1. Follow the same procedure to create a virtual machine that was used for the cluster nodes (standby node).

Use the following values for basic settings:

Basics
Item Value to be entered or selected Notes
INSTANCE DETAILS
Virtual machine name lk4lnode02

All other settings should be the same as the active node.

Use the following values for disk settings:

Disks
Item Value to be entered or selected Notes
DATA DISKS
LUN 0
NAME (create and attach a new disk)

lklnode02_DataDisk_0
DATA DISKS
LUN 1
NAME (create and attach a new disk)

lklnode02_DataDisk_1
Any value

All other settings should be the same as the active node.

Use the following values for network settings:

Networking
Item Value to be entered or selected Notes
Public IP (create new)

Name:lk4lnode02pubip

SKU:Basic

Assignment:Static
*Note 1

Note 1: In this procedure the Public IP has been set to access via the Internet.

All other settings should be the same as the active node.

  1. Make administrative settings, advanced settings, and tagging if necessary, and then click Review + Create.
  1. Review the details and click Create.
  1. Since the network configuration will be changed after this, stop the virtual machine.
  1. Change the first network interface to a static IP address. Click Azure Portal > Virtual machines > (Virtual machine name) > Networking > (First interface name).
  1. Click IP configurations > ipconfig1. At this point the IP address is set as Dynamic.
  1. Set the IP address to Static.

Use the following values:

Item Value to be entered or selected Notes
Assignment Static
IP address Static 10.3.1.12
  1. Click Save to save the settings.
  1. Next, add a second network interface. Click Azure Portal > Virtual machines > (Virtual machine name) > Networking > Attach network interface.
  1. Click Create network interface.
  1. Click Create after entering the required values.

Use the following values:

Item Value to be entered or selected Notes
Name lk4lnode02-nic2
Subnet 10.3.2.0/24 *Note 1
Private IP address assignment Static
Private IP address 10.3.2.12
Network security group None
  • Note 1: Set the second subnet created in the previous step for the virtual machine.


  1. Click OK.
  1. Make sure that the two interfaces are attached.
  1. Start the virtual machine.

Feedback

Thanks for your feedback.

Post your comment on this topic.

Post Comment