Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen.
Code | Severity | Message | Cause/Action |
---|---|---|---|
128005 | ERROR | END failed %s of "%s" on server "%s" due to a "%s" signal | Cause: The quickCheck of {resource} on {server} failed due to an operating system signal {signal}. Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128008 | ERROR | Usage: quickCheck -t <tag name> -i <id> | Cause: Incorrect arguments have been supplied to the dmmp device quickCheck command preventing it from running. Action: Make sure all software components are properly installed and at the correct version. Rerun the command and supply the correct argument list: -t <Resource Tag> and -i <Resource ID> that identifies the dmmp device resource to be quickChecked. |
128010 | ERROR | quickCheck for "%s" failed checks of underlying paths, initiate recovery. retry count=%s. | Cause: The dmmp kit failed to quickCheck a device after {count} times of retries. A recovery of the protected dmmp resource will be executed. Action: Check adjacent log messages for further details and related messages. |
128021 | ERROR | unable to find device for uuid "%s". | Cause: The device could not be found by unique id during a restore operation. Action: Verify that the resource is configured properly. Rerun the command and supply the correct device id that identifies the dmmp device resource to be restored. |
128025 | ERROR | Device "%s" failed to unlock. | Cause: A non working {device} was detected and could not be unlocked during the restore operation. Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128026 | ERROR | Device "%s" failed to lock. | Cause: The {device} could not be locked during the resotre. Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128031 | ERROR | unable to find device for uuid "%s". | Cause: The device could not be found by unique id during the remove operation. Action: Verify that the resource is configured properly. Rerun the command and supply the correct device id that identifies the dmmp device resource to be removed. |
128034 | ERROR | Device "%s" failed to unlock. | Cause: The {device} could not be unlocked during the remove. Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128036 | ERROR | unable to load existing information for device with uuid "%s". | Cause: The device information could not be loaded by unique id. Action: Make sure the resource is configured properly. Rerun the command and supply the correct device id that identifies the dmmp device resource. |
128037 | ERROR | unable to load existing information for device "%s". | Cause: The device information could not be loaded by name. Action: Make sure the resource is configured properly. Rerun the command and supply the correct device name that identifies the dmmp device resource. |
128038 | ERROR | unable to load existing information for device, no dev or uuid defined. | Cause: The device information could not be loaded since neither a unique device id nor name of the device were defined. Action: Make sure the resource is configured properly. Rerun the command and supply the correct device id or name that identifies the dmmp device resource. |
128041 | ERROR | unable to load existing information for device with uuid "%s". | Cause: The device information could not be loaded by unique id. Action: Make sure the resource is configured properly. Rerun the command and supply the correct device id that identifies the dmmp device resource. |
128057 | ERROR | All paths are failed on "%s". | Cause: LifeKeeper detected all paths listed to the protected dmmp device are in the failed state. Action: Check adjacent log messages for further details and related messages. |
128058 | ERROR | could not determine registrations for "%s"! All paths failed. | Cause: LifeKeeper could not determine registrations for protected dmmp {device}. All paths to the dmmp {device} are in the failed state. Action: Check adjacent log messages for further details and related messages. |
128059 | WARN | path "%s" no longer configured for "%s", remove from path list. | Cause: LifeKeeper detected listed {path} to protected {device} is not valid anymore and will remove it from the path list. Action: Check adjacent log messages for further details and related messages. |
128060 | WARN | registration failed on path "%s" for "%s". | Cause: LifeKeeper failed the registration on {path} for protected dmmp {device}. Action: Check adjacent log messages for further details and related messages. |
128062 | ERROR | all paths failed for "%s". | Cause: LifeKeeper failed to verify a valid path to protected dmmp {device}. Action: Check adjacent log messages for further details and related messages. |
128072 | ERROR | The daemon "%s" does not appear to be running and could not be restarted. Path failures may not be correctly handled without this daemon. | Cause: LifeKeeper failed to verify dmmp daemon is running and could not restart it. Action: Check adjacent log messages for further details and related messages. |
128078 | ERROR | "%s" resource type is not installed on "%s". | Cause: The Device Mapper Multipath Recovery Kit for dmmp device support is not installed on the system. Action: Install the steeleye-lkDMMP Device Mapper Multipath Recovery Kit rpm on the system. |
128083 | ERROR | This script must be executed on "%s". | Cause: An incorrect system name has been supplied as an argument to the devicehier script used to create the dmmp device resource. Action: Make sure the cluster nodes and comm-paths are properly configured. Supply the correct system name to the devicehier script. The name must match the name of the system on which the command is run. |
128084 | ERROR | The device %s is not active. | Cause: LifeKeeper failed to find the specified {device} as a valid device on the system during resource creation. Action: Check adjacent log messages for further details and related messages. Rerun the command and supply the correct argument list: -t <Resource Tag> and -i <Resource ID> that identifies the dmmp device resource to be created. |
128086 | ERROR | Failed to create "%s" hierarchy. | Cause: LifeKeeper failed to create resource hierarchy for {device}. Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128088 | ERROR | Error creating resource "%s" on server "%s" | Cause: LifeKeeper failed to create the resource with {tagname} on {server}. Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128090 | ERROR | Failed to create dependency "%s"-"%s" on system "%s". | Cause: LifeKeeper failed to create dependency {resource tag name} – {resource tag name} on {system} during creation. Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128091 | ERROR | Error creating resource "%s" on server "%s" | Cause: LifeKeeper failed to create {resource} on {system}. Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128101 | ERROR | "%s" constructor requires a valid argument. | Cause: LifeKeeper failed to create an object for the dmmp resouce during construction. Action: Rerun the command and supply the correct argument list: -t <Resource Tag> and -i <Resource ID> that identifies the dmmp device resource. |
128102 | ERROR | Invalid tag "%s". | Cause: A resource instance could not be found for the given tag name. Action: Make sure the resource is configured properly. Rerun the command and supply the correct argument list: -t <Resource Tag> and -i <Resource ID> that identifies the dmmp device resource. |
128111 | ERROR | Failed to get registrations for "%s": %s. Verify the storage supports persistent reservations. | Cause: LifeKeeper failed to get the registrations of {device} with the message, "bad field in Persistent reservation in cdb". Action: Verify if the storage supports persistent reservations. Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128112 | ERROR | Failed to get registrations for "%s": %s. Verify the storage supports persistent reservations. | Cause: LifeKeeper failed to get the registrations of {device} with the message, "illegal request". Action: Verify if the storage supports persistent reservations. Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128136 | ERROR | A previous quickCheck with PID "%s" running for device "%s" has been terminated. | Cause: LifeKeeper detected that a previous quickCheck operation is still running during the dmmp resource restore operation. It has been terminated by LifeKeeper. Action: Check adjacent log messages for further details and related messages. |
128137 | ERROR | SCSI reservation conflict on %s during LifeKeeper resource initialization. Manual intervention required. | Cause: LifeKeeper detected a SCSI reservation conflict on {device} during dmmp resource restore. Action: Check adjacent log messages for further details and related messages. Manual intervention and fix of the reservation conflict on {device} is required. |
128138 | ERROR | unable to clear registrations on %s. | Cause: LifeKeeper failed to clear all the registrations on {device}. Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128140 | WARN | registration failed on path %s for %s. | Cause: LifeKeeper failed to make the registratioin on {path} for {device}. Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128143 | ERROR | reserve failed (%d) on %s. | Cause: LifeKeeper failed to make reservation for {resource} on {device}. Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128145 | ERROR | The server ID "%s" returned by "%s" is not valid. | Cause: LifeKeeper failed to generate a valid host {ID}. Action: The ID used to register a device is made up of 1 to 12 Hex digits that uniquely identifies the server in the cluster. Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128146 | ERROR | device failure on %s. SYSTEM HALTED. | Cause: LifeKeeper detected failure on {device} and will reboot the server. Action: Check adjacent log messages for further details and related messages. |
128148 | ERROR | device failure on %s. SYSTEM HALTED DISABLED. | Cause: LifeKeeper detected a failure on {device}. The reboot was skipped due to LifeKeeper configuration. Action: Check adjacent log messages for further details and related messages. Turn on the configuration "SCSIHALT" to make the reboot available for any detected device failure. |
128149 | ERROR | device failure or SCSI Error on %s. SENDEVENT DISABLED. | Cause: LifeKeeper detected a failure on {device}. The event generation was skipped due to LifeKeeper configuration. Action: Check adjacent log messages for further details and related messages. Turn on the configuration "SCSIEVENT" to make the sendevent available for any detected device failure. |
128150 | ERROR | %s does not have EXCLUSIVE access to %s, halt system. | Cause: LifeKeeper detected a reservation conflict for {device} on {server} and will reboot the server. Action: Check adjacent log messages for further details and related messages. |
128151 | ERROR | %s does not have EXCLUSIVE access to %s, halt system DISABLED. | Cause: LifeKeeper detected a reservation conflict for {device} on {server}. The reboot was skipped due to LifeKeeper configuration. Action: Check adjacent log messages for further details and related messages. Turn on the configuration "RESERVATIONCONFLICT" to make the reboot available for any detected reservation conflicts. |
128154 | WARN | unable to flush buffers on %s. | Cause: LifeKeeper failed to flush the buffers for {device} during dmmp resource remove. Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128157 | WARN | %s utility not found, limited healthcheck for %s. | Cause: LifeKeeper failed to find "dd" utility for the health check of {device}. Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128160 | ERROR | %s failed to read %s. | Cause: LifeKeeper failed a disk I/O test for {device} when using {utility}. Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128163 | ERROR | Registration ID "%s" for "%s" is not valid. | Cause: LifeKeeper failed to generate a valid registration {ID} for {device}. Action: The ID used to register a device is made up of 4 Hex digits derived from the path to the device. Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128170 | ERROR | Usage: canextend <Template system name> <Template tag name> | |
128500 | ERROR | Usage error | Cause: Incorrect arguments have been supplied to the dmmp device restore command preventing it from running. Action: Rerun the command and supply the correct argument list: -t <Resource Tag> and -i <Resource ID> that identifies the dmmp device resource to be restored. |
128504 | ERROR | "%s" resource type is not installed on "%s". | Cause: The Device Mapper Multipath Recovery Kit for dmmp device support is not installed on the system. Action: Install the steeleye-lkDMMP Device Mapper Multipath Recovery Kit rpm on the system. |
128506 | ERROR | Usage error | Cause: Incorrect arguments have been supplied to the dmmp device devShared command preventing it from running. Action: Rerun the command and supply the correct argument list: <Template Resource System Name> and <Template Resource Tag> that identifies the dmmp device resource to be created. |
128507 | FATAL | This script must be executed on "%s". | Cause: An incorrect system name has been supplied as an argument to the devicehier script used to create the dmmp device resource. Action: Supply the correct system name to the devicehier script. The name must match the name of the system on which the command is run. |
128511 | ERROR | Failed to get the ID for the device "%s". Hierarchy create failed. | Cause: The devicehier script used to create the dmmp device resource was unable to determine the SCSI ID for the supplied device. Action: Check that the supplied device path exists and that is for a supported SCSI storage array. |
128512 | ERROR | Failed to get the disk ID for the device "%s". Hierarchy create failed. | Cause: The devicehier script used to create the dmmp disk resource was unable to determine the SCSI ID for the supplied disk. Action: Check that the supplied device path exists and that is for a supported SCSI storage array. |
128513 | ERROR | Failed to create the underlying resource for device "%s". Hierarchy create failed. | Cause: The creation of the underlying dmmp disk resource failed. Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128515 | ERROR | Error creating resource "%s" on server "%s" | Cause: The creation of the dmmp device resource failed. Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128517 | ERROR | Failed to create dependency "%s"-"%s" on system "%s". | Cause: The parent child dependency creation between the dmmp device and dmmp disk resources failed. Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128519 | ERROR | Error creating resource "%s" on server "%s" | Cause: The attempt to bring the newly created dmmp device resource in service has failed. Action: Check adjacent log messages for further details and related messages. You must correct any reported errors before retrying the operation. |
128521 | ERROR | Either TEMPLATESYS or TEMPLATETAG argument missing | Cause: Incorrect arguments have been supplied to the extend command for the dmmp device resource. Action: Rerun the dmmp device resource extend and supply the correct template system and tag names. |
128540 | ERROR | Usage error | Cause: Incorrect arguments have been supplied to the dmmp device getId command used to retrieve the SCSI ID. Action: Rerun the command and supply the correct argument list: -i <device path> or -b <device ID>. |
128541 | ERROR | Usage error | Cause: Incorrect arguments have been supplied to the command used to delete the dmmp device resource. Action: Rerun the command and supply the correct argument list: -t <dmmp device resource tag>. |
128543 | ERROR | device node \"$dev\" does not exist. | Cause: The device node required for restoring the dmmp device resource does not exist. The allocated wait time in restore for udev device creation has been exceed. Action: Rerun the dmmp device resource restore once udev has created the device. |
128544 | ERROR | Usage error | Cause: Incorrect arguments have been supplied to the remove command used to take the dmmp device resource out of service. Action: Rerun the command and supply the correct argument list: -t <dmmp device resource tag>. |
Post your comment on this topic.