CREATEMIRROR

EMCMD <system> CREATEMIRROR <volume letter> <target system> <type> [options]

This command creates a mirror between two machines, using the same drive letter on each. The parameters are as follows:

<system>	This is the IP address of the source system (see Note below).
<volume letter>	This is the drive letter that is being mirrored. This will be both the source and target drive letter.
<target system>	This is the IP address of the target system (see Note below).
<type>	This is the type of mirror, where type is a single character: A - Create an Asynchronous Mirror S - Create a Synchronous Mirror
[options]	Optional arguments that specify behavior deviant from the norm. These can be OR'd together to create a set of options (add decimal values - for example, for option 1 + option 4, place a 5 in the command). They are: 1: Create the mirror without doing a full resync operation. 2: Do not wait for the target side of the mirror to be created before returning. 4: Create with boot-time restrictions in place - essentially treat the create as you would a mirror re-establishment as part of the boot process. This option will check to see if the remote system is already a source and fail the creation if it determines that it was a source.