The topic you requested could not be found.
Related topics are listed below.

Viewing Resource Properties

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Common Tasks » Viewing Resource Properties

To view resource properties: If the Properties Panel is enabled, simply select the server-specific resource instance in the Status Table and the properties will be displayed in the Properties Panel. If the Properties Panel is disabled, select the server-specific…

LCD Resource Types

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Advanced Topics » LCD Resource Types

The LCD is maintained in both shared memory and in the $LKROOT directory. As highlighted on the directory structure diagram, subsys contains application resource sets you can use to define your application interface: filesys – file system related resources…

Transferring Resource Hierarchies

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Maintenance Tasks » Transferring Resource Hierarchies

When you need to perform routine maintenance or other tasks on a SIOS Protection Suite Server, you can use the LifeKeeper GUI to move in-service resources to another server. To transfer in-service resource hierarchies from Server A to Server B, use the GUI to bring the…

Resource Context Menu

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » LifeKeeper GUI » Menus » Resource Context Menu

The resource context menu appears when you right-click on a global (cluster-wide) resource, as shown above, or a server-specific resource instance, as shown below, in the status table. The default resource context menu is described here, but this menu might be…

Incomplete Resource Creation

SIOS Protection Suite for Windows » Troubleshooting » Incomplete Resource Creation

Description If the resource setup process is interrupted leaving instances only partially created, you must perform manual cleanup before attempting to install the hierarchy again. Use the LifeKeeper GUI to delete any partially-created resources. See Deleting a…

Resource Context Toolbar

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » LifeKeeper GUI » Toolbars » Resource Context Toolbar

The resource context toolbar is displayed in the properties panel when you select a server-specific resource instance in the status table. The default toolbar is described here but this toolbar might be customized for specific resource types in which case the custom…

Edit Menu – Resource

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » LifeKeeper GUI » Menus » Edit Menu – Resource

This submenu of the main menu bar is the same as the default resource context menu except that you must select a resource and server when you invoke actions from this menu. The Edit > Resource menu cannot be customized. In Service. Bring a resource hierarchy into…

Resource Tag Name Restrictions

Resource Tag Name Restrictions

Tag Name Length All tags within DataKeeper may not exceed the 256 character limit. Valid “Special” Characters - _ . / However, the first character in a tag should not contain “.” or “/”. Invalid…

IP Resource Create Issue

SIOS Protection Suite for Windows » Troubleshooting » IP Resource Create Issue

Symptom IP resource Pre-Extend Wizard can fail if new IP address partially matches an existing IP address. Workaround Currently no workaround is available. This will be addressed in a future release.

Resource Hierarchy for Oracle

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Resource Hierarchy for Oracle

The typical Oracle resource hierarchy consists of the following resources: Oracle Shared communication resource (IP or LAN Manager alias name) Volume(s) All Oracle data, log, and trace (core database) files for the protected SID are stored on shared or…

Non-mirrored Volume Resource

SIOS Protection Suite for Windows » Clustering » Non-mirrored Volume Resource

A non-mirrored volume resource is a DataKeeper resource where no data is replicated to any node in the cluster. This resource type should only be used where the data is temporary and/or non-critical such as MS SQL Server tempdb space. In this case, when MS SQL restarts…

IIS Resource Configuration Tasks

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » IIS Resource Configuration Tasks

The topics in this section describe the tasks involved in configuring resources. _____________________________________________________________________________________________________________________________________________________ Create an IIS Resource…

Resource Tag Name Restrictions

SIOS Protection Suite for Windows » Troubleshooting » Resource Tag Name Restrictions

Tag Name Length All tags within SIOS Protection SuiteDataKeeper may not exceed the 256 character limit. Valid “Special” Characters - _ . / However, the first character in a tag should not contain…

Oracle Resource Configuration Tasks

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Resource Configuration Tasks

Once you have completed the setup tasks as described in the previous section, you are ready to create and extend your Oracle resource hierarchies. The following four tasks are described in this guide, as they are unique to an Oracle resource instance and different for…

Maintaining a Resource Hierarchy

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Maintenance Tasks » Maintaining a Resource Hierarchy

You can perform maintenance on a resource hierarchy while maintaining SIOS Protection Suite protection of all other hierarchies on the system. This involves taking the hierarchy in need of maintenance out of service and then bringing it back in service after you…

DataKeeper Volume Resource Private Properties

SIOS Protection Suite for Windows » Clustering » DataKeeper Volume Resource Private Properties

A DataKeeper Volume resource includes several private properties that are used by DataKeeper Cluster Edition. Among these properties are: VolumeLetter (REG_SZ) – the volume letter that is replicated by DataKeeper and associated with this DataKeeper Volume…

Create an IIS Resource Hierarchy

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » IIS Resource Configuration Tasks » Create an IIS Resource Hierarchy

Before creating your IIS hierarchy, be sure you have created the associated IP and volume (if needed) resource hierarchies first. To create a resource instance from the primary server, you should complete the following steps: From the LifeKeeper GUI menu, select…

WSFC – MS DTC Resource Failure

WSFC – MS DTC Resource Failure

Error/Message The cluster resource host subsystem (RHS) stopped unexpectedly. An attempt will be made to restart it. This is usually due to a problem in a resource DLL. Please determine which resource DLL is causing the issue and report the problem to the resource…

Viewing Resource Tags and IDs

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Common Tasks » Viewing Resource Tags and IDs

A resource’s tag and ID can be viewed quickly by positioning the cursor over a resource icon in the status window and clicking the left mouse button once (single-click). The resource tag and ID of the server having the lowest priority number are displayed in the…

Bringing A Resource In Service

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Operator Tasks » Bringing A Resource In Service

To bring a resource in service: Select a server-specific resource instance that you want to bring in service and then select In Service from the Resource Context Menu or Resource Context Toolbar. A dialog appears confirming the server and resource(s) that you…

DataKeeper Volume Resource Health Check

SIOS Protection Suite for Windows » Clustering » DataKeeper Volume Resource Health Check

A DataKeeper Volume resource provides two functions that are used by the Microsoft Cluster service to check for availability and health of the DataKeeper Volume resource. A simple check LooksAlive and a more rigorous check IsAlive. LooksAlive The Cluster service…

Testing Your IIS Resource Hierarchy

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » Testing Your IIS Resource Hierarchy

The topics in this section assist in testing your IIS resource hierarchy. _____________________________________________________________________________________________________________________________________________________ Performing a Manual Switchover from the…

Delete an IIS Resource Hierarchy

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » IIS Resource Configuration Tasks » Delete an IIS Resource Hierarchy

To delete a resource hierarchy from all the servers in your LifeKeeper environment, complete the following steps: From the LifeKeeper GUI menu, select Edit then Resource. From the drop down menu, select Delete Resource Hierarchy. Select the Target Server where…

Testing Your Oracle Resource Hierarchy

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Resource Configuration Tasks » Testing Your Oracle Resource Hierarchy

You can test your Oracle resource hierarchy by initiating a manual switchover. This will simulate a failover of a resource instance from the primary server to the backup server. You can select Edit, then Resource, then In Service. For example, an In Service request…

Testing Your SQL Resource Hierarchy

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Configuration Considerations » Testing Your SQL Resource Hierarchy

You can test your SQL resource hierarchy by initiating a manual switchover. This will simulate a failover of a resource instance from the primary server to the backup server. Selecting Edit, then Resource, then In Service. For example, an In Service request executed…

Testing Your PostgreSQL Resource Hierarchy

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » Server Configuration Considerations » Testing Your PostgreSQL Resource Hierarchy

You can test your PostgreSQL resource hierarchy by initiating a manual switchover. This will simulate a failover of a resource instance from the primary server to the backup server. Select Edit, then Resource, then In Service. For example, an In Service request…

Extend an IIS Resource Hierarchy

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » IIS Resource Configuration Tasks » Extend an IIS Resource Hierarchy

This operation can be started from the Edit menu or initiated automatically upon completing the Create IIS Resource Hierarchy option, in which case you should refer to Step 2 below. On the Edit menu, select Resource then Extend Resource Hierarchy. The Pre-Extend…

Creating Other Server Resource in WSFC

SIOS Protection Suite for Windows » Clustering » Creating Other Server Resource in WSFC

When creating an Other Server resource in WSFC, you will be prompted for a storage resource (DataKeeper resource) twice. You will check the first one, but do not need to check the second dialog. Click the “checkbox” for the first dialog “Select…

Extend of a SQL Resource Fails

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » Troubleshooting » Extend of a SQL Resource Fails

Symptom: The Extend of a Microsoft SQL resource will fail if the primary and backup configurations are different (i.e. Microsoft SQL ID mismatch). Below is an example of the error message displayed in the LifeKeeper GUI during the can extend operation: Process:…

User Resource Name For Remote Access

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Hierarchy Administration » User Resource Name For Remote Access

Unless the application is cluster-aware, when using Microsoft SQL Enterprise Manager to administer the service, you should register it by the switchable resource name (the name by which users access the server using TCP/IP). This gives you a continuous monitor of the…

Taking a Resource Out Of Service

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Operator Tasks » Taking a Resource Out Of Service

To take a resource out of service: Select a server-specific resource instance that you want to take out of service and then select Out of Service from the Resource Context Menu or Resource Context Toolbar. A dialog appears confirming the selected resource(s) to…

Win2008 – IIS Resource Hierarchy Creation Error

SIOS Protection Suite for Windows » Troubleshooting » Win2008 – IIS Resource Hierarchy Creation Error

Symptom On a Win2008 system when creating an IIS Resource Hierarchy, you receive the following message: No qualified sites were found… and the create fails. BACKGROUND /…

Creating a DataKeeper Volume Resource in WSFC

SIOS Protection Suite for Windows » Clustering » Creating a DataKeeper Volume Resource in WSFC

Automatic Creation of a Mirror in WSFC Use the SIOS DataKeeper GUI to configure a mirror. At the completion of the mirror creation operation, the following dialog box will pop up which will allow you to automatically add the mirror as a DataKeeper volume…

Expanding and Collapsing A Resource Hierarchy Tree

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Common Tasks » Expanding and Collapsing A Resource Hierarchy Tree

The resource MSExch.0 is collapsed in this tree. The resource MSExch.0 is expanded in this tree. appears if it is collapsed. appears to the left of a resource icon if it is expanded. To expand a resource hierarchy, click the …

Safe Creation of a Shared-Storage Volume Resource

SIOS DataKeeper for Windows Technical Documentation » User Guide » Configuring Mirrors » Safe Creation of a Shared-Storage Volume Resource

DataKeeper allows mirrors to be created on shared volumes where more than one system has access to the same physical storage. The shared volume can be on the source side of the mirror or on the target side. Note: Dynamic disks are not supported with Shared Storage…

DataKeeper Volume Not Available as Cluster Resource Type

DataKeeper Volume Not Available as Cluster Resource Type

WSFC Server – The DataKeeper Volume is Not Available as a Cluster Resource Type After DataKeeper is Installed in a Microsoft WSFC Environment Error/Message The DataKeeper Volume is not available as a cluster resource type after DataKeeper is installed in a…

WSFC 2012 File Server Resource Manager Event Log Errors

WSFC 2012 File Server Resource Manager Event Log Errors

Description In Windows 2012, if a File Server Role is created which uses one or more DataKeeper Volume resources and the File Server Resource Manager feature is enabled on the system, then a series of “SRMSVC” errors (ID 8228) will be received on the…

Licensing – Licensed Recovery Kit Resource Fails to Come In Service

SIOS Protection Suite for Windows » Troubleshooting » Licensing – Licensed Recovery Kit Resource Fails to Come In Service

Symptom After upgrade, licensed recovery kit resource fails to come in service and the following error is logged to the Application Event Log by SIOS Protection Suite: “Process: lcdmachfail(3176) *ERROR* (No. 1001) resource requires a license (for Kit )…

Monitoring Replicated Volume Resources

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Data Replication » Monitoring Replicated Volume Resources

The state of all SIOS Protection Suite protected replicated volume resources is displayed in the LifeKeeper GUI. Refer to the SIOS DataKeeper topic, Mirror State Definitions, for details on mirror states. The example below shows that the mirror state of the replicated…

LCD Configuration Data

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Advanced Topics » LCD Configuration Data

LCD stores the following related types of data: Dependency Information Resource Status Information Inter-Server Equivalency Information Dependency Information For each defined resource, SIOS Protection Suite maintains a list of dependencies and a list of…

UPDATECLUSTERTARGET STATEPROPERTIES

UPDATECLUSTERTARGET STATEPROPERTIES

EMCMD UPDATECLUSTERTARGET STATEPROPERTIES This command will update the TargetState private properties for all clustered DataKeeper volumes for which the given system is the source. This is the system whose volume states will be checked. For…

Status Table

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » LifeKeeper GUI » GUI Overview » Status Table

The status table provides a visual representation of the status of connected servers and their resources. It shows the following. The state of each server in the top row The global (cross-server) state and the parent-child relationships of each resource in the…

Viewing Connected Servers

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Common Tasks » Viewing Connected Servers

The state of a server can be determined by looking at the graphic representation of the server in the GUI as shown below. See Viewing the Status of a Server for an explanation of the server states indicated visually by the server icon.

Viewing the Status of Resources

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Common Tasks » Viewing the Status of Resources

The status or state of a resource is displayed in two formats: global resource status (across all servers) and server resource status (on a single server). The global resource status is shown in the Resource Hierarchy Tree in the left pane of the status window. The…

Mirror State Definitions

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » Mirror State Definitions

The following numbers are used by the system to internally describe the various states. They are used by EMCMD, and they are also the state numbers found in event log entries. -1: Invalid State 0: No Mirror 1: Mirroring 2: Mirror is resyncing 3: Mirror is…

Extending a Clustered DataKeeper Volume to a Node Outside the Cluster

SIOS Protection Suite for Windows » Clustering » Extending a Clustered DataKeeper Volume to a Node Outside the Cluster

DataKeeper Volume cluster resources can be extended to a DR Node for Disaster Recovery purposes. In the event of a complete failure of all systems in the cluster, data will be accessible on the DR Node (referred to as the “DR Node”). Here you will find instructions…

Unextending a SQL Hierarchy

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Installation » Unextending a SQL Hierarchy

To remove a resource hierarchy from a single server in the SIOS Protection Suite cluster, do the following: On the Edit menu, select Resource, then Unextend Resource Hierarchy. Select the Target Server where you want to unextend the SQL resource. It cannot be…

Unextending an Oracle Hierarchy

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Resource Configuration Tasks » Unextending an Oracle Hierarchy

To remove a resource hierarchy from a single server in the LifeKeeper cluster, do the following: On the Edit menu, select Resource, then Unextend Resource Hierarchy. Select the Target Server where you want to unextend the Oracle resource. It cannot be the server…

Global Toolbar

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » LifeKeeper GUI » Toolbars » Global Toolbar

This toolbar is a combination of the default server context toolbar and resource context toolbar which are displayed on the properties panel, except that you must select a server and possibly a resource when you invoke actions from this toolbar. …

Resources Subdirectories

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Advanced Topics » Resources Subdirectories

The filesys, comm, WebServer, database, mail and appsuite directories each contain a resources subdirectory. The content of those directories provides a list of the resource types that are currently defined and managed by SIOS Protection Suite: filesys resource…

Unextending a PostgreSQL Hierarchy

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » Server Configuration Considerations » Unextending a PostgreSQL Hierarchy

To remove a resource hierarchy from a single server in the SIOS Protection Suite cluster, do the following: On the Edit menu, select Resource, then Unextend Resource Hierarchy. Select the Target Server where you want to unextend the SQL resource. It cannot be…

Unextend Your IIS Hierarchy

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » IIS Resource Configuration Tasks » Unextend Your IIS Hierarchy

To unextend your IIS hierarchy from a system: From the LifeKeeper GUI menu, select Edit then Resource. From the drop down menu, select Unextend Resource Hierarchy. Select the Target Server where you want to unextend the IIS resource. It cannot be the server…

Deleting a SQL Hiearchy

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Installation » Deleting a SQL Hiearchy

Before deleting a SQL hierarchy or instance, make sure that the hierarchy is active (green) on its primary server. You may also wish to remove the dependencies before deleting the hierarchy; otherwise, the dependencies will be deleted also. To delete a resource…

Deleting a PostgreSQL Hiearchy

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » Server Configuration Considerations » Deleting a PostgreSQL Hiearchy

Before deleting a PostgreSQL hierarchy or instance, make sure that the hierarchy is active (green) on its primary server. You may also wish to remove the dependencies before deleting the hierarchy; otherwise, the dependencies will also be deleted. To delete a resource…

Intelligent Versus Automatic Switchback

SIOS Protection Suite for Windows » Configuration » Intelligent Versus Automatic Switchback

By default, the switchback setting of a resource is intelligent. This means that once the failover occurs for that resource from Server A to Server B, the resource remains on Server B until another failure or until an administrator intelligently switches the resource…

Adding Microsoft SQL Server Volumes

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Hierarchy Administration » Adding Microsoft SQL Server Volumes

As your environment grows, you may need to add new Microsoft SQL Server databases on new shared or replicated volumes. You should perform the following tasks to add the new volumes to the SIOS Protection Suite hierarchy before administering the new databases within…

Deleting an Oracle Hierarchy

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Resource Configuration Tasks » Deleting an Oracle Hierarchy

Before deleting an Oracle hierarchy or instance, make sure that the hierarchy is active (green) on its primary server. You may also wish to remove the dependencies before deleting the hierarchy; otherwise, the dependencies will be deleted also. Deleting an Oracle…

Manual Creation of a Mirror in WSFC

SIOS Protection Suite for Windows » Clustering » Creating a DataKeeper Volume Resource in WSFC » Manual Creation of a Mirror in WSFC

Wait until the mirrors are in the Mirroring state. Create an Empty Application. Open the Microsoft Windows Failover Cluster GUI Right-click on Services and Applications (in Windows 2012, right-click on Roles) Expand More Actions (not in Windows…

Using DKCE to Enable Multi-Site File Share Resources with Windows Server 2008R2 WSFC

SIOS Protection Suite for Windows » Clustering » Using DKCE to Enable Multi-Site File Share Resources with Windows Server 2008R2 WSFC

Use the following procedure to protect File Share resources using SIOS DataKeeper and Microsoft Failover Cluster (WSFC). *IMPORTANT NOTE: DataKeeper Cluster Edition registration with Failover Cluster is automatic and occurs 60 seconds after detecting a Failover…

Monitoring Your PostgreSQL Hierarchy

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » PostgreSQL Server Hierarchy Administration » Monitoring Your PostgreSQL Hierarchy

SIOS Protection Suite monitors the PostgreSQL database cluster services for every PostgreSQL resource. If the services stop, the monitoring process associated with the PostgreSQL resource will detect this and attempt to restart the services on the local server if Local…

Maintaining SQL Server Login and Passwords

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Hierarchy Administration » Maintaining SQL Server Login and Passwords

During the creation of a SIOS Protection Suite SQL resource, the user must enter a SQL administrative username and password for that instance of Microsoft SQLServer. Should the password of this username change at some point in the future, the SQL resource must be…

Volume Locking for Shared SCSI Volumes

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Operator Tasks » Volume Locking for Shared SCSI Volumes

When you want to protect resources on shared SCSI disks, you partition the shared disk into logical volumes using the Windows Disk Management tool. SIOS Protection Suite can protect shared volumes by defining a volume resource instance. Each instance is assigned a…

LifeKeeper Configuration Database (LCD)

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Advanced Topics » LifeKeeper Configuration Database (LCD)

The LifeKeeper configuration database (LCD) maintains the object-oriented resource hierarchy information and stores recovery direction information for all resource types known to SIOS Protection Suite. The data is cached within system shared memory and stored in files…

Updating Oracle Username and Password for LifeKeeper

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Hierarchy Administration » Updating Oracle Username and Password for LifeKeeper

During the creation of a LifeKeeper Oracle resource, the user must enter an Oracle user name and password for that instance of Oracle. Should the password of this user name change at some point in the future, the LifeKeeper Oracle resource must be updated on all…

Restore and Health Check Account Failures

SIOS Protection Suite for Windows » Troubleshooting » Restore and Health Check Account Failures

Symptom Some recovery kits monitor protected resources by performing query operations that simulate user and/or client activity. This provides SIOS Protection Suite with accurate status information about a protected application or service. It also requires that a…

Managing DNS Resources

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Maintenance Tasks » Managing DNS Resources

To change the Domain administrative user and password associated with a protected DNS resource from the LifeKeeper GUI, right-click on the DNS resource (on the right-hand side of the LifeKeeper GUI) and select Properties, then select the Resource Settings tab. Select…

WSFC 2012 Failover Cluster Manager UI Defect (Delete Action Missing)

WSFC 2012 Failover Cluster Manager UI Defect (Delete Action Missing)

Description On Windows Server 2012, the Microsoft Failover Cluster Manager UI tool has a defect. When a “right-click” is performed on a DataKeeper Volume resource from the Available Storage group, the drop-down action list does not appear. That action list would…

Extending a PostgreSQL Hierarchy

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » Server Configuration Considerations » Extending a PostgreSQL Hierarchy

This operation can be started from the Edit menu or initiated automatically upon completing the Create Resource Hierarchy option, in which case you should refer to Step 2 below. From the Edit menu, select Resource then Extend Resource Hierarchy. The Pre-Extend…

Monitoring Your SQL Hierarchy

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Hierarchy Administration » Monitoring Your SQL Hierarchy

For every SQL resource, SIOS Protection Suite monitors the Microsoft SQL Server service and any optional services selected during the creation of the SQL hierarchy or added at a later time. Should any of these services stop, the monitoring process associated with the…

Extending a Traditional 2-Node WSFC Cluster to a Third Node via DataKeeper

SIOS Protection Suite for Windows » Clustering » Extending a Traditional 2-Node WSFC Cluster to a Third Node via DataKeeper

When replicating from a WSFC 2-node cluster to a third node via DataKeeper, the following tasks are required: Replace the existing WSFC physical disk resource with a DataKeeper volume resource that supports data replication. Change the quorum type to Node…

Managing a SQL Server Configuration

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Configuration Considerations » Managing a SQL Server Configuration

To administer a protected SQL Server resource from the LifeKeeper GUI, right-click on the SQL Server resource (on the right-hand side of the LifeKeeper GUI) and select properties, then select the SQL Server Configuration tab. Use the SQL Server Configuration page to…

View Menu

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » LifeKeeper GUI » Menus » View Menu

Expand Tree. Expand the status table to show all resources in all hierarchies. Collapse Tree. Collapse the status table to show only the top resource in each hierarchy. Row Height. Modify the row viewing size of the resources in the resource hierarchy tree and…

Common Tasks

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Common Tasks

This section covers basic tasks that can be performed by any user. __________________________________________________________________________________________________________________________________________________ Connecting To A Cluster Disconnecting From a…

Access Via Protected Communication Paths

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » PostgreSQL Server Hierarchy Administration » Access Via Protected Communication Paths

All remote access of the service should be done through the hierarchy’s LifeKeeper network resources. This will ensure that users can access the PostgreSQL database cluster regardless of which server it is currently running on. *Note: Currently the PostgreSQL…

Disabling the FTP Deep Check Process

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » IIS Hierarchy Administration » Disabling the FTP Deep Check Process

If the protected FTP site does not permit anonymous logins and you prefer not to use a login script as described above, you may disable the deep check process for a particular LifeKeeper protected resource. Change directory to the LifeKeeper “bin” folder…

Clustering

SIOS Protection Suite for Windows » Clustering

Running chkdsk on Cluster Volumes during Cluster Volume Online Creating a DataKeeper Volume Resource in WSFC Manual Creation of a Mirror in WSFC DataKeeper Volume Resource Health Check DataKeeper Volume Resource Private Properties Extending a Clustered DataKeeper…

Extending an Oracle Hierarchy

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Resource Configuration Tasks » Extending an Oracle Hierarchy

This operation can be started from the Edit menu or initiated automatically upon completing the Create Resource Hierarchy option in which case you should refer to Step 2 below. On the Edit menu, select Resource, then Extend Resource Hierarchy. The Pre-Extend Wizard…

Creating and Protecting Additional PostgreSQL Database Clusters

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » PostgreSQL Server Hierarchy Administration » Creating and Protecting Additional PostgreSQL Database Clusters

As your environment grows, you may need to add new PostgreSQL Server database clusters on existing or new shared or replicated volumes. To add and protect a new database cluster and the associated volume follow these steps: Create the volume resource. On the server…

Installing and Configuring LifeKeeper with Oracle

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Installation » Installing and Configuring LifeKeeper with Oracle

The LifeKeeper with Oracle installation and configuration procedure differs slightly for replicated storage systems and shared stored systems. We have created separate sections in this document for each type of storage configuration in an effort to clarify the…

EditFileShareResource Utility

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Maintenance Tasks » EditFileShareResource Utility

The EditFileShareResource utility can be used to update a file share resource with all current file shares on the associated volume(s). This can be useful in environments where there are a large number of file shares and file shares have been added or deleted since the…

Menus

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » LifeKeeper GUI » Menus

SIOS Protection Suite for Windows Menus ___________________________________________________________________________________________________________________________________________________ Resource Context Menu Server Context Menu File Menu Edit Menu –…

Properties Panel

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » LifeKeeper GUI » GUI Overview » Properties Panel

The properties panel displays the properties of the server or resource that is selected in the status table. The properties panel has the same functionality as the server properties dialog or the resource properties dialog plus a context-sensitive toolbar to provide…

Troubleshooting

SIOS Protection Suite for Windows » Troubleshooting

The topics in this section contain important information about known issues and restrictions offering possible workarounds and/or solutions. ________________________________________________________________________________________________________________ Applet…

Create Fails

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » Troubleshooting » Create Fails

Symptom: The Create of a PostgreSQL Server resource will fail if the database cluster data directory is located on a volume and that volume is not already protected by SIOS Protection Suite. Suggested Action: Create the volume resource for the data…

Extending a Traditional 2-Node WSFC SQL Server Cluster to a Third Node via DataKeeper

SIOS Protection Suite for Windows » Clustering » Extending a Traditional 2-Node WSFC SQL Server Cluster to a Third Node via DataKeeper

When replicating from a WSFC SQL Server 2-node cluster to a third node via DataKeeper, the following tasks are required: Replace the existing WSFC physical disk resource with a DataKeeper volume resource that supports data replication. Change the quorum type to…

Extending a SQL Hierarchy

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Installation » Extending a SQL Hierarchy

This operation can be started from the Edit menu or initiated automatically upon completing the Create Resource Hierarchy option, in which case you should refer to Step 2 below. From the Edit menu, select Resource then Extend Resource Hierarchy. The Pre-Extend…

Configuring Generic Application Scripts

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Maintenance Tasks » Configuring Generic Application Scripts

Use this feature to update a script that has been created to protect an application that has no associated SIOS Protection Suite Recovery Kit. Right-click on the generic application resource and select Properties. Select the SIOS Protection Suite Generic Application…

SIOS Protection Suite Configurations

SIOS Protection Suite for Windows » Configuration » SIOS Protection Suite Configurations

SIOS Protection Suite works on the basis of resource hierarchies you define for groups of two or more servers. The following three topics introduce the SIOS Protection Suite failover configuration concepts. Common Hardware Components System Grouping…

DataKeeper Volume cannot come Online after Network failure with clustered IP Address on Replication network

DataKeeper Volume cannot come Online after Network failure with clustered IP Address on Replication network

If you have multiple cluster networks, IP Addresses shouldn’t be set up on the same network that DataKeeper Volume resources are using for replication. Network errors may cause the DataKeeper mirror to go into a Paused state. If the network error also causes the…

Admin Actions Menu

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Configuration Considerations » Admin Actions Menu

This menu allows users to manage the SQL administrator user used during SIOS Protection Suite operations or resolve ID conflicts between the primary and backup servers encountered during the extend operation. Select Administrative Action: Manage User –…

New Resources Offline But Unlocked

New Resources Offline But Unlocked

WSFC Server – Newly Created Resources Appear Offline But Are Unlocked Error/Message Newly created resources appear offline but are unlocked. Description The new resource is always offline and unlocked before it is used. Suggested Action Switch the resource…

Manage Oracle Database Configuration

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Resource Configuration Tasks » Manage Oracle Database Configuration

To administer a protected Oracle resource from the LifeKeeper GUI, right-click on the Oracle resource (on the right-hand side of the LifeKeeper GUI) and select properties, then select the Oracle Database Configuration tab. Use the Oracle Database Configuration page to…

Managing IP Resources

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Maintenance Tasks » Managing IP Resources

To view configuration information associated with a protected IP resource from the LifeKeeper GUI, right-click on the IP resource (on the right-hand side of the LifeKeeper GUI) and select Properties, then select the IP Configuration tab. The example below shows the…

LCDI Commands

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Advanced Topics » LCDI Commands

SIOS Protection Suite provides two mechanisms for defining an application resource hierarchy: LifeKeeper GUI LifeKeeper Configuration Database Interface (LCDI) commands The LCDI is a set of interface commands provided by SIOS Protection Suite that you can use…

Operator Tasks

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Operator Tasks

This section covers more advanced tasks that require Operator permission such as bringing resources in and out of…

SQLAgent Service Fails to Start

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » Troubleshooting » SQLAgent Service Fails to Start

SQLAgent Service Fails to Start Sometimes for Named Instances Symptom: On named instances of Microsoft SQL Server where SIOS Protection Suite is protecting the SQLAgent service, when the resource is originally brought in service, a SQL problem prevents this service…

Oracle Overview

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Overview

The LifeKeeper Oracle Recovery Kit provides the ability to concurrently run Oracle database instances on other servers, and to optionally place these instances under LifeKeeper protection. Such a configuration is known as Active/Active and allows LifeKeeper servers to…

Displaying List of Protected File Shares

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Maintenance Tasks » Displaying List of Protected File Shares

To display the list of file shares associated with a protected file share resource from the LifeKeeper GUI, right-click on the File Share resource (on the right-hand side of the LifeKeeper GUI) and select Properties, then select the Protected Share List tab. …

Installation – Replicated Storage Systems

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Installation » Installation – Replicated Storage Systems

On the Primary Server Use the Windows Disk Management tool to configure your disk resources and define the replicated volumes that you want to use. (Be sure the volume size is adequate.) It is recommended that you use Windows Explorer to unshare from the network…

Changing LifeKeeper Microsoft IIS Recovery Kit Configuration

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » IIS Hierarchy Administration » Changing LifeKeeper Microsoft IIS Recovery Kit Configuration

Any configuration change that affects the port number, IP address, hardware virtual servers or secure/non-secure setting, will affect the LifeKeeper configuration. As there is no direct linkage between the server and this kit, you should follow this procedure to…