The topic you requested could not be found.
Related topics are listed below.

Split-Brain FAQs

SIOS DataKeeper for Windows Technical Documentation » FAQs » Split-Brain FAQs

Scenario I am using DataKeeper in a non-cluster environment. I am mirroring from Server1 at one site to Server2 at a second site. Communication is broken due to site-to-site VPN, and I need to fail over from Server1 to Server2. I cannot access Server1 from anywhere.…

Using SIOS DataKeeper Standard Edition To Provide Disaster Recovery For Hyper-V Virtual Machines

SIOS DataKeeper for Windows Technical Documentation » User Guide » Using SIOS DataKeeper Standard Edition To Provide Disaster Recovery For Hyper-V Virtual Machines

Considerations When preparing a Hyper-V environment that spans subnets, subnetting may need to be taken into consideration for any applications that are running inside the virtual machine. Some applications “hard code” IP addresses into their…

PREPARETOBECOMETARGET

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » PREPARETOBECOMETARGET

EMCMD PREPARETOBECOMETARGET This command should only be used to recover from a Split-Brain condition. It should be run on the system where the mirror is to become a target and is only valid on a mirror source. This command causes the mirror to be deleted and the…

FAQs

SIOS DataKeeper for Windows Technical Documentation » FAQs

Refer to this section for answers to the most frequently asked questions about SIOS DataKeeper. ______________________________________________________________________________________________________________ Awareness of Windows Filenames and Directory Names AWS…

SWITCHOVERVOLUME

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » SWITCHOVERVOLUME

EMCMD SWITCHOVERVOLUME [-f] This command attempts to make the given system become the source for the requested volume. This command is for internal use only. The parameters are: This is the IP address of the system to become source. Note: Use the…

DataKeeper Notification Icon

SIOS DataKeeper for Windows Technical Documentation » User Guide » DataKeeper Notification Icon

The DataKeeper Notification Icon is an application that will show a summary of your DataKeeper mirrors in the Windows Notification Tray. The icon displayed indicates what conditions have been detected, with the following priority. Error: An error condition, such as…

CHANGEMIRRORTYPE

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » CHANGEMIRRORTYPE

EMCMD CHANGEMIRRORTYPE This command is used to change the mirror type of a mirror that is part of a DataKeeper job. Note: The volume must be online. Refer to the examples below. See Synchronous and Asynchronous Mirroring for information about the supported…

Many-to-One

SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » Many-to-One

This configuration involves multiple source servers replicating one (or more) volumes to the same target system. In this configuration, each volume being replicated to the target server must have a unique drive letter. Note: This is actually two One-to-One…

One-to-Many (Multiple Targets)

SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » One-to-Many (Multiple Targets)

This configuration involves one primary (source) system replicating one (or more) volume(s) to two different target systems across the network. This is referred to as a multiple target configuration. Note that there are two mirrors that are completely independent…

Primary Server Shutdown

SIOS DataKeeper for Windows Technical Documentation » Administration » Primary Server Shutdown

On a graceful shutdown of the source server, all pending writes to the target are completed. This ensures that all data is present on the target system. On an unexpected source server failure, the Intent Log feature eliminates the need to do a full resync after the…

User Guide

SIOS DataKeeper for Windows Technical Documentation » User Guide

The topics in this section are designed to be a reference for you as you get started using SIOS DataKeeper, helping you identify the type of configuration you are interested in implementing and providing detailed instructions for effectively using your SIOS DataKeeper…

One-to-One

SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » One-to-One

This is a simple one source, one target configuration, mirroring Volume X across the network. In addition to providing a second physical copy of the data, DataKeeper also provides the ability to switch over the mirror which allows the data to become active on the…

N-Shared-Disk Replicated to One

SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » N-Shared-Disk Replicated to One

This configuration allows you to replicate the shared volume(s) of the primary site to a remote system across the network. This configuration is ideal for providing local failover within the Primary Site and disaster recovery protection should the entire Primary…

GETVOLUMEDRVSTATE

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » GETVOLUMEDRVSTATE

EMCMD GETVOLUMEDRVSTATE This command retrieves the current state of the SIOS DataKeeper device driver. The parameters are: This can be either the source or the target systems. The drive letter of the volume you want to get the…

N-Shared-Disk Replicated to N-Shared-Disk

SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » N-Shared-Disk Replicated to N-Shared-Disk

This configuration replicates data between sites where each site utilizes shared storage. Note that the number of systems in the Primary Site does not have to equal the number of systems in the Remote Site. Also note that only the Source Server has access to the…

DataKeeper Components

SIOS DataKeeper for Windows Technical Documentation » Introduction » DataKeeper Components

SIOS DataKeeper for Windows is comprised of the following components: DataKeeper Driver (ExtMirr.sys) – The DataKeeper Driver is a kernel mode driver and is responsible for all mirroring activity between the mirror endpoints. DataKeeper Service…

Performance Tuning

SIOS DataKeeper for Windows Technical Documentation » Configuration » Performance Tuning

Please refer to the following topics for ways to improve SIOS DataKeeper performance. SIOS DataKeeper Intent Log – SIOS DataKeeper uses an intent log (also referred to as a bitmap file) to track changes made to the source, or to the target volume when the target…

SIOS DataKeeper Intent Log

SIOS DataKeeper for Windows Technical Documentation » Introduction » Understanding Replication » SIOS DataKeeper Intent Log

SIOS DataKeeper uses an intent log (also referred to as a bitmap file) to track changes made to the source, or to target volume during times that the target is unlocked. This log is a persistent record of write requests which have not yet been committed to both…

DataKeeper Service Log On ID and Password Selection

SIOS DataKeeper for Windows Technical Documentation » Configuration » DataKeeper Service Log On ID and Password Selection

During a new DataKeeper installation setup, the user will be prompted for a DataKeeper Service Log On ID and Password. The DataKeeper Service uses authenticated connections to perform volume switchovers and make mirror role changes across multiple servers. The Log On…

DataKeeper Service Log On ID and Password Selection

SIOS DataKeeper for Windows Technical Documentation » Introduction » DataKeeper Components » DataKeeper Service Log On ID and Password Selection

During a new DataKeeper installation setup, the user will be prompted for a DataKeeper Service Log On ID and Password. The DataKeeper Service uses authenticated connections to perform volume switchovers and make mirror role changes across multiple servers. The Log On…

SIOS DataKeeper for Windows Quick Start Guide

SIOS DataKeeper for Windows Quick Start Guide

This topic provides step-by-step instructions for installing and configuring DataKeeper Standard Edition. The series of steps includes links into the documentation that describe each step in detail. Prerequisites and Installation Read the SIOS Protection Suite for…

DataKeeper Target Snapshot

SIOS DataKeeper for Windows Technical Documentation » User Guide » DataKeeper Target Snapshot

Overview DataKeeper’s target snapshot feature, integrated with both DataKeeper and DataKeeper Cluster Edition, is the process of creating point in time copies of replicated volumes allowing access to data on a standby cluster node without interrupting data…