- Select Azure Home > Virtual machines > +Add and enter the values according to the following table.
Virtual machine | ||
---|---|---|
Subscription | Your subscription ID | This is the subscription ID issued when subscribing to Azure services. *Note 1 |
Resource group | sios20rg | |
Instance details | ||
Virtual machine name | Active node: sios20lknode01 Standby node: sios20lknode02 |
|
Region | (Asia Pacific) Southeast Asia | |
Availability Options |
|
“Availability Zone” is preferred, “Availability Set” is sufficient. |
Availability Set | sios20lkcluster | Created using the (create new) functionality when active. When in standby, references previously created item. |
Availability Zone (Configure only when Availability zone is selected in the Availability options) |
1 (active) 2 (standby) |
Select different Availability zones for the active and standby nodes lknode01 and lknode02 should be in different Availability Zones (for example, lknode01 in zone 1, lknode02 in zone 2). |
Image | Windows Server 2019 Datacenter | *Note 2 |
Azure Spot instance | No (default) | |
Size | Standard B2ms | 2/8g/4 *Note 3 *Note 4 |
Administrator account | ||
Username | lkadmin | |
Password | XXXXXXXX | |
Inbound port rules | ||
Public inbound ports | Allow selected ports | |
Select inbound ports | RDP (3389) | |
Would you like to use an existing Windows Server license? | No | If you have a separate Windows license, change this to Yes. |
*Note 1: If your SPS nodes are not going to be part of a Windows Domain, the Virtual Machine names should not contain any lower-case letters.
*Note 2: Select an OS version supported by LifeKeeper. The OS versions supported by LifeKeeper are listed in the Support Matrix for each version.
*Note 3: Make sure to select an instance size for which the Availability Set is available. Availability Set is not available for some instance sizes.
*Note 4: Be sure to select an instance size for which load balancing rules can be used. Load-balancing rules are not available for some instance sizes.
- After confirming your input, click Next: Disks.
- Configure the disks as follows.
Disks | ||
---|---|---|
Disk options | ||
OS Disk type | Premium SSD (default) | |
Data disks | ||
NAME | Active Node: sios20lknode01_DataDisk_0 Standby Node: sios20lknode02_DataDisk_0 |
Created via (create and attach a new disk) |
Source type | None (empty disk) (default) | |
Size | 30 GB | Configure per the diagram below |
Disk type | Premium SSD | |
Encryption type | (Default) Encryption at-rest with a platform-managed key | |
Enable shared disk | No |
(Create and attach a new disk)
(Change size)
- Click Next: Networking.
- Enter the following details.
Connect the first subnet you created (sios20sub1) to the virtual machine. With this, one network interface is connected. (The second network interface will be created and connected after the virtual machine is created.)
Networking | |||
---|---|---|---|
Virtual network | sios20vnet | ||
Subnet | sios20sub1(10.20.1.0/24) | *Note 1 | |
Public IP | Name | SIOS20LKNODE01-ip(active) SIOS20LKNODE02-ip(standby) |
Created using the (create new) functionality *Note 2 You must click the OK button after completing setup |
SKU | Standard(When the Availability zone is selected) Basic(When the Availability set is selected) |
||
Assignment | Static | ||
Routing preference | Microsoft network | ||
Availability zone (Configure only when Standard is selected for SKU) |
Zone 1(active) Zone 2(standby) |
||
NIC network security group | Basic | ||
Public inbound ports | Allow selected ports | ||
Select inbound ports | RDP (3389) | ||
Accelerated networking | Off (default) | ||
Place this virtual machine behind an existing load balancing solution? | Off (default) |
*Note 1: Connect the first subnet (sios20sub1) created in the previous step to the virtual machine.
*Note 2: In this procedure the Public IP is set in order to allow access to each cluster node via the Internet.
- Click Next: Management, Next: Advanced, Next: Tags, and then Next: Review+create.
- Verify that the settings are correct and click Create.
The virtual machine is created and deployed. Wait until the message “Your deployment is complete.” is displayed.
- After creating a standby VM, open Azure Home > Virtual machines > virtual machine name > Availability + scaling. Clicking on the Availability set name displays the Fault Domain of the virtual machine belonging to the Availability set. Make sure that the Fault Domain of the standby VM is different from that of the active VM. If a standby VM is in the same fault domain, recreate it.
- Temporarily suspend the virtual machine in order to change the network settings. In Azure Home > Virtual machines, select the virtual machine you just created and click Stop.
- Go to Azure Home > Virtual machines > Virtual machine name > Networking, click the first interface name.
- Open IP configurations in the left pane and click ipconfig1.
- Change the IP address assignment mode and IP address as shown in the table below and click Save at the top of the screen to save your settings.
ipconfig | |
---|---|
Public IP address | Enabled |
Assignment | Static |
IP address | Active node: 10.20.1.11 Standby node: 10.20.1.12 |
- Next, add a second network interface.
- From Azure Home > Virtual machines > Virtual machine name > Networking > click Attach network interface, then click Create network interface.
- Configure the network interface according to the following table and click Create.
Create network interface | ||
---|---|---|
Subscription | Your subscription ID | This is the subscription ID issued when subscribing to Azure services. (immutable) |
Resource group | sios20rg | |
Location | Southeast Asia | |
Name | Active node | sios20lknode01-nic2 Standby node: sios20lknode02-nic2 |
Virtual network | sios20vnet | (Cannot be changed |
Subnet | sios20sub2 (10.20.2.0/24) | *Note |
NIC Network security group | None | |
Private IP address assignment | Static | |
Private IP address | Active node: 10.20.2.11 Standby node: 10.20.2.12 |
|
Private IP address (IPv6) | No | |
Accelerated networking | Disabled |
*Note: Configure the first subnet (sios20sub2) created in the previous step for the virtual machine.
- Once a message indicates that the Create process is completed, go to Azure Home > Virtual machines > Virtual machine name > Networking, click on Attach network interface again, then select the NIC you just created, and click OK.
- Make sure that two interfaces are attached.
- Perform the steps in this section (Creating Cluster Nodes (Active and standby nodes)) for both the active node and standby node. Once both are created, start the two virtual machines and proceed to Creating Clients.
Post your comment on this topic.