Use Control F to search for a specific error code.
| Code | Severity | Message | Cause | Action |
|---|---|---|---|---|
| 18100 | DEBUG | qwk_global_lock: file=%s, line=%d | ||
| 18101 | DEBUG | qwk_global_unlock: file=%s, line=%d | ||
| 18102 | ERROR | Periodic storage quorum check has not been done for %lld ms, which exceeds 2*QWK_STORAGE_HBEATTIME (%lld) ms. | ||
| 18104 | ERROR | usage: %s | ||
| 18105 | INFO | starting %s | ||
| 18106 | ERROR | qwk_config() failed. | ||
| 18107 | ERROR | thread_initialize() failed. | ||
| 18108 | ERROR | state_monitor_initialize() failed. | ||
| 18109 | ERROR | state_monitor() failed. | ||
| 18110 | ERROR | start_server() failed. | ||
| 18111 | INFO | shutdown %s | ||
| 18112 | ERROR | ‘fopen’ for %s failed: %d | ||
| 18113 | ERROR | ‘qwk_object_path=’ line cannot be found for %s. | ||
| 18114 | ERROR | ‘%s’ is unknown config. | ||
| 18115 | ERROR | configuration of hbeattime ‘%d’ is incorrect. | ||
| 18116 | ERROR | configuration of numhbeats ‘%d’ is incorrect. | ||
| 18117 | ERROR | configuration of timeout_multiplier ‘%d’ is incorrect. | ||
| 18118 | ERROR | configuration of lcmhbeattime ‘%d’ is incorrect. | ||
| 18119 | ERROR | configuration of lcmnumhbeats ‘%d’ is incorrect. | ||
| 18120 | ERROR | configuration of qwk_object_type is incorrect. | ||
| 18121 | ERROR | configuration of my_node is incorrect. | ||
| 18122 | ERROR | configuration of number_of_node ‘%d’ is incorrect. | ||
| 18123 | ERROR | configuration of number_of_object ‘%d’ is incorrect. | ||
| 18124 | ERROR | configuration of object node is incorrect. | ||
| 18125 | ERROR | configuration of object path is incorrect. | ||
| 18126 | ERROR | my_node is not include in qwk_objects. | ||
| 18127 | ERROR | ‘CreateFile’ for %s failed: %d | ||
| 18128 | ERROR | ‘ReadFile’ for %s failed: %d | ||
| 18129 | ERROR | ‘popen’ for %s failed: %d | ||
| 18130 | ERROR | ‘CreateFile’ for %s failed: %d | ||
| 18131 | ERROR | ‘WriteFile’ for %s failed: %d | ||
| 18132 | ERROR | ‘popen’ for %s failed: %d | ||
| 18133 | ERROR | (bug) buffer overflow | ||
| 18134 | ERROR | (bug) data is corrupted | ||
| 18135 | ERROR | ‘signature=’ line cannot be found. | ||
| 18136 | ERROR | signature ‘%s’ does not match. | ||
| 18137 | ERROR | ‘local_node=’ line cannot be found. | ||
| 18138 | ERROR | local_node ‘%s’ does not match. | ||
| 18139 | ERROR | ‘time=’ line cannot be found. | ||
| 18140 | ERROR | ‘sequence=’ line cannot be found. | ||
| 18141 | ERROR | sequence ‘%s’ scan failed. | ||
| 18142 | WARN | ‘node=’ line cannot be found. index=%d | ||
| 18143 | ERROR | ‘commstat=’ line cannot be found. index=%d | ||
| 18144 | ERROR | ‘checksum=’ line cannot be found. | ||
| 18145 | ERROR | checksum ‘%s’ scan failed. | ||
| 18146 | ERROR | checksum does not match. | ||
| 18147 | INFO | valid qwk object was found. sequence=%llu | ||
| 18148 | INFO | invalid qwk object was found. initializing to sequence 0. | ||
| 18149 | ERROR | qwk object was not found. | ||
| 18150 | DEBUG | write sequence %llu | ||
| 18151 | ERROR | failed to read qwk object. | ||
| 18152 | ERROR | failed to decode node_info. | ||
| 18153 | DEBUG | read sequence %llu | ||
| 18154 | WARN | sequence backed down from %llu to %llu. | ||
| 18155 | ERROR | ‘malloc’ for %zu failed: %d | ||
| 18156 | ERROR | thread_create() failed. index=%d | ||
| 18157 | INFO | lcd sys state: %s (It looks the same from its own node and from the target node.) | ||
| 18158 | INFO | lcd sys state of target node seen from own node: %s | ||
| 18159 | INFO | lcd sys state of own node seen from target node: %s | ||
| 18160 | DEBUG | remote node is DOWN. quiet_period=%lld | ||
| 18161 | INFO | timeout (status=CR4) | ||
| 18162 | INFO | quorum failed (status=CR3) | ||
| 18163 | INFO | remote node up (status=CR1) | ||
| 18164 | INFO | remote node down (status=CR2) | ||
| 18165 | DEBUG | Quorum check in progress: %d / %d | ||
| 18166 | INFO | quorum_verify(%s, %s): %s | ||
| 18167 | DEBUG | target_node ‘%s’ is unknown. | ||
| 18168 | INFO | witness_verify(%s, %s): %s | ||
| 18169 | INFO | terminate() | ||
| 18170 | ERROR | (bug) data is corrupted | ||
| 18171 | ERROR | format error in request. | ||
| 18172 | ERROR | format error in quorum_verify request. lkevent cannot be found. | ||
| 18173 | ERROR | format error in witness_verify request. lkevent cannot be found. | ||
| 18174 | ERROR | format error in witness_verify request. target_node cannot be found. | ||
| 18175 | ERROR | ‘%s’ is unknown command. | ||
| 18176 | DEBUG | process_each_request_thread | ||
| 18177 | ERROR | qwk_receive() did not receive full header. Close connection. | ||
| 18178 | ERROR | Request is too long. Close connection. | ||
| 18179 | ERROR | qwk_receive() did not receive full request. Close connection. | ||
| 18180 | ERROR | do_request() failed. | ||
| 18181 | ERROR | qwk_send() did not send full header. Close connection. | ||
| 18182 | ERROR | qwk_send() did not send full response. Close connection. | ||
| 18183 | DEBUG | process_each_request_thread() exit. | ||
| 18184 | ERROR | ConnectNamedPipe() failed. – error 0x%x | ||
| 18185 | ERROR | thread_create() failed. | ||
| 18186 | ERROR | CreateNamedPipe() failed. – error 0x%x | ||
| 18189 | ERROR | create_named_pipe() failed. | ||
| 18190 | ERROR | thread_create() failed. | ||
| 18193 | ERROR | ‘CreateThread’ failed. – error 0x%x | ||
| 18194 | ERROR | requst is too long. header.size=%zu | ||
| 18195 | ERROR | qwk_send() failed for header. | ||
| 18196 | ERROR | qwk_send() failed for request. | ||
| 18197 | ERROR | qwk_send() failed for termination. | ||
| 18198 | ERROR | qwk_receive() did not receive full header. | ||
| 18199 | ERROR | Response buffer is not enough large. Server sent %zu bytes. | ||
| 18200 | ERROR | qwk_receive() did not receive full response. | ||
| 18201 | ERROR | ‘%s’ is unknown command. | ||
| 18202 | ERROR | Usage: %s … | ||
| 18203 | ERROR | Cannot create named pipe. – error 0x%x | ||
| 18205 | ERROR | request_send() failed. | ||
| 18206 | ERROR | request_receive() failed. | ||
| 18207 | ERROR | ‘%s’ is unknown lkevent. | ||
| 18208 | ERROR | ‘%s’ is unknown qwktype. | ||
| 18209 | ERROR | ‘%s’ is unknown node state. | ||
| 18210 | ERROR | ‘%s’ is unknown quorum state. | ||
| 18211 | INFO | qwk object was restored. | ||
| 18212 | INFO | quorum state changed to %s. | ||
| 18213 | INFO | quorum state changed to %s. | ||
| 18215 | ERROR | %s is empty | ||
| 18216 | ERROR | qwk_storage_s3get for %s failed: %d (%s) | ||
| 18217 | ERROR | qwk_storage_s3put for %s failed: %d (%s) | ||
| 18218 | WARN | The first cycle did not complete before timeout (%lld ms). completed_num=%d | ||
| 18219 | ERROR | Cannot find the configuration for node ‘%s’ in the configuration file. If the configuration of the cluster is changed after the initialization, it needs to be initialized again. Please see the SIOS product documentation for information on how to reinitialize using qwk_storage_init command. |
Post your comment on this topic.