The topic you requested could not be found.
Related topics are listed below.

Unextending a SQL Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Installation » Unextending a SQL Hierarchy

To remove a resource hierarchy from a single server in the SIOS Protection Suite cluster, do the following: On the Edit menu, select Resource, then Unextend Resource Hierarchy. Select the Target Server where you want to unextend the SQL resource. It cannot be…

Unextending a PostgreSQL Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » Server Configuration Considerations » Unextending a PostgreSQL Hierarchy

To remove a resource hierarchy from a single server in the SIOS Protection Suite cluster, do the following: On the Edit menu, select Resource, then Unextend Resource Hierarchy. Select the Target Server where you want to unextend the SQL resource. It cannot be…

Unextending an Oracle Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Resource Configuration Tasks » Unextending an Oracle Hierarchy

To remove a resource hierarchy from a single server in the LifeKeeper cluster, do the following: On the Edit menu, select Resource, then Unextend Resource Hierarchy. Select the Target Server where you want to unextend the Oracle resource. It cannot be the server…

Extending a PostgreSQL Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » Server Configuration Considerations » Extending a PostgreSQL Hierarchy

This operation can be started from the Edit menu or initiated automatically upon completing the Create Resource Hierarchy option, in which case you should refer to Step 2 below. From the Edit menu, select Resource then Extend Resource Hierarchy. The Pre-Extend…

Maintaining a Resource Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Maintenance Tasks » Maintaining a Resource Hierarchy

You can perform maintenance on a resource hierarchy while maintaining SIOS Protection Suite protection of all other hierarchies on the system. This involves taking the hierarchy in need of maintenance out of service and then bringing it back in service after you…

Extending a SQL Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Installation » Extending a SQL Hierarchy

This operation can be started from the Edit menu or initiated automatically upon completing the Create Resource Hierarchy option, in which case you should refer to Step 2 below. From the Edit menu, select Resource then Extend Resource Hierarchy. The Pre-Extend…

Expanding and Collapsing A Resource Hierarchy Tree

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Common Tasks » Expanding and Collapsing A Resource Hierarchy Tree

The resource MSExch.0 is collapsed in this tree. The resource MSExch.0 is expanded in this tree. appears if it is collapsed. appears to the left of a resource icon if it is expanded. To expand a resource hierarchy, click the …

Oracle Hierarchy Administration

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Hierarchy Administration

The topics in this section assist in the administration of Oracle hierarchies.

Create Hierarchy Failed

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Troubleshooting Tips » Create Hierarchy Failed

Suggestion Check the following: All volumes and communications resources (IP and/or LAN Manager) associated with the SID should already be under LifeKeeper protection. All the shared or replicated volumes are available to the primary server and all volumes are…

IIS Hierarchy Administration

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » IIS Hierarchy Administration

The topics in this section assist in the administration of IIS hierarchies. _____________________________________________________________________________________________________________________________________________________ Modifying Quick Check Interval, Deep Check…

Creating an Oracle Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Resource Configuration Tasks » Creating an Oracle Hierarchy

After you have completed the necessary setup tasks, use the following steps to define the Oracle Server hierarchy to protect your database(s). From the LifeKeeper GUI menu, select Edit, then Server. From the menu, select Create Resource Hierarchy. The Create…

SQL Server Hierarchy Administration

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Hierarchy Administration

Follow these guidelines when administering your SQL Server. __________________________________________________________________________________________________________________________________________________ Access Via Protected Communication Paths User Resource Name…

Creating the SQL Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Installation » Creating the SQL Hierarchy

After you have completed the necessary setup tasks outlined in the SIOS Protection Suite for Windows Installation Guide, use the following steps to define the SQL Server hierarchy to protect your database(s). !Important: If you have an existing SQL database…

Monitoring Your SQL Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Hierarchy Administration » Monitoring Your SQL Hierarchy

For every SQL resource, SIOS Protection Suite monitors the Microsoft SQL Server service and any optional services selected during the creation of the SQL hierarchy or added at a later time. Should any of these services stop, the monitoring process associated with the…

Creating the PostgreSQL Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » Server Configuration Considerations » Creating the PostgreSQL Hierarchy

After you have completed the necessary setup tasks outlined in the SIOS Protection Suite for Windows Installation Guide, use the steps listed below to create the PostgreSQL Server hierarchy to protect your database cluster. Important If you have…

Extending an Oracle Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Resource Configuration Tasks » Extending an Oracle Hierarchy

This operation can be started from the Edit menu or initiated automatically upon completing the Create Resource Hierarchy option in which case you should refer to Step 2 below. On the Edit menu, select Resource, then Extend Resource Hierarchy. The Pre-Extend Wizard…

Monitoring Your PostgreSQL Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » PostgreSQL Server Hierarchy Administration » Monitoring Your PostgreSQL Hierarchy

SIOS Protection Suite monitors the PostgreSQL database cluster services for every PostgreSQL resource. If the services stop, the monitoring process associated with the PostgreSQL resource will detect this and attempt to restart the services on the local server if Local…

Unextend Your IIS Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » IIS Resource Configuration Tasks » Unextend Your IIS Hierarchy

To unextend your IIS hierarchy from a system: From the LifeKeeper GUI menu, select Edit then Resource. From the drop down menu, select Unextend Resource Hierarchy. Select the Target Server where you want to unextend the IIS resource. It cannot be the server…

Resource Hierarchy for Oracle

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Resource Hierarchy for Oracle

The typical Oracle resource hierarchy consists of the following resources: Oracle Shared communication resource (IP or LAN Manager alias name) Volume(s) All Oracle data, log, and trace (core database) files for the protected SID are stored on shared or…

Deleting an Oracle Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Resource Configuration Tasks » Deleting an Oracle Hierarchy

Before deleting an Oracle hierarchy or instance, make sure that the hierarchy is active (green) on its primary server. You may also wish to remove the dependencies before deleting the hierarchy; otherwise, the dependencies will be deleted also. Deleting an Oracle…

Oracle Hierarchy Administration Guidelines

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Hierarchy Administration » Oracle Hierarchy Administration Guidelines

Follow these guidelines for administering your Oracle hierarchy: Access via protected communication paths. To ensure that users can access the Oracle SID, regardless of the physical system on which it is running, all remote access of the database should be done…

PostgreSQL Server Hierarchy Administration

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » PostgreSQL Server Hierarchy Administration

Follow these guidelines when administering your PostgreSQL Server. Access Via Protected Communication Paths Reserve Volumes For Exclusive PostgreSQL Use Start and Stop PostgreSQL Server Only Through SIOS Protection Suite Creating and Protecting Additional…

Testing Your SQL Resource Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Configuration Considerations » Testing Your SQL Resource Hierarchy

You can test your SQL resource hierarchy by initiating a manual switchover. This will simulate a failover of a resource instance from the primary server to the backup server. Selecting Edit, then Resource, then In Service. For example, an In Service request executed…

Delete an IIS Resource Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » IIS Resource Configuration Tasks » Delete an IIS Resource Hierarchy

To delete a resource hierarchy from all the servers in your LifeKeeper environment, complete the following steps: From the LifeKeeper GUI menu, select Edit then Resource. From the drop down menu, select Delete Resource Hierarchy. Select the Target Server where…

Testing Your Oracle Resource Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Resource Configuration Tasks » Testing Your Oracle Resource Hierarchy

You can test your Oracle resource hierarchy by initiating a manual switchover. This will simulate a failover of a resource instance from the primary server to the backup server. You can select Edit, then Resource, then In Service. For example, an In Service request…

Testing Your PostgreSQL Resource Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » Server Configuration Considerations » Testing Your PostgreSQL Resource Hierarchy

You can test your PostgreSQL resource hierarchy by initiating a manual switchover. This will simulate a failover of a resource instance from the primary server to the backup server. Select Edit, then Resource, then In Service. For example, an In Service request…

Create an IIS Resource Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » IIS Resource Configuration Tasks » Create an IIS Resource Hierarchy

Before creating your IIS hierarchy, be sure you have created the associated IP and volume (if needed) resource hierarchies first. To create a resource instance from the primary server, you should complete the following steps: From the LifeKeeper GUI menu, select…

Extend an IIS Resource Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » IIS Resource Configuration Tasks » Extend an IIS Resource Hierarchy

This operation can be started from the Edit menu or initiated automatically upon completing the Create IIS Resource Hierarchy option, in which case you should refer to Step 2 below. On the Edit menu, select Resource then Extend Resource Hierarchy. The Pre-Extend…

Testing Your IIS Resource Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » Testing Your IIS Resource Hierarchy

The topics in this section assist in testing your IIS resource hierarchy. _____________________________________________________________________________________________________________________________________________________ Performing a Manual Switchover from the…

Win2008 – IIS Resource Hierarchy Creation Error

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Troubleshooting » Win2008 – IIS Resource Hierarchy Creation Error

Symptom On a Win2008 system when creating an IIS Resource Hierarchy, you receive the following message: No qualified sites were found… and the create fails. BACKGROUND /…

Replacing a Target

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Mirrors » Replacing a Target

When replacing the target volume, you must either break the mirror or delete the mirror in order to ensure a full resync of the data from the source volume to the target volume when the target volume is back in place. Though similar to the Pause and Unlock, breaking…

Creating a Job

SIOS DataKeeper for Windows Technical Documentation » User Guide » Setup » Creating a Job

If not already connected, connect to the server where you want to create a job. From the right Actions pane, select Create Job. The Job Wizard will prompt you for a Job Name and Description. Enter the appropriate information and select Create Job to…

Deleting a Mirror

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Mirrors » Deleting a Mirror

This action discontinues replication and removes the mirror from the associated job. The target volume is unlocked and made fully accessible. Select the job that contains the mirror you want to delete. Right-click on the mirror and choose Delete Mirror or…

Creating a Mirror

SIOS DataKeeper for Windows Technical Documentation » User Guide » Configuring Mirrors » Creating a Mirror

Before creating a mirror, ensure the following: You have created a job to hold the mirror. The volume on both the source and target systems must be of the NTFS file system type. The target volume must be greater than or equal to the size of the source…

Renaming a Job

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Jobs » Renaming a Job

Select the job in the left Console Tree pane of the main DataKeeper window. You can select Rename Job from the Actions pane or right-click on the selected job and choose Rename Job from the menu that displays. Enter the new Job Name and new Job…

Deleting a Job

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Jobs » Deleting a Job

Select the job in the left Console Tree pane of the main DataKeeper window. You can select Delete Job from the Actions pane or right-click on the selected job and choose Delete Job from the menu that displays. Select Yes to delete the selected job and…

Reassigning a Job

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Jobs » Reassigning a Job

Use the Reassign Job function to move an existing mirror from one job to another without deleting the mirror. Select the job from the middle Summary panel. Right-click and select Reassign Job or select Reassign Job from the Actions panel. Select an existing…

Deleting a Mirror

SIOS DataKeeper for Windows Technical Documentation » FAQs » Deleting a Mirror

Question What actually happens when you delete a mirror? Answer The data remains on both sides, but the target and source data are no longer synchronized. The target volume is unlocked and made fully accessible.

Extending a Single SQL Server Node to a Cluster

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Clustering » Extending a Single SQL Server Node to a Cluster

This guide explains how to install a single SQL Server node and extend it to a clustered node. Please read this document carefully prior to installation. Planning Steps: Start with a Microsoft SQL Server standalone node, where data resides on the C drive. Note:…

Disconnecting From a Cluster

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Common Tasks » Disconnecting From a Cluster

This task disconnects your client from all servers in a cluster. Select a server from which you want to disconnect and then select Disconnect from the Server Context Menu or Server Context Toolbar. A Confirmation dialog listing all servers in the cluster is…

Connecting to a Server

SIOS DataKeeper for Windows Technical Documentation » User Guide » Setup » Connecting to a Server

Use this dialog to connect to the server of your choice. You may enter the IP address, system NetBIOS name or the full system domain name for the server. Click Connect to select it.

Deleting a SQL Hiearchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Installation » Deleting a SQL Hiearchy

Before deleting a SQL hierarchy or instance, make sure that the hierarchy is active (green) on its primary server. You may also wish to remove the dependencies before deleting the hierarchy; otherwise, the dependencies will be deleted also. To delete a resource…

Adding a Shared System

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Shared Volumes » Adding a Shared System

To add a shared system to either the source or target side of a mirror, you must be connected to that system. You can connect to the system prior to starting the Manage Shared Volumes dialog, or you can click Connect to Server from within the dialog. In either case,…

Switching Over a Mirror

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Jobs » Switching Over a Mirror

The Switchover Mirror function enables you to switch over all the mirrors in a job or just one of the mirrors in a job. A “mirror” includes all variants for mirrors such as standard single-target replication and complex geometries such as multi-target…

Removing a Shared System

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Shared Volumes » Removing a Shared System

To remove a shared system from either side of the mirror, bring up the Manage Shared Volumes dialog and uncheck the Include box for the system to be removed. When you click Done, the job will be updated so that the system is not part of the job. Warning: If a shared…

Recovering After a Failover

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Maintenance Tasks » Recovering After a Failover

After SIOS Protection Suite performs a failover recovery from a primary server (ServerA) to a backup server (Server B), perform the following steps: Monitor failover. When SIOS Protection Suite on Server B performs a failover recovery from Server A, status messages…

Disconnecting from a Server

SIOS DataKeeper for Windows Technical Documentation » User Guide » Setup » Disconnecting from a Server

Use this dialog to disconnect from a server. You may use this option if you no longer wish to view the server in the Administration Window. From the list of servers, select the server(s) that you wish to disconnect from and click Disconnect.

Connecting To A Cluster

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Common Tasks » Connecting To A Cluster

From the File Menu or the Global Toolbar, select Connect. In the Server Name field of the Cluster Connect Dialog, enter the name of a server within the cluster to which you want to connect. Note: If using an IPv6 address, this address will need to be enclosed…

Deleting a PostgreSQL Hiearchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » Server Configuration Considerations » Deleting a PostgreSQL Hiearchy

Before deleting a PostgreSQL hierarchy or instance, make sure that the hierarchy is active (green) on its primary server. You may also wish to remove the dependencies before deleting the hierarchy; otherwise, the dependencies will also be deleted. To delete a resource…

Extending a Clustered DataKeeper Volume to a Node Outside the Cluster

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Clustering » Extending a Clustered DataKeeper Volume to a Node Outside the Cluster

DataKeeper Volume cluster resources can be extended to a DR Node for Disaster Recovery purposes. In the event of a complete failure of all systems in the cluster, data will be accessible on the DR Node (referred to as the “DR Node”). Here you will find instructions…

Extending a Traditional 2-Node Cluster to a Shared-Replicated Configuration

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Clustering » Extending a Traditional 2-Node Cluster to a Shared-Replicated Configuration

Add a Shared Node Using Windows Server 2008R2 or 2012 When using Windows Server 2008R2 or 2012, a 1×1 2-Node replicated cluster using DataKeeper Volumes can be extended to a 2×1 shared and replicated 3-Node cluster by using either of the following…

Managing a SQL Server Configuration

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Configuration Considerations » Managing a SQL Server Configuration

To administer a protected SQL Server resource from the LifeKeeper GUI, right-click on the SQL Server resource (on the right-hand side of the LifeKeeper GUI) and select properties, then select the SQL Server Configuration tab. Use the SQL Server Configuration page to…

Bringing A Resource In Service

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Operator Tasks » Bringing A Resource In Service

To bring a resource in service: Select a server-specific resource instance that you want to bring in service and then select In Service from the Resource Context Menu or Resource Context Toolbar. A dialog appears confirming the server and resource(s) that you…

Inability to Create a Mirror

SIOS DataKeeper for Windows Technical Documentation » FAQs » Inability to Create a Mirror

Question Why can’t I create a mirror? Answer The common cause of this problem is that the volume on either source or target is in use by another process. Stop the process that is accessing the volume and try again. The SIOS DataKeeper software requires…

Extending a Traditional 2-Node WSFC Cluster to a Third Node via DataKeeper

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Clustering » Extending a Traditional 2-Node WSFC Cluster to a Third Node via DataKeeper

When replicating from a WSFC 2-node cluster to a third node via DataKeeper, the following tasks are required: Replace the existing WSFC physical disk resource with a DataKeeper volume resource that supports data replication. Change the quorum type to Node…

Recovering From a SIOS Protection Suite Server Failure in a 1 × 1 Configuration

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Troubleshooting » Recovering From a SIOS Protection Suite Server Failure in a 1 × 1 Configuration

If a server in your SIOS Protection Suite cluster experiences a failure that causes re-installation of the operating system (and thus SIOS Protection Suite), you will have to re-extend the resource hierarchies from each server in the cluster. If a server in the cluster…

SIOS Protection Suite Web Client May Lock Up – Multiple Changes Made to Existing Hierarchy

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Troubleshooting » SIOS Protection Suite Web Client May Lock Up – Multiple Changes Made to Existing Hierarchy

Symptom The SIOS Protection Suite web client may lock up when used from the server machine if multiple changes are made to an existing hierarchy (i.e. create/delete dependencies), closing and reopening the SIOS Protection Suite client between changes. Solution To…

Extend of a SQL Resource Fails

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » Troubleshooting » Extend of a SQL Resource Fails

Symptom: The Extend of a Microsoft SQL resource will fail if the primary and backup configurations are different (i.e. Microsoft SQL ID mismatch). Below is an example of the error message displayed in the LifeKeeper GUI during the can extend operation: Process:…

Viewing The Status Of A Server

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Common Tasks » Viewing The Status Of A Server

The state of a server can be determined by looking at the graphic representation of the server in the table’s header as shown below. Server State Visual State What it Means ALIVE Client has valid connection to the…

Taking a Resource Out Of Service

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Operator Tasks » Taking a Resource Out Of Service

To take a resource out of service: Select a server-specific resource instance that you want to take out of service and then select Out of Service from the Resource Context Menu or Resource Context Toolbar. A dialog appears confirming the selected resource(s) to…

Performing a Manual Switchover from the GUI

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » Testing Your IIS Resource Hierarchy » Performing a Manual Switchover from the GUI

You can initiate a manual switchover from the LifeKeeper GUI by selecting Edit, then Resource, then In Service. For example, an In Service request executed on a backup server causes the application hierarchy to be taken out of service on the primary server and placed…

Extending a Traditional 2-Node WSFC SQL Server Cluster to a Third Node via DataKeeper

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Clustering » Extending a Traditional 2-Node WSFC SQL Server Cluster to a Third Node via DataKeeper

When replicating from a WSFC SQL Server 2-node cluster to a third node via DataKeeper, the following tasks are required: Replace the existing WSFC physical disk resource with a DataKeeper volume resource that supports data replication. Change the quorum type to…

Manual Creation of a Mirror in WSFC

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Clustering » Creating a DataKeeper Volume Resource in WSFC » Manual Creation of a Mirror in WSFC

Wait until the mirrors are in the Mirroring state. Create an Empty Application. Open the Microsoft Windows Failover Cluster GUI Right-click on Services and Applications (in Windows 2012, right-click on Roles) Expand More Actions (not in Windows…

Duplicate IP Addresses Disallowed Within a Job

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Restrictions » Duplicate IP Addresses Disallowed Within a Job

A DataKeeper job contains the endpoint information for all mirrors that are part of the job. This information includes the host name, IP address, and drive letter of each mirror endpoint. Within a job, an IP address cannot be duplicated on more than one node. For…

Performing Offline Maintenance On A Shared Disk

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Maintenance Tasks » Performing Offline Maintenance On A Shared Disk

When performing offline maintenance on a shared SCSI host adapter or a disk on a shared bus, you must stop LifeKeeper and power down all servers and shared disks. Perform these actions in the following order: Stop LifeKeeper. Use the Services tool to stop the…

Maintaining a SIOS Protection Suite Protected System

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Maintenance Tasks » Maintaining a SIOS Protection Suite Protected System

When performing shutdown and maintenance on a SIOS Protection Suite-protected server, you must put that system’s resource hierarchies in-service on the backup server before performing maintenance. This process stops all activity for shared disks on the system needing…

Creating a DataKeeper Volume Resource in WSFC

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Clustering » Creating a DataKeeper Volume Resource in WSFC

Automatic Creation of a Mirror in WSFC Use the SIOS DataKeeper GUI to configure a mirror. At the completion of the mirror creation operation, the following dialog box will pop up which will allow you to automatically add the mirror as a DataKeeper volume…

Safe Creation of a Shared-Storage Volume Resource

SIOS DataKeeper for Windows Technical Documentation » User Guide » Configuring Mirrors » Safe Creation of a Shared-Storage Volume Resource

DataKeeper allows mirrors to be created on shared volumes where more than one system has access to the same physical storage. The shared volume can be on the source side of the mirror or on the target side. Note: Dynamic disks are not supported with Shared Storage…

SIOS DataKeeper Signal Reporting to a SIOS iQ Appliance

SIOS DataKeeper for Windows Technical Documentation » Administration » SIOS DataKeeper Signal Reporting to a SIOS iQ Appliance

Introduction SIOS DataKeeper includes a set of tools and configuration files that can be used to report Windows events to a SIOS iQ appliance. SIOS iQ is an IT Analytics system that can be used to optimize your computing infrastructure through the use of machine…

Recovering From Databases in Suspect State After a Switchover

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Hierarchy Administration » Recovering From Databases in Suspect State After a Switchover

A database which gets marked as suspect may be caused by starting Microsoft SQL Server when the volume(s) on which it resides is unavailable to this system. When SIOS Protection Suite is used to protect SQL databases, the starting and stopping of SQL should be…

Running the GUI Application on a SIOS Protection Suite Server

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » LifeKeeper GUI » Running the GUI Application on a SIOS Protection Suite Server

You can also run the LifeKeeper GUI as an application on a SIOS Protection Suite server. By doing so, you are, in effect, running the GUI client and server on the same system. Only users with administrator privileges on the SIOS Protection Suite server are allowed to…

Using a Non-Admin Local System Account on Target System

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Installation » Using a Non-Admin Local System Account on Target System

There are certain cases where the SQL Server service account (sql_svc) cannot be added to the local admin or domain admin groups. In such cases, there will be permission problems on the files for that service account. Users will notice “Access Denied” errors like…

Configuration of Data Replication From a Cluster Node to External DR Site

SIOS DataKeeper for Windows Technical Documentation » Configuration » Configuration of Data Replication From a Cluster Node to External DR Site

Create a Mirror and Rename Job and Delete Job Actions Grayed Out

SIOS DataKeeper for Windows Technical Documentation » FAQs » Create a Mirror and Rename Job and Delete Job Actions Grayed Out

Question Why are the Create a Mirror, Rename Job and Delete Job actions grayed out? Answer If a node that is part of the job is down, these actions will not be enabled.

Global Toolbar

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » LifeKeeper GUI » Toolbars » Global Toolbar

This toolbar is a combination of the default server context toolbar and resource context toolbar which are displayed on the properties panel, except that you must select a server and possibly a resource when you invoke actions from this toolbar. …

Edit Menu – Resource

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » LifeKeeper GUI » Menus » Edit Menu – Resource

This submenu of the main menu bar is the same as the default resource context menu except that you must select a resource and server when you invoke actions from this menu. The Edit > Resource menu cannot be customized. In Service. Bring a resource hierarchy into…

Resource Context Toolbar

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » LifeKeeper GUI » Toolbars » Resource Context Toolbar

The resource context toolbar is displayed in the properties panel when you select a server-specific resource instance in the status table. The default toolbar is described here but this toolbar might be customized for specific resource types in which case the custom…

Oracle Resource Configuration Tasks

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Resource Configuration Tasks

Once you have completed the setup tasks as described in the previous section, you are ready to create and extend your Oracle resource hierarchies. The following four tasks are described in this guide, as they are unique to an Oracle resource instance and different for…

Resource Context Menu

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » LifeKeeper GUI » Menus » Resource Context Menu

The resource context menu appears when you right-click on a global (cluster-wide) resource, as shown above, or a server-specific resource instance, as shown below, in the status table. The default resource context menu is described here, but this menu might be…

Server Configuration Considerations

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » Server Configuration Considerations

PostgreSQL Server Configuration Considerations Before you install and configure your PostgreSQL database clusters, it is important to understand how to configure them. It is also important to understand the concepts of Active/Standby and Active/Active configurations,…

Incomplete Resource Creation

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Troubleshooting » Incomplete Resource Creation

Description If the resource setup process is interrupted leaving instances only partially created, you must perform manual cleanup before attempting to install the hierarchy again. Use the LifeKeeper GUI to delete any partially-created resources. See Deleting a…

Adding Microsoft SQL Server Volumes

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Hierarchy Administration » Adding Microsoft SQL Server Volumes

As your environment grows, you may need to add new Microsoft SQL Server databases on new shared or replicated volumes. You should perform the following tasks to add the new volumes to the SIOS Protection Suite hierarchy before administering the new databases within…

LCDI Commands

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Advanced Topics » LCDI Commands

SIOS Protection Suite provides two mechanisms for defining an application resource hierarchy: LifeKeeper GUI LifeKeeper Configuration Database Interface (LCDI) commands The LCDI is a set of interface commands provided by SIOS Protection Suite that you can use…

IIS Resource Configuration Tasks

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » IIS Resource Configuration Tasks

The topics in this section describe the tasks involved in configuring resources. _____________________________________________________________________________________________________________________________________________________ Create an IIS Resource…

SQL Server Configuration Considerations

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Configuration Considerations

Before you install and configure your clusters, it is important to understand the concepts of Active/Standby configuration, and how multiple instances can be set up in a SQL configuration. SQL Configuration A configuration is Active/Standby when there is only one…

Server Context Toolbar

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » LifeKeeper GUI » Toolbars » Server Context Toolbar

The server context toolbar is displayed in the properties panel when you select a server in the status table. The actions are invoked for the server that you select. Disconnect. Disconnect from a cluster. Refresh. Refresh GUI.…

Installation – Replicated Storage Systems

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Installation » Installation – Replicated Storage Systems

On the Primary Server Use the Windows Disk Management tool to configure your disk resources and define the replicated volumes that you want to use. (Be sure the volume size is adequate.) It is recommended that you use Windows Explorer to unshare from the network…

Server Context Menu

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » LifeKeeper GUI » Menus » Server Context Menu

The server context menu appears when you right-click on a server in the status table. The actions are always invoked on the server that you select. View Logs. View SIOS Protection Suite log messages. Create Resource Hierarchy. Create a resource hierarchy. Create…

Edit Menu – Server

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » LifeKeeper GUI » Menus » Edit Menu – Server

This submenu of the main menu bar is the same as the default server context menu except that you must select a server when you invoke actions from this menu. The Edit > Server menu cannot be customized. View Logs. View SIOS Protection Suite log messages. Create…

Recovering Out-of-Service Hierarchies

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Troubleshooting » Recovering Out-of-Service Hierarchies

Description As a part of the recovery following the failure of a SIOS Protection Suite server, resource hierarchies that are configured on the failed server but are not in service anywhere at the time of the server failure are recovered on the highest priority alive…

View Menu

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » LifeKeeper GUI » Menus » View Menu

Expand Tree. Expand the status table to show all resources in all hierarchies. Collapse Tree. Collapse the status table to show only the top resource in each hierarchy. Row Height. Modify the row viewing size of the resources in the resource hierarchy tree and…

Before Installing Oracle

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Installation » Before Installing Oracle

Before you install the Oracle software, the servers and storage must be configured and LifeKeeper must be installed on each server in the cluster. By doing so, you can then install Oracle onto a volume that is already LifeKeeper-protected. Replicated Storage…

Oracle Overview

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Overview

The LifeKeeper Oracle Recovery Kit provides the ability to concurrently run Oracle database instances on other servers, and to optionally place these instances under LifeKeeper protection. Such a configuration is known as Active/Active and allows LifeKeeper servers to…

Intelligent Versus Automatic Switchback

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Configuration » Intelligent Versus Automatic Switchback

By default, the switchback setting of a resource is intelligent. This means that once the failover occurs for that resource from Server A to Server B, the resource remains on Server B until another failure or until an administrator intelligently switches the resource…

Oracle TNSListener Service is Not Started or Stopped as it Should Be

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Troubleshooting Tips » Oracle TNSListener Service is Not Started or Stopped as it Should Be

Suggestion Do the following: Check if at least one TCP/IP or LAN Manager resource is part of the Oracle hierarchy. Take hierarchy out of service and bring back in service to start OracleTNSListener.

Admin Actions Menu

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Configuration Considerations » Admin Actions Menu

This menu allows users to manage the SQL administrator user used during SIOS Protection Suite operations or resolve ID conflicts between the primary and backup servers encountered during the extend operation. Select Administrative Action: Manage User –…

Changing LifeKeeper Microsoft IIS Recovery Kit Configuration

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » IIS Hierarchy Administration » Changing LifeKeeper Microsoft IIS Recovery Kit Configuration

Any configuration change that affects the port number, IP address, hardware virtual servers or secure/non-secure setting, will affect the LifeKeeper configuration. As there is no direct linkage between the server and this kit, you should follow this procedure to…

Installation and Configuration – Adding PostgreSQL to an Existing LifeKeeper Configuration

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » PostgreSQL Server Installation » Installation and Configuration – Adding PostgreSQL to an Existing LifeKeeper Configuration

This section covers installation and configuration of the SIOS Protection Suite and PostgreSQL software when adding PostgreSQL to an existing LifeKeeper cluster. These steps must be followed in order. On the Primary Server: Use the Window Disk Management tool to…

Process Config Menu

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Configuration Considerations » Process Config Menu

This menu allows users to modify the list of optional SQL Processes that are protected under the resource hierarchy. SIOS Protection Suite will monitor all protected optional services (see Monitoring Your SQL Hierarchy). Select Action: Add Process – Add an…

Database Config Menu

SIOS DataKeeper for Windows Technical Documentation » NO TOC » SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Configuration Considerations » Database Config Menu

This menu allows users to modify the list of optional SQL Databases that are protected under the resource hierarchy. SIOS Protection Suite will monitor all protected optional SQL Databases by performing a SQL query to test the connection to the database (see…