The topic you requested could not be found.
Related topics are listed below.

Adding a Shared System

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Shared Volumes » Adding a Shared System

To add a shared system to either the source or target side of a mirror, you must be connected to that system. You can connect to the system prior to starting the Manage Shared Volumes dialog, or you can click Connect to Server from within the dialog. In either case,…

Removing a Shared System

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Shared Volumes » Removing a Shared System

To remove a shared system from either side of the mirror, bring up the Manage Shared Volumes dialog and uncheck the Include box for the system to be removed. When you click Done, the job will be updated so that the system is not part of the job. Warning: If a shared…

Managing Shared Volumes

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Shared Volumes » Managing Shared Volumes

Once your mirrors have been created, DataKeeper allows you to manage your shared volumes. By choosing Manage Shared Volumes from the DataKeeper GUI, you can add another system, which is sharing a mirrored volume, to a job. It also allows you to remove a shared system…

Installation – Shared Storage Systems

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Installation » Installation – Shared Storage Systems

On the Primary Server Power down the backup server so that there is no chance of simultaneous access to your shared storage. Use the Windows Disk Management tool to configure your disk resources and define the shared volumes that you want to use. (Be sure the…

Working With Shared Volumes

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Shared Volumes

Managing Shared Volumes Adding a Shared System Removing a Shared System

Creating Mirrors With Shared Volumes

SIOS DataKeeper for Windows Technical Documentation » User Guide » Configuring Mirrors » Creating Mirrors With Shared Volumes

In order to properly configure DataKeeper in a shared volume configuration, use the DataKeeper GUI to connect to all systems where the shared volumes are configured. When connected, the DataKeeper GUI uses hardware signatures to automatically detect which volumes are…

Switchover in an N-Shared x N-Shared Configuration

SIOS Protection Suite for Windows » Clustering » Switchover in an N-Shared x N-Shared Configuration

In a multi-shared storage environment between two sites (as shown in the diagram below), each server in each site has access to the storage being shared between the servers at that site. When a DataKeeper mirror is created, one server in each site will be designated…

N-Shared-Disk Replicated to Multiple N-Shared-Disk Targets

SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » N-Shared-Disk Replicated to Multiple N-Shared-Disk Targets

This is a complex configuration which combines the aspects of replicating a shared storage environment to multiple shared targets. Example: USE CASE Users who wish to provide the same level of availability in their DR site will deploy this…

N-Shared-Disk Replicated to N-Shared-Disk

SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » N-Shared-Disk Replicated to N-Shared-Disk

This configuration replicates data between sites where each site utilizes shared storage. Note that the number of systems in the Primary Site does not have to equal the number of systems in the Remote Site. Also note that only the Source Server has access to the…

N-Shared-Disk Replicated to One

SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » N-Shared-Disk Replicated to One

This configuration allows you to replicate the shared volume(s) of the primary site to a remote system across the network. This configuration is ideal for providing local failover within the Primary Site and disaster recovery protection should the entire Primary…

Performing Offline Maintenance On A Shared Disk

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Maintenance Tasks » Performing Offline Maintenance On A Shared Disk

When performing offline maintenance on a shared SCSI host adapter or a disk on a shared bus, you must stop LifeKeeper and power down all servers and shared disks. Perform these actions in the following order: Stop LifeKeeper. Use the Services tool to stop the…

Volume Locking for Shared SCSI Volumes

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Operator Tasks » Volume Locking for Shared SCSI Volumes

When you want to protect resources on shared SCSI disks, you partition the shared disk into logical volumes using the Windows Disk Management tool. SIOS Protection Suite can protect shared volumes by defining a volume resource instance. Each instance is assigned a…

Safe Creation of a Shared-Storage Volume Resource

SIOS DataKeeper for Windows Technical Documentation » User Guide » Configuring Mirrors » Safe Creation of a Shared-Storage Volume Resource

DataKeeper allows mirrors to be created on shared volumes where more than one system has access to the same physical storage. The shared volume can be on the source side of the mirror or on the target side. Note: Dynamic disks are not supported with Shared Storage…

Extending a Traditional 2-Node Cluster to a Shared-Replicated Configuration

SIOS Protection Suite for Windows » Clustering » Extending a Traditional 2-Node Cluster to a Shared-Replicated Configuration

Add a Shared Node Using Windows Server 2008R2 or 2012 When using Windows Server 2008R2 or 2012, a 1×1 2-Node replicated cluster using DataKeeper Volumes can be extended to a 2×1 shared and replicated 3-Node cluster by using either of the following…

LCD Directory Structure

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Advanced Topics » LCD Directory Structure

Major subdirectories under $LKROOT (by default, c:\LK): Admin. Scripts for SIOS Protection Suite core and Recovery Kits. Config. SIOS Protection Suite configuration files, including shared equivalencies. Bin. SIOS Protection Suite executable…

Recovering From a SIOS Protection Suite Server Failure in a 1 × 1 Configuration

SIOS Protection Suite for Windows » Troubleshooting » Recovering From a SIOS Protection Suite Server Failure in a 1 × 1 Configuration

If a server in your SIOS Protection Suite cluster experiences a failure that causes re-installation of the operating system (and thus SIOS Protection Suite), you will have to re-extend the resource hierarchies from each server in the cluster. If a server in the cluster…

Configuring Mirrors

SIOS DataKeeper for Windows Technical Documentation » User Guide » Configuring Mirrors

Creating a Mirror Creating Mirrors With Shared Volumes Safe Creation of a Shared-Storage Volume Resource Creating Mirrors With Multiple Targets Switchover and Failover with Multiple Targets

Getting Started

SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started

Choose Your Configuration DataKeeper can be utilized in a number of different configurations to facilitate a number of different functions including: Provide a second physical copy of your data Extend an existing WSFC cluster to a remote DR site Review the…

Document Content Location

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » IIS Configuration Definitions and Restrictions » Document Content Location

Shared and Replicated Content Storage If the content volume is on a shared or replicated volume, both Web sites must point to the same shared or replicated volume and folder. The primary and backup servers must contain the same content files for the active and standby…

Windows Server 2012 Default Information Missing During Mirror Creation

Windows Server 2012 Default Information Missing During Mirror Creation

Creating Mirrors with Multiple Targets The first issue is during mirror creation in a multi-target configuration. In the final step, the user is prompted for secondary relationship information. In previous OS versions, a default Source IP is provided on this…

Clustering

SIOS Protection Suite for Windows » Clustering

Running chkdsk on Cluster Volumes during Cluster Volume Online Creating a DataKeeper Volume Resource in WSFC Manual Creation of a Mirror in WSFC DataKeeper Volume Resource Health Check DataKeeper Volume Resource Private Properties Extending a Clustered DataKeeper…

Understand Manual Switchover Limitations in SQL Server Environment

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Hierarchy Administration » Understand Manual Switchover Limitations in SQL Server Environment

Any manual action requires that all users be logged off of the SQL Server resources. Local processes that have read-only access to volumes do not prevent removal of a resource from service but may cause a restore to fail when you try to switch back. Examples might be…

Additional Setup Tasks for Extended Configurations

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Installation » Additional Setup Tasks for Extended Configurations

If your configuration uses a shared storage device or you are using SIOS DataKeeper, you may choose a configuration that will be extended to a third (or more) server(s). Configure two systems following the steps given in Installing and Configuring SQL Server with…

DataKeeper Volume Resize

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Mirrors » DataKeeper Volume Resize

DataKeeper allows users to extend and shrink their DataKeeper volumes dynamically while retaining mirror settings. Once the resize is complete, a partial resync will be performed. Note: This resize procedure should be performed on only one volume at a time. !WARNING …

Operator Tasks

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Operator Tasks

This section covers more advanced tasks that require Operator permission such as bringing resources in and out of…

Create Hierarchy Failed

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Troubleshooting Tips » Create Hierarchy Failed

Suggestion Check the following: All volumes and communications resources (IP and/or LAN Manager) associated with the SID should already be under LifeKeeper protection. All the shared or replicated volumes are available to the primary server and all volumes are…

Switching Over a Mirror

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Jobs » Switching Over a Mirror

The Switchover Mirror function enables you to switch over all the mirrors in a job or just one of the mirrors in a job. A “mirror” includes all variants for mirrors such as standard single-target replication and complex geometries such as multi-target…

Maintaining a SIOS Protection Suite Protected System

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Maintenance Tasks » Maintaining a SIOS Protection Suite Protected System

When performing shutdown and maintenance on a SIOS Protection Suite-protected server, you must put that system’s resource hierarchies in-service on the backup server before performing maintenance. This process stops all activity for shared disks on the system needing…

Common Hardware Components

SIOS Protection Suite for Windows » Configuration » SIOS Protection Suite Configurations » Common Hardware Components

All SIOS Protection Suite configurations share these common components as illustrated in the diagram below: Server Groups. The basis for the fault resilience provided by SIOS Protection Suite is clustered Windows servers. The servers, also referred to as SIOS…

LCD Resource Types

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Advanced Topics » LCD Resource Types

The LCD is maintained in both shared memory and in the $LKROOT directory. As highlighted on the directory structure diagram, subsys contains application resource sets you can use to define your application interface: filesys – file system related resources…

Uninstalling SPS for Windows

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Maintenance Tasks » Uninstalling SPS for Windows

Before Removing LifeKeeper Included below are the requirements for removing LifeKeeper software. Move or stop applications. Before removing the software, verify that applications requiring SIOS Protection Suite protection are not on the server. Never remove…

System Grouping Arrangements

SIOS Protection Suite for Windows » Configuration » SIOS Protection Suite Configurations » System Grouping Arrangements

A resource hierarchy is defined on a cluster of SIOS Protection Suite servers. For a given hierarchy, each server is assigned a priority, with one (1) being the highest possible priority. The primary, or highest priority, server is the computer you want to use for the…

Bring In Service Failed

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Troubleshooting Tips » Bring In Service Failed

Suggestion Check to see if any other Oracle resource is already in service on the system you are trying to bring in service and/or that shared volumes can be accessed from this system. If additional time is required for the Oracle service to reach the running state,…

Maintenance Tasks

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Maintenance Tasks

The topics in this section cover the tasks necessary for maintaining SIOS Protection Suite. _____________________________________________________________________________________________________________________________________________________ Starting and Stopping…

Server 2012: Server Manager “File and Storage Services” Disk Status

Server 2012: Server Manager “File and Storage Services” Disk Status

Question Why are DataKeeper Volumes that are being used in a Microsoft Failover Cluster not shown by Server Manager as “Clustered”? Answer On Server 2012, the new Server Manager tool is capable of detecting if a complete “Disk” is being used by Failover…

LifeKeeper Configuration Database (LCD)

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Advanced Topics » LifeKeeper Configuration Database (LCD)

The LifeKeeper configuration database (LCD) maintains the object-oriented resource hierarchy information and stores recovery direction information for all resource types known to SIOS Protection Suite. The data is cached within system shared memory and stored in files…

Recovery Kit Requirements

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Recovery Kit Requirements

Before installing and configuring the LifeKeeper Oracle Recovery Kit, be sure that your configuration meets the following requirements: Operating System software. LifeKeeper supports the following versions of Windows operating systems: Windows Server 2008 R2 and…

WSFC 2012 New File Server Type Not Supported

WSFC 2012 New File Server Type Not Supported

Description Windows Server 2012 now offers two options for File Server Resources: File Server for General Use Scale-Out File Server for Application Data (NEW) The new option, “Scale-Out File Server for Application Data”, is not currently…

User Guide

SIOS DataKeeper for Windows Technical Documentation » User Guide

The topics in this section are designed to be a reference for you as you get started using SIOS DataKeeper, helping you identify the type of configuration you are interested in implementing and providing detailed instructions for effectively using your SIOS DataKeeper…

DataKeeper User Guide

SIOS Protection Suite for Windows » DataKeeper » DataKeeper User Guide

The topics in this section are designed to be a reference for you as you get started using SIOS DataKeeper, helping you identify the type of configuration you are interested in implementing and providing detailed instructions for effectively using your SIOS DataKeeper…

Recovery Operations

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » Testing Your IIS Resource Hierarchy » Recovery Operations

When the primary server fails, the LifeKeeper Microsoft IIS Recovery Kit software performs the following tasks: Brings the IIS resource hierarchy into service on the backup server by bringing In Service the IP address(s) on one of that server’s physical network…

IIS Configuration

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » IIS Configuration Definitions and Restrictions » IIS Configuration

The following configuration rules must be followed to ensure LifeKeeper protection: IIS sites that do not have IP addresses specified in the “IPAddress” field of the Properties or Bindings form cannot be protected. If using a shared or replicated…

WSFC 2012 Server Manager — DataKeeper “Disk” Not Shown as Clustered

WSFC 2012 Server Manager -- DataKeeper “Disk” Not Shown as Clustered

There are some inconsistencies in how cluster disks are shown in the “Disks” display under Server Manager > File and Storage Services > Volumes > Disks. The following screen shot shows an iSCSI Shared Disk and two DataKeeper Volumes in a cluster. There is…

SIOS DataKeeper Intent Log

SIOS DataKeeper for Windows Technical Documentation » Introduction » Understanding Replication » SIOS DataKeeper Intent Log

SIOS DataKeeper uses an intent log (also referred to as a bitmap file) to track changes made to the source, or to target volume during times that the target is unlocked. This log is a persistent record of write requests which have not yet been committed to both…

GETCONFIGURATION

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » GETCONFIGURATION

EMCMD GETCONFIGURATION This command retrieves and displays the net alert settings (also referred to as “volume attributes”) for the volume. The parameters are: This can be either the source or the target systems. The…

Installing and Configuring LifeKeeper with Oracle

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Installation » Installing and Configuring LifeKeeper with Oracle

The LifeKeeper with Oracle installation and configuration procedure differs slightly for replicated storage systems and shared stored systems. We have created separate sections in this document for each type of storage configuration in an effort to clarify the…

Additional Setup Tasks for Extended Configurations

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » PostgreSQL Server Installation » Additional Setup Tasks for Extended Configurations

If your configuration uses a shared storage device or you are using SIOS DataKeeper, you may choose a configuration that will be extended to a third (or more) server(s). If it has not already been done, configure two systems following the steps given in Installation…

DataKeeper Cluster Edition Quick Start Guide

DataKeeper Cluster Edition Quick Start Guide

This topic provides step-by-step instructions for installing and configuring DataKeeper Cluster Edition. The series of steps includes links into the documentation that describe each step in detail. Prerequisites and Installation Read the DataKeeper Cluster Edition…

SETCONFIGURATION

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » SETCONFIGURATION

EMCMD SETCONFIGURATION This command sets the net alert settings (also referred to as “volume attributes”) for the volume. The parameters are: This can be either the source or the target system. The drive letter of the…

Volume Shadow Copy (VSS)

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Operator Tasks » Volume Shadow Copy (VSS)

Using Volume Shadow Copy (VSS) with DataKeeper/SIOS Protection Suite Volumes On Windows 2008 R2, VSS Shadow Copy can be enabled for SIOS Protection Suite-protected (shared or replicated) volumes. However, the following guidelines apply: VSS snapshot images must not…

Resource Hierarchy for Oracle

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Resource Hierarchy for Oracle

The typical Oracle resource hierarchy consists of the following resources: Oracle Shared communication resource (IP or LAN Manager alias name) Volume(s) All Oracle data, log, and trace (core database) files for the protected SID are stored on shared or…

Active-Active Grouping

SIOS Protection Suite for Windows » Configuration » Active-Active Grouping

In an active/active group, all servers are active processors; they also serve as the backup server for resource hierarchies on other servers. For example, the configuration example below shows two active/active pairs of servers. Server 1 is processing AppA, but also…

Mirror Properties

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Mirrors » Mirror Properties

Select a job in the Job Summary pane and right-click to choose Mirror Properties. This dialog displays the following information about the job, source and target systems: Job Name State (current state of the job; for example, Active) Source…

Installation and Configuration – Adding PostgreSQL to an Existing LifeKeeper Configuration

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » PostgreSQL Server Installation » Installation and Configuration – Adding PostgreSQL to an Existing LifeKeeper Configuration

This section covers installation and configuration of the SIOS Protection Suite and PostgreSQL software when adding PostgreSQL to an existing LifeKeeper cluster. These steps must be followed in order. On the Primary Server: Use the Window Disk Management tool to…

Installation and Configuration Details – Adding LifeKeeper to an Existing PostgreSQL Configuration

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » PostgreSQL Server Installation » Installation and Configuration Details – Adding LifeKeeper to an Existing PostgreSQL Configuration

This section covers installation and configuration of the SIOS Protection Suite and PostgreSQL software when adding LifeKeeper to an existing PostgreSQL configuration. The Primary server is assumed to be the location of the active PostgreSQL database cluster that will…

IIS Configuration Considerations

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » Installation » IIS Configuration Considerations

LifeKeeper places certain restraints on your Internet server configurations. These restrictions will ensure that the standby web server/site can successfully and completely replace the active web server/site. Default Web Site or New Web Site The Default Web Site…

SQL Server Configuration Considerations

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Configuration Considerations

Before you install and configure your clusters, it is important to understand the concepts of Active/Standby configuration, and how multiple instances can be set up in a SQL configuration. SQL Configuration A configuration is Active/Standby when there is only one…

SQL Server Services

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Services

The SIOS Protection Suite Microsoft SQL Server Recovery Kit will monitor and protect the following services: SQL2008(R2), 2012, 2014 or 2016: Core Services Optional Services SQL Server (MSSQLSERVER) SQL Server Agent …

CHKDSK

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Restrictions » CHKDSK

Description If you must run CHKDSK on a volume that is being replicated by SIOS DataKeeper, it is recommended that you PAUSE the mirror before initiating the CHKDSK. After running CHKDSK, CONTINUE the mirror. A partial resync occurs (updating those writes generated…

Adding Microsoft SQL Server Volumes

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » SQL Server Hierarchy Administration » Adding Microsoft SQL Server Volumes

As your environment grows, you may need to add new Microsoft SQL Server databases on new shared or replicated volumes. You should perform the following tasks to add the new volumes to the SIOS Protection Suite hierarchy before administering the new databases within…

Using DKCE to Enable Multi-Site File Share Resources with Windows Server 2008R2 WSFC

SIOS Protection Suite for Windows » Clustering » Using DKCE to Enable Multi-Site File Share Resources with Windows Server 2008R2 WSFC

Use the following procedure to protect File Share resources using SIOS DataKeeper and Microsoft Failover Cluster (WSFC). *IMPORTANT NOTE: DataKeeper Cluster Edition registration with Failover Cluster is automatic and occurs 60 seconds after detecting a Failover…

Oracle Overview

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Overview

The LifeKeeper Oracle Recovery Kit provides the ability to concurrently run Oracle database instances on other servers, and to optionally place these instances under LifeKeeper protection. Such a configuration is known as Active/Active and allows LifeKeeper servers to…

LCD Configuration Data

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Advanced Topics » LCD Configuration Data

LCD stores the following related types of data: Dependency Information Resource Status Information Inter-Server Equivalency Information Dependency Information For each defined resource, SIOS Protection Suite maintains a list of dependencies and a list of…

Oracle Hierarchy Administration Guidelines

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Oracle Hierarchy Administration » Oracle Hierarchy Administration Guidelines

Follow these guidelines for administering your Oracle hierarchy: Access via protected communication paths. To ensure that users can access the Oracle SID, regardless of the physical system on which it is running, all remote access of the database should be done…

Hardware and Software Requirements

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » Installation » Hardware and Software Requirements

Before attempting to install or remove the SIOS Protection Suite Microsoft IIS Recovery Kit, be sure that your configuration meets the following requirements: Operating System software. SIOS Protection Suite supports the following versions of Windows operating…

Extending a Traditional 2-Node WSFC SQL Server Cluster to a Third Node via DataKeeper

SIOS Protection Suite for Windows » Clustering » Extending a Traditional 2-Node WSFC SQL Server Cluster to a Third Node via DataKeeper

When replicating from a WSFC SQL Server 2-node cluster to a third node via DataKeeper, the following tasks are required: Replace the existing WSFC physical disk resource with a DataKeeper volume resource that supports data replication. Change the quorum type to…

Identical Primary Backup Web Sites

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » IIS Configuration Definitions and Restrictions » Identical Primary Backup Web Sites

For each primary IIS site, you must create an identical backup IIS site on the other server. These two servers must be connected by a LifeKeeper heartbeat. In order for the primary and backup sites to be identical, the following criteria must be met: The site names…

CHKDSK Considerations

SIOS DataKeeper for Windows Technical Documentation » Administration » CHKDSK Considerations

If you must run CHKDSK on a volume that is being mirrored by SIOS DataKeeper, it is recommended that you first pause the mirror. After running CHKDSK, continue the mirror. A partial resync occurs (updating those writes generated by the CHKDSK) and mirroring will…

Extending a Traditional 2-Node WSFC Cluster to a Third Node via DataKeeper

SIOS Protection Suite for Windows » Clustering » Extending a Traditional 2-Node WSFC Cluster to a Third Node via DataKeeper

When replicating from a WSFC 2-node cluster to a third node via DataKeeper, the following tasks are required: Replace the existing WSFC physical disk resource with a DataKeeper volume resource that supports data replication. Change the quorum type to Node…

LifeKeeper Communications Manager (LCM)

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Advanced Topics » LifeKeeper Communications Manager (LCM)

The LifeKeeper Communication Manager (LCM) provides reliable communication between processes on one or more SIOS Protection Suite servers. This process can use redundant communication paths between systems so that failure of a single communication path does not cause…

Recovery Kit Requirements

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft SQL Server Recovery Kit Introduction » Recovery Kit Requirements

Before installing and configuring the SIOS Protection Suite Microsoft SQL Server Recovery Kit, be sure that your configuration meets the following requirements: SIOS Protection Suite supports the versions of Windows operating systems listed in the Operating System…

New-DataKeeperJob

SIOS DataKeeper for Windows Technical Documentation » Administration » Using DKPwrShell with SIOS DataKeeper » New-DataKeeperJob

This cmdlet is used to create a DataKeeper job consisting of two nodes. Jobs created using this cmdlet will be added to the DataKeeper SnapIn the next time it is loaded. Parameters Parameter Type Required Position Notes JobName …

Install and Configure Microsoft IIS on All Servers

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » Installation » Install and Configure Microsoft IIS on All Servers

The next step is to configure Microsoft IIS on all the servers in your cluster. Install and Configure Microsoft IIS Web or FTP Site To create a Web site or FTP site pair, you need to add a new site on each server and configure the pair to be identical, or you can…

SIOS DataKeeper Cluster Edition Introduction

DataKeeper Cluster Edition Technical Documentation » SIOS DataKeeper Cluster Edition Introduction

SIOS DataKeeper Overview DataKeeper with High Availability – Cluster Edition Overview SIOS DataKeeper is a highly optimized host-based replication solution which ensures your data is replicated as quickly and as efficiently as possible from your source server…

Using DataKeeper Cluster Edition to Enable Multi-Site Hyper-V Clusters

SIOS Protection Suite for Windows » Clustering » Using DataKeeper Cluster Edition to Enable Multi-Site Hyper-V Clusters

Prerequisite Familiarity with Microsoft Windows Server, Microsoft Windows Failover Cluster Server Management and Hyper-V Virtual Management procedures and commands is highly recommended. Note: DataKeeper ClusterCluster Edition does not support Cluster Shared Volumes;…

Relocation of Intent Log

SIOS DataKeeper for Windows Technical Documentation » Introduction » Understanding Replication » Relocation of Intent Log

To relocate the Intent Log (bitmap file), please perform the following on all servers involved: *LEAVE THE MIRROR IN THE MIRRORING STATE! Do not pause it and then move the bitmap file. If you have more than one DataKeeper mirror, move all mirrors to a single system…

Hyper-V Host Cluster Error

Hyper-V Host Cluster Error

Failover Cluster Error After Changing Virtual Machine Configuration While VM Is Clustered Description If Failover Cluster Manager is used to modify the VM configuration while the VM is clustered such as adding a Network Interface to the VM, “Refresh Virtual…

Add-DataKeeperJobPair

SIOS DataKeeper for Windows Technical Documentation » Administration » Using DKPwrShell with SIOS DataKeeper » Add-DataKeeperJobPair

This cmdlet will add a node pair to an existing DataKeeper Job. It is used to expand the nodes and volumes contained within an existing job. For example, if a job exists for a volume between nodes A and B, and you want to add node C, run AddDataKeeperJobPair…

Active-Standby Grouping

SIOS Protection Suite for Windows » Configuration » Active-Standby Grouping

In an active/standby group, the primary server is processing, and the back-up servers are standing by in case of a failure on the primary server. The standby systems can be smaller, lower-performance systems, but they must have the processing capability to assure…

Creating and Protecting Additional PostgreSQL Database Clusters

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » PostgreSQL Server Hierarchy Administration » Creating and Protecting Additional PostgreSQL Database Clusters

As your environment grows, you may need to add new PostgreSQL Server database clusters on existing or new shared or replicated volumes. To add and protect a new database cluster and the associated volume follow these steps: Create the volume resource. On the server…

Install and Configure SMTP Virtual Server

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Microsoft Internet Information Services Recovery Kit Introduction » Installation » Install and Configure SMTP Virtual Server

Follow the steps below to create an SMTP Virtual Server. You need to add a new virtual server on each system and configure the pair to be identical. Use the LifeKeeper GUI to bring the switchable IP address and protected volume, if any, in-service on the primary…

CHANGEMIRRORENDPOINTS

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » CHANGEMIRRORENDPOINTS

EMCMD CHANGEMIRRORENDPOINTS This command is used to change the replication IP addresses within systems that are already part of a DataKeeper job for the given volume. Note: This command supports changing the endpoints of a mirrored volume that is configured on 3…

Extending a Clustered DataKeeper Volume to a Node Outside the Cluster

SIOS Protection Suite for Windows » Clustering » Extending a Clustered DataKeeper Volume to a Node Outside the Cluster

DataKeeper Volume cluster resources can be extended to a DR Node for Disaster Recovery purposes. In the event of a complete failure of all systems in the cluster, data will be accessible on the DR Node (referred to as the “DR Node”). Here you will find instructions…

DataKeeper Volume Resource Private Properties

SIOS Protection Suite for Windows » Clustering » DataKeeper Volume Resource Private Properties

A DataKeeper Volume resource includes several private properties that are used by DataKeeper Cluster Edition. Among these properties are: VolumeLetter (REG_SZ) – the volume letter that is replicated by DataKeeper and associated with this DataKeeper Volume…

DataKeeper Cluster Edition Release Notes

DataKeeper Cluster Edition Release Notes

SIOS DataKeeper Cluster Edition Release Notes Version 8.6.2 (Version 8 Update 6 Maintenance 2) Important!! Read This Document Before Attempting To Install Or Use This Product! This document contains last minute information that must be considered before, during…

Server Configuration Considerations

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite PostgreSQL Server Recovery Kit Introduction » Server Configuration Considerations

PostgreSQL Server Configuration Considerations Before you install and configure your PostgreSQL database clusters, it is important to understand how to configure them. It is also important to understand the concepts of Active/Standby and Active/Active configurations,…

Taking Volume Resources In and Out Of Service

SIOS Protection Suite for Windows » SIOS Protection Suite for Windows User Guide » Operator Tasks » Taking Volume Resources In and Out Of Service

Some background processes such as virus scanners and Windows Services will try to access a shared volume for write access. These processes may be required to run applications and cannot be arbitrarily turned off for long periods of time. In most cases, these…

Installing Oracle

SIOS Protection Suite for Windows » Application Recovery Kits » SIOS Protection Suite Oracle Recovery Kit Introduction » Installation » Installing Oracle

Once you have installed LifeKeeper and configured the volume and communication resources, you are ready to install Oracle to the protected volume(s). Oracle 12c Installation: Oracle12c introduces some new installation options. The following options for software and…

Deploying DataKeeper Cluster Edition in Azure

Deploying DataKeeper Cluster Edition in Azure

DEPLOYING MICROSOFT SQL SERVER 2014 FAILOVER CLUSTERS IN AZURE RESOURCE MANAGER (ARM) Before beginning, make sure you read the DataKeeper Cluster Edition Release Notes for the latest information. It is highly recommended that you read and understand the DataKeeper…

DataKeeper Target Snapshot

SIOS DataKeeper for Windows Technical Documentation » User Guide » DataKeeper Target Snapshot

Overview DataKeeper’s target snapshot feature, integrated with both DataKeeper and DataKeeper Cluster Edition, is the process of creating point in time copies of replicated volumes allowing access to data on a standby cluster node without interrupting data…