This cmdlet is used to create a new DataKeeper mirror. Mirrors created with this cmdlet will be visible in the DataKeeper SnapIn (Reports > Server Overview). If a job exists that includes information that matches this mirror (systems, IP Addresses, Volumes, and Sync Type), the mirror will be displayed in the DataKeeper SnapIn as part of that job.
| Parameter | Type | Required | Position | Notes |
|---|---|---|---|---|
| SourceIP | String | Yes | 0 | IP address on the source to be used for DataKeeper mirror data. |
| SourceVolume | String | Yes | 1 | The source volume to mirror. |
| TargetIP | String | Yes | 2 | IP address on the target to be used for DataKeeper mirror data. |
| TargetVolume | String | Yes | 3 | The target volume to become the mirror target. If not specified it will be the same volume indicated by the SourceVolume parameter. |
| SyncType | String | Yes | 4 | Valid options are:
Sync - A synchronous mirror Async - An asynchronous mirror |
| CreateFlags | uint | No | 5 | Optional arguments that specify behavior deviate from the norm. These can be OR'd together to create a set of options (add decimal values. Example: for option 1 + option 2, place a 3 in the command). 1. Create the mirror without doing a full resync operation. 2. Do not wait for the target side of the mirror to be created before returning. |
An integer value representing the status of the command. 0 means that the command succeeded, any other value is a Windows error code.
Example:
New-DataKeeperMirror -SourceIP 10.200.8.55 -SourceVolume E -TargetIP 10.200.8.56 -TargetVolume E -SyncType Async
New-DataKeeperMirror 10.200.8.55 E 10.200.8.56 E Async
|
|
NOTE: Disk sector size must match on both source and target volumes. See Sector Size for more information. |
© 2017 SIOS Technology Corp., the industry's leading provider of business continuity solutions, data replication for continuous data protection.