Search
Related topics are listed below.
Using DKCE to Enable Multi-Site File Share Resources with Windows Server 2008R2 WSFC
NO TOC » SIOS Protection Suite for Windows » Clustering » Using DKCE to Enable Multi-Site File Share Resources with Windows Server 2008R2 WSFC
Use the following procedure to protect File Share resources using SIOS DataKeeper and Microsoft Failover Cluster (WSFC). *IMPORTANT NOTE: DataKeeper Cluster Edition registration with Failover Cluster is automatic and occurs 60 seconds after detecting a Failover…
Windows Server 2012 Specific Issues
SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Windows Server 2012 Specific Issues
For issues related to Windows Server 2012, see the following topics: __________________________________________________________________________________________________________________ Windows Server 2012 MMC Snap-in Crash Windows Server 2012 iSCSI Target Role Does…
Server Login Accounts and Passwords Must Be Same on Each Server in the Cluster
SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Server Login Accounts and Passwords Must Be Same on Each Server in the Cluster
The DataKeeper GUI cannot connect to the target server in a cluster if server Login Accounts and Passwords are different on each server. Error Message An Error Code 1326 will appear in the Application log (Note: The Error Code may also be a 2 with Event ID…
Creating Other Server Resource in WSFC
NO TOC » SIOS Protection Suite for Windows » Clustering » Creating Other Server Resource in WSFC
When creating an Other Server resource in WSFC, you will be prompted for a storage resource (DataKeeper resource) twice. You will check the first one, but do not need to check the second dialog. Click the “checkbox” for the first dialog “Select…
Windows Server 2012 NIC Teaming Issue
SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Windows Server 2012 Specific Issues » Windows Server 2012 NIC Teaming Issue
If you use the NIC Teaming feature of Windows Server 2012, Windows 2012 will report only one adapter MAC address for the license. If you have many underlying adapters, the MAC address will arbitrarily change and Windows may pick one of the adapters that may no longer…
Windows Server 2012 iSCSI Target Role Does Not Support Dynamic Disks
SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Windows Server 2012 Specific Issues » Windows Server 2012 iSCSI Target Role Does Not Support Dynamic Disks
Description The iSCSI Target Role only supports DataKeeper Volumes that are mirrors of Simple Volumes placed on Basic Disks. If any of your mirrors are using volumes such as Striped or Spanned volumes on a Dynamic Disk on either the source or target system, then you…
Installing and Using DataKeeper Cluster Edition on Windows Server 2008 R2 / 2012 Core Platforms
NO TOC » SIOS Protection Suite for Windows » Clustering » Installing and Using DataKeeper Cluster Edition on Windows Server 2008 R2 / 2012 Core Platforms
Prepare the servers. Install Windows Server 2008 R2/2012 Core on two servers, configure IP, join a domain, configure firewall for remote administration, configure the server for remote access and install the Failover Cluster feature. Server Core Installation…
Windows Server 2012 MMC Snap-in Crash
SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Windows Server 2012 Specific Issues » Windows Server 2012 MMC Snap-in Crash
Description When using the DataKeeper user interface (MMC Snap-in) on Windows Server 2012, the mmc.exe process may crash unexpectedly due to an internal .Net or Windows Presentation Foundation (WPF) issue. The error may show up on the screen and/or the event…
Directory for Bitmap Must Be Created Prior to Relocation
SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Restrictions » Directory for Bitmap Must Be Created Prior to Relocation
Description If you choose to relocate the bitmap file from the default location (%EXTMIRRBASE%\Bitmaps), you must first create the new directory before changing the location in the registry and rebooting the system.
Primary Server Shutdown
SIOS DataKeeper for Windows Technical Documentation » Administration » Primary Server Shutdown
On a graceful shutdown of the source server, all pending writes to the target are completed. This ensures that all data is present on the target system. On an unexpected source server failure, the Intent Log feature eliminates the need to do a full resync after the…
Secondary Server Failures
SIOS DataKeeper for Windows Technical Documentation » Administration » Secondary Server Failures
In the event there is a failure affecting the secondary (target) system, the affected mirror is marked Paused. It is necessary to correct the condition that caused the secondary to fail and then resync the volumes. There are no write attempts made to the target after…
Connecting to a Server
SIOS DataKeeper for Windows Technical Documentation » User Guide » Setup » Connecting to a Server
Use this dialog to connect to the server of your choice. You may enter the IP address, system NetBIOS name or the full system domain name for the server. Click Connect to select it.
Disconnecting from a Server
SIOS DataKeeper for Windows Technical Documentation » User Guide » Setup » Disconnecting from a Server
Use this dialog to disconnect from a server. You may use this option if you no longer wish to view the server in the Administration Window. From the list of servers, select the server(s) that you wish to disconnect from and click Disconnect.
Using Microsoft iSCSI Target With DataKeeper on Windows 2012
SIOS DataKeeper for Windows Technical Documentation » User Guide » Using Microsoft iSCSI Target With DataKeeper on Windows 2012
The following topics will guide you in setting up Microsoft iSCSI Target with DataKeeper via the user interface. *NOTE: This configuration is not supported in a VMware ESX environment. …
Using DataKeeper Cluster Edition to Enable Multi-Site Hyper-V Clusters
NO TOC » SIOS Protection Suite for Windows » Clustering » Using DataKeeper Cluster Edition to Enable Multi-Site Hyper-V Clusters
Prerequisite Familiarity with Microsoft Windows Server, Microsoft Windows Failover Cluster Server Management and Hyper-V Virtual Management procedures and commands is highly recommended. Note: DataKeeper ClusterCluster Edition does not support Cluster Shared Volumes;…
Switchover and Failover with Multiple Targets
SIOS DataKeeper for Windows Technical Documentation » User Guide » Configuring Mirrors » Switchover and Failover with Multiple Targets
In a multiple target configuration, it is important to understand how DataKeeper mirrors will work in the following scenarios: Manual switchover to a target server Source server failure followed by a manual switchover to a target server Example: In the…
Using Disk Management
SIOS DataKeeper for Windows Technical Documentation » Administration » Using Disk Management
When using the Windows Disk Management utility to access SIOS DataKeeper volumes, please note the following: Using Disk Management to delete partitions that are being mirrored is not supported. Deleting a partition that is part of a SIOS DataKeeper mirror will yield…
Uninstalling SIOS DataKeeper Cluster Edition
NO TOC » DataKeeper Cluster Edition Installation Guide » Uninstalling SIOS DataKeeper Cluster Edition
Before Removing DataKeeper If planning to uninstall DataKeeper and reinstall a previous version, all jobs/mirrors must be deleted on each node prior to uninstalling. These will need to be recreated once software is reinstalled. Uninstall DataKeeper Cluster…
Upgrading SIOS DataKeeper Cluster Edition
NO TOC » DataKeeper Cluster Edition Installation Guide » Upgrading SIOS DataKeeper Cluster Edition
Upgrading DataKeeper Cluster Edition from previous versions of DataKeeper Cluster Edition is very straightforward. Simply run the installation process outlined below on all systems. The upgrade process stops the DataKeeper Service, copies the new files to the…
DataKeeper Cluster Edition Technical Documentation
NO TOC » DataKeeper Cluster Edition Technical Documentation
SIOS DataKeeper Cluster Edition Introduction
NO TOC » DataKeeper Cluster Edition Technical Documentation » SIOS DataKeeper Cluster Edition Introduction
SIOS DataKeeper Overview DataKeeper with High Availability – Cluster Edition Overview SIOS DataKeeper is a highly optimized host-based replication solution which ensures your data is replicated as quickly and as efficiently as possible from your source server…
DataKeeper Cluster Edition Release Notes
NO TOC » DataKeeper Cluster Edition Release Notes
SIOS DataKeeper Cluster Edition Release Notes Version 8.6.2 (Version 8 Update 6 Maintenance 2) Important!! Read This Document Before Attempting To Install Or Use This Product! This document contains last minute information that must be considered before, during…
DataKeeper Cluster Edition Installation Guide
NO TOC » DataKeeper Cluster Edition Installation Guide
The DataKeeper Cluster Edition Installation Guide contains information on how to install and license your Cluster Edition software. Once you have completed the steps in this guide, you will be ready to configure your Cluster resources. The DataKeeper Cluster Edition…
Mirror Creation and Cluster Configuration
SIOS DataKeeper for Windows Technical Documentation » User Guide » Using Microsoft iSCSI Target With DataKeeper on Windows 2012 » Mirror Creation and Cluster Configuration
Create your DataKeeper volumes and your cluster. See Creating a DataKeeper Volume Resource in WSFC for reference. *IMPORTANT: The iSCSI Target Role only supports DataKeeper Volumes that are mirrors of Simple Volumes placed on Basic Disks. If any of your mirrors are…
Setup of iSCSI Initiator on Windows 2012
SIOS DataKeeper for Windows Technical Documentation » User Guide » Using Microsoft iSCSI Target With DataKeeper on Windows 2012 » Setup of iSCSI Initiator on Windows 2012
Once the virtual disks/targets are created, each of the cluster servers must initiate a connection to them via Microsoft’s iSCSI Initiator. From “Administrator Tools” in “Server Manager”, start “iSCSI Initiator”. Select the “Targets” tab and…
Using Volume Shadow Copy
SIOS DataKeeper for Windows Technical Documentation » FAQs » Using Volume Shadow Copy
Question Can Volume Shadow Copy (VSS) be Used with DataKeeper Volumes? Answer VSS Shadow Copy can be enabled for DataKeeper volumes. However, the following guidelines apply: VSS snapshot images must not be stored on a DataKeeper volume. Storing VSS snapshots on…
Resize or Grow Mirrored Volumes
SIOS DataKeeper for Windows Technical Documentation » FAQs » Resize or Grow Mirrored Volumes
Question Can you resize or grow mirrored volumes? Answer Yes, beginning with Version 7.4, users can extend and shrink their DataKeeper volumes dynamically while retaining mirror settings. See DataKeeper Volume Resize for more information.
Using DKPwrShell with SIOS DataKeeper
SIOS DataKeeper for Windows Technical Documentation » Administration » Using DKPwrShell with SIOS DataKeeper
SIOS DataKeeper includes a powershell module (DKPwrShell) that allows a user to manipulate a DataKeeper mirror using Microsoft Powershell. Commands are passed to a SIOS DataKeeper service and will fail if the service is not running. With Microsoft Powershell v3 or…
Using EMCMD with SIOS DataKeeper
SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper
The EMCMD utility that ships with SIOS DataKeeper provides users with a command line method to manipulate the mirror. Because these scripts run in situations where the “normal” validation rules may not apply, EMCMD does not perform the same kinds of sanity…
Using SIOS DataKeeper Standard Edition To Provide Disaster Recovery For Hyper-V Virtual Machines
SIOS DataKeeper for Windows Technical Documentation » User Guide » Using SIOS DataKeeper Standard Edition To Provide Disaster Recovery For Hyper-V Virtual Machines
Considerations When preparing a Hyper-V environment that spans subnets, subnetting may need to be taken into consideration for any applications that are running inside the virtual machine. Some applications “hard code” IP addresses into their…
Using the -proxy option with EMCMD
NO TOC » DataKeeper Cluster Edition Technical Documentation » Using the -proxy option with EMCMD
All EMCMD requests can be routed through a “proxy” DataKeeper service. To do this, append the options -proxy - to the end of the EMCMD command line. The should be given using the same format as the option. EMCMD will open a connection to the …
SIOS DataKeeper for Windows
SIOS DataKeeper for Windows
Your information resource for SIOS DataKeeper Standard Edition SIOS Technology Corp. maintains documentation for all supported versions of SIOS DataKeeper Standard Edition. We welcome your suggestions and feedback. To help us continue to improve our documentation,…
Volumes Unavailable for Mirroring
SIOS DataKeeper for Windows Technical Documentation » FAQs » Volumes Unavailable for Mirroring
Question Why are some of my volumes not available for mirroring? Answer The SIOS DataKeeper service filters out the following types of disk partitions: Windows system volume Volume(s) that contain the Windows pagefile Non-NTFS formatted volumes (e.g. FAT,…
Specifying Network Cards for Mirroring
SIOS DataKeeper for Windows Technical Documentation » Introduction » Understanding Replication » Specifying Network Cards for Mirroring
SIOS DataKeeper allows the administrator to specify which IP addresses should be used as mirror end-points. This allows the replicated data to be transmitted across a specific network which permits the user to segment mirrored traffic away from the client network if…
Initial Synchronization of Data Across the LAN or WAN
SIOS DataKeeper for Windows Technical Documentation » Configuration » WAN Considerations » Initial Synchronization of Data Across the LAN or WAN
When replicating large amounts of data over a WAN link, it is desirable to avoid full resynchronizations which can consume large amounts of network bandwidth and time. DataKeeper avoids almost all full resyncs by using its bitmap technology. However, the initial…
Extending a Traditional 2-Node Cluster to a Shared-Replicated Configuration
NO TOC » SIOS Protection Suite for Windows » Clustering » Extending a Traditional 2-Node Cluster to a Shared-Replicated Configuration
Add a Shared Node Using Windows Server 2008R2 or 2012 When using Windows Server 2008R2 or 2012, a 1×1 2-Node replicated cluster using DataKeeper Volumes can be extended to a 2×1 shared and replicated 3-Node cluster by using either of the following…
Configuration of Data Replication From a Cluster Node to External DR Site
SIOS DataKeeper for Windows Technical Documentation » Configuration » Configuration of Data Replication From a Cluster Node to External DR Site
SIOS DataKeeper for Windows Technical Documentation
SIOS DataKeeper for Windows Technical Documentation
SIOS DataKeeper for Windows Quick Start Guide
SIOS DataKeeper for Windows Quick Start Guide
This topic provides step-by-step instructions for installing and configuring DataKeeper Standard Edition. The series of steps includes links into the documentation that describe each step in detail. Prerequisites and Installation Read the SIOS Protection Suite for…
Switchover in an N-Shared x N-Shared Configuration
NO TOC » SIOS Protection Suite for Windows » Clustering » Switchover in an N-Shared x N-Shared Configuration
In a multi-shared storage environment between two sites (as shown in the diagram below), each server in each site has access to the storage being shared between the servers at that site. When a DataKeeper mirror is created, one server in each site will be designated…
Installation of the iSCSI Target
SIOS DataKeeper for Windows Technical Documentation » User Guide » Using Microsoft iSCSI Target With DataKeeper on Windows 2012 » Installation of the iSCSI Target
From the Server Manager menu, select “Add Roles and Features” from the “Manage” drop-down. Select the “Role-based or feature-based installation” option. From the list of servers presented, select the appropriate server. On the…
Creation of iSCSI Virtual Disks
SIOS DataKeeper for Windows Technical Documentation » User Guide » Using Microsoft iSCSI Target With DataKeeper on Windows 2012 » Creation of iSCSI Virtual Disks
Perform the following on the primary server, wherever the iSCSI Target server is online at the moment. From Server Manager, navigate to File and Storage Services and select iSCSI. Click on the link “To create an iSCSI virtual disk, start the New iSCSI Virtual Disk…
Non-mirrored Volume Resource
NO TOC » SIOS Protection Suite for Windows » Clustering » Non-mirrored Volume Resource
A non-mirrored volume resource is a DataKeeper resource where no data is replicated to any node in the cluster. This resource type should only be used where the data is temporary and/or non-critical such as MS SQL Server tempdb space. In this case, when MS SQL restarts…
Troubleshooting
SIOS DataKeeper for Windows Technical Documentation » Troubleshooting
The topics in this section contain important information about known issues and restrictions offering possible workarounds and/or solutions. ________________________________________________________________________________________________________________ Known Issues…
DataKeeper Target Snapshot
SIOS DataKeeper for Windows Technical Documentation » User Guide » DataKeeper Target Snapshot
Overview DataKeeper’s target snapshot feature, integrated with both DataKeeper and DataKeeper Cluster Edition, is the process of creating point in time copies of replicated volumes allowing access to data on a standby cluster node without interrupting data…
Licensing
NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite Installation Guide » Installing SIOS Protection Suite » Licensing
Obtaining and Installing the License DataKeeper Cluster Edition requires a unique license for each server. The license is a run-time license which means that you can install it without the license, but the license must be installed before you can successfully start…
Known Issues and Workarounds
SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds
Included below are known issues open against DataKeeper as well as possible workarounds and/or solutions. __________________________________________________________________________________________________________________ Access to Designated Volume Denied Failed to…
DataKeeper Service Log On ID and Password Selection
SIOS DataKeeper for Windows Technical Documentation » Introduction » DataKeeper Components » DataKeeper Service Log On ID and Password Selection
During a new DataKeeper installation setup, the user will be prompted for a DataKeeper Service Log On ID and Password. The DataKeeper Service uses authenticated connections to perform volume switchovers and make mirror role changes across multiple servers. The Log On…
DataKeeper Service Log On ID and Password Selection
SIOS DataKeeper for Windows Technical Documentation » Configuration » DataKeeper Service Log On ID and Password Selection
During a new DataKeeper installation setup, the user will be prompted for a DataKeeper Service Log On ID and Password. The DataKeeper Service uses authenticated connections to perform volume switchovers and make mirror role changes across multiple servers. The Log On…
Firewall Configurations
SIOS DataKeeper for Windows Technical Documentation » Configuration » Firewall Configurations
SIOS DataKeeper cannot function properly if the firewall settings for the source and target machines are not configured correctly. This means you will need to configure a rule for inbound and outbound connections on each server running SIOS DataKeeper as well as any…
N-Shared-Disk Replicated to One
SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » N-Shared-Disk Replicated to One
This configuration allows you to replicate the shared volume(s) of the primary site to a remote system across the network. This configuration is ideal for providing local failover within the Primary Site and disaster recovery protection should the entire Primary…
DKCE Support Matrix
NO TOC » DKCE Support Matrix
Server Components Supported Operating System v8.0.0 v8.0.1 v8.1.0 v8.2.0 v8.2.1 v8.3.0 v8.4.0 v8.5.0 v8.5.1 v8.6.0 v8.6.1 Note: The operating system versions listed…
High-Speed Storage Best Practices
SIOS DataKeeper for Windows Technical Documentation » Configuration » High-Speed Storage Best Practices
Configure Bitmaps If the DataKeeper default bitmap location (%ExtMirrBase%\Bitmaps) is not located on high-speed storage, you should move the bitmaps to a high-speed storage device in order to eliminate I/O bottlenecks with bitmap access. To do this, allocate a small…
One-to-Many (Multiple Targets)
SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » One-to-Many (Multiple Targets)
This configuration involves one primary (source) system replicating one (or more) volume(s) to two different target systems across the network. This is referred to as a multiple target configuration. Note that there are two mirrors that are completely independent…
Creating a Mirror
SIOS DataKeeper for Windows Technical Documentation » User Guide » Configuring Mirrors » Creating a Mirror
Before creating a mirror, ensure the following: You have created a job to hold the mirror. The volume on both the source and target systems must be of the NTFS file system type. The target volume must be greater than or equal to the size of the source…
Split-Brain FAQs
SIOS DataKeeper for Windows Technical Documentation » FAQs » Split-Brain FAQs
Scenario I am using DataKeeper in a non-cluster environment. I am mirroring from Server1 at one site to Server2 at a second site. Communication is broken due to site-to-site VPN, and I need to fail over from Server1 to Server2. I cannot access Server1 from anywhere.…
N-Shared-Disk Replicated to N-Shared-Disk
SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » N-Shared-Disk Replicated to N-Shared-Disk
This configuration replicates data between sites where each site utilizes shared storage. Note that the number of systems in the Primary Site does not have to equal the number of systems in the Remote Site. Also note that only the Source Server has access to the…
User Interface
NO TOC » DataKeeper Cluster Edition Technical Documentation » SIOS DataKeeper Cluster Edition Introduction » User Interface
SIOS DataKeeper User Interface The SIOS DataKeeper User Interface uses a standard MMC snap-in interface. The left pane displays the Console Tree view. This includes the Jobs and Reports. Currently, there are two reports available – Job Overview and Server…
User Interface
SIOS DataKeeper for Windows Technical Documentation » Introduction » User Interface
SIOS DataKeeper User Interface The SIOS DataKeeper User Interface uses a standard MMC snap-in interface. The left pane displays the Console Tree view. This includes the Jobs and Reports. Currently, there are two reports available – Job Overview and…
Unable to Determine Previous Install Path
SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Unable to Determine Previous Install Path
Installation – Fatal Error: Unable to Determine Previous Install Path Error/Message Fatal Error: Unable to determine previous install path. DataKeeper cannot be uninstalled or reinstalled. Description When performing a “Repair” or…
Error Messages Log
SIOS DataKeeper for Windows Technical Documentation » FAQs » Error Messages Log
Question Where does DataKeeper log error messages? Answer DataKeeper events are logged in the Windows Application Event Log and the Windows System Event Log. Here is a breakdown of the messages you can look for. Application Event Log: Source = ExtMirrSvc –…
Performance Monitor Counters
SIOS DataKeeper for Windows Technical Documentation » Introduction » Understanding Replication » Performance Monitor Counters
SIOS DataKeeper provides counters that extend Performance Monitor with statistics about the status of mirroring on volumes. The counters are installed during the full installation of SIOS DataKeeper software. To access the counters, do the following: On a…
Relocation of Intent Log
SIOS DataKeeper for Windows Technical Documentation » Introduction » Understanding Replication » Relocation of Intent Log
To relocate the Intent Log (bitmap file), please perform the following on all servers involved: *LEAVE THE MIRROR IN THE MIRRORING STATE! Do not pause it and then move the bitmap file. If you have more than one DataKeeper mirror, move all mirrors to a single system…
Read and Write Operations
SIOS DataKeeper for Windows Technical Documentation » Introduction » Understanding Replication » Read and Write Operations
After the volume mirror is created and the two drives on the primary and secondary servers are synchronized, the following events occur: The system locks out all user access to the target volume; reads and writes are not allowed to the target volume. The source…
DKSUPPORT
SIOS DataKeeper for Windows Technical Documentation » Administration » DKSUPPORT
DKSUPPORT .cmd, found in the \SUPPORT directory, is used to collect important configuration information and event log files and put them in a zip file. SIOS Support Engineers will commonly request this zip file as part of the support process. To run this utility,…
Network Adapter Settings
SIOS DataKeeper for Windows Technical Documentation » Configuration » Network Adapter Settings
DataKeeper requires that “File and Printer Sharing for Microsoft Networks” be enabled on the network interfaces to make a NAMED PIPE connection and be able to run DataKeeper’s command line tool (EMCMD). To test if you can make a Named Pipe connection,…
SETCONFIGURATION
SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » SETCONFIGURATION
EMCMD SETCONFIGURATION This command sets the net alert settings (also referred to as “volume attributes”) for the volume. The parameters are: This can be either the source or the target system. The drive letter of the…
Mirror Properties
SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Mirrors » Mirror Properties
Select a job in the Job Summary pane and right-click to choose Mirror Properties. This dialog displays the following information about the job, source and target systems: Job Name State (current state of the job; for example, Active) Source…
Components
NO TOC » DataKeeper Cluster Edition Technical Documentation » SIOS DataKeeper Cluster Edition Introduction » Components
DataKeeper Components SIOS DataKeeper for Windows is comprised of the following components: DataKeeper Driver (ExtMirr.sys) – The DataKeeper Driver is a kernel mode driver and is responsible for all mirroring activity between the mirror…
DataKeeper Volume Resize
SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Mirrors » DataKeeper Volume Resize
DataKeeper allows users to extend and shrink their DataKeeper volumes dynamically while retaining mirror settings. Once the resize is complete, a partial resync will be performed. Note: This resize procedure should be performed on only one volume at a time. !WARNING …
One-to-One
SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » One-to-One
This is a simple one source, one target configuration, mirroring Volume X across the network. In addition to providing a second physical copy of the data, DataKeeper also provides the ability to switch over the mirror which allows the data to become active on the…
New-DataKeeperMirror
SIOS DataKeeper for Windows Technical Documentation » Administration » Using DKPwrShell with SIOS DataKeeper » New-DataKeeperMirror
This cmdlet is used to create a new DataKeeper mirror. Mirrors created with this cmdlet will be visible in the DataKeeper SnapIn (Reports > Server Overview). If a job exists that includes information that matches this mirror (systems, IP Addresses, Volumes, and Sync…
CHANGEMIRRORENDPOINTS
SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Restrictions » CHANGEMIRRORENDPOINTS
Description: This command, which is used to move a DataKeeper protected volume to another network location, only supports changing the endpoints of a mirrored volume that is configured on 3 nodes or fewer. Workaround: For configurations greater than three nodes, the…
Registry Entries
SIOS DataKeeper for Windows Technical Documentation » Administration » Registry Entries
The following registry entries are associated with the SIOS DataKeeper service or driver and can be viewed using Regedt32. The first section contains entries that may be modified; the second section contains entries that are for viewing only and should not be…
Many-to-One
SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » Many-to-One
This configuration involves multiple source servers replicating one (or more) volumes to the same target system. In this configuration, each volume being replicated to the target server must have a unique drive letter. Note: This is actually two One-to-One…
GETCONFIGURATION
SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » GETCONFIGURATION
EMCMD GETCONFIGURATION This command retrieves and displays the net alert settings (also referred to as “volume attributes”) for the volume. The parameters are: This can be either the source or the target systems. The…
Setting Up SIOS DataKeeper
NO TOC » SIOS Protection Suite for Windows » DataKeeper » Setting Up SIOS DataKeeper
Follow these steps to start using SIOS DataKeeper: Connect to the servers you wish to configure for replication. You can select Connect to Server from the Action pull down menu, right-click on the job folder in the left panel tree display and select Connect to…
Unextending a Hierarchy
NO TOC » SIOS Protection Suite for Windows » Administration » Working With Resource Hierarchies » Unextending a Hierarchy
The Unextend Resource Hierarchy option removes a complete hierarchy, including all of its resources, from a single server. This is different than the Delete Resource Hierarchy selection which removes a hierarchy from all servers. When using Unextend Resource…
DataKeeper Components
SIOS DataKeeper for Windows Technical Documentation » Introduction » DataKeeper Components
SIOS DataKeeper for Windows is comprised of the following components: DataKeeper Driver (ExtMirr.sys) – The DataKeeper Driver is a kernel mode driver and is responsible for all mirroring activity between the mirror endpoints. DataKeeper Service…
Setting Up SIOS DataKeeper
SIOS DataKeeper for Windows Technical Documentation » User Guide » Setup » Setting Up SIOS DataKeeper
Setting Up SIOS DataKeeper Follow these steps to start using SIOS DataKeeper: Connect to the servers you wish to configure for replication. You can select Connect to Server from the Action pull down menu, right-click on the job folder in the left panel tree…
Setup
SIOS DataKeeper for Windows Technical Documentation » User Guide » Setup
Setting Up SIOS DataKeeper Follow these steps to start using SIOS DataKeeper: Connect to the servers you wish to configure for replication. You can select Connect to Server from the Action pull down menu, right-click on the job folder in the left panel tree…
User Guide
SIOS DataKeeper for Windows Technical Documentation » User Guide
The topics in this section are designed to be a reference for you as you get started using SIOS DataKeeper, helping you identify the type of configuration you are interested in implementing and providing detailed instructions for effectively using your SIOS DataKeeper…
DataKeeper User Guide
NO TOC » SIOS Protection Suite for Windows » DataKeeper » DataKeeper User Guide
The topics in this section are designed to be a reference for you as you get started using SIOS DataKeeper, helping you identify the type of configuration you are interested in implementing and providing detailed instructions for effectively using your SIOS DataKeeper…
DataKeeper Event Log Notification
SIOS DataKeeper for Windows Technical Documentation » Administration » DataKeeper Event Log Notification
The Event Log notification is a mechanism by which one or more users may receive email notices when certain events occur. The Windows Event Log can be set up to provide notifications of certain DataKeeper events that get logged. *Note: This option is only available…
Access to Designated Volume Denied
SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Access to Designated Volume Denied
If access to the designated volume is denied, then check whether you are attempting to create the mirror while other applications are accessing the volume. During Mirror Creation, the volumes must be locked on the target system for exclusive access by the SIOS…
Administration
SIOS DataKeeper for Windows Technical Documentation » Administration
The topics in this section provide detailed instructions for performing DataKeeper administration tasks. _____________________________________________________________________________________________________________________________________________________ DataKeeper…
Jobs
SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Jobs » Jobs
For ease of use and configuration, SIOS DataKeeper does much of its management of mirrors through an entity called a job. A job is a logical grouping of related mirrors and servers. This feature allows you to create a job for complex repetitive tasks and run them…
Getting Started
SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started
Choose Your Configuration DataKeeper can be utilized in a number of different configurations to facilitate a number of different functions including: Provide a second physical copy of your data Extend an existing WSFC cluster to a remote DR site Review the…
GETCOMPLETEVOLUMELIST
SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » GETCOMPLETEVOLUMELIST
EMCMD GETCOMPLETEVOLUMELIST This command displays information on all volumes eligible to be mirrored or already in a mirror. Sample output: Volume 1 information: Volume Root = F: Volume Label = New Volume Volume File System…
Volume Considerations
SIOS DataKeeper for Windows Technical Documentation » Introduction » Understanding Replication » Volume Considerations
SIOS DataKeeper primary and secondary systems have three types of volumes: system, non-mirrored and mirrored. During mirroring operations, system and non-mirrored volumes are not affected and the user has full access to all applications and data on these…
Network Disconnect
SIOS DataKeeper for Windows Technical Documentation » FAQs » Network Disconnect
Scenario #1 In a 2-Node, non-clustering configuration (1×1) replicating a 100TB volume between Source server and Target server over a WAN connection, the network goes down for twenty minutes. Question In this scenario, what would happen to the Mirror State with…
Restrictions
SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Restrictions
Included below are restrictions associated with DataKeeper and DataKeeper Cluster Edition as well as possible workarounds and/or solutions. __________________________________________________________________________________________________________________ Bitlocker…
SETSNAPSHOTLOCATION
SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » SETSNAPSHOTLOCATION
EMCMD SETSNAPSHOTLOCATION “” This command sets the snapshot location (directory path) for the given volume on the given system. The directory must be valid on the system in question, must be a local drive/path, must be an absolute path and cannot be left…
DROPSNAPSHOT
SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » DROPSNAPSHOT
EMCMD DROPSNAPSHOT [ …] This command will notify DataKeeper to lock the volume and clean up the snapshot files that it created. The parameters are: This is the IP address of the system containing the snapshot. This is the…
Resynchronization
SIOS DataKeeper for Windows Technical Documentation » Introduction » Understanding Replication » Resynchronization
SIOS DataKeeper Resynchronization SIOS DataKeeper performs resynchronization through the use of a bitmap file (intent log). It allocates memory that is used to keep track of “dirty” or “clean” blocks. When a full resync begins, SIOS DataKeeper…
Disk-to-Disk
SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » Disk-to-Disk
This is a simple one server, two disks configuration, mirroring Volume X on Server A to Volume Y on Server A. The volumes that are used for Disk-to-Disk replication can’t also be configured to replicate to another system. *Disk to Disk does not support mirrors…
SIOS DataKeeper Intent Log
SIOS DataKeeper for Windows Technical Documentation » Introduction » Understanding Replication » SIOS DataKeeper Intent Log
SIOS DataKeeper uses an intent log (also referred to as a bitmap file) to track changes made to the source, or to target volume during times that the target is unlocked. This log is a persistent record of write requests which have not yet been committed to both…
DataKeeper Notification Icon
SIOS DataKeeper for Windows Technical Documentation » User Guide » DataKeeper Notification Icon
The DataKeeper Notification Icon is an application that will show a summary of your DataKeeper mirrors in the Windows Notification Tray. The icon displayed indicates what conditions have been detected, with the following priority. Error: An error condition, such as…
CHKDSK Considerations
SIOS DataKeeper for Windows Technical Documentation » Administration » CHKDSK Considerations
If you must run CHKDSK on a volume that is being mirrored by SIOS DataKeeper, it is recommended that you first pause the mirror. After running CHKDSK, continue the mirror. A partial resync occurs (updating those writes generated by the CHKDSK) and mirroring will…
Creating a Job
SIOS DataKeeper for Windows Technical Documentation » User Guide » Setup » Creating a Job
If not already connected, connect to the server where you want to create a job. From the right Actions pane, select Create Job. The Job Wizard will prompt you for a Job Name and Description. Enter the appropriate information and select Create Job to…