Protecting an NFS Resource

This section describes the steps required to protect a cluster of NFS servers.

Before Beginning

This section assumes that the following 2 resources are configured on the cluster.

• IP Resource
• Data Replication at /datakeeper

The LifeKeeper GUI should look like the following prior to installing the NFS software.

Install NFS Server Software

*Install nfs-utils on both nodes.

Install nfs-utils on both node-a and node-b.

Configure the NFS Server

*The following steps should be performed on node-a only.

Edit /etc/exports to define the NFS export. We are using the shared storage (/datakeeper) that is protected by DataKeeper. Create /datakeeper/nfs/data and use it as the location of the export.

Once the /etc/exports file is edited it should look like the following:

Start the NFS process on node-a.

Confirm Access to the NFS Server from a Client

*The following steps should be done on a client machine.

On the client machine (e.g., node-c), complete the following steps to install the NFS software. Mount the NFS export from node-a to a local folder (e.g., mount to /local/nfsclient).

Now the content on the NFS server should be visible. Disconnect (unmount) from the NFS server to configure the NFS cluster.

Protecting an NFS Resource using LifeKeeper

*Complete the follow these steps on node-a.

1. Select on the LifeKeeper user interface.

2. The Create Resource Wizard at node-a screen will appear. Select the NFS Recovery Kit as the Recovery Kit.

3. Select the following parameters.

Item	Location
Switchback Type	intelligent
Server	node-a
Export Point	/datakeeper/nfs/data
IP Tag	ip-10.10.10.10
NFS Tag	nfs-/datakeeper/nfs/data

The wizard checks these values. Once “nfs-/datakeeper/nfs/data” is successfully created on node-a, continue to the next steps.

4. Select the following values on Pre-Extend Wizard @ node-a.

Field	Value
Target Server	node-b
Switchback Type	intelligent
Template Priority	1
Target Priority	10

The wizard checks these values. Once the Pre-Extend Check is completed, move on to the next steps.

5. Select the following values on the Extend gen/nfs Resource Hierarchy @ node-a wizard.

Field	Value
NFS Tag	nfs-/datakeeper/nfs/data

The NFS resource hierarchy is now defined in LifeKeeper. The wizard automatically defines a dependency between the NFS resource and required resources (IP resource and /datakeeper resource).