Use Control F to search for a specific error code.
| Code | Severity | Message | Cause/Action |
|---|---|---|---|
| 17 | Info | The SIOS DataKeeper Service version %1 is starting. | |
| 18 | Warning | The SIOS DataKeeper Service has been stopped. | |
| 19 | The SIOS DataKeeper Service has been paused. | ||
| 20 | The SIOS DataKeeper Service has been continued. | ||
| 21 | The SIOS DataKeeper Service terminated with error code %1 “%2” | ||
| 22 | Info | The SIOS DataKeeper Service has been installed successfully | |
| 23 | The SIOS DataKeeper Service has been successfully removed. | ||
| 24 | Debug checkpoint “%1” was encountered. | ||
| 25 | The registry value “%1” could not be found in the key “%2”. This value is required for the service to start successfully. Please reconfigure the service, or add the value to the above source. The service will be stopped. |
||
| 26 | While attempting to execute the function: “%1”, error %2 was encountered on line %3 in file: “%4”: | ||
| 27 | |||
| 28 | |||
| 29 | Error | Error 1073 while trying to create the SIOS DataKeeper service | |
| 30 | Error %1 while trying to Open the Service Control Manager | ||
| 31 | Error %1 while trying to install the SIOS DataKeeper service | ||
| 32 | While attempting to create thread: “%1”, error %2 was encountered on line %3 in file: “%4”: | ||
| 33 | The control connection to system “%1” could not be initialized. Pipe Name=”%2”. Command=”%3”. The error code was “%4”. | ||
| 34 | Cannot allocate enough memory. Line: %1 File: %2 | ||
| 35 | The GUI Thread pipe is waiting for a connection. | ||
| 36 | Error getting Service Info. | ||
| 37 | Command received from GUI: %1 | ||
| 38 | Exit command received from GUI. | ||
| 39 | Service STOP command received from GUI. | ||
| 40 | Info | Setting attributes for volume “X:”. New Attributes bitmap: “128” | |
| 41 | Error “%1” while trying to set the volume attributes for volume “%2”. | ||
| 48 | Pausing a mirror for volume “%1” with target system “%2” | ||
| 49 | |||
| 50 | Restarting a mirror for volume “%1” with target system “%2” | ||
| 51 | |||
| 52 | Unknown command received from GUI: %1 | ||
| 53 | Error %1 receiving command from GUI. | ||
| 54 | Error %1 sending response to GUI. | ||
| 55 | Error %1 creating GUI pipe. | ||
| 56 | Error %1 trying to connect to the GUI. | ||
| 57 | Error %1 trying to enable the process’s priviledge. | ||
| 58 | Error %1 trying to initialize the potential mirror structure. | ||
| 64 | Error %1 while trying to open the registry key %2 | ||
| 65 | Error %1 while trying to read the registry value %2 | ||
| 66 | Error %1 while trying to set the registry value %2 | ||
| 67 | String “%1” already exists in Registry key value: %2. | ||
| 69 | An auto-discover request was received by “%1”. | ||
| 70 | Info | The Auto Discovery thread is waiting for requests. | |
| 71 | The value read from the registry key is not of the expected type. Registry Value: %1 | ||
| 72 | Attempt to get the job associated with system ‘%3’ and volume ‘%4’ failed. Error: %5 | ||
| 73 | No job found associated with system ‘%3’ and volume ‘%4’. | ||
| 80 | Could not determine computername from FQDN ‘%3’ | ||
| 81 | The Compare Volume pipe is waiting for a connection | ||
| 82 | Attempt to set the cluster resource property ‘%3’ for volume ‘%4’ to value ‘%5’ failed. Error: ‘%6’ | ||
| 83 | Failed to open the key ‘%3’ for the Cluster Resource associated with volume ‘%4’. Error: %5 | ||
| 84 | Failed to get the Cluster Resource Key associated with volume ‘%3’. Error: %4 | ||
| 85 | Failed to get the Cluster Resource associated with volume ‘%3’. Error: %4 | ||
| 86 | Failed to get the state of the Cluster Resource associated with volume ‘%3’. Error: %4 | ||
| 87 | Failed to get the local computer name. Error: %3 | ||
| 88 | Resource Mirror State Property for Volume [%3:], Target:%4, State:%5 could not be saved in the Cluster Database. Error: %6 | ||
| 89 | Could not obtain a handle to the cluster. | ||
| 97 | Info | Event Log Monitor started monitoring the “System” log. | |
| 98 | Error code returned is [%1] | ||
| 99 | Couldn’t create an event for monitoring the event log by the service. The service can not continue. Error code returned is [%1]. | ||
| 100 | Couldn’t set the change notification for events for monitoring the event log by the service. The service can not continue. Error code returned is [%1] | ||
| 101 | The number of strings expected for the change status event were not received. The number received was [%1]. | ||
| 102 | The value for %1 could not be parsed from the event log because of error %2. | ||
| 112 | DataKeeper License Manager failed to initialize: %1 | ||
| 113 | Info | Found DataKeeper cluster permanent license key. | |
| 114 | Error | Error in obtaining SteelEye DataKeeper license key. | The hostid of this system does not match the hostid specified in the license file. |
| 115 | Info | DataKeeper cluster evaluation license key found, expires at midnight in 21 days. | |
| 116 | EM master license key has expired. | ||
| 117 | Error | No valid DataKeeper license key was found | |
| 118 | Warning | IMPORTANT NOTICE! SIOS DataKeeper on this system is using an evaluation license key which will expire at midnight on 06/07/09. To continue functioning beyond that time, a permanent license key must be obtained. Please contact the original supplier of your evaluation software, or visit http://www.steeleye.com for information about purchasing a permanent license key for SIOS DataKeeper. |
|
| 119 | Error | ERROR! The evaluation license key for SteelEye DataKeeper on this system has expired. Please contact the original supplier of your evaluation software, or visit http://www.steeleye.com for information about purchasing a permanent license key for SIOS DataKeeper. | |
| 120 | Error | SIOS DataKeeper shutdown is now in progress. | |
| 121 | The SIOS DataKeeper Service has started. Found EM restricted permanent license key. | ||
| 122 | Licensing initialization – server not ready. | ||
| 129 | |||
| 130 | Found SDR OEM Key | ||
| 131 | SDR OEM Key is not valid | ||
| 132 | SDR OEM Key is valid but has expired %1 seconds differential | ||
| 133 | Localization File `%1’ is invalid | ||
| 134 | Failed to get the current machine locale when locale restricted licensing is in operation | ||
| 135 | Found Locale restriction. Current Locale is `%1’ | ||
| 136 | This version of SDR is Licensed for the `%1’ locale, but you are not using this locale. | ||
| 137 | Failed to restore machine to `C’ locale. | ||
| 144 | The EventLog Monitoring thread received an unexpected return value in WaitForSingleObject – status %1. | ||
| 145 | The EventLog Monitoring thread received an unexpected return value in ReadEventLog – status %1. | ||
| 146 | Couldn’t open event log for monitoring by the service. Error code returned is [%1]. | ||
| 147 | Couldn’t set the change notification for events for monitoring the event log by the service. Error code returned is [%1]. | ||
| 148 | Unable to allocate memory for volume target information – service is terminating. | ||
| 149 | The number of strings expected for the change role event were not correct. Expected 5 strings. The number received was [%1]. | ||
| 173 | Unable to modify registry setting %2. | ||
| 174 | Info | Initiated switchover of mirror on volume H:\. | |
| 175 | Bad Arguments: Switchover called with %3 as the server name. | ||
| 176 | GetMirrorVolume for drive %4 failed with error number %3. | ||
| 177 | Info | Calling Failover for volume Y:\. | |
| 178 | Failover of volume %3 on has failed with error %4. | ||
| 179 | Info | Calling DeleteLocalMirrorOnly() for volume H:\. | |
| 180 | DeleteLocalMirrorOnly() for volume %3 failed with error %4. | ||
| 181 | Info | Calling CreateMirror(). | |
| 182 | CreateMirror() failed with error %3. | ||
| 183 | Info | Invoking switchover of mirror on volume Y:\ on source system 10.37.4.21. | |
| 184 | Mirror role is %3. Cannot continue with switchover of mirror. | ||
| 185 | Mirror role is %3. Cannot perform switchover of mirror. | ||
| 186 | Cannot determine IP address for mirror target %3. | ||
| 187 | Error | Switchover of mirror for drive E:\ cannot be performed. Mirror state is Resync. | |
| 188 | DataKeeper WSFC Resource ‘%3’ was not found in the Cluster folder. | ||
| 189 | DataKeeper was unable to access the local cluster. The handle is NULL. | ||
| 190 | Error | Failed to register the ‘DataKeeper Volume’ Resource DLL (DataKeeperVolume.dll). Error: 70 | Error 70 |
| 191 | Failed to create process to register DataKeeper Resource Extension DLL (%1). Error: %2 | ||
| 192 | Failed to register the ‘%1’ Resource Extension DLL (%2). Error: %3 | ||
| 193 | Failed to disable WOW64 Redirection. | ||
| 194 | Failed to re-enable WOW64 redirection. | ||
| 195 | Error | Attempt to connect to remote system 007IT-NAS-TW2 failed with error 5. | Error 5 |
| 195 | Error | Attempt to connect to remote system 007IT-NAS-TW2 failed with error 53. | Error 53 |
| 196 | Error | Attempt to connect to remote system 192.168.85.7 failed with error 53. Please ensure that the local security policy for “Network Access: Let Everyone permissions apply to anonymous users” is enabled on all the servers running DataKeeper. | Error 53 |
| 196 | Error | Attempt to connect to remote system MACHINE.FQDN failed with error 64. Please ensure that the local security policy for “Network Access: Let Everyone permissions apply to anonymous users” is enabled on all the servers running DataKeeper. | Error 64 |
| 196 | Error | Attempt to connect to remote system MACHINE.FQDN failed with error 64. Please ensure that the local security policy for “Network Access: Let Everyone permissions apply to anonymous users” is enabled on all the servers running DataKeeper. | Error 1326 |
| 196 | Error | Attempt to connect to remote system MACHINE.FQDN failed with error 1131. Please ensure that the local security policy for “Network Access: Let Everyone permissions apply to anonymous users” is enabled on all the servers running DataKeeper. | Error 1131 |
| 208 | Info | Creating a new job. | |
| 209 | Job (ID: %3) has invalid endpoints data. | ||
| 210 | Failed to create a GUID string. Error code was %3. | ||
| 211 | Info | Attempting to update job(ID: 86e75d13-c32b-441b-9663-1aa661a83310) info on local system. | |
| 212 | Failed to update job(ID: %3) on local system. Error code was %4. | ||
| 213 | Reading info for job(ID: %3). | ||
| 214 | Reading all jobs from the Registry. | ||
| 215 | Attempting to get all jobs from the registry. | ||
| 216 | Info | Updating job(ID: 8027a98a-fc8e-45f0-a9e9-cbccaef670f3) on all servers. | |
| 217 | Info | Attempting to delete job(ID: 910f97f2-12d0-4bfb-96bd-0f96d904d21f) on remote server VIRTSERVER3.TTT. LOCAL. | |
| 218 | Info | Attempting to update job(ID: 8027a98a-fc8e-45f0-a9e9-cbccaef670f3) on remote server MACHINE.FQDN | |
| 219 | Info | Update of job(ID: 86e75d13-c32b-441b-9663-1aa661a83310) info failed. Error code was 1326. | Error 234, 1326 |
| 220 | Info | Deleting job with ID DF04CDE3-5AA5-49FA-9410-8B6E57D12E77. | |
| 221 | Info | Deleting registry key for job with ID 910f97f2-12d0-4bfb-96bd-0f96d904d21f. | |
| 224 | Info | Registered ‘DataKeeper Volume’ Cluster Resource Type. | |
| 225 | Info | Registered ‘DataKeeper Volume’ Resource Extension DLL. | |
| 226 | Could not save mirror settings in registry. | ||
| 227 | Error | Switchover of volume Y:\ is aborting – unable to establish a connection to source system 10.37.4.21, although the source system appears to be online. Make sure that the SteelEye DataKeeper Service is running on system 10.37.4.21. | |
| 228 | Switchover of volume %3 is continuing – source system name with IP address %4 was not available from job info. | ||
| 229 | Creation of additional targets after primary switchover failed with status %3 | ||
| 230 | Info | Switchover of volume I:\ started on shared node. | |
| 231 | Info | Switchover of volume I:\ on shared node completed successfully. | |
| 232 | Error | Switchover of volume N:\ failed on shared node failed with error 1. | |
| 233 | Info | Shared node WINSUPB.QATEST.COM is the source of the existing mirror for volume I:\. | |
| 234 | Error | Shared node WINSUPB.QATEST.COM is the target of the existing mirror for volume N:\. | |
| 235 | Error | Mirror node RUFOUS.QATEST.COM is the source of the existing mirror for volume N:\. | |
| 236 | Info | Mirror node RUFOUS.QATEST.COM is the target of the existing mirror for volume I:\. | |
| 237 | Error | Switchover of mirror for volume E:\ on source system 172.17.102.129 failed with error 121. | Error [33], [121] |
| 238 | Info | Attempting to unlock volume I:\ before creating mirror. | |
| 239 | Attempting to unlock volume %3. | ||
| 240 | Info | Attempting to create mirror (source ip::vol – target ip::vol) 172.17.102.128::I – 172.17.108.135::I | |
| 241 | Create mirror failed with error %3. | ||
| 242 | IOCTL for configuration setting for volume %3 failed with error %4. | ||
| 243 | Switchover for mirror %3 completed. %4 mirrors created. | ||
| 256 | FLEXnet: The lc_flexinit_property_handle_create API has failed. Error: %3 | ||
| 257 | FLEXnet: The lc_flexinit_property_handle_set API has failed. Error: %3 | ||
| 258 | FLEXnet: The lc_flexinit API has failed. Error: %3 | ||
| 259 | FLEXnet: The lc_flexinit_cleanup API has failed. Error: %3 | ||
| 260 | FLEXnet: The lc_flexinit_property_handle_free has failed. Error: %3 | ||
| 261 | Attempt to enable shared configuration for volume %3 failed. Error: %4 | ||
| 262 | Attempt to disable shared configuration for volume %3 failed. Error: %4 | ||
| 263 | Directories could not be created for bitmap file: %3. Multi-target switchovers will require full resync. | ||
| 264 | Bitmap file could not be copied from old mirror source on %4. | ||
| 265 | Switchover for volume %3 was requested while volume was in the Source role. This is an invalid request and will be failed. | ||
| 266 | A request to prepare volume %3 to relinquish the Source role was received while the volume was not in the Source role. This is an invalid request and will be failed. | ||
| 267 | Info | Prepare volume I:\ to relinquish source role during switchover. | |
| 268 | Error number %3 getting mirror volume info for volume %4. | ||
| 269 | Error | Volume E: Mirror role 0 not allowed to pass mirror settings. | |
| 270 | Mirror in wrong role. Cannot update mirror setting on system %3 and volume %4. | ||
| 271 | Cannot connect to %3. Cannot send mirror property setting. | ||
| 272 | Error %3 setting mirror property on system %4 volume %5. | ||
| 273 | Error | Unsuccessful mirror settings broadcast to shared systems from WINSUPA.QATEST.COM. | |
| 274 | Error | Switchover of mirror for volume I:\ failed. Source system 10.1.29.21 did not have a mirror in the mirroring state to this target, failed with error 87. | Error 87 |
| 275 | Job update did not contain the correct number of endpoints. | ||
| 276 | During switchover, a shared source system did not respond to DataKeeper requests, but does not appear to be dead. Switchover will be aborted – that node may be the mirror source. Please make sure that the SIOS DataKeeper Service is running on all nodes. | ||
| 277 | Multiple shared nodes found to be in the Source role for volume %3. | ||
| 278 | The Job for volume %3 is non-standard and contains unexpected data. This could result in operational failures. Please ensure that the Job is configured correctly. | ||
| 279 | |||
| 280 | |||
| 281 | GetVolumeInfo for source volume %3 failed on server %4. Error %5. The volume is not configured or missing. Switchover is continuing. If the missing volume is replaced, you must force a full resync to the new media. | ||
| 289 | During switchover Old Source Volume %3 EmVolume.Open failed on server %4. A Full Resync is required. | ||
| 290 | Switchover for volume %3 on source system %4 has encountered a network error, code %5, and is attempting recovery . | ||
| 291 | A switchover request for volume %3 is being aborted. The volume is still Online on this cluster node. | ||
| 292 | A duplicate switchover request was detected for volume %3. Returned saved status: %4. | ||
| 293 | A duplicate switchover request was detected for volume %3, and the wait has failed. Wait error: %4. | ||
| 294 | Failed to detach filter driver %3 from volume %4. Error: %5. | ||
| 295 | Failed to load VirtDisk.dll. | ||
| 296 | Failed to find the %3 function in VirtDisk.dll! | ||
| 297 | Failed to create the Virtual Disk %3. Error: %4. | ||
| 298 | Failed to open the Virtual Disk %3. Error: %4. | ||
| 299 | Failed to attach the Virtual Disk %3. Error: %4. | ||
| 300 | Failed to detach the Virtual Disk %3. Error: %4. | ||
| 301 | Failed to retrieve the Physical Device Path for the Virtual Disk %3. Error: %4. | ||
| 302 | Failed to open the device %3. | ||
| 303 | Failed to initialize the device %3. | ||
| 304 | There is no snapshot location configured for volume %3. | ||
| 305 | The volume %3 could not be prepared for snapshotting. | ||
| 306 | The snapshot %3 could not be deleted. Error: %4 | ||
| 307 | The Snapshot files for volumes %1 have been initialized. Preparing to contact the source system to begin snapshotting. | ||
| 308 | The snapshots %3 do not have the same Source system. This is required for simultanious snapshots. | ||
| 309 | The volume %3 does not have a job associated with it. Jobs are required for snapshots. | ||
| 310 | Failed to create the Virtual Disk %3. File already exists and is in use. | ||
| 311 | The SIOS DataKeeper Service failed to quiesce a group of volumes: “%1”. | ||
| 312 | The SIOS DataKeeper Service %1 | ||
| 313 | The SIOS DataKeeper Service encountered a non-fatal issue when quiescing a group of volumes: | ||
| 314 | On source, no job found for snapshot target volume %3 on Server %4, Error %5. Snapshot cancelled. | ||
| 315 | On source, no matching miror found for snapshot to target volume %3 on Server %4. Snapshot cancelled. | ||
| 316 | Snapshot source volume 3 info was not found for snapshot to target volume %4 on target server %5, Error: 6. Snapshot cancelled. | ||
| 317 | Snapshot source volume %3 not in source role for snapshot to target volume %4 on target server %5. Snapshot cancelled. | ||
| 318 | Snapshot source volume %3 not in mirroring state for snapshot to target volume %4 on target server %5. Snapshot cancelled. | ||
| 319 | Snapshot source volume %3 was locked for snapshot to target volume %4 on target server %5. Snapshot cancelled. | ||
| 320 | Unable to stop driver snapshot operation for volume %3 – status %4. | ||
| 321 | While dropping snapshots for volumes %1 one or more error or warning conditions were encountered. | ||
| 322 | Snapshots for volumes %1 successfully dropped. | ||
| 323 | Failed to initiate snapshot of volume %3 on target system %4, status %5. | ||
| 324 | Failed to initiate snapshot of volume %3 on target system %4, status %5. Could not open handle to the volume. | ||
| 325 | Failed to retrieve snapshot initialization status of volume %3 on target system %4, status %5. | ||
| 326 | Failed to retrieve snapshot initialization status of volume %3 on target system %4, status %5. Could not open handle to the volume. | ||
| 327 | Snapshot initialization of volume %3 on target system %4 failed with status %5. | ||
| 328 | Snapshot requested for volumes %1. | ||
| 329 | Snapshot for volumes %1 created successfully. | ||
| 330 | Failed to wait for snapshot drop operation to complete, status %1. | ||
| 331 | One or more drop events was abandoned while waiting for snapshot drop operation to complete. | ||
| 332 | Timed out while waiting for snapshot drop operation to complete. | ||
| 333 | Failed to signal a drop-complete event, status %1. | ||
| 334 | During switchover of volume %2 volume open failed with status %1. Switchover aborted. | ||
| 335 | Attempt to switchover volume %2 is being aborted because there is a snapshot active on the volume. Query status was %1. | ||
| 336 | Cluster registration of volume %1 failed with status %2. Refer to product documentation for steps to manually create a cluster resource. | ||
| 337 | Failed to determine the status of volume %3 on system %4. Error: %5. | ||
| 338 | DataKeeper WSFC resource file ‘%3’ could not be copied to the Cluster at ‘%4’, Error: ‘%5’. | ||
| 339 | DataKeeper WSFC resource file ‘%3’ was missing in the DataKeeper folder. Cluster registration cannot be performed. | ||
| 340 | Shared Volume failover of volume %3 encountered an error using the Shared Owner file. %5 : status %4. | ||
| 341 | Shared Volume switchover of volume %3 failed. No shared targets were reported by the current source system. | ||
| 342 | ClearBlockTarget() on system %3 for volume %4 failed with error %5. | ||
| 343 | SetConfiguration() on system %3 for volume %4 failed with error %5. | ||
| 344 | ClearBlockTarget() volume open on system %3 for volume %4 failed with error %5. | ||
| 345 | Successfully added DataKeeperVolume registry entries. | ||
| 346 | Failed to add DataKeeperVolume registry entries. Failed with error %3. | ||
| 347 | Unable to determine if the mirror break to %3 for volume %4 was user requested. Setting to user requested. | ||
| 348 | Failed to find job for server %3 and volume %4. Error: %5. | ||
| 349 | Successfully set the cluster resource property ‘%3’ for volume ‘%4’ to value ‘%5’. | ||
| 350 | Failed to change mirror type. %4 | ||
| 352 | Info | IMPORTANT – VSS Quiesce failed. This may be due to the SIOS VSS Provider not being activated. To activate the SIOS VSS Provider, run the script “install-siosprovider.cmd” which is located in “%ExtMirrBase%\VSSProvider”. | |
| 353 | Info | About to update the cluster resource property ‘%3’ for volume ‘%4’ to value ‘%5’. | |
| 354 | Error | Failed to set the shared configuration flag for volume ‘%3’ – status ‘%4’. | Use EMCMD SETCONFIGURATION to set the flag manually. |
| 355 | Error | Failed to copy bitmap file from previous source %3. Volume %4, target IP on old source %5. Status %6. | |
| 356 | Error | ValidateBitmapCopyRequest returned error for volume %3 target IP %4 with reason %5.Status %6. | |
| 357 | Error | GetBitmapFileChunk returned error for volume %3 with reason %4, target IP %5, chunkoffset %6, file name %7. Status %8. | |
| 358 | Error | Attempt to create a job without a DataKeeper license failed. You need to install a valid DataKeeper license before creating a job. | |
| 359 | Error | Attempt to create a mirror without a DataKeeper license failed. You need to install a valid DataKeeper license before creating a mirror. | |
| 360 | Warning | Failed to connect to source system %4 to invoke switchover of volume %3 – status %5. Continuing with switchover – split brain will be resolved later. |
Post your comment on this topic.