovery Kit Administration Guide » Apache Web Server Troubleshooting » Apache Hierarchy Restore, Remove, and Recover Messages and Errors
The following information and error messages are printed to the LifeKeeper error log. They may be viewed by typing “lk_log log”. Bringing an Apache Resource In Service (Restore) “LifeKeeper: RESTORE: APACHE: RESTORING $TAG TO SERVICE START AT:…
Oracle PDB Kit Message Catalog
Search for an Error Code » Combined Message Catalog » Oracle PDB Kit Message Catalog
Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen. Code Severity Message …
Quorum Message Catalog
Search for an Error Code » Combined Message Catalog » Quorum Message Catalog
Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen. Code Severity Message Cause/Action …
Oracle Listener Kit Message Catalog
Search for an Error Code » Combined Message Catalog » Oracle Listener Kit Message Catalog
Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen. Code Severity Message …
Postfix Troubleshooting
Application Recovery Kits » Postfix Recovery Kit Administration Guide » Postfix Troubleshooting
This section provides a list of messages that you may encounter during the process of creating, extending, removing and restoring a LifeKeeper Postfix hierarchy, and, where appropriate, provides additional explanation of the cause of the errors and necessary action to…
Recovery Kit for Oracle Cloud Infrastructure Message Catalog
Search for an Error Code » Combined Message Catalog » Recovery Kit for Oracle Cloud Infrastructure Message Catalog
Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen. For a complete list of all the messages you may encounter while using LifeKeeper for Linux, please refer to the…
Recovery Kit for EC2™ Troubleshooting
Application Recovery Kits » Recovery Kit for EC2™ Administration Guide » Recovery Kit for EC2™ Troubleshooting
The Message Catalog provides a list of all messages that may be encountered while using LifeKeeper for Linux and, where appropriate, provides additional explanation of the cause of the errors and necessary action to resolve the error condition. This full listing may be…
Apache Web Server Troubleshooting
Application Recovery Kits » Apache Recovery Kit Administration Guide » Apache Web Server Troubleshooting
This section provides a list of messages that you may encounter during the process of creating and extending a LifeKeeper Apache Web Server resource hierarchy, removing and restoring a resource, and, where appropriate, provides additional explanation of the cause of…
PostgreSQL Troubleshooting
Application Recovery Kits » PostgreSQL Recovery Kit Administration Guide » PostgreSQL Troubleshooting
This section provides a list of messages that you may encounter while creating and extending a LifeKeeper PostgreSQL resource hierarchy or removing and restoring a resource. Where appropriate, it provides an additional explanation of the cause of an error and necessary…
DB2 Kit Message Catalog
Search for an Error Code » Combined Message Catalog » DB2 Kit Message Catalog
Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen. Code Severity Message …
File System Kit Message Catalog
Search for an Error Code » Combined Message Catalog » File System Kit Message Catalog
Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen. Code Severity Message …
Oracle Kit Message Catalog
Search for an Error Code » Combined Message Catalog » Oracle Kit Message Catalog
Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen. Code Severity Message …
NFS Troubleshooting
Application Recovery Kits » NFS Server Recovery Kit Administration Guide » NFS Troubleshooting
This section provides a list of messages that you may encounter while creating and extending a LifeKeeper NFS resource hierarchy or removing and restoring a resource. Where appropriate, it provides an additional explanation of the cause of an error and necessary action…
GUI Message Catalog
Search for an Error Code » Combined Message Catalog » GUI Message Catalog
Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen. …
SCSI Kit Message Catalog
Search for an Error Code » Combined Message Catalog » SCSI Kit Message Catalog
Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen. Code Severity Message …
Oracle Troubleshooting
Application Recovery Kits » Oracle Recovery Kit Administration Guide » Oracle Troubleshooting
The Oracle Recovery Message Catalog below contains listings of all messages that may be encountered while utilizing the Oracle kit. The Combined Message Catalog provides a listing of all messages that may be encountered while using LifeKeeper for Linux and, where…
WebSphere MQ Troubleshooting
Application Recovery Kits » WebSphere MQ Recovery Kit Administration Guide » WebSphere MQ Troubleshooting
WebSphere MQ Log Locations If the queue manager name is known and the queue manager is available, WebSphere MQ error logs are located in the directory specified by the LogPath parameter defined in the queue manager configuration file qm.ini. If the queue manager is…
NFS Hierarchy Creation Errors
Application Recovery Kits » NFS Server Recovery Kit Administration Guide » NFS Troubleshooting » NFS Hierarchy Creation Errors
The error messages that might be displayed during the NFS hierarchy creation are listed below, along with a suggested explanation for each. The messages listed cover both the creation of the nfs and hanfs resources. Error messages displayed by the LifeKeeper core and…
SAP Troubleshooting
Application Recovery Kits » SAP Recovery Kit Administration Guide » SAP Troubleshooting
This section provides a list of messages that you may encounter during the process of creating and extending a LifeKeeper SAP resource hierarchy, removing and restoring a resource and, where appropriate, provides additional explanation of the cause of the errors and…
Apache Extend Hierarchy Errors
Application Recovery Kits » Apache Recovery Kit Administration Guide » Apache Web Server Troubleshooting » Apache Extend Hierarchy Errors
The error messages that might be displayed during Apache hierarchy extension are listed below, along with a suggested explanation for each. Note that these error messages appear when the GUI indicates it is “Executing the pre-extend script….” to validate the…
New Features
LifeKeeper Web Management Console (LKWMC) » LifeKeeper Web Management Console (LKWMC) Release Notes » New Features
Component Feature New in Version 1.3.2 General To enhance security, several libraries used internally have been updated to their latest versions. New in Version 1.3.1 General Improved security headers…
Gen/App Kit Message Catalog
Search for an Error Code » Combined Message Catalog » Gen/App Kit Message Catalog
Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen. Code Severity Message Cause/Action …
SAP Message Catalog
Search for an Error Code » Combined Message Catalog » SAP Message Catalog
Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen. Code Severity Message …
DRBD Kit Message Catalog
Search for an Error Code » Combined Message Catalog » DRBD Kit Message Catalog
Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen. Code Severity Message …
DMMP Kit Message Catalog
Search for an Error Code » Combined Message Catalog » DMMP Kit Message Catalog
Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen. Code Severity Message …
NFS Resource Hierarchy Restore, Remove, quickCheck and Recover Messages and Errors
Application Recovery Kits » NFS Server Recovery Kit Administration Guide » NFS Troubleshooting » NFS Resource Hierarchy Restore, Remove, quickCheck and Recover Messages and Errors
Bringing an NFS Resource In‑Service (Restore) Error Number Error Message Description 106003 restore: Unable to create the export entry file for “EXPORT POINT” in LifeKeeper Possible causes: File system is full of…
DataKeeper Kit Message Catalog
Search for an Error Code » Combined Message Catalog » DataKeeper Kit Message Catalog
Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen. Code Severity Message Cause/Action …
Apache Recovery Kit Operations Overview
Application Recovery Kits » Apache Recovery Kit Administration Guide » Apache Recovery Kit Operations Overview
Bringing a Resource In Service (restore) Start the Apache resource in the following order: Use the httpd command’s -t option to perform a syntax check on the configuration file. If there is a syntax error, the process exits with an error. Determine…
SAP HANA Recovery Kit Message Catalog
Search for an Error Code » Combined Message Catalog » SAP HANA Recovery Kit Message Catalog
Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen. Code Severity Message Cause/Action …
MySQL Troubleshooting
Application Recovery Kits » Recovery Kit for MySQL Administration Guide » MySQL Troubleshooting
Common Error Messages This section provides a list of messages that you may encounter while creating and extending a LifeKeeper MySQL resource hierarchy or removing and restoring a resource. Where appropriate, it provides an additional explanation of the cause of an…
Restore
Application Recovery Kits » Samba Recovery Kit Administration Guide » Samba Troubleshooting » Restore
Error Number Error Message Description 109027 Failed start of smbd as daemon process. The attempt to start smbd as a daemon failed. Check the Samba log files for additional information. 109028 Failed start of nmbd…
WebSphere MQ – Known Issues / Restrictions
LifeKeeper for Linux Technical Documentation » LifeKeeper » Troubleshooting » Known Issues and Restrictions » WebSphere MQ – Known Issues / Restrictions
Description Error when lksupport command is executed: The following error can be output when lksupport command is executed in the case MQ queue manager protected by MQ RK is set on the disk shared by NFS. cat: /mqm/qmgrs/tkqmgr/qm.ini: Operation…
Remove
Application Recovery Kits » Samba Recovery Kit Administration Guide » Samba Troubleshooting » Remove
Error Number Error Message Description 109033 Failed start of smbd as daemon process. Attempting to stop via SIGKILL. The normal termination of the smbd daemon process failed so the daemon will be forcibly terminated. …
LifeKeeper GUI Related Errors
Application Recovery Kits » NAS Recovery Kit Administration Guide » NAS Troubleshooting » LifeKeeper GUI Related Errors
Error Number Error Message 104901 The mount point %s is mounted Action: Please specify a mount point that is not mounted. 104902 The mount point %s is not an absolute path Action: Please specify a mount point that…
Recovery Kit for Route 53™ Operations Overview
Application Recovery Kits » Recovery Kit for Route 53™ Administration Guide » Recovery Kit for Route 53™ Operations Overview
Each procedure is performed through the AWS CLI provided by Amazon Web Services. Bringing a Resource In Service (restore) Use the following command to get the IP address configured in the Route 53 A record with the AWS CLI. # aws --output text…
NFS Resource Extend Hierarchy Errors
Application Recovery Kits » NFS Server Recovery Kit Administration Guide » NFS Troubleshooting » NFS Resource Extend Hierarchy Errors
The error messages that might be displayed during NFS hierarchy extension are listed below, along with a suggested explanation for each. Note that these error messages appear when the GUI indicates it is “Executing the pre-extend script….” to validate the…
Using Network Attached Storage
Application Recovery Kits » Recovery Kit for MySQL Administration Guide » Recovery Kit for MySQL Configuration » Using Network Attached Storage
There are a couple of special considerations to take into account when configuring LifeKeeper to use an NFS file server (Network Attached Storage) as cluster storage. Use the NAS Recovery Kit The optional Network Attached Storage (NAS) recovery kit is required when…
Hierarchy Extension
Application Recovery Kits » Samba Recovery Kit Administration Guide » Samba Troubleshooting » Hierarchy Extension
Error Number Error Message Description 109008 Replication of config file to target server “ServerB” failed. The “mkdir” of “/etc/samba/config_files” failed. Or Replication of config file to…
SAP HANA Troubleshooting
Application Recovery Kits » SAP HANA Recovery Kit Administration Guide » SAP HANA Troubleshooting
The Message Catalog provides a list of all messages that may be encountered while using LifeKeeper for Linux and, where appropriate, provides additional explanation of the cause of the errors and necessary action to resolve the error condition. This full listing may be…
LB Health Check Message Catalog
Search for an Error Code » Combined Message Catalog » LB Health Check Message Catalog
Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen. For a complete list of all the messages you may encounter while using LifeKeeper for Linux, please refer to the…
DRBD for Linux Troubleshooting
LifeKeeper for Linux Technical Documentation » Data Replication » DRBD Recovery Kit » DRBD for Linux Troubleshooting
This section provides information regarding issues that may be encountered with the use of DRBD Recovery Kit. Where appropriate, additional explanation of the cause of an error is provided along with necessary action to resolve the error condition. Messages specific…
NFS Resource Hierarchy Delete Messages and Errors
Application Recovery Kits » NFS Server Recovery Kit Administration Guide » NFS Troubleshooting » NFS Resource Hierarchy Delete Messages and Errors
Error Number Error Message Description 106015 Unable to restore the entry for export point “EXPORT POINT” in /etc/exports on server “SERVER” Restore the entry manually. 106021 An entry for…
SAP Hierarchy Restore Errors
Application Recovery Kits » SAP Recovery Kit Administration Guide » SAP Troubleshooting » SAP Hierarchy Restore Errors
Symptom: When attempting to bring an SAP resource hierarchy which does not contain a dependent file system resource back in-service on a previous host node, the in-service (restore) of the SAP resource fails. Messages similar to the following appear in the SAP…
SNMP Troubleshooting
LifeKeeper for Linux Technical Documentation » LifeKeeper » Installation and Configuration » LifeKeeper Event Forwarding via SNMP » SNMP Troubleshooting
Following are some possible problems and solutions related to SNMP Event Forwarding. For specific error messages, see the LifeKeeper Message Catalog. Problem: No SNMP trap messages are sent from LifeKeeper. Solution: Verify that the snmptrap utility is installed on…
Email Notification Troubleshooting
LifeKeeper for Linux Technical Documentation » LifeKeeper » Installation and Configuration » LifeKeeper Event Email Notification » Email Notification Troubleshooting
Following are some possible problems and solutions related to email notification of LifeKeeper events. For specific error messages, see the LifeKeeper Message Catalog. Problem: No email messages are received from LifeKeeper. Solution: Verify that the mail utility is…
Incomplete Resource Priority Modification
LifeKeeper for Linux Technical Documentation » LifeKeeper » Troubleshooting » Incomplete Resource Priority Modification
A hierarchy in LifeKeeper is defined as all resources associated by parent/child relationships. For resources that have multiple parents, it is not always easy to discern from the GUI all of the root resources for a hierarchy. In order to maintain consistency in a…
PostgreSQL General Tips
Application Recovery Kits » PostgreSQL Recovery Kit Administration Guide » PostgreSQL Troubleshooting » PostgreSQL General Tips
The following error messages and conditions may be encountered while using the recovery kit. Error Solution Unable to protect PostgreSQL database using the same port as another LK protected PostgreSQL database. Verify the version of…
Recovery Kit for Route 53™ Troubleshooting
Application Recovery Kits » Recovery Kit for Route 53™ Administration Guide » Recovery Kit for Route 53™ Troubleshooting
The Message Catalog provides a listing of all messages that may be encountered while using LifeKeeper for Linux and, where appropriate, provides additional explanation of the cause of the errors and necessary action to resolve the error condition. This full listing may…
tset Errors Appear in the LifeKeeper Log File
Application Recovery Kits » SAP Recovery Kit Administration Guide » tset Errors Appear in the LifeKeeper Log File
Cause: The su commands used by the SAP and Database Recovery Kits cause a ‘tset’ error message to be output to the LK log that appears as follows: tset: standard error: Invalid argument This error comes from one of the profile files in the SAP…
Resource Monitoring
Application Recovery Kits » Samba Recovery Kit Administration Guide » Samba Troubleshooting » Resource Monitoring
Error Number Error Message Description 109031 Connection attempt to smbd daemon on address “100.25.104.26” failed. The health check of the smbd daemon process failed when a connection attempt on the listed IP address…
Configuring the Oracle Net Listener for LifeKeeper Protection
Application Recovery Kits » Oracle Recovery Kit Administration Guide » Configuring Oracle with LifeKeeper » Configuring the Oracle Net Listener for LifeKeeper Protection
If your Oracle database will have remote client connections, you will want to protect the Oracle Listener in addition to the Oracle database server. Please refer to the Oracle documentation for information on using Oracle network configuration utilities to create…
Troubleshooting
LifeKeeper for Linux Technical Documentation » LifeKeeper » Troubleshooting
The Message Catalog provides a listing of all error codes, including operational, administrative and GUI, that may be encountered while using LifeKeeper for Linux and, where appropriate, provides additional explanation of the cause of the error code and necessary…
LifeKeeper Alarming and Recovery
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » Advanced Tasks » LCM » LifeKeeper Alarming and Recovery
LifeKeeper error detection and notification is based on the event alarming mechanism, sendevent. The key concept of the sendevent mechanism is that independent applications can register to receive alarms for critical components. Neither the alarm initiation component…
Fault Detection and Recovery Scenarios
LifeKeeper for Linux Technical Documentation » LifeKeeper » SIOS LifeKeeper for Linux Introduction » Fault Detection and Recovery Scenarios
To demonstrate how the various LifeKeeper components work together to provide fault detection and recovery, see the following topics that illustrate and describe three types of recovery…
SAP HANA GUI States
Application Recovery Kits » SAP HANA Recovery Kit Administration Guide » SAP HANA Recovery Kit Overview » SAP HANA GUI States
The active (ISP) resource can have the following states. Some of these warning and failure states are transient and may appear while LifeKeeper is attempting to recover required processes or before LifeKeeper initiates a failover of the HANA resource…
Sybase ASE – Known Issues / Restrictions
LifeKeeper for Linux Technical Documentation » LifeKeeper » Troubleshooting » Known Issues and Restrictions » Sybase ASE – Known Issues / Restrictions
Description User Name/Password Issues: If the default user name is password-protected, the create UI does not detect this until after all validation is complete When creating the Sybase resource, you are prompted to enter the user name. The…
Postfix Configuration Validation
Application Recovery Kits » Postfix Recovery Kit Administration Guide » Postfix Configuration Validation
This section shows a method to check the systems by using the Typical LifeKeeper Postfix Environment 1 as an example before you start to create resources in LifeKeeper. Postfix Configuration Validation Steps Postfix Configuration The Postfix configuration files…
Creating a Samba Resource Hierarchy
Application Recovery Kits » Samba Recovery Kit Administration Guide » LifeKeeper Configuration Tasks for Samba » Creating a Samba Resource Hierarchy
After you have completed the necessary setup tasks, use the following steps to define the Samba resource hierarchy. From the LifeKeeper GUI menu, select Edit, then Server. From the menu, select Create Resource Hierarchy. The Create Resource Wizard dialog box will…
DB2 – Known Issues / Restrictions
LifeKeeper for Linux Technical Documentation » LifeKeeper » Troubleshooting » Known Issues and Restrictions » DB2 – Known Issues / Restrictions
Description DB2 Recovery Kit reports unnecessary error If DB2 is installed on a shared disk, the following message may be seen when extending a DB2 resource. LifeKeeper was unable to add instance “%s” and/or its variables to the…
Updating the Oracle Listener Recovery Level
Application Recovery Kits » Oracle Recovery Kit Administration Guide » Oracle Appendix » Creating an Oracle Listener for Multiple Resources » Updating the Oracle Listener Recovery Level
Select a listener and then the button from the Resource toolbar to update the recovery level of the resource. Enter the following information. Field Tips Listener Recovery Level Select the level of recovery for the specified…
Configuration File Synchronization Utility
Application Recovery Kits » Samba Recovery Kit Administration Guide » Samba Troubleshooting » Configuration File Synchronization Utility
Error Number Error Message Description 109013 The hierarchy for the specified configuration file does not have an equivalency with the target system. Select another target system or configuration file. The -t TargetSys argument to…
LVM Recovery Kit Operations Overview
Application Recovery Kits » Logical Volume Manager Recovery Kit Administration Guide » LVM Recovery Kit Operations Overview
Create a file system resource that includes LVM creates the following resource hierarchy: [filesys] └[lvmlv] └[lvmvg] └[device] └[disk] Bringing a Resource In Service (restore) [lvmlv] Resource Execute the following command to activate…
Install the Sybase ASE Software
Application Recovery Kits » Sybase ASE Recovery Kit Administration Guide » Installing and Configuring Sybase ASE with LifeKeeper » Install the Sybase ASE Software
Install the Sybase ASE software on all servers in the cluster using identical parameters/settings. Refer to the Installation Guide Adaptive Server for Linux for details. The following are additional recommendations to ensure that LifeKeeper will work with Sybase…
Multipath Recovery Kits (DMMP / HDLM / PPATH /NECSPS) Known Issues / Restrictions
LifeKeeper for Linux Technical Documentation » LifeKeeper » Troubleshooting » Known Issues and Restrictions » Multipath Recovery Kits (DMMP / HDLM / PPATH /NECSPS) Known Issues / Restrictions
Description Multipath Recovery Kits (DMMP / HDLM / PPATH / NECSPS): Registration conflict error occurs on lkstop when resource OSF The multipath recovery kits (DMMP, HDLM, PPATH, NECSPS) can have a system halt occur on the active (ISP) node when…
Using mysqld Groups with LifeKeeper
Application Recovery Kits » Recovery Kit for MySQL Administration Guide » Recovery Kit for MySQL Configuration » Using mysqld Groups with LifeKeeper
*When systemd support for MySQL is installed, systemd can manage multiple MySQL instances. Consequently, the mysqld_multi utility is not installed. For details, refer to Considerations when using systemd support for MySQL. The MySQL Application Recovery Kit supports…
DataKeeper for Linux Troubleshooting
LifeKeeper for Linux Technical Documentation » Data Replication » DataKeeper » DataKeeper for Linux Troubleshooting
This section provides information regarding issues that may be encountered with the use of DataKeeper for Linux. Where appropriate, additional explanation of the cause of an error is provided along with necessary action to resolve the error condition. Messages…
Using Network Attached Storage with Sybase ASE
Application Recovery Kits » Sybase ASE Recovery Kit Administration Guide » Sybase ASE Recovery Kit Configuration Considerations » Using Network Attached Storage with Sybase ASE
There are a couple of special considerations to take into account when configuring LifeKeeper to use an NFS file server (Network Attached Storage) as cluster storage. Use the NAS Recovery Kit The optional Network Attached Storage (NAS) Recovery Kit is required when…
LKCLI Mirror Administration
LifeKeeper for Linux Technical Documentation » Data Replication » DRBD Recovery Kit » Administering SIOS DRBD for Linux » LKCLI Mirror Administration
lkcli drbd *Note: lkcli drbd command requires DRBD and the DRBD Recovery Kit to be installed. lkcli drbd changeip --oldip --newip [--tag ] Option Default Description --oldip The old ipv4 address…
Changing Replication and Operation Modes
Application Recovery Kits » SAP HANA Recovery Kit Administration Guide » SAP HANA Resource Hierarchy Administration » Changing Replication and Operation Modes
!While the replication and operation modes may be changed for the secondary replication site, the user should never perform a manual takeover or switchover of SAP HANA System Replication outside of LifeKeeper. Doing so will result in an error state in which the SAP…
Replicate Existing File System
LifeKeeper for Linux Technical Documentation » Data Replication » DataKeeper » Resource Configuration Tasks » Creating a DataKeeper Resource Hierarchy » Replicate Existing File System
This option will unmount a currently mounted file system on a local disk or partition, create a NetRAID device, then re-mount the file system on the NetRAID device. Both the NetRAID device and the mounted file system are placed under LifeKeeper protection. You should…
SAP MaxDB Troubleshooting
Application Recovery Kits » SAP MaxDB Recovery Kit Administration Guide » SAP MaxDB Troubleshooting
General Tips The following error messages may be encountered while using the SAP MaxDB Recovery Kit. Error Message Solution The tunable MAXDB_ILB_ENABLED is set in the LifeKeeper defaults file for Internal Load Balancer support. Protecting…
IPv6 – Known Issues / Restrictions
LifeKeeper for Linux Technical Documentation » LifeKeeper » Troubleshooting » Known Issues and Restrictions » IPv6 – Known Issues / Restrictions
Description SIOS has migrated to the use of the ip command and away from the ifconfig command. Because of this change, customers with external scripts are advised to make a similar change. Instead of issuing the ifconfig command and parsing the…