Search
Related topics are listed below.
Running the GUI on a LifeKeeper Server
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » GUI » Preparing to Run the GUI » Running the GUI on a LifeKeeper Server
The simplest way to run the LifeKeeper GUI is as an application on a LifeKeeper server. By doing so you are, in effect, running the GUI client and server on the same system. After configuring the LifeKeeper server for GUI Administration, you can run the GUI as an…
Running the LifeKeeper GUI Through a Firewall
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » Maintenance Tasks » Running the LifeKeeper GUI Through a Firewall
In some situations, a LifeKeeper cluster is placed behind a corporate firewall and administrators wish to run the LifeKeeper GUI from a remote system outside the firewall. LifeKeeper uses Remote Method Invocation (RMI) to communicate between the GUI server and client.…
Configuring the LifeKeeper GUI
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » GUI » Preparing to Run the GUI » Configuring the LifeKeeper GUI
Installing the LifeKeeper Server for GUI Administration Perform the following steps for each LifeKeeper server. Each step contains references or links for more detailed instructions. You must install the Java Runtime Environment (JRE) or Java Software Development…
Viewing LifeKeeper GUI Server Processes
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » Common Tasks » Viewing LifeKeeper GUI Server Processes
To verify that the LifeKeeper GUI Server is running, type the following command: ps -ef | grep runGuiSer You should see output similar to the following: root 2805 1 0 08:24 ? 00:00:00 sh /opt/LifeKeeper/bin/runGuiServer To see a list of the other GUI Server daemon…
Running LifeKeeper With a Firewall
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » Maintenance Tasks » Running LifeKeeper With a Firewall
LifeKeeper for Linux can work with a firewall in place on the same server if you address the following network access requirements. *Note: If you wish to change or disable your firewall, please follow the procedure recommended by your OS distribution. LifeKeeper…
Performing a Manual Switchover from the LifeKeeper GUI
Application Recovery Kits » PostgreSQL Recovery Kit Administration Guide » PostgreSQL Administration » Performing a Manual Switchover from the LifeKeeper GUI
You can initiate a manual switchover from the LifeKeeper GUI by selecting Edit, Resource, and In Service. For example, an in-service request executed on a backup server causes the PostgreSQL resource hierarchy to be placed in service on the backup server and taken…
Lifekeeper GUI Overview
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » GUI » Preparing to Run the GUI » Lifekeeper GUI Overview
The LifeKeeper GUI uses Java technology to provide a graphical status interface to LifeKeeper and its configuration data. The LifeKeeper GUI allows users working on any machine to administer, operate, or monitor servers and resources in any cluster, as long as they…
Installation on the Backup Server
Application Recovery Kits » SAP Recovery Kit Administration Guide » SAP Installation » Installation on the Backup Server
On the backup server, repeat the Installation procedures that were performed on the primary server: Install the Core Services, ABAP and Java Central Services Install the Database Install the Application Services
Starting and Stopping the GUI Server
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » GUI » Preparing to Run the GUI » Starting and Stopping the GUI Server
To Start the LifeKeeper GUI Server If the LifeKeeper GUI Server is not running, type the following command as root: /opt/LifeKeeper/bin/lkGUIserver start This command starts all LifeKeeper GUI Server daemon processes on the server being administered if they are not…
LifeKeeper GUI Related Errors
Application Recovery Kits » NAS Recovery Kit Administration Guide » NAS Troubleshooting » LifeKeeper GUI Related Errors
Error Number Error Message 104901 The mount point %s is mounted Action: Please specify a mount point that is not mounted. 104902 The mount point %s is not an absolute path Action: Please specify a mount point that…
LifeKeeper GUI Software Package
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » GUI » GUI Overview – General » LifeKeeper GUI Software Package
The LifeKeeper GUI is included in the steeleye-lkGUI software package which is bundled with the LifeKeeper Core Package Cluster. The steeleye-lkGUI package: Installs the LifeKeeper GUI Client in Java archive format. Installs the LifeKeeper GUI…
Recovering from a LifeKeeper Server Failure
LifeKeeper for Linux Technical Documentation » LifeKeeper » Troubleshooting » Recovering from a LifeKeeper Server Failure
If any server in your LifeKeeper cluster experiences a failure that causes re-installation of the operating system (and thus LifeKeeper), you will have to re-extend the resource hierarchies from each server in the cluster. If any server in the cluster has a shared…
Exiting the GUI
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » Exiting the GUI
Select Exit from the File Menu to disconnect from all servers and close the GUI window.
Installing the LifeKeeper Single Server Protection Software
LifeKeeper Single Server Protection » LifeKeeper Single Server Protection for Linux Installation Guide » Installing the LifeKeeper Single Server Protection Software
This document will guide you through the installation of the LifeKeeper Single Server Protection Software (SSP) and assumes the user has basic knowledge of the Linux operating system. Please refer to the LifeKeeper Single Server Protection Software for Linux product…
Performing a Manual Switchover from the GUI
Application Recovery Kits » MySQL Recovery Kit Administration Guide » MySQL Administration » Performing a Manual Switchover from the GUI
You can test your MySQL resource hierarchy by initiating a manual switchover. This will simulate a failover of a resource instance from the primary server to the backup server. Performing a Manual Switchover from the GUI You can initiate a manual switchover from the…
LifeKeeper Single Server Protection
LifeKeeper Single Server Protection
LifeKeeper Single Server Protection Release Notes LifeKeeper Single Server Protection for Linux Installation Guide
Viewing the Status of a Server
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » Common Tasks » Viewing the Status of a Server
The state of a server can be determined by looking at the graphic representation of the server in the table’s header as shown below. Server State Visual state What it Means ALIVE Client has valid connection to the…
Upgrading the OS / Kernel on a node with LifeKeeper (OS Patching)
LifeKeeper for Linux Installation Guide » Upgrading the OS / Kernel on a node with LifeKeeper (OS Patching)
!In addition to performing a backup of our product, SIOS recommends that before initiating an OS patch on a virtual machine, please perform a snapshot/backup of the entire system(s) in case an updated system needs to be restored to an earlier date/time. For additional…
Running DB2
Application Recovery Kits » DB2 Recovery Kit Administration Guide » Configuring the LifeKeeper for Linux DB2 Recovery Kit » Running DB2
Reducing the DB2 Process Startup Times In some instances the startup times of the DB2 processes can be excessive when using DB2 8.x under LifeKeeper protection. Making the following change to the kernel network parameters can improve this situation. Add the following…
Maintaining a LifeKeeper Single Server Protection Protected System
LifeKeeper Single Server Protection » LifeKeeper Single Server Protection for Linux Technical Documentation » Administration » Enabled VMware HA Fault Detection and Recovery Scenario » Maintaining a LifeKeeper Single Server Protection Protected System
When performing system or application maintenance on a LifeKeeper Single Server Protection-protected server, you should either stop LifeKeeper Single Server Protection monitoring or place the protected resources into maintenance mode. This will stop LifeKeeper Single…
GUI
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » GUI
The GUI components should have already been installed as part of the LifeKeeper Core installation. ___________________________________________________________________________________________________________________________________________________ GUI Overview…
Configuring NFS Server with LifeKeeper
Application Recovery Kits » NFS Server Recovery Kit Administration Guide » NFS Server Recovery Kit Configuration Considerations » Configuring NFS Server with LifeKeeper
This section contains information to consider before starting to configure and administer the NFS Server Recovery Kit as well as examples of typical LifeKeeper NFS configurations. Please refer to LifeKeeper for Linux Technical Documentation for instructions on…
Preparing to Run the GUI
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » GUI » Preparing to Run the GUI
Overview Configuration Starting and Stopping the GUI Server Java Security Policy Running the GUI on a LifeKeeper Server
Verifying the LifeKeeper Installation
LifeKeeper for Linux Installation Guide » Verifying the LifeKeeper Installation
You can verify that the LifeKeeper packages were installed correctly by entering the following at the command line: rpm -V *Note: If the package is installed correctly, no output will be displayed by this command. To perform a query from the command line, type rpm…
Install the LifeKeeper Software
Application Recovery Kits » SAP MaxDB Recovery Kit Administration Guide » Configuring SAP MaxDB with LifeKeeper » Install the LifeKeeper Software
Once you have installed the SAP MaxDB software, created your database and created the User_Key, you are ready to install the LifeKeeper Core software and any required patches followed by the SAP Max DB Recovery Kit. Also, if you plan to use SAP MaxDB with raw devices,…
Install the LifeKeeper Software
Application Recovery Kits » SAP HANA Recovery Kit Administration Guide » Configuring SAP HANA with LifeKeeper » Install the LifeKeeper Software
Once you have installed the SAP HANA software and configured SAP HANA System Replication, you are ready to install the LifeKeeper Core software and any required patches followed by the SAP HANA Recovery Kit. Refer to the LifeKeeper for Linux Installation Guide for…
Install the LifeKeeper Software
Application Recovery Kits » PostgreSQL Recovery Kit Administration Guide » PostgreSQL Installation » Install the LifeKeeper Software
Once you have installed the PostgreSQL software and created your database, you are ready to install the LifeKeeper Core software and any required patches followed by the PostgreSQL Recovery Kit. Refer to the LifeKeeper for Linux Installation Guide for details on…
Tuning the LifeKeeper Heartbeat
LifeKeeper for Linux Technical Documentation » LifeKeeper » Installation and Configuration » Optional Configuration Tasks » Tuning the LifeKeeper Heartbeat
Overview of the Tunable Heartbeat The LifeKeeper heartbeat is the signal sent between LifeKeeper servers over the communications path(s) to ensure each server is “alive”. There are two aspects of the heartbeat that determine how quickly LifeKeeper detects…
Configuring Apache Web Server with LifeKeeper
Application Recovery Kits » Apache Recovery Kit Administration Guide » Configuring Apache Web Server with LifeKeeper
This section contains definitions and examples of typical LifeKeeper Apache Web Server configurations and information you should consider before you start to configure Apache Web Server. Please refer to the LifeKeeper for Linux Technical Documentation for instructions…
About LifeKeeper Single Server Protection Licensing
LifeKeeper Single Server Protection » LifeKeeper Single Server Protection for Linux Installation Guide » About LifeKeeper Single Server Protection Licensing
LifeKeeper Single Server Protection requires a unique license for each server. The license is a run-time license, which means that you can install LifeKeeper Single Server Protection without it, but the license must be installed before you can successfully start and…
Verifying LifeKeeper Single Server Protection Installation
LifeKeeper Single Server Protection » LifeKeeper Single Server Protection for Linux Installation Guide » Verifying LifeKeeper Single Server Protection Installation
You can verify that the LifeKeeper Single Server Protection packages were installed correctly by entering the following at the command line: rpm -V Note: If the package is installed correctly, no output will be displayed by this command. To perform a query from the…
GUI Toolbar
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » GUI » Toolbars » GUI Toolbar
This toolbar is a combination of the default server and resource context toolbars which are displayed on the properties panel except that you must select a server and possibly a resource when you invoke actions from this toolbar. Connect. Connect…
Changing the Server Connection Channel
Application Recovery Kits » WebSphere MQ Recovery Kit Administration Guide » LifeKeeper Configuration Tasks for MQ » Editing MQ Configuration Resource Properties » Changing the Server Connection Channel
GUI First navigate to the WebSphere MQ resource properties panel or the resource context menu described above. The resource must be in service to modify the Server Connection Channel value. Then click on Server Connection Channel Configuration icon or menu item. The…
Maintaining a LifeKeeper Protected System
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » Maintenance Tasks » Maintaining a LifeKeeper Protected System
When performing shutdown and maintenance on a LifeKeeper-protected server, you must put that system’s resource hierarchies in service on the backup server before performing maintenance. This process stops all activity for shared disks on the system needing…
LifeKeeper Single Server Protection for Linux Introduction
LifeKeeper Single Server Protection » LifeKeeper Single Server Protection for Linux Introduction
LifeKeeper Single Server Protection (SSP) allows for application monitoring in a single node configuration (i.e., no cluster requirements or restraints). Single node environments may be physical or virtual (vSphere, KVM, Amazon EC2). LifeKeeper SSP is built on the…
SYS – LifeKeeper Commands Related to the Systems in the LifeKeeper Cluster
LifeKeeper for Linux Technical Documentation » Command Line Interface » Commands » SYS – LifeKeeper Commands Related to the Systems in the LifeKeeper Cluster
sys_list – Lists out the systems known to a particular LifeKeeper node Options: -d sys_create – Creates knowledge of another system on LifeKeeper node Options: -s -d sys_remove – Removes knowledge of another system on a LifeKeeper…
LifeKeeper
LifeKeeper for Linux Technical Documentation » LifeKeeper
The following LifeKeeper product documentation is available from the SIOS Technology Corp. website: LifeKeeper for Linux Release Notes LifeKeeper for Linux Technical Documentation Optional Recovery Kit Documentation
Changing the Command Server Protection Configuration
Application Recovery Kits » WebSphere MQ Recovery Kit Administration Guide » LifeKeeper Configuration Tasks for MQ » Editing MQ Configuration Resource Properties » Changing the Command Server Protection Configuration
GUI First navigate to the WebSphere MQ Resource Properties Panel or the Resource Context Menu described above. Then click on Command Server Protection Configuration icon or menu item. The following dialog will appear: Select Full Control of the command server…
inqfail error in the LifeKeeper Log
Application Recovery Kits » Oracle Recovery Kit Administration Guide » Oracle Troubleshooting » Oracle Known Issues and Restrictions » inqfail error in the LifeKeeper Log
If an inqfail error appears in your LifeKeeper error log following a failover, you will need to change the filesystemio setting. Note: The disk id and server name will be different for each configuration. To resolve this problem, you will need to change the setting…
Changing the LifeKeeper Test Queue Name
Application Recovery Kits » WebSphere MQ Recovery Kit Administration Guide » LifeKeeper Configuration Tasks for MQ » Editing MQ Configuration Resource Properties » Changing the LifeKeeper Test Queue Name
GUI First navigate to the WebSphere MQ Resource Properties Panel or the Resource Context Menu described above. Then click on PUT/GET TESTQUEUE Configuration icon or menu item. The following dialog will appear: Now enter the name of the LifeKeeper test queue and…
Using Certificates with the LifeKeeper API
LifeKeeper for Linux Technical Documentation » LifeKeeper » Installation and Configuration » Optional Configuration Tasks » Using Certificates with the LifeKeeper API
The LifeKeeper API uses SSL/TLS to communicate between different systems. By default, the product is installed with default certificates that provide some assurance of identity between nodes. This document explains how to replace these default certificates with…
Install the LifeKeeper Software with Sybase
Application Recovery Kits » Sybase ASE Recovery Kit Administration Guide » Installing and Configuring Sybase ASE with LifeKeeper » Install the LifeKeeper Software with Sybase
Once you have installed the Sybase ASE software and created your database servers, you are ready to install the LifeKeeper Core software, LifeKeeper for Linux IP Recovery Kit and any required patches followed by the Sybase ASE Recovery Kit. Also, if you plan to use…
Creating a Client and Witness Server
Quick Start Guides » Microsoft Azure Quick Start Guide » Building a Virtual Machine and Starting the OS » Creating a Virtual Machine » Creating a Client and Witness Server
Please refer to the LifeKeeper Evaluation Guide for Cloud Environments.
GUI Mirror Administration
LifeKeeper for Linux Technical Documentation » DataKeeper » Administering SIOS DataKeeper for Linux » GUI Mirror Administration
A SIOS DataKeeper mirror can be administered through the LifeKeeper GUI in two ways: By enabling the Properties Panel and clicking the toolbar icons (shown in the screenshot). Click on each icon below for a description. OR By…
GUI Message Catalog
Search for an Error Code » Combined Message Catalog » GUI Message Catalog
Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen. …
Configuring GUI Users
LifeKeeper for Linux Installation Guide » Setting Up Your LifeKeeper Environment » Configuring GUI Users
GUI Authentication with PAM LifeKeeper for Linux now leverages the Pluggable Authentication Module (PAM) provided in the Linux Standard Base (LSB). LifeKeeper no longer uses its private password file once located in /opt/LifeKeeper/website/passwd. Instead, users are…
LifeKeeper Single Server Protection for Linux Installation Guide
LifeKeeper Single Server Protection » LifeKeeper Single Server Protection for Linux Installation Guide
About LifeKeeper Single Server Protection for Linux LifeKeeper Single Server Protection (SSP) allows for application monitoring in a single node configuration (i.e., no cluster requirements or restraints). Single node environments may be physical or virtual (vSphere,…
LifeKeeper Single Server Protection for Linux Technical Documentation
LifeKeeper Single Server Protection » LifeKeeper Single Server Protection for Linux Technical Documentation
About LifeKeeper Single Server Protection for Linux LifeKeeper Single Server Protection (SSP) allows for application monitoring in a single node configuration (i.e., no cluster requirements or restraints). Single node environments may be physical or virtual (vSphere,…
LifeKeeper Single Server Protection Heartbeat with VMware HA
LifeKeeper Single Server Protection » LifeKeeper Single Server Protection for Linux Technical Documentation » Administration » LifeKeeper Single Server Protection Heartbeat with VMware HA
The LifeKeeper Single Server Protection heartbeat is the signal sent to VMware HA (every 10 seconds if running in a VMware guest OS and if HA is enabled) indicating that the protected applications are OK. If an application fails, LifeKeeper Single Server Protection…
LifeKeeper Single Server Protection for Linux Release Notes
LifeKeeper Single Server Protection » LifeKeeper Single Server Protection for Linux Release Notes
Version 9.8.0 Released September 26, 2023 Important!! !IMPORTANT: Starting in LifeKeeper for Linux v9.8.0 the perl version that is included has been upgraded to Perl 5.32.1 which may require changes to custom perl code. Refer to Perl 5.8.8 to Perl 5.32.1 Upgrade…
Deciding on a Google Cloud Region
Evaluation Guides » LifeKeeper Evaluation Guide for Cloud Environments » Configuring Network Components and Creating Instances » Creating an Instance in Google Cloud from Scratch » Deciding on a Google Cloud Region
Google Cloud has regions in many geographic locations and it may be beneficial to select a region in close geographic proximity to the workplace location. Each region has three or more Zones, but available machine types are slightly different between…
Running Multiple Instances of Samba
Application Recovery Kits » Samba Recovery Kit Administration Guide » Configuring Samba with LifeKeeper » Running Multiple Instances of Samba
Running multiple instances of Samba in a LifeKeeper cluster introduces additional configuration requirements and restrictions. The following Samba configuration scenarios may involve multiple instances of Samba: Active/Standby configuration with multiple LifeKeeper…
Modifying Protection for the Sybase Backup Server
Application Recovery Kits » Sybase ASE Recovery Kit Administration Guide » Sybase ASE Recovery Kit Administration » Modifying Protection for the Sybase Backup Server
The Sybase Backup Server is an Open Server-based application that manages all database backups (dump) and restores (load) operations for Adaptive Server. The Sybase Backup Server can be protected by the LifeKeeper Sybase ASE resource hierarchy during the resource…
Modifying Protection for the Sybase Monitor Server
Application Recovery Kits » Sybase ASE Recovery Kit Administration Guide » Sybase ASE Recovery Kit Administration » Modifying Protection for the Sybase Monitor Server
*NOTE: The Sybase Monitor Server is no longer supported with the Sybase ASE ARK v9.0.2 and later. The Monitor Server is a separate server from the database server that monitors the Adaptive Server. The Monitor Server can provide real time or historical data to client…
Installation of the Primary Application Server Instance
Application Recovery Kits » SAP Recovery Kit Administration Guide » SAP Installation » Installation of the Primary Application Server Instance
To install the Primary Application Server instance, rerun sapinst from the previously mentioned directory. ./sapinst SAPINST_USE_HOSTNAME= When prompted, Select Primary Application Server Instance and continue with installation using the appropriate SAP…
Enabling VMware HA Integration with LifeKeeper Single Server Protection
LifeKeeper Single Server Protection » LifeKeeper Single Server Protection for Linux Technical Documentation » Administration » Enabling VMware HA Integration with LifeKeeper Single Server Protection
By default LifeKeeper Single Server Protection integration with VMware HA is disabled when installed on a VMware VM. To enable integration requires the following steps: Installation of VMware tools in the LifeKeeper Single Server Protection VM. Edit…
Server Failure
LifeKeeper for Linux Technical Documentation » DataKeeper » Administering SIOS DataKeeper for Linux » Server Failure
If both your primary and backup servers become inoperable, your DataKeeper resource will be brought into service/activated only when both servers are functional again. This is to avoid data corruption that could result from initiating the resynchronization in the…
How to Confirm if the Data Storage is Available on a Node
Evaluation Guides » LifeKeeper Evaluation Guide for Cloud Environments » Protecting Our Resources » Common Tasks » How to Confirm if the Data Storage is Available on a Node
During these steps we will be switching data storage between nodes. Here are two options to check whether the data storage (per this guide, located at /datakeeper) is available in a node. View the output from the df command. Check the LifeKeeper GUI to see…
Common Causes of a LifeKeeper Initiated Failover
LifeKeeper for Linux Technical Documentation » LifeKeeper » Troubleshooting » Common Causes of a LifeKeeper Initiated Failover
In the event of a failure, LifeKeeper has two methods of recovery: local recovery and inter-server recovery. If local recovery fails, a “failover” is implemented. A failover is defined as automatic switching to a backup server upon the failure or abnormal…
LifeKeeper Flags
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » Advanced Tasks » LCD » LifeKeeper Flags
Near the end of the detailed status display, LifeKeeper provides a list of the flags set for the system. A common type is a Lock LCD flag used to ensure that other processes wait until the process lock completes its action. The following is the standard LCD lock…
LifeKeeper Core
LifeKeeper for Linux Technical Documentation » LifeKeeper » SIOS LifeKeeper for Linux Introduction » LifeKeeper Core
LifeKeeper Core is composed of four major components: LifeKeeper Core Software File System, Generic Application, Raw I/O and IP Recovery Kit Software LifeKeeper GUI Software LifeKeeper Man Pages LifeKeeper Core Software The LifeKeeper Core Software…
Starting LifeKeeper
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » Common Tasks » Starting LifeKeeper
All LifeKeeper software is installed in the directory /opt/LifeKeeper. When you have completed all of the verification tasks, you are ready to start LifeKeeper on both servers. This section provides information for starting the LifeKeeper server daemon processes. The…
Stopping LifeKeeper
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » Common Tasks » Stopping LifeKeeper
If you need to stop LifeKeeper, type the appropriate command as root to stop it: Using systemctl Command systemctl set-environment LKSTOP_MODE=stop-nofailover; systemctl stop lifekeeper; systemctl unset-environment LKSTOP_MODE This command will shut down LifeKeeper…
LifeKeeper Components
LifeKeeper for Linux Release Notes » LifeKeeper Components
LifeKeeper Core LifeKeeper for Linux is bundled for, and only runs on, 64-bit systems (AMD64 and EM64T systems). The LifeKeeper Core bundle includes: LifeKeeper DataKeeper Application Recovery Kits The LifeKeeper Core Package Cluster includes the following…
Upgrading LifeKeeper
LifeKeeper for Linux Installation Guide » Upgrading LifeKeeper
!The version of Perl shipped with LifeKeeper for Linux v9.8.0 has been upgraded from 5.8.8 to 5.32.1. If you are using a Perl-based Generic ARK, please review the impact of this Perl upgrade before upgrading from LifeKeeper for Linux prior to v9.7.0 to LifeKeeper for…
Removing LifeKeeper
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » Maintenance Tasks » Removing LifeKeeper
You can uninstall LifeKeeper in a Linux environment via the command line by entering the following command. /opt/LifeKeeper/bin/rmlk This command uninstalls all the LifeKeeper packages and removes the directory /opt/LifeKeeper from the system. The command can be…
Install LifeKeeper
Application Recovery Kits » SAP Recovery Kit Administration Guide » SAP Installation » Install LifeKeeper
On both the Primary and the Backup servers, LifeKeeper software will now be installed including the following recovery kits: SAP appropriate database (i.e. Oracle, SAP MaxDB) IP NAS (required when data is hosted by an NFS server) Quorum…
Start Database and Listener on node-a
Evaluation Guides » LifeKeeper Evaluation Guide for Cloud Environments » Protecting Our Resources » How to Protect Other Resources (Databases or Applications) » Protecting an Oracle Resource (non-PDB) » Start Database and Listener on node-a
*The following steps should be completed on node-a. As discussed in previous steps, start the database with sqlplus and the listener with lsnrctl. Start both processes on node-a so that LifeKeeper can see these processes as the corresponding resources are…
GUI Overview – General
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » GUI » GUI Overview – General
The GUI allows users working on any machine to administer, operate or monitor servers and resources in any cluster as long as they have the required group memberships on the cluster machines. (For details, see Configuring GUI Users. The GUI Server and Client components…
SAP HANA GUI States
Application Recovery Kits » SAP HANA Recovery Kit Administration Guide » SAP HANA Recovery Kit Overview » SAP HANA GUI States
The active (ISP) resource can have the following states. Some of these warning and failure states are transient and may appear while LifeKeeper is attempting to recover required processes or before LifeKeeper initiates a failover of the HANA resource…
Configuring the LifeKeeper for Linux NAS Recovery Kit
Application Recovery Kits » NAS Recovery Kit Administration Guide » Configuring the LifeKeeper for Linux NAS Recovery Kit
This section describes the LifeKeeper for Linux NAS Recovery Kit configuration details. It also contains information you should consider before you start to configure and administer the NAS Recovery Kit. Please refer to LifeKeeper for Linux Technical Documentation for…
Configuring the LifeKeeper for Linux DB2 Recovery Kit
Application Recovery Kits » DB2 Recovery Kit Administration Guide » Configuring the LifeKeeper for Linux DB2 Recovery Kit
This section describes the LifeKeeper for Linux DB2 Recovery Kit configuration details. It also contains information you should consider before you start to configure and administer the DB2 Recovery Kit. Please refer to LifeKeeper for Linux Technical Documentation for…
Configuring the Oracle Net Listener for LifeKeeper Protection
Application Recovery Kits » Oracle Recovery Kit Administration Guide » Configuring Oracle with LifeKeeper » Configuring the Oracle Net Listener for LifeKeeper Protection
If your Oracle database will have remote client connections, you will want to protect the Oracle Listener in addition to the Oracle database server. Please refer to the Oracle documentation for information on using Oracle network configuration utilities to create…
tset Errors Appear in the LifeKeeper Log File
Application Recovery Kits » SAP Recovery Kit Administration Guide » tset Errors Appear in the LifeKeeper Log File
Cause: The su commands used by the SAP and Database Recovery Kits cause a ‘tset’ error message to be output to the LK log that appears as follows: tset: standard error: Invalid argument This error comes from one of the profile files in the SAP…
Configuring the LifeKeeper for Linux Postfix Recovery Kit
Application Recovery Kits » Postfix Recovery Kit Administration Guide » Configuring the LifeKeeper for Linux Postfix Recovery Kit
This section describes the LifeKeeper for Linux Postfix Recovery Kit configuration details. It also contains information you should consider before you start to configure and administer the Postfix Recovery Kit. Please refer to LifeKeeper for Linux Technical…
Connecting to a LifeKeeper Cluster using AWS Requirements
Quick Start Guides » Multi-VPC Cluster Configuration Using AWS VPC Peering Connections Quick Start Guide » Connecting to a LifeKeeper Cluster using AWS Requirements
Some requirements should be met when using this configuration. Below is a summary of requirements for the AWS environment and instances created on it. Requirements for AWS environment Create a base environment on AWS to provide services. The requirements for using…
Sybase ASE Monitor Server and Backup Server
Application Recovery Kits » Sybase ASE Recovery Kit Administration Guide » Sybase ASE Recovery Kit Configuration Considerations » Sybase ASE Monitor Server and Backup Server
The LifeKeeper for Linux Sybase ASE Recovery Kit provides resource protection for the Adaptive Server, Backup Server, and Monitor Server components. However, the Backup Server and Monitor Server components are not required components of a resource hierarchy. The Sybase…
Mapping Server Configurations
LifeKeeper for Linux Installation Guide » Planning Your LifeKeeper Environment » Mapping Server Configurations
Document your server configuration using the following guidelines: Determine the server names, processor types, memory and other I/O devices for your configuration. When you specify a backup server, you should ensure that the server you select has the capacity to…
Viewing Server Properties
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » Common Tasks » Viewing Server Properties
There are two possible ways to begin. • Right-click on the icon for the server for which you want to view the properties. When the Server Context Menu appears, click Properties. Server properties will also be displayed in the Properties Panel if it is…
Server Context Toolbar
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » GUI » Toolbars » Server Context Toolbar
The server context toolbar is displayed in the properties panel when you select a server in the status table. The actions are invoked for the server that you select. Disconnect. Disconnect from a LifeKeeper cluster. Refresh.…
Server Properties Dialog
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » Common Tasks » Server Properties Dialog
The Server Properties dialog is available from a server context menu or from the Edit menu. This dialog displays the properties for a particular server. The properties for the server will also be displayed in the properties panel if it is enabled. The three tabs of…
Editing Server Properties
LifeKeeper for Linux Technical Documentation » LifeKeeper » LifeKeeper Administration Overview » Administrator Tasks » Editing Server Properties
To edit the properties of a server, bring up the Server Properties dialog just as you would for viewing server properties. If you are logged into that server with the appropriate permissions, the following items will be editable. • Shutdown Strategy …
Server Context Menu
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » GUI » Menus » Server Context Menu
The Server Context Menu appears when you right-click on a server icon in the status table. This menu is the same as the Edit Menu’s Server submenu except that the actions are always invoked on the server that you initially selected. Disconnect. Disconnect…
GUI – Known Issues / Restrictions
LifeKeeper for Linux Technical Documentation » LifeKeeper » Troubleshooting » Known Issues and Restrictions » GUI – Known Issues / Restrictions
Description Using source address routing with IP resources can impact the GUI Using source address routing with IP resources can impact the GUI’s ability to properly display the resource status when performing a switchover. The resource…
Known Issues/Restrictions when using LifeKeeper on Oracle Cloud Infrastructure (OCI)
LifeKeeper for Linux Technical Documentation » LifeKeeper » Troubleshooting » Known Issues and Restrictions » Known Issues/Restrictions when using LifeKeeper on Oracle Cloud Infrastructure (OCI)
Oracle Cloud Infrastructure (OCI) Support Configuration You must use the Recovery Kit for Oracle Cloud Infrastructure on OCI. Oracle provides images for the following Operating Systems supported by LifeKeeper. See the Support Matrix for supported OS…
Viewing LifeKeeper Processes
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » Common Tasks » Viewing LifeKeeper Processes
To see a list of all LifeKeeper core daemon processes currently running, type the following command: ps -ef | grep LifeKeeper | grep -w bin | grep -v lklogmsg An example of the output is provided below: root 11880 11873 0 14:03 ? 00:00:00…
LifeKeeper Administration Overview
LifeKeeper for Linux Technical Documentation » LifeKeeper » LifeKeeper Administration Overview
LifeKeeper does not require administration during operation. LifeKeeper works automatically to monitor protected resources and to perform the specified recovery actions if a fault should occur. You use the LifeKeeper GUI in these cases: Resource and hierarchy…
About LifeKeeper Licensing
LifeKeeper for Linux Installation Guide » Setting Up Your LifeKeeper Environment » About LifeKeeper Licensing
LifeKeeper for Linux requires a unique license for each server. The license is a run-time license, which means that you can install LifeKeeper without it, but the license must be installed before you can successfully start and run the product.
LifeKeeper Configuration Steps
LifeKeeper for Linux Technical Documentation » LifeKeeper » Installation and Configuration » LifeKeeper Configuration Steps
If you have installed your LifeKeeper environment as described in the LifeKeeper for Linux Installation Guide, you should be ready to start and configure the LifeKeeper for Linux software on each server in your cluster. Follow the steps below which contain links to…
LifeKeeper for Linux
LifeKeeper for Linux
About LifeKeeper for Linux LifeKeeper for Linux integrates high availability clustering with innovative data replication functionality in a single, enterprise-class solution. LifeKeeper for Linux Integrated Components SIOS LifeKeeper provides a complete…
Connecting to the First Node (node-a)
Evaluation Guides » LifeKeeper Evaluation Guide for Cloud Environments » Login and Basic Configuration Tasks » Connecting to the First Node (node-a)
Once logged in to the node with “X11 forwarding” enabled, type the following command to start the LifeKeeper for Linux GUI: In the login dialog pop-up, enter the root username and password to login: After successfully logging in, you should see node-a in…
Set a Password for the Root User
Evaluation Guides » LifeKeeper Evaluation Guide for Cloud Environments » Configure Linux Nodes to Run LifeKeeper for Linux » Set a Password for the Root User
*The following commands must be executed for each node. This tutorial uses the root user to login into the LifeKeeper for Linux GUI and it requires a password to perform operations. Please define a password for root user. 1. Set a root password. # passwd Changing…
Considering the Use of Quorum/Witness or STONITH when Connecting to a LifeKeeper Cluster using AWS
Quick Start Guides » Multi-VPC Cluster Configuration Using AWS VPC Peering Connections Quick Start Guide » Connecting to a LifeKeeper Cluster using AWS Settings and Operations Considerations » Considering the Use of Quorum/Witness or STONITH when Connecting to a LifeKeeper Cluster using AWS
Since the shared disk environment cannot be used in an AWS environment, you cannot use SCSI reservations to prevent a split-brain. Also, an IP resource may cause the split-brain as it uses the real IP resource with different IP addresses for each node. For this…
Peering Requirements for Connecting to a LifeKeeper Cluster using AWS
Quick Start Guides » Multi-VPC Cluster Configuration Using AWS VPC Peering Connections Quick Start Guide » Connecting to a LifeKeeper Cluster using AWS Requirements » Peering Requirements for Connecting to a LifeKeeper Cluster using AWS
You need to install the same version of LifeKeeper software and patches on each server. The Application Recovery Kit (ARK) required for this configuration is shown below. For the specific LifeKeeper requirements, please refer to: LifeKeeper for Linux Technical…
Setup Procedure for Connecting to a LifeKeeper Cluster using AWS
Quick Start Guides » Multi-VPC Cluster Configuration Using AWS VPC Peering Connections Quick Start Guide » Setup Procedure for Connecting to a LifeKeeper Cluster using AWS
In this section, a general procedure to setup the environment shown as the figure below Preparations Create an environment that satisfies Requirements. Please install LifeKeeper on each instance and create a communication path between Node1 and Node2 (or Node2’).…
Multiple Database Server Environment
Application Recovery Kits » MySQL Recovery Kit Administration Guide » MySQL Recovery Kit Configuration » Multiple Database Server Environment
Following are some configuration considerations if you have multiple MySQL database servers and databases: If running active/active or muliple MySQL instances (of the same or different versions), please consider using the mysqld Group feature if possible. SIOS…
Setting Server Shutdown Strategy
LifeKeeper for Linux Technical Documentation » LifeKeeper » Installation and Configuration » Optional Configuration Tasks » Setting Server Shutdown Strategy
The Shutdown Strategy is a LifeKeeper configuration option that governs whether or not resources are switched over to a backup server when a server is shut down. The options are: Do Not Switch Over Resources (default) LifeKeeper will not bring resources…
Apache Web Server Troubleshooting
Application Recovery Kits » Apache Recovery Kit Administration Guide » Apache Web Server Troubleshooting
This section provides a list of messages that you may encounter during the process of creating and extending a LifeKeeper Apache Web Server resource hierarchy, removing and restoring a resource, and, where appropriate, provides additional explanation of the cause of…
Viewing Server Log Files
LifeKeeper for Linux Technical Documentation » LifeKeeper » User Guide » Using LifeKeeper for Linux » Common Tasks » Viewing Server Log Files
There are four ways to begin. • Right-click on a server icon to display the Server Context Menu, then click View Log to bring up the LifeKeeper Log Viewer Dialog. • On the Global Toolbar, click the View Log button, then select the server that you want…
Server Properties – Failover
LifeKeeper for Linux Technical Documentation » LifeKeeper » LifeKeeper Administration Overview » Administrator Tasks » Server Properties – Failover
In the event that the primary server has attempted and failed local recovery, or failed completely, most server administrators will want LifeKeeper to automatically restore the protected resource(s) to a backup server. This is the default LifeKeeper behavior. However,…