Configure a route table as shown below.

  • Add the route information to the on-premises environment network to the route table of the VPC or subnet where the cluster nodes are located.
Destination Address
Target
On-premises network address Created Transit Gateway
  • Add the route information to the Virtual IP address in the route table of the Transit Gateway.
Destination Address
Target
Virtual IP address VPC where the cluster nodes are located
  • Configure the routing information of clients and routers in the on-premises environment so that the destination of packets to the network address and virtual IP address of the VPC where the cluster nodes are located are the Direct Connect.

Once configured, make sure that the client can access the private address and virtual IP address of the cluster server.

Feedback

Thanks for your feedback.

Post your comment on this topic.

Post Comment