特定のエラーコードを検索する場合は、Control + Fを使用します。
コード | 重大度 | メッセージ | 原因/処置 |
---|---|---|---|
18100 | デバッグ | qwk_global_lock: file=%s, line=%d | |
18101 | デバッグ | qwk_global_unlock: file=%s, line=%d | |
18102 | エラー | Periodic storage quorum check has not been done for %lld ms, which exceeds 2*QWK_STORAGE_HBEATTIME (%lld) ms. | |
18104 | エラー | usage: %s | |
18105 | 情報 | starting %s | |
18106 | エラー | qwk_config() failed. | |
18107 | エラー | thread_initialize() failed. | |
18108 | エラー | state_monitor_initialize() failed. | |
18109 | エラー | state_monitor() failed. | |
18110 | エラー | start_server() failed. | |
18111 | 情報 | shutdown %s | |
18112 | エラー | ‘fopen’ for %s failed: %d | |
18113 | エラー | ‘qwk_object_path=’ line cannot be found for %s. | |
18114 | エラー | ‘%s’ is unknown config. | |
18115 | エラー | configuration of hbeattime ‘%d’ is incorrect. | |
18116 | エラー | configuration of numhbeats ‘%d’ is incorrect. | |
18117 | エラー | configuration of timeout_multiplier ‘%d’ is incorrect. | |
18118 | エラー | configuration of lcmhbeattime ‘%d’ is incorrect. | |
18119 | エラー | configuration of lcmnumhbeats ‘%d’ is incorrect. | |
18120 | エラー | configuration of qwk_object_type is incorrect. | |
18121 | エラー | configuration of my_node is incorrect. | |
18122 | エラー | configuration of number_of_node ‘%d’ is incorrect. | |
18123 | エラー | configuration of number_of_object ‘%d’ is incorrect. | |
18124 | エラー | configuration of object node is incorrect. | |
18125 | エラー | configuration of object path is incorrect. | |
18126 | エラー | my_node is not include in qwk_objects. | |
18127 | エラー | ‘CreateFile’ for %s failed: %d | |
18128 | エラー | ‘ReadFile’ for %s failed: %d | |
18129 | エラー | ‘popen’ for %s failed: %d | |
18130 | エラー | ‘CreateFile’ for %s failed: %d | |
18131 | エラー | ‘WriteFile’ for %s failed: %d | |
18132 | エラー | ‘popen’ for %s failed: %d | |
18133 | エラー | (bug) buffer overflow | |
18134 | エラー | (bug) data is corrupted | |
18135 | エラー | ‘signature=’ line cannot be found. | |
18136 | エラー | signature ‘%s’ does not match. | |
18137 | エラー | ‘local_node=’ line cannot be found. | |
18138 | エラー | local_node ‘%s’ does not match. | |
18139 | エラー | ‘time=’ line cannot be found. | |
18140 | エラー | ‘sequence=’ line cannot be found. | |
18141 | エラー | sequence ‘%s’ scan failed. | |
18142 | 警告 | ‘node=’ line cannot be found. index=%d | |
18143 | エラー | ‘commstat=’ line cannot be found. index=%d | |
18144 | エラー | ‘checksum=’ line cannot be found. | |
18145 | エラー | checksum ‘%s’ scan failed. | |
18146 | エラー | checksum does not match. | |
18147 | 情報 | valid qwk object was found. sequence=%llu | |
18148 | 情報 | invalid qwk object was found. initializing to sequence 0. | |
18149 | エラー | qwk object was not found. | |
18150 | デバッグ | write sequence %llu | |
18151 | エラー | failed to read qwk object. | |
18152 | エラー | failed to decode node_info. | |
18153 | デバッグ | read sequence %llu | |
18154 | 警告 | sequence backed down from %llu to %llu. | |
18155 | エラー | ‘malloc’ for %zu failed: %d | |
18156 | エラー | thread_create() failed. index=%d | |
18157 | 情報 | lcd sys state: %s (It looks the same from its own node and from the target node.) | |
18158 | 情報 | lcd sys state of target node seen from own node: %s | |
18159 | 情報 | lcd sys state of own node seen from target node: %s | |
18160 | デバッグ | remote node is DOWN. quiet_period=%lld | |
18161 | 情報 | timeout (status=CR4) | |
18162 | 情報 | quorum failed (status=CR3) | |
18163 | 情報 | remote node up (status=CR1) | |
18164 | 情報 | remote node down (status=CR2) | |
18165 | デバッグ | Quorum check in progress: %d / %d | |
18166 | 情報 | quorum_verify(%s, %s): %s | |
18167 | デバッグ | target_node ‘%s’ is unknown. | |
18168 | 情報 | witness_verify(%s, %s): %s | |
18169 | 情報 | terminate() | |
18170 | エラー | (bug) data is corrupted | |
18171 | エラー | format error in request. | |
18172 | エラー | format error in quorum_verify request. lkevent cannot be found. | |
18173 | エラー | format error in witness_verify request. lkevent cannot be found. | |
18174 | エラー | format error in witness_verify request. target_node cannot be found. | |
18175 | エラー | ‘%s’ is unknown command. | |
18176 | デバッグ | process_each_request_thread | |
18177 | エラー | qwk_receive() did not receive full header. Close connection. | |
18178 | エラー | Request is too long. Close connection. | |
18179 | エラー | qwk_receive() did not receive full request. Close connection. | |
18180 | エラー | do_request() failed. | |
18181 | エラー | qwk_send() did not send full header. Close connection. | |
18182 | エラー | qwk_send() did not send full response. Close connection. | |
18183 | デバッグ | process_each_request_thread() exit. | |
18184 | エラー | ConnectNamedPipe() failed. – error 0x%x | |
18185 | エラー | thread_create() failed. | |
18186 | エラー | CreateNamedPipe() failed. – error 0x%x | |
18189 | エラー | create_named_pipe() failed. | |
18190 | エラー | thread_create() failed. | |
18193 | エラー | ‘CreateThread’ failed. – error 0x%x | |
18194 | エラー | requst is too long. header.size=%zu | |
18195 | エラー | qwk_send() failed for header. | |
18196 | エラー | qwk_send() failed for request. | |
18197 | エラー | qwk_send() failed for termination. | |
18198 | エラー | qwk_receive() did not receive full header. | |
18199 | エラー | Response buffer is not enough large. Server sent %zu bytes. | |
18200 | エラー | qwk_receive() did not receive full response. | |
18201 | エラー | ‘%s’ is unknown command. | |
18202 | エラー | Usage: %s … | |
18203 | エラー | Cannot create named pipe. – error 0x%x | |
18205 | エラー | request_send() failed. | |
18206 | エラー | request_receive() failed. | |
18207 | エラー | ‘%s’ is unknown lkevent. | |
18208 | エラー | ‘%s’ is unknown qwktype. | |
18209 | エラー | ‘%s’ is unknown node state. | |
18210 | エラー | ‘%s’ is unknown quorum state. | |
18211 | 情報 | qwk object was restored. | |
18212 | 情報 | quorum state changed to %s. | |
18213 | 情報 | quorum state changed to %s. | |
18215 | エラー | %s is empty | |
18216 | エラー | qwk_storage_s3get for %s failed: %d (%s) | |
18217 | エラー | qwk_storage_s3put for %s failed: %d (%s) | |
18218 | 警告 | The first cycle did not complete before timeout (%lld ms). completed_num=%d | |
18219 | エラー | Cannot find the configuration for node ‘%s’ in the configuration file. If the configuration of the cluster is changed after the initialization, it needs to be initialized again. Please see the SIOS product documentation for information on how to reinitialize using qwk_storage_init command. |
このトピックへフィードバック