Create an IP resource with the LifeKeeper GUI.
- Select Create Resource Hierarchy from the LifeKeeper GUI administration screen.
- Follow the Create Resource wizard. Use the following values.
Item | Value to be entered or selected | Notes |
---|---|---|
Select Recovery Kit | IP | |
Switchback Type | Intelligent | |
IP Resource | 10.3.1.200 | *Note 1 |
Netmask | 255.255.255.0 | |
Network Interface | eth0 | |
IP Resource Tag | ip-10.3.1.200 |
- Note 1: Use the same value as the configured Azure load balancer frontend IP.
When extending, use the following values.
Item | Value to be entered or selected | Notes |
---|---|---|
Target Server | lk4lnode02 | |
Switchback Type | Intelligent | |
Template Priority | 1 | |
Target Priority | 10 | |
IP Resource | 10.3.1.200 | *Note 1 |
Netmask | 255.255.255.0 | |
Network Interface | eth0 | |
IP Resource Tag | ip-10.3.1.200 |
- Note 1: Use the same value as the configured Azure load balancer frontend IP.
- IP resource is created.
Creating an IP Resource Hierarchy
In this environment, since the monitoring by Broadcast Ping is disabled, we will perform live monitoring using Unicast Ping.
Example
Open the IP resource property screen and click Modify Ping List.
Enter the IP address to set in the Ping List and click Add address.
Click Save List to save the settings.
Verify that you can get a ping response from the Ping List address you configured.
このトピックへフィードバック