Use Control F to search for a specific error code in each catalog. To search for any error code, select the Search button at the top right of the screen.
For a complete list of all the messages you may encounter while using LifeKeeper for Linux, please refer to the Combined Message Catalog.
| Code | Severity | Message | Cause/Action |
|---|---|---|---|
| 139000 | ERROR | Cannot find the \"oci\" command in directories of the PATH. Please confirm that it is installed and the PATH is set correctly. | Cause: Unable to get PATH for "oci" command. Action: Make sure that the "oci" command is installed and that the installation directory for the "oci" command is added to your PATH. |
| 139001 | ERROR | Cannot get resource info for OCIVIP resource $tag | Internal Error |
| 139012 | ERROR | Cause: Failed to execute the oci command. Action: Configure the oci command to end successfully based on the status code and message. |
|
| 139013 | ERROR | Failed to assign $ip, error:\"$result\" | Cause: Failed to allocate $ip. Action: Resolve the cause of the error based on the $result details. |
| 139022 | ERROR | Cause: Failed to execute the oci command. Action: Configure the oci command to end successfully based on the status code and message. |
|
| 139023 | ERROR | Failed to unassign $ip, error:\"$result\" | Cause: Failed to allocate $ip. Action: Resolve the cause of the error based on the $result details. |
| 139032 | ERROR | Cause: Failed to execute the oci command. Action: Configure the oci command to end successfully based on the status code and message. |
|
| 139033 | ERROR | Failed to \"$ocicmdstr\", unknown error:\"$ip_list\" | Cause: The oci command terminated abnormally due to a cause other than code 139032. Action: Unknown error: Please take action based on the "$ip_list". |
| 139034 | ERROR | There is no secondary IPs on $device. | Cause: No secondary IP address has been assigned to $device. Action: If local recovery is enabled, make sure that local recovery was performed and therefore it recovered from the failure. |
| 139035 | ERROR | $ip is not assigned to $device. | Cause: $ip is not assigned to $device. Action: If local recovery is enabled, make sure that local recovery was performed and therefore it recovered from the failure. |
| 139036 | ERROR | A message equivalent to any of the codes 139070 to 139075. | Cause:Refer to 139070 to 139075 Action: Refer to 139070 to 139075. |
| 139037 | ERROR | A message equivalent to any of the codes 139060 to 139063. | Cause: Refer to 139060 to 139063. Action: Refer to 139060 to 139063. |
| 139042 | ERROR | Cause: Failed to execute the oci command. Action: Configure the oci command to end successfully based on the status code and message. |
|
| 139043 | ERROR | Failed to assign $ip, error:\"$result\" | Cause: Failed to allocate $ip. Action: Resolve the cause of the error based on the $result details. |
| 139060 | ERROR | $cmd is invalid. | Cause: $cmd is invalid. Action: Please contact us. |
| 139061 | ERROR | OCIVIP does not support IPv6. | Cause: OCIVIP resources do not support use with IPv6. Action: Please use IPv4. |
| 139062 | ERROR | $cmd is invalid. | Cause: $cmd is invalid. Action: Please contact us. |
| 139063 | ERROR | IPv$ipversion is unknown version. | Cause: The IP address version is incorrect. Action: Please use IPv4. |
| 139070 | ERROR | Failed to get vnics information from Instance MetaData Service. | Cause: Failed to access the Instance Metadata Service. Action: Please identify the cause from the most recent log. |
| 139071 | ERROR | Failed to decode JSON, error:\"$e\". | Cause: Failed to decode JSON. Action: Make sure that the result obtained from Instance Meta Data Service is in JSON format. |
| 139073 | ERROR | Cannot find the vnicId of $device. | Cause: The vnicId corresponding to $device could not be obtained. Action: Check if vnicId exists in the JSON record of Instance Meta Data Service. |
| 139074 | ERROR | Cannot find the subnetcidr of $device. | Cause: The subnetCidrBlock corresponding to $device could not be obtained. Action: Check if subnetcidr exists in the JSON record of Instance Meta Data Service. |
| 139075 | ERROR | Cannot find the vRouterIp of $device. | Cause: The virtualRouterIp corresponding to $device could not be obtained. Action: Check if virtualRouterIp exists in the JSON record of Instance Meta Data Service. |
| 139080 | ERROR | Cause: Failed to execute the oci command. Action: Configure the oci command to end successfully based on the status code and message. |
|
| 139081 | ERROR | Failed to get subnet id, error:\"$subnetid\" | Cause: Failed to obtain the subnet id. Action: Check if the information can be obtained correctly with the following command. The $vnicid corresponds to the VNIC-ID (OCID) of each VNIC assigned to the node. |
| 139100 | ERROR | IP address is not specified. | Cause: IP address is not specified. Action: Make sure the IP address is specified. |
| 139101 | ERROR | Device is not specified. | Cause: Device is not specified. Action: Make sure the device is specified. |
| 139105 | ERROR | Cannot bring OCIVIP resource $Tag in service on server $SysName. | Cause: Failed to restore the OCIVIP resource $Tag on $SysName. Action: Please refer to the log related to the restore process. |
| 139111 | ERROR | $ipid already exists, and device and netmask are inconsistent with those of $ocivipTag. | Cause: An IP resource corresponding to the IP address of the OCIVIP resource exists, but the device information and netmask information are inconsistent. Action: Change the configuration of the existing IP resource to have the same settings as the OCIVIP resource and create a dependency with the OCIVIP resource. |
| 139112 | ERROR | Cannot bring IP resource $iptag in service on server $SysName. | Cause: Failed to restore the IP resource $iptag corresponding to the OCIVIP resource on $SysName. Action: Review the configuration of the IP resource and make sure that restoring of the IP resource is successful. Then create a dependency with the OCIVIP resource. |
| 139200 | ERROR | A resource with the specified tag name \"%s\" already exists on the target machine \"%s\".", | Cause: A resource with the specified tag name already exists on the extended node. Action: Please use a different tag name or delete the resource with the target tag name of the extended node. |
| 139201 | ERROR | Template resource \"%s\" does not exist on the server \"%s\". | Cause: The resource specified as the extension source does not exist on the node. Action: Please specify the tag name correctly. |
| 139250 | ERROR | Failed to valuenetOnOCI, error: \"$msg\". | Cause: valuentOnOCI failed. Action: The full error message is in $stderr_log. Please take action based on it. |
Post your comment on this topic.