Search
Related topics are listed below.
Secondary Server Failures
DataKeeper Cluster Edition Technical Documentation » Administration » Secondary Server Failures
In the event there is a failure affecting the secondary (target) system, the affected mirror is marked Paused. It is necessary to correct the condition that caused the secondary to fail and then resync the volumes. There are no write attempts made to the target after…
Server 2012: Server Manager “File and Storage Services” Disk Status
DataKeeper Cluster Edition Technical Documentation » FAQs » Server 2012: Server Manager “File and Storage Services” Disk Status
Question Why are DataKeeper Volumes that are being used in a Microsoft Failover Cluster not shown by Server Manager as “Clustered”? Answer On Server 2012, the new Server Manager tool is capable of detecting if a complete “Disk” is being used by Failover…
Windows Server 2016 Specific Issues
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Known Issues and Workarounds » Windows Server 2016 Specific Issues
For issues related to Windows Server 2016, see the following topic: ____________________________________________________________________________________________________________________ Occasional Job Creation Failure WSFC 2016 File Shares Cannot be Created…
Configure a File Server Cluster in Azure Spanning Multiple Availability Zones(AZ)
DataKeeper Cluster Edition in a Cloud Environment » Configure a File Server Cluster in Azure Spanning Multiple Availability Zones(AZ)
This step by step guide contains detailed steps that are required to deploy a 2-node File Server Failover Cluster that spans the new Availability Zones in a single region of Azure. The guide assumes that you have basic knowledge of Azure as well as Failover Clustering.…
Installing and Using DataKeeper Cluster Edition on Windows Server 2008 R2 / 2012 Core Platforms
DataKeeper Cluster Edition Technical Documentation » User Guide » Clustering » Installing and Using DataKeeper Cluster Edition on Windows Server 2008 R2 / 2012 Core Platforms
Prepare the servers. Install Windows Server 2008 R2/2012 Core on two servers, configure IP, join a domain, configure firewall for remote administration, configure the server for remote access and install the Failover Cluster feature. Server Core Installation…
Removing a Clustered DataKeeper Volume
DataKeeper Cluster Edition Installation Guide » Installation » Removing a Clustered DataKeeper Volume
To remove a Clustered DataKeeper Volume follow these steps: Launch the Failover Cluster Manager. Select the Role and related DataKeeper Storage. Remove the DataKeeper Volume resource from the Role. This will move the DataKeeper Volume resource to the…
Remove DataKeeper Storage from a Windows Server Failover Cluster Role
DataKeeper Cluster Edition Technical Documentation » FAQs » Remove DataKeeper Storage from a Windows Server Failover Cluster Role
To remove an existing DataKeeper Resource/Mirror from Windows Server Failover Clustering: Without impacting the existing role in WSFC, i.e. File Shares, SAP, Oracle, SQL Without having to run various emcmd commands, e.g. deletelocalmirroronly,…
Setup of iSCSI Initiator on Windows 2012
DataKeeper Cluster Edition Technical Documentation » User Guide » Using Microsoft iSCSI Target With DataKeeper on Windows 2012 » Setup of iSCSI Initiator on Windows 2012
Once the virtual disks/targets are created, each of the cluster servers must initiate a connection to them via Microsoft’s iSCSI Initiator. From “Administrator Tools” in “Server Manager”, start “iSCSI Initiator”. Select the “Targets” tab and…
Using Microsoft iSCSI Target With DataKeeper on Windows 2012
DataKeeper Cluster Edition Technical Documentation » User Guide » Using Microsoft iSCSI Target With DataKeeper on Windows 2012
The following topics will guide you in setting up Microsoft iSCSI Target with DataKeeper via the user interface. *NOTE: This configuration is not supported in a VMware ESX environment. …
Switchover and Failover with Multiple Targets
DataKeeper Cluster Edition Technical Documentation » User Guide » Configuring Mirrors » Switchover and Failover with Multiple Targets
In a multiple target configuration, it is important to understand how DataKeeper mirrors will work in the following scenarios: Manual switchover to a target server Source server failure followed by a manual switchover to a target server Example: In the…
Creating Other Server Resource in WSFC
DataKeeper Cluster Edition Technical Documentation » User Guide » Clustering » Creating Other Server Resource in WSFC
When creating an Other Server resource in WSFC, you will be prompted for a storage resource (DataKeeper resource) twice. You will check the first one, but do not need to check the second dialog. Click the “checkbox” for the first dialog “Select…
Primary Server Shutdown
DataKeeper Cluster Edition Technical Documentation » Administration » Primary Server Shutdown
On a graceful shutdown of the source server, all pending writes to the target are completed. This ensures that all data is present on the target system. On an unexpected source server failure, the Intent Log feature eliminates the need to do a full resync after the…
WSFC 2016 File Shares Cannot be Created for File Server Role Using Server Manager or Failover Cluster Manager
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Known Issues and Workarounds » Windows Server 2016 Specific Issues » WSFC 2016 File Shares Cannot be Created for File Server Role Using Server Manager or Failover Cluster Manager
Description Once a cluster File Server role is created, neither Server Manager nor Failover Cluster Manager can be used to initially create the share. Suggested Action Microsoft Article 2804526 provides a high level overview of several WSFC Server 2016 issues…
Using DKCE to Enable Multi-Site File Share Resources with Windows Server 2008R2 WSFC
DataKeeper Cluster Edition Technical Documentation » User Guide » Clustering » Using DKCE to Enable Multi-Site File Share Resources with Windows Server 2008R2 WSFC
Use the following procedure to protect File Share resources using SIOS DataKeeper and Microsoft Failover Cluster (WSFC). *IMPORTANT NOTE: DataKeeper Cluster Edition registration with Failover Cluster is automatic and occurs 60 seconds after detecting a Failover…
Connecting to a Server
DataKeeper Cluster Edition Technical Documentation » User Guide » Getting Started » Connecting to a Server
Use this dialog to connect to the server of your choice. You may enter the IP address, system NetBIOS name or the full system domain name for the server. Click Connect to select it.
Disconnecting from a Server
DataKeeper Cluster Edition Technical Documentation » User Guide » Getting Started » Disconnecting from a Server
Use this dialog to disconnect from a server. You may use this option if you no longer wish to view the server in the Administration Window. From the list of servers, select the server(s) that you wish to disconnect from and click Disconnect.
Server Login Accounts and Passwords Must Be Same on Each Server in the Cluster
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Known Issues and Workarounds » Server Login Accounts and Passwords Must Be Same on Each Server in the Cluster
The DataKeeper GUI cannot connect to the target server in a cluster if server Login Accounts and Passwords are different on each server. Error Message An Error Code 1326 will appear in the Application log (Note: The Error Code may also be a 2 with Event ID…
Step by Step SQL Server 2019 FCI in OCI
Step by Step SQL Server 2019 FCI in OCI
Introduction *The steps in this guide are very similar on all currently supported versions of Windows and SQL Server. If you are deploying business-critical applications in Oracle Cloud Infrastructure (OCI), it’s crucial to understand and leverage the…
Creating the SQL Server FCI
Step by Step SQL Server 2019 FCI in OCI » Creating the SQL Server FCI
Install DataKeeper Cluster Edition Before you can proceed with the next steps, you must install DataKeeper Cluster Edition on SQL1 and SQL2. Download the setup executable and run the DataKeeper setup on both nodes. Refer to the SIOS documentation for specific guidance…
Manual Deployment of a SQL Server Failover Cluster Instance
DataKeeper Cluster Edition in a Cloud Environment » Deploying DataKeeper Cluster Edition in AWS » Manual Deployment of a SQL Server Failover Cluster Instance
*DISCLAIMER: While the following completely covers the high availability portion within the scope of our product, this is a setup “guide” only and should be adapted to your own configuration. *Please refer to the AWS Marketplace for a list of supported…
Deploying a File Server Failover Cluster Instance using the Azure Portal
DataKeeper Cluster Edition in a Cloud Environment » Configure a File Server Cluster in Azure Spanning Multiple Availability Zones(AZ) » Deploying a File Server Failover Cluster Instance using the Azure Portal
To build a 2-node File Server Failover Cluster Instance in Azure, we are going to assume you have a basic Virtual Network based on Azure Resource Manager and you have at least one virtual machine up and running and configured as a Domain Controller. Once you have a…
Extending a Clustered DataKeeper Volume to a Node Outside the Cluster
DataKeeper Cluster Edition Technical Documentation » User Guide » Clustering » Extending a Clustered DataKeeper Volume to a Node Outside the Cluster
DataKeeper Volume cluster resources can be extended to a DR Node for Disaster Recovery purposes. In the event of a complete failure of all systems in the cluster, data will be accessible on the DR Node (referred to as the “DR Node”). Here you will find instructions…
Deploying DataKeeper Cluster Edition in Azure
DataKeeper Cluster Edition in a Cloud Environment » Deploying DataKeeper Cluster Edition in Azure
DEPLOYING MICROSOFT SQL SERVER 2017 FAILOVER CLUSTERS IN AZURE RESOURCE MANAGER (ARM) Before beginning, make sure you read the DataKeeper Cluster Edition Release Notes for the latest information. It is highly recommended that you read and understand the DataKeeper…
Deploying DataKeeper Cluster Edition in AWS
DataKeeper Cluster Edition in a Cloud Environment » Deploying DataKeeper Cluster Edition in AWS
Introduction Best Practices Recommended Instance Types Manual Deployment of a SQL Server Failover Cluster Instance
Switchover in an N-Shared x N-Shared Configuration
DataKeeper Cluster Edition Technical Documentation » User Guide » Clustering » Switchover in an N-Shared x N-Shared Configuration
In a multi-shared storage environment between two sites (as shown in the diagram below), each server in each site has access to the storage being shared between the servers at that site. When a DataKeeper mirror is created, one server in each site will be designated…
Antivirus Software, Malware, etc. Exclusions for DataKeeper for Windows
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Known Issues and Workarounds » Antivirus Software, Malware, etc. Exclusions for DataKeeper for Windows
Description Antivirus software, Malware tools and other system security monitoring tools could interfere with the proper running of DataKeeper and stop DataKeeper from updating a DataKeeper registry key. All of the following should be considered as some can also…
DataKeeper Cluster Edition in a Cloud Environment
DataKeeper Cluster Edition in a Cloud Environment
Deploying DataKeeper Cluster Edition in AWS Deploying DataKeeper Cluster Edition in Azure How to cluster SAP ASCS and ERS on Windows in AWS using WSFC with SIOS DataKeeper Configure a File Server Cluster in Azure Spanning Multiple Availability…
Creating a DataKeeper Volume Resource in WSFC
DataKeeper Cluster Edition Technical Documentation » User Guide » Clustering » Creating a DataKeeper Volume Resource in WSFC
Automatic Creation of a Mirror in WSFC Use the SIOS DataKeeper GUI to configure a mirror. At the completion of the mirror creation operation, the following dialog box will pop up which will allow you to automatically add the mirror as a DataKeeper volume…
Awareness of Windows Filenames and Directory Names
DataKeeper Cluster Edition Technical Documentation » FAQs » Awareness of Windows Filenames and Directory Names
Question Is SIOS DataKeeper aware of Windows filenames and directory names? Answer SIOS DataKeeper is implemented with a Windows kernel mode filter driver that sits above the physical disk driver but below the file system. As a result, the SIOS DataKeeper driver…
Extending a Traditional 2-Node WSFC SQL Server Cluster to a Third Node via DataKeeper
DataKeeper Cluster Edition Technical Documentation » User Guide » Clustering » Extending a Traditional 2-Node WSFC SQL Server Cluster to a Third Node via DataKeeper
When replicating from a WSFC SQL Server 2-node cluster to a third node via DataKeeper, the following tasks are required: Replace the existing WSFC physical disk resource with a DataKeeper volume resource that supports data replication. Change the quorum type to…
Install DataKeeper
DataKeeper Cluster Edition in a Cloud Environment » Configure a File Server Cluster in Azure Spanning Multiple Availability Zones(AZ) » Install DataKeeper
After the cluster is created, DataKeeper is installed. It is important to install DataKeeper after the initial cluster is created so the custom cluster resource type can be registered with the cluster. If you installed DataKeeper before the cluster was created you will…
DataKeeper Troubleshooting
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting
The topics in this section contain important information about known issues and restrictions offering possible workarounds and/or solutions. Solutions Known Issues and Workarounds Message Catalogs Restrictions
DataKeeper Volume cannot come Online after Network Failure with Clustered IP Address on Replication Network
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Known Issues and Workarounds » DataKeeper Volume cannot come Online after Network Failure with Clustered IP Address on Replication Network
If you have multiple cluster networks, IP Addresses shouldn’t be set up on the same network that DataKeeper Volume resources are using for replication. Network errors may cause the DataKeeper mirror to go into a Paused state. If the network error also causes the…
How to cluster SAP ASCS and ERS on Windows in AWS using WSFC with SIOS DataKeeper
DataKeeper Cluster Edition in a Cloud Environment » How to cluster SAP ASCS and ERS on Windows in AWS using WSFC with SIOS DataKeeper
Introduction The following is a detailed, step-by-step guide on how to cluster SAP ASCS and ERS running on Windows in the AWS cloud. The examples assume that there are two nodes in the cluster (SIOS1, SIOS2) and each node resides in a different availability zone in…
Delete and Switchover Actions Grayed Out
DataKeeper Cluster Edition Technical Documentation » FAQs » Delete and Switchover Actions Grayed Out
Question Why are the Delete and Switchover actions grayed out on the DataKeeper User Interface? Answer If the volume is under clustering protection (Microsoft clustering or SIOS LifeKeeper clustering), these actions are disabled.
Extending a Single SQL Server Node to a Cluster
DataKeeper Cluster Edition Technical Documentation » User Guide » Clustering » Extending a Single SQL Server Node to a Cluster
This guide explains how to install a single SQL Server node and extend it to a clustered node. Please read this document carefully prior to installation. Planning Steps: Start with a Microsoft SQL Server standalone node, where data resides on the C drive. Note:…
About DataKeeper Licensing
DataKeeper Cluster Edition Installation Guide » About DataKeeper Licensing
DataKeeper Cluster Edition requires a unique license for each server. The license is a run-time license which means that you can install it without the license, but the license must be installed before you can successfully start and run DataKeeper Cluster…
DataKeeper Target Snapshot
DataKeeper Cluster Edition Technical Documentation » User Guide » DataKeeper Target Snapshot
Overview *The TAKESNAPSHOT command does not work with mirrors that have different drive letters. DataKeeper’s target snapshot feature, integrated with both DataKeeper and DataKeeper Cluster Edition, is the process of creating point in time copies of replicated…
DataKeeper Volume Resize
DataKeeper Cluster Edition Technical Documentation » User Guide » Working With Mirrors » DataKeeper Volume Resize
DataKeeper allows users to extend and shrink their DataKeeper volumes dynamically while retaining mirror settings. Once the resize is complete, a partial resync will be performed. Note: This resize procedure should be performed on only one volume at a time. !WARNING …
DataKeeper Notification Icon
DataKeeper Cluster Edition Technical Documentation » User Guide » DataKeeper Notification Icon
Mirror Status Notification The DataKeeper Notification Icon is an application that will show a summary of your DataKeeper mirrors in the Windows Notification Tray. The icon displayed indicates what conditions have been detected, with the following priority. Error:…
Manual Creation of a Mirror in WSFC
DataKeeper Cluster Edition Technical Documentation » User Guide » Clustering » Creating a DataKeeper Volume Resource in WSFC » Manual Creation of a Mirror in WSFC
!Before creating an Empty Role, verify that your mirror(s) are Highly Available by confirming that they are listed in the Failover Cluster Manager\Storage Disk as Available Storage. If you do NOT see your mirror(s) listed as Available Storage, they are NOT Highly…
Creating Mirrors With Multiple Targets
DataKeeper Cluster Edition Technical Documentation » User Guide » Configuring Mirrors » Creating Mirrors With Multiple Targets
SIOS DataKeeper provides the ability to replicate data from a single source volume to one or more target volumes. In addition, DataKeeper also allows you to switch over control and make any of the target volumes become the source. Assuming you have already created a…
One-to-Many (Multiple Targets)
DataKeeper Cluster Edition Technical Documentation » User Guide » Getting Started » One-to-Many (Multiple Targets)
This configuration involves one primary (source) system replicating one (or more) volume(s) to two different target systems across the network. This is referred to as a multiple target configuration. Note that there are two mirrors that are completely independent…
SIOS DataKeeper Cluster Edition
SIOS DataKeeper Cluster Edition
Your information resource for SIOS DataKeeper Cluster Edition SIOS Technology Corp. maintains documentation for all supported versions of SIOS DataKeeper Cluster Edition. We welcome your suggestions and feedback. To help us continue to improve our documentation,…
SIOS DataKeeper Intent Log
DataKeeper Cluster Edition Technical Documentation » Understanding Replication » SIOS DataKeeper Intent Log
SIOS DataKeeper uses an intent log (also referred to as a bitmap file) to track changes made to the source, or to target volume during times that the target is unlocked. This log is a persistent record of write requests which have not yet been committed to both…
Setting Up SIOS DataKeeper
DataKeeper Cluster Edition Technical Documentation » User Guide » Getting Started » Setting Up SIOS DataKeeper
Setting Up SIOS DataKeeper Follow these steps to start using SIOS DataKeeper: Connect to the servers you wish to configure for replication. You can select Connect to Server from the Action pull down menu, right-click on the job folder in the left panel tree…
DataKeeper Volume Resize Restriction
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Restrictions » DataKeeper Volume Resize Restriction
The DataKeeper volume resize procedure should be performed on only one volume at a time.
DataKeeper Cluster Edition Installation Guide
DataKeeper Cluster Edition Installation Guide
The DataKeeper Cluster Edition Installation Guide contains information on how to properly install and license your software. The DataKeeper Cluster Edition Technical Documentation provides more detailed information necessary to complete your…
Uninstalling SIOS DataKeeper Cluster Edition
DataKeeper Cluster Edition Installation Guide » Uninstalling SIOS DataKeeper Cluster Edition
Before Removing DataKeeper If planning to uninstall DataKeeper and reinstall a previous version, all jobs/mirrors must be deleted on each node prior to uninstalling. These will need to be recreated once software is reinstalled. Uninstall DataKeeper Cluster…
DataKeeper Cluster Edition Technical Documentation
DataKeeper Cluster Edition Technical Documentation
DataKeeper with High Availability – Cluster Edition Overview SIOS DataKeeper is a highly optimized host-based replication solution which ensures your data is replicated as quickly and as efficiently as possible from your source server across the network to one…
Using EMCMD with SIOS DataKeeper
DataKeeper Cluster Edition Technical Documentation » Using EMCMD with SIOS DataKeeper
The EMCMD utility that ships with SIOS DataKeeper provides users with a command line method to manipulate the mirror. Because these scripts run in situations where the “normal” validation rules may not apply, EMCMD does not perform the same kinds of sanity…
Using DKPwrShell with SIOS DataKeeper
DataKeeper Cluster Edition Technical Documentation » Using DKPwrShell with SIOS DataKeeper
SIOS DataKeeper includes a powershell module (DKPwrShell) that allows a user to manipulate a DataKeeper mirror using Microsoft Powershell. Commands are passed to a SIOS DataKeeper service and will fail if the service is not running. With Microsoft Powershell v3 or…
DataKeeper Volume Resource Health Check
DataKeeper Cluster Edition Technical Documentation » User Guide » Clustering » DataKeeper Volume Resource Health Check
A DataKeeper Volume resource provides two functions that are used by the Microsoft Cluster service to check for availability and health of the DataKeeper Volume resource. A simple check LooksAlive and a more rigorous check IsAlive. LooksAlive The Cluster service…
DataKeeper Volume Resource Private Properties
DataKeeper Cluster Edition Technical Documentation » User Guide » Clustering » DataKeeper Volume Resource Private Properties
A DataKeeper Volume resource includes several private properties that are used by DataKeeper Cluster Edition. Among these properties are: VolumeLetter (REG_SZ) – the volume letter that is replicated by DataKeeper and associated with this DataKeeper Volume…
Bitlocker Does Not Support DataKeeper
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Restrictions » Bitlocker Does Not Support DataKeeper
According to Microsoft, Bitlocker is not supported to work with Software RAID configurations. Since DataKeeper is essentially a software RAID 1, Microsoft does not support Bitlocker working with DataKeeper. * EFS (Encrypting File System) , *TDE (Transparent Disk…
DataKeeper Service (ExtMirrSvc) Message Catalog
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Message Catalogs » DataKeeper Service (ExtMirrSvc) Message Catalog
Use Control F to search for a specific error code. Code Severity Message Cause/Action 17 Info The SIOS DataKeeper Service version %1 is starting. 18 Warning The SIOS DataKeeper Service has been…
DataKeeper GUI (SDRSnapIn) Message Catalog
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Message Catalogs » DataKeeper GUI (SDRSnapIn) Message Catalog
Use Control F to search for a specific error code. Code Severity Message Cause Action 0 Error SDRDataKeeperService: Mirror creation failed, rolling back the job endpoint. 0 Warning…
DataKeeper Driver (ExtMirr) Message Catalog
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Message Catalogs » DataKeeper Driver (ExtMirr) Message Catalog
Use Control F to search for a specific error code. Code Severity Message Cause Action 1 Info The SteelEye DataKeeper driver version 7.0 has started successfully. 2 Error The…
DataKeeper Cluster Edition Release Notes
DataKeeper Cluster Edition Release Notes
SIOS DataKeeper Cluster Edition Release Notes Version 8.11.0 Released June 26, 2025 !IMPORTANT: End of Support for 2012/2012 R2 SIOS has ended support for Microsoft Windows Server 2012/2012 R2 on October 10, 2024. LifeKeeper for Windows Version 8.9.2 is the…
Upgrading SIOS DataKeeper Cluster Edition
DataKeeper Cluster Edition Installation Guide » Upgrading SIOS DataKeeper Cluster Edition
!Before upgrading to v8.11.0 or v10.0, see this Known Issue. !Before upgrading from v8.10.2 to v10.0 or v8.11.0 to v10.0, see this Known Issue. Upgrading DataKeeper Cluster Edition from previous versions of DataKeeper Cluster Edition is very straightforward. Simply…
Add a New Disk / DK Volume to an Existing Clustered SQL Role
DataKeeper Cluster Edition Technical Documentation » FAQs » Add a New Disk / DK Volume to an Existing Clustered SQL Role
When adding an additional disk to an existing cluster, the dependency relationship must be verified and configured manually based on the following requirements: The IP Address and the Disk Resource/DataKeeper Volume do not depend on anything The SQL Network Name…
DataKeeper Cluster Edition Quick Start Guide
DataKeeper Cluster Edition Quick Start Guide
This topic provides step-by-step instructions for installing and configuring DataKeeper Cluster Edition. The series of steps includes links to the documentation that describe each step in detail. Prerequisites and Installation Read the DataKeeper Cluster Edition…
Error 1265 when running DataKeeper Takesnapshot
DataKeeper Cluster Edition Technical Documentation » Components » DataKeeper Service Log On ID and Password Selection » Error 1265 when running DataKeeper Takesnapshot
PROBLEM: Taking a snapshot when running the command on the target system with DataKeeper fails with error 1265. C:\Program Files (x86)\SIOS\DataKeeper>emcmd (target-server-name) TAKESNAPSHOT (volume-letter of mirrored volume) Status = 1265 emcmd (target system…
Relocation of Intent Log
DataKeeper Cluster Edition Technical Documentation » Understanding Replication » Relocation of Intent Log
To relocate the Intent Log (bitmap file), please perform the following on all servers involved: *LEAVE THE MIRROR IN THE MIRRORING STATE! Do not pause it and then move the bitmap file. *Note: DataKeeper only supports bitmaps on NTFS filesystems. If the bitmaps…
N-Shared-Disk Replicated to Multiple N-Shared-Disk Targets
DataKeeper Cluster Edition Technical Documentation » User Guide » Getting Started » N-Shared-Disk Replicated to Multiple N-Shared-Disk Targets
This is a complex configuration which combines the aspects of replicating a shared storage environment to multiple shared targets. Note that the number of systems in the Primary Site does not have to equal the number of systems in the Remote Site. Also note that…
DataKeeper Service Log On ID and Password Selection
DataKeeper Cluster Edition Technical Documentation » Components » DataKeeper Service Log On ID and Password Selection
During a new DataKeeper installation setup, the user will be prompted for a DataKeeper Service Log On ID and Password. The DataKeeper Service uses authenticated connections to perform volume switchovers and make mirror role changes across multiple servers. The Log On…
DataKeeper Intent Log files on AWS Ephemeral Storage
DataKeeper Cluster Edition Technical Documentation » User Guide » DataKeeper Intent Log files on AWS Ephemeral Storage
DataKeeper systems that are running on AWS instances which are configured with local instance storage (i.e. ephemeral disks) can use the instance storage to store DataKeeper intent log files (i.e. bitmap files). It is important to be sure that when using AWS ephemeral…
DataKeeper Volume Not Available as Cluster Resource Type
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Known Issues and Workarounds » DataKeeper Volume Not Available as Cluster Resource Type
WSFC Server – The DataKeeper Volume is Not Available as a Cluster Resource Type After DataKeeper is Installed in a Microsoft WSFC Environment Error/Message The DataKeeper Volume is not available as a cluster resource type after DataKeeper is installed in a…
DataKeeper Failover Clustering Resource DLL (DataKeeperVolume) Message Catalog
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Message Catalogs » DataKeeper Failover Clustering Resource DLL (DataKeeperVolume) Message Catalog
Use Control F to search for a specific error code. Code Severity Message Cause/Action 17 Info DataKeeper Cluster Resource ‘Online’ operation for Volume ‘Y:’ was successful. 18 …
How to add a newly-created volume to DataKeeper
DataKeeper Cluster Edition Technical Documentation » Configuration » How to add a newly-created volume to DataKeeper
After a new volume has been created, formatted, and assigned a drive letter, run the following command from the command line in order to be able to start using the volume for mirror and job creation: From a CMD prompt: “%ExtMirrBase%\EMCMD” .…
Creation of iSCSI Virtual Disks
DataKeeper Cluster Edition Technical Documentation » User Guide » Using Microsoft iSCSI Target With DataKeeper on Windows 2012 » Creation of iSCSI Virtual Disks
Perform the following on the primary server, wherever the iSCSI Target server is online at the moment. From Server Manager, navigate to File and Storage Services and select iSCSI. Click on the link “To create an iSCSI virtual disk, start the New iSCSI Virtual Disk…
Installation of the iSCSI Target
DataKeeper Cluster Edition Technical Documentation » User Guide » Using Microsoft iSCSI Target With DataKeeper on Windows 2012 » Installation of the iSCSI Target
From the Server Manager menu, select “Add Roles and Features” from the “Manage” drop-down. Select the “Role-based or feature-based installation” option. From the list of servers presented, select the appropriate server. On the…
How to create a DK Replicated Volume that has Multiple Targets via CLI
DataKeeper Cluster Edition Technical Documentation » User Guide » Clustering » How to create a DK Replicated Volume that has Multiple Targets via CLI
The environment in this example looks like this: PRIMARY (10.0.2.100) – in AZ1 SECONDARY (10.0.3.100) – in AZ2 DR (10.0.1.10) – in a different Region *The Goals: • To create a synchronous mirror from PRIMARY to SECONDARY and an…
Reclaim Full Capacity of Target Drive
DataKeeper Cluster Edition Technical Documentation » FAQs » Reclaim Full Capacity of Target Drive
Question How do I reclaim the full capacity of my target drive when I no longer need it for mirroring? Answer The file system on the target drive is overlaid by SIOS DataKeeper, thereby making it smaller than the actual partition size. Although Disk Management…
DataKeeper Cannot be used as a Quorum Device for a Cluster
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Known Issues and Workarounds » DataKeeper Cannot be used as a Quorum Device for a Cluster
Question Can a DataKeeper drive be used for a quorum disk? Answer No, a DataKeeper drive cannot be used for a quorum disk. The quorum type is set to Node Majority if the number of nodes is odd (ex: 3-node cluster). The quorum type is set to Node and File Share…
Using DataKeeper Cluster Edition to Enable Multi-Site Hyper-V Clusters
DataKeeper Cluster Edition Technical Documentation » User Guide » Clustering » Using DataKeeper Cluster Edition to Enable Multi-Site Hyper-V Clusters
Prerequisite Familiarity with Microsoft Windows Server, Microsoft Windows Failover Cluster Server Management and Hyper-V Virtual Management procedures and commands is highly recommended. Note: DataKeeper ClusterCluster Edition does not support Cluster Shared Volumes;…
Disable “Automatically manage paging file size for all drives”
DataKeeper Cluster Edition Technical Documentation » Configuration » Disable “Automatically manage paging file size for all drives”
By default, Windows configures virtual memory so that page files are automatically created on volumes as the Operating System determines is best. This Virtual Memory setting is called “Automatically manage paging file size for all drives”. When this…
DataKeeper Does Not Support Lowercase Drive Letters as Mirror Endpoint for Jobs
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Known Issues and Workarounds » DataKeeper Does Not Support Lowercase Drive Letters as Mirror Endpoint for Jobs
Lowercase volume letters for jobs in Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ExtMirr\Parameters\Jobs is not compatible with DataKeeper. If the drive letters become lowercase, they will need to be manually changed to uppercase in the registry. If…
Deploy an Active Directory Domain Controller in Azure
DataKeeper Cluster Edition in a Cloud Environment » Configure a File Server Cluster in Azure Spanning Multiple Availability Zones(AZ) » Deploy an Active Directory Domain Controller in Azure
Deploy a Virtual Machine that will work as a Domain Controller for the cluster that is going to be deployed. This step can be skipped if there is a Domain Controller already configured. *This Virtual Machine running a Domain Controller should be in a different…
Extending a Traditional 2-Node WSFC Cluster to a Third Node via DataKeeper
DataKeeper Cluster Edition Technical Documentation » User Guide » Clustering » Extending a Traditional 2-Node WSFC Cluster to a Third Node via DataKeeper
When replicating from a WSFC 2-node cluster to a third node via DataKeeper, the following tasks are required: Replace the existing WSFC physical disk resource with a DataKeeper volume resource that supports data replication. Change the quorum type to Node…
Changing the Compression Level of an Existing Mirror
DataKeeper Cluster Edition Technical Documentation » User Guide » Working With Mirrors » Changing the Compression Level of an Existing Mirror
The compression level of the mirror is set during mirror creation and applies to that specific mirror only. To change the compression level of an existing the mirror, edit the properties of the mirror from within the DataKeeper GUI. Select the mirror and click on…
Safe Creation of a Shared-Storage Volume Resource
DataKeeper Cluster Edition Technical Documentation » User Guide » Configuring Mirrors » Safe Creation of a Shared-Storage Volume Resource
DataKeeper allows mirrors to be created on shared volumes where more than one system has access to the same physical storage. The shared volume can be on the source side of the mirror or on the target side. Note: Dynamic disks are not supported with Shared Storage…
Using SIOS DataKeeper Standard Edition To Provide Disaster Recovery For Hyper-V Virtual Machines
DataKeeper Cluster Edition Technical Documentation » User Guide » Using SIOS DataKeeper Standard Edition To Provide Disaster Recovery For Hyper-V Virtual Machines
Considerations When preparing a Hyper-V environment that spans subnets, subnetting may need to be taken into consideration for any applications that are running inside the virtual machine. Some applications “hard code” IP addresses into their…
Initial Synchronization of Data Across the LAN or WAN
DataKeeper Cluster Edition Technical Documentation » Configuration » WAN Considerations » Initial Synchronization of Data Across the LAN or WAN
When replicating large amounts of data over a WAN link, it is desirable to avoid full resynchronizations which can consume large amounts of network bandwidth and time. DataKeeper avoids almost all full resyncs by using its bitmap technology. However, the initial…
System Event Log – Create Mirror Failed in the GUI
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Known Issues and Workarounds » System Event Log – Create Mirror Failed in the GUI
Error/Message Create Mirror Failed in the GUI. Description This can result if a vmms.exe program is holding on to volume and preventing SIOS DataKeeper from locking it.
Clustering
DataKeeper Cluster Edition Technical Documentation » User Guide » Clustering
Running chkdsk on Cluster Volumes during Cluster Volume Online Creating a DataKeeper Volume Resource in WSFC Manual Creation of a Mirror in WSFC DataKeeper Volume Resource Health Check DataKeeper Volume Resource Private Properties Extending a Clustered DataKeeper…
User Interface – Shows Only One Side of the Mirror
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Known Issues and Workarounds » User Interface – Shows Only One Side of the Mirror
If the SIOS DataKeeper UI shows a volume as a source and its corresponding target as available or a volume as a target with the corresponding source volume as available, you can use the command line utility to force an update to the SIOS DataKeeper GUI or delete the…
FAQs
DataKeeper Cluster Edition Technical Documentation » FAQs
Refer to this section for answers to the most frequently asked questions about SIOS DataKeeper and SIOS DataKeeper Cluster Edition. ______________________________________________________________________________________________________________ Add a New Disk / DK…
Most Common DKCE Clustering Solutions
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Solutions » DKCE Common Solutions » Most Common DKCE Clustering Solutions
The following are the most commonly requested clustering related solutions. Perform a Health Check How do I add/register an existing DataKeeper Volume to a cluster? Why has my Role FAILED in WSFC (e.g. SQL, SAP, FileShare, Hyper-V, Generic App)? For…
Extending a Traditional 2-Node Cluster to a Shared-Replicated Configuration
DataKeeper Cluster Edition Technical Documentation » User Guide » Clustering » Extending a Traditional 2-Node Cluster to a Shared-Replicated Configuration
Add a Shared Node Using Windows Server 2008R2 or 2012 When using Windows Server 2008R2 or 2012, a 1×1 2-Node replicated cluster using DataKeeper Volumes can be extended to a 2×1 shared and replicated 3-Node cluster by using either of the following…
Deleting a Job
DataKeeper Cluster Edition Technical Documentation » User Guide » Working With Jobs » Deleting a Job
Select the job in the left Console Tree pane of the main DataKeeper window. You can select Delete Job from the Actions pane or right-click on the selected job and choose Delete Job from the menu that displays. Select Yes to delete the selected job and…
Configuration of Data Replication From a Cluster Node to External DR Site
DataKeeper Cluster Edition Technical Documentation » Configuration » Configuration of Data Replication From a Cluster Node to External DR Site
For more information, see Extending a clustered datakeeper volume to a node outside the cluster.
Resources cannot Failover after a Target NODE/SYSTEM has been replaced
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Known Issues and Workarounds » Resources cannot Failover after a Target NODE/SYSTEM has been replaced
Error message: Log Name: System Source: Microsoft-Windows-FailoverClustering Date: 2/12/2020 6:14:29 PM Event ID: 1205 Task Category: Resource Control Manager Level: Error Keywords: User: SYSTEM Computer: servername.FQDN Description The Cluster service failed to…
CHKDSK
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Restrictions » CHKDSK
If you must run CHKDSK on a volume that is being replicated by SIOS DataKeeper, it is recommended that you PAUSE the mirror before initiating the CHKDSK. After running CHKDSK, CONTINUE the mirror. A partial resync occurs (updating those writes generated by the CHKDSK)…
Solutions
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Solutions
- Cloud Environment - How to properly use AWS instance storage (ephemeral storage/disk) If SIOS AMIs are not being deployed on an AWS server, these disk initialization steps must be considered. This was introduced with Windows 2016 and continues in later…
Most Common DKCE Storage Solutions
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Solutions » DKCE Common Solutions » Most Common DKCE Storage Solutions
The following are the most commonly requested storage related solutions. Preparing Storage for DataKeeper Usage Preparing Storage for DataKeeper Usage Summary This video explains the procedure for creating/preparing storage for Datakeeper. It also addresses…
Known Issues and Workarounds
DataKeeper Cluster Edition Technical Documentation » DataKeeper Troubleshooting » Known Issues and Workarounds
Included below are known issues open against DataKeeper and DataKeeper Cluster Edition as well as possible workarounds and/or solutions. __________________________________________________________________________________________________________________ Access to…
Silent Installation
DataKeeper Cluster Edition Installation Guide » Installation » Silent Installation
!When creating a response file, ensure that ALL dialog boxes have been responded to, including the final dialog box specifying when the system should reboot. Not providing a response for all dialog boxes will result in a faulty response file. To resolve a faulty…
AWS Cross Region Support
DataKeeper Cluster Edition in a Cloud Environment » Deploying DataKeeper Cluster Edition in AWS » AWS Cross Region Support
Step By Step Configuring Amazon Ec2 For Business Critical Applications The diagram above generally shows an active/source node (in green) synchronously replicating to a passive node, both existing in the same region (Region A). Synchronous replication can also be…
Many-to-One
DataKeeper Cluster Edition Technical Documentation » User Guide » Getting Started » Many-to-One
This configuration involves multiple source servers replicating one (or more) volumes to the same target system. In this configuration, each volume being replicated to the target server must have a unique drive letter. Note: This is actually two One-to-One…