The Simple Network Management Protocol (SNMP) defines a device-independent framework for managing networks. Devices on the network are described by MIB (Management Information Base) variables that are supplied by the vendor of the device. An SNMP agent runs on each node of the network and interacts with a Network Manager node. The Network Manager can query the agent to get or set the values of its MIB variables, thereby monitoring or controlling the agent’s node. The agent can also asynchronously generate messages called traps to notify the manager of exceptional events. There are a number of applications available for monitoring and managing networks using the Simple Network Management Protocol (SNMP).
SIOS Protection Suite has an event notification mechanism for registering applications that wish to be notified of specific events or alarms (see the sendevent man page). SIOS Protection Suite can be easily enabled to send SNMP trap notification of key SIOS Protection Suite events to a third party network management console wishing to monitor SIOS Protection Suite activity. SIOS Protection Suite installs an MIB file under %LKROOT%\include\LifeKeeper-MIB.txt which describes SIOS Protection Suite trap definitions.
The remote management console receiving SNMP traps must first be configured through the administration software of that system; SIOS Protection Suite provides no external SNMP configuration. The remote management server is typically located outside of the SIOS Protection Suite cluster (i.e., it is not a SIOS Protection Suite node).
SIOS Protection Suite Events Table
The following table contains the list of SIOS Protection Suite events and associated trap numbers. The entire Object ID (OID) consists of a prefix followed by a specific trap number in the following format:
prefix.0.specific trap number
The prefix is .1.3.6.1.4.1.7359, which expands to iso.org.dod.internet.private.enterprises.7359 in the MIB tree. (7359 is SIOS’s enterprise number, followed by 1 for LifeKeeper.) For example, the LifeKeeper Startup Complete event generates the OID: .1.3.6.1.4.1.7359.1.0.100
LifeKeeper Startup Complete Sent from a node when LifeKeeper is started on that node |
100 | .1.3.6.1.4.1.7359.1.0.100 | |||||||
LifeKeeper Shutdown Initiated Sent from a node beginning LifeKeeper shutdown |
101 | .1.3.6.1.4.1.7359.1.0.101 | |||||||
LifeKeeper Startup Complete Sent from a node completing LifeKeeper shutdown |
102 | .1.3.6.1.4.1.7359.1.0.102 | |||||||
LifeKeeper Manual Switchover Initiated on Server Sent from the node from which a manual switchover was requested |
110 | .1.3.6.1.4.1.7359.1.0.110 | |||||||
LifeKeeper Manual Switchover Complete – recovered list Sent from the node where the manual switchover was completed |
111 | .1.3.6.1.4.1.7359.1.0.111 | |||||||
LifeKeeper Manual Switchover Complete – failed list Sent from the node where the manual switchover was completed |
112 | .1.3.6.1.4.1.7359.1.0.112 | |||||||
LifeKeeper Node Failure Detected Sent from each node within the cluster when a node in that cluster fails |
120 | .1.3.6.1.4.1.7359.1.0.120 | |||||||
LifeKeeper Node Recovery Complete – recovered list Sent from each node within the cluster that has recovered resources from the failed node |
121 | .1.3.6.1.4.1.7359.1.0.121 | |||||||
LifeKeeper Node Recovery Complete – failed list Sent from each node within the cluster that has failed to recover resources from the failed node |
122 | .1.3.6.1.4.1.7359.1.0.122 | |||||||
LifeKeeper Resource Recovery Initiated Sent from a node recovering a resource; a 131 or 132 trap always follows to indicate whether the recovery was completed or failed. |
130 | .1.3.6.1.4.1.7359.1.0.130 | |||||||
LifeKeeper Resource Recovery Failed Sent from the node in trap 130 when the resource being recovered fails to come into service |
131* | .1.3.6.1.4.1.7359.1.0.131 | |||||||
LifeKeeper Resource Recovery Complete Sent from the node in trap 130 when the recovery of the resource is completed |
132 | .1.3.6.1.4.1.7359.1.0.132 | |||||||
Mirror State Change Sent from the node, who is the source of the mirror, when the mirror state changes. Displays the volume letter, mirror state and IP address of the target node. Valid Mirror States: |
150 | .1.3.6.1.4.1.7359.1.0.150 | |||||||
LifeKeeper replicated volume Split-Brain detected Sent from the node where LifeKeeper has detected mirror is Source on both sides. Displays volume letter and IP address of the target node. |
160 | .1.3.6.1.4.1.7359.1.0.160 | |||||||
The following variables are used to “carry” additional information in the trap PDU: | |||||||||
Trap message | all | .1.3.6.1.4.1.7359.1.1 | |||||||
Resource Tag | 130 | 1.3.6.1.4.1.7359.1.2 | |||||||
Resource Tag | 131 | .1.3.6.1.4.1.7359.1.2 | |||||||
Resource Tag | 132 | .1.3.6.1.4.1.7359.1.2 | |||||||
List of recovered resources | 111 | .1.3.6.1.4.1.7359.1.3 | |||||||
List of recovered resources | 121 | .1.3.6.1.4.1.7359.1.3 | |||||||
List of failed resources | 112 | .1.3.6.1.4.1.7359.1.4 | |||||||
List of failed resources | 122 | .1.3.6.1.4.1.7359.1.4 |
* This trap may appear multiple times if recovery fails on multiple backup servers.
このトピックへフィードバック