The topic you requested could not be found.
Related topics are listed below.

Windows Server 2012 iSCSI Target Role Does Not Support Dynamic Disks

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Windows Server 2012 Specific Issues » Windows Server 2012 iSCSI Target Role Does Not Support Dynamic Disks

Description The iSCSI Target Role only supports DataKeeper Volumes that are mirrors of Simple Volumes placed on Basic Disks. If any of your mirrors are using volumes such as Striped or Spanned volumes on a Dynamic Disk on either the source or target system, then you…

Using DKCE to Enable Multi-Site File Share Resources with Windows Server 2008R2 WSFC

NO TOC » SIOS Protection Suite for Windows » Clustering » Using DKCE to Enable Multi-Site File Share Resources with Windows Server 2008R2 WSFC

Use the following procedure to protect File Share resources using SIOS DataKeeper and Microsoft Failover Cluster (WSFC). *IMPORTANT NOTE: DataKeeper Cluster Edition registration with Failover Cluster is automatic and occurs 60 seconds after detecting a Failover…

Windows Server 2012 Specific Issues

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Windows Server 2012 Specific Issues

For issues related to Windows Server 2012, see the following topics: __________________________________________________________________________________________________________________ Windows Server 2012 MMC Snap-in Crash Windows Server 2012 iSCSI Target Role Does…

Creating Other Server Resource in WSFC

NO TOC » SIOS Protection Suite for Windows » Clustering » Creating Other Server Resource in WSFC

When creating an Other Server resource in WSFC, you will be prompted for a storage resource (DataKeeper resource) twice. You will check the first one, but do not need to check the second dialog. Click the “checkbox” for the first dialog “Select…

Windows Server 2012 NIC Teaming Issue

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Windows Server 2012 Specific Issues » Windows Server 2012 NIC Teaming Issue

If you use the NIC Teaming feature of Windows Server 2012, Windows 2012 will report only one adapter MAC address for the license. If you have many underlying adapters, the MAC address will arbitrarily change and Windows may pick one of the adapters that may no longer…

Windows Server 2012 MMC Snap-in Crash

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Windows Server 2012 Specific Issues » Windows Server 2012 MMC Snap-in Crash

Description When using the DataKeeper user interface (MMC Snap-in) on Windows Server 2012, the mmc.exe process may crash unexpectedly due to an internal .Net or Windows Presentation Foundation (WPF) issue. The error may show up on the screen and/or the event…

Installing and Using DataKeeper Cluster Edition on Windows Server 2008 R2 / 2012 Core Platforms

NO TOC » SIOS Protection Suite for Windows » Clustering » Installing and Using DataKeeper Cluster Edition on Windows Server 2008 R2 / 2012 Core Platforms

Prepare the servers. Install Windows Server 2008 R2/2012 Core on two servers, configure IP, join a domain, configure firewall for remote administration, configure the server for remote access and install the Failover Cluster feature. Server Core Installation…

Change Mirror Type

SIOS DataKeeper for Windows Technical Documentation » FAQs » Change Mirror Type

Question Can you change the mirror type of an existing mirror from Synchronous to Asynchronous or vice-versa? Answer Yes, you can change the mirror type using the EMCMD CHANGEMIRRORTYPE command.

Setup of iSCSI Initiator on Windows 2012

SIOS DataKeeper for Windows Technical Documentation » User Guide » Using Microsoft iSCSI Target With DataKeeper on Windows 2012 » Setup of iSCSI Initiator on Windows 2012

Once the virtual disks/targets are created, each of the cluster servers must initiate a connection to them via Microsoft’s iSCSI Initiator. From “Administrator Tools” in “Server Manager”, start “iSCSI Initiator”. Select the “Targets” tab and…

Bitlocker Does Not Support DataKeeper

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Restrictions » Bitlocker Does Not Support DataKeeper

According to Microsoft, Bitlocker is not supported to work with Software RAID configurations. Since DataKeeper is essentially a software RAID 1, Microsoft does not support Bitlocker working with DataKeeper. Note: EFS (Encrypting File System) and TDE (Transparent Disk…

Using Microsoft iSCSI Target With DataKeeper on Windows 2012

SIOS DataKeeper for Windows Technical Documentation » User Guide » Using Microsoft iSCSI Target With DataKeeper on Windows 2012

The following topics will guide you in setting up Microsoft iSCSI Target with DataKeeper via the user interface. *NOTE: This configuration is not supported in a VMware ESX environment. …

New-DataKeeperMirror

SIOS DataKeeper for Windows Technical Documentation » Administration » Using DKPwrShell with SIOS DataKeeper » New-DataKeeperMirror

This cmdlet is used to create a new DataKeeper mirror. Mirrors created with this cmdlet will be visible in the DataKeeper SnapIn (Reports > Server Overview). If a job exists that includes information that matches this mirror (systems, IP Addresses, Volumes, and Sync…

New-DataKeeperJob

SIOS DataKeeper for Windows Technical Documentation » Administration » Using DKPwrShell with SIOS DataKeeper » New-DataKeeperJob

This cmdlet is used to create a DataKeeper job consisting of two nodes. Jobs created using this cmdlet will be added to the DataKeeper SnapIn the next time it is loaded. Parameters Parameter Type Required Position Notes JobName …

Primary Server Shutdown

SIOS DataKeeper for Windows Technical Documentation » Administration » Primary Server Shutdown

On a graceful shutdown of the source server, all pending writes to the target are completed. This ensures that all data is present on the target system. On an unexpected source server failure, the Intent Log feature eliminates the need to do a full resync after the…

Disconnecting from a Server

SIOS DataKeeper for Windows Technical Documentation » User Guide » Setup » Disconnecting from a Server

Use this dialog to disconnect from a server. You may use this option if you no longer wish to view the server in the Administration Window. From the list of servers, select the server(s) that you wish to disconnect from and click Disconnect.

Connecting to a Server

SIOS DataKeeper for Windows Technical Documentation » User Guide » Setup » Connecting to a Server

Use this dialog to connect to the server of your choice. You may enter the IP address, system NetBIOS name or the full system domain name for the server. Click Connect to select it.

Secondary Server Failures

SIOS DataKeeper for Windows Technical Documentation » Administration » Secondary Server Failures

In the event there is a failure affecting the secondary (target) system, the affected mirror is marked Paused. It is necessary to correct the condition that caused the secondary to fail and then resync the volumes. There are no write attempts made to the target after…

Server Login Accounts and Passwords Must Be Same on Each Server in the Cluster

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Server Login Accounts and Passwords Must Be Same on Each Server in the Cluster

The DataKeeper GUI cannot connect to the target server in a cluster if server Login Accounts and Passwords are different on each server. Error Message An Error Code 1326 will appear in the Application log (Note: The Error Code may also be a 2 with Event ID…

DataKeeper Cluster Edition Release Notes

NO TOC » DataKeeper Cluster Edition Release Notes

SIOS DataKeeper Cluster Edition Release Notes Version 8.6.2 (Version 8 Update 6 Maintenance 2) Important!! Read This Document Before Attempting To Install Or Use This Product! This document contains last minute information that must be considered before, during…

Extending a Traditional 2-Node Cluster to a Shared-Replicated Configuration

NO TOC » SIOS Protection Suite for Windows » Clustering » Extending a Traditional 2-Node Cluster to a Shared-Replicated Configuration

Add a Shared Node Using Windows Server 2008R2 or 2012 When using Windows Server 2008R2 or 2012, a 1×1 2-Node replicated cluster using DataKeeper Volumes can be extended to a 2×1 shared and replicated 3-Node cluster by using either of the following…

Using DataKeeper Cluster Edition to Enable Multi-Site Hyper-V Clusters

NO TOC » SIOS Protection Suite for Windows » Clustering » Using DataKeeper Cluster Edition to Enable Multi-Site Hyper-V Clusters

Prerequisite Familiarity with Microsoft Windows Server, Microsoft Windows Failover Cluster Server Management and Hyper-V Virtual Management procedures and commands is highly recommended. Note: DataKeeper ClusterCluster Edition does not support Cluster Shared Volumes;…

Known Issues and Workarounds

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds

Included below are known issues open against DataKeeper as well as possible workarounds and/or solutions. __________________________________________________________________________________________________________________ Access to Designated Volume Denied Failed to…

Switchover in an N-Shared x N-Shared Configuration

NO TOC » SIOS Protection Suite for Windows » Clustering » Switchover in an N-Shared x N-Shared Configuration

In a multi-shared storage environment between two sites (as shown in the diagram below), each server in each site has access to the storage being shared between the servers at that site. When a DataKeeper mirror is created, one server in each site will be designated…

Troubleshooting

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting

The topics in this section contain important information about known issues and restrictions offering possible workarounds and/or solutions. ________________________________________________________________________________________________________________ Known Issues…

DataKeeper Target Snapshot

SIOS DataKeeper for Windows Technical Documentation » User Guide » DataKeeper Target Snapshot

Overview DataKeeper’s target snapshot feature, integrated with both DataKeeper and DataKeeper Cluster Edition, is the process of creating point in time copies of replicated volumes allowing access to data on a standby cluster node without interrupting data…

DKCE Support Matrix

NO TOC » DKCE Support Matrix

Server Components Supported Operating System v8.0.0 v8.0.1 v8.1.0 v8.2.0 v8.2.1 v8.3.0 v8.4.0 v8.5.0 v8.5.1 v8.6.0 v8.6.1 Note: The operating system versions listed…

Firewall Configurations

SIOS DataKeeper for Windows Technical Documentation » Configuration » Firewall Configurations

SIOS DataKeeper cannot function properly if the firewall settings for the source and target machines are not configured correctly. This means you will need to configure a rule for inbound and outbound connections on each server running SIOS DataKeeper as well as any…

Performance Monitor Counters

SIOS DataKeeper for Windows Technical Documentation » Introduction » Understanding Replication » Performance Monitor Counters

SIOS DataKeeper provides counters that extend Performance Monitor with statistics about the status of mirroring on volumes. The counters are installed during the full installation of SIOS DataKeeper software. To access the counters, do the following: On a…

Upgrading SIOS DataKeeper Cluster Edition

NO TOC » DataKeeper Cluster Edition Installation Guide » Upgrading SIOS DataKeeper Cluster Edition

Upgrading DataKeeper Cluster Edition from previous versions of DataKeeper Cluster Edition is very straightforward. Simply run the installation process outlined below on all systems. The upgrade process stops the DataKeeper Service, copies the new files to the…

Creation of iSCSI Virtual Disks

SIOS DataKeeper for Windows Technical Documentation » User Guide » Using Microsoft iSCSI Target With DataKeeper on Windows 2012 » Creation of iSCSI Virtual Disks

Perform the following on the primary server, wherever the iSCSI Target server is online at the moment. From Server Manager, navigate to File and Storage Services and select iSCSI. Click on the link “To create an iSCSI virtual disk, start the New iSCSI Virtual Disk…

Switching Over a Mirror

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Jobs » Switching Over a Mirror

The Switchover Mirror function enables you to switch over all the mirrors in a job or just one of the mirrors in a job. A “mirror” includes all variants for mirrors such as standard single-target replication and complex geometries such as multi-target…

Creating a Mirror

SIOS DataKeeper for Windows Technical Documentation » User Guide » Configuring Mirrors » Creating a Mirror

Before creating a mirror, ensure the following: You have created a job to hold the mirror. The volume on both the source and target systems must be of the NTFS file system type. The target volume must be greater than or equal to the size of the source…

Sector Size

SIOS DataKeeper for Windows Technical Documentation » Configuration » Sector Size

Beginning with DataKeeper Version 7.2.1, disks with sector size not equal to 512 bytes are supported. However, DataKeeper requires that the mirror source volume be configured on disk(s) whose sector size is the same as the disk(s) where the mirror target is configured.…

Mirror Creation and Cluster Configuration

SIOS DataKeeper for Windows Technical Documentation » User Guide » Using Microsoft iSCSI Target With DataKeeper on Windows 2012 » Mirror Creation and Cluster Configuration

Create your DataKeeper volumes and your cluster. See Creating a DataKeeper Volume Resource in WSFC for reference. *IMPORTANT: The iSCSI Target Role only supports DataKeeper Volumes that are mirrors of Simple Volumes placed on Basic Disks. If any of your mirrors are…

Registry Entries

SIOS DataKeeper for Windows Technical Documentation » Administration » Registry Entries

The following registry entries are associated with the SIOS DataKeeper service or driver and can be viewed using Regedt32. The first section contains entries that may be modified; the second section contains entries that are for viewing only and should not be…

N-Shared-Disk Replicated to One

SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » N-Shared-Disk Replicated to One

This configuration allows you to replicate the shared volume(s) of the primary site to a remote system across the network. This configuration is ideal for providing local failover within the Primary Site and disaster recovery protection should the entire Primary…

Licensing

NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite Installation Guide » Installing SIOS Protection Suite » Licensing

Obtaining and Installing the License DataKeeper Cluster Edition requires a unique license for each server. The license is a run-time license which means that you can install it without the license, but the license must be installed before you can successfully start…

Non-mirrored Volume Resource

NO TOC » SIOS Protection Suite for Windows » Clustering » Non-mirrored Volume Resource

A non-mirrored volume resource is a DataKeeper resource where no data is replicated to any node in the cluster. This resource type should only be used where the data is temporary and/or non-critical such as MS SQL Server tempdb space. In this case, when MS SQL restarts…

Switchover and Failover with Multiple Targets

SIOS DataKeeper for Windows Technical Documentation » User Guide » Configuring Mirrors » Switchover and Failover with Multiple Targets

In a multiple target configuration, it is important to understand how DataKeeper mirrors will work in the following scenarios: Manual switchover to a target server Source server failure followed by a manual switchover to a target server Example: In the…

CHANGEMIRRORTYPE

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » CHANGEMIRRORTYPE

EMCMD CHANGEMIRRORTYPE This command is used to change the mirror type of a mirror that is part of a DataKeeper job. Refer to the examples below. See Synchronous and Asynchronous Mirroring for information about the supported DataKeeper mirror types. …

DataKeeper Components

SIOS DataKeeper for Windows Technical Documentation » Introduction » DataKeeper Components

SIOS DataKeeper for Windows is comprised of the following components: DataKeeper Driver (ExtMirr.sys) – The DataKeeper Driver is a kernel mode driver and is responsible for all mirroring activity between the mirror endpoints. DataKeeper Service…

Components

NO TOC » DataKeeper Cluster Edition Technical Documentation » SIOS DataKeeper Cluster Edition Introduction » Components

DataKeeper Components SIOS DataKeeper for Windows is comprised of the following components: DataKeeper Driver (ExtMirr.sys) – The DataKeeper Driver is a kernel mode driver and is responsible for all mirroring activity between the mirror…

DataKeeper Service Log On ID and Password Selection

SIOS DataKeeper for Windows Technical Documentation » Configuration » DataKeeper Service Log On ID and Password Selection

During a new DataKeeper installation setup, the user will be prompted for a DataKeeper Service Log On ID and Password. The DataKeeper Service uses authenticated connections to perform volume switchovers and make mirror role changes across multiple servers. The Log On…

DataKeeper Service Log On ID and Password Selection

SIOS DataKeeper for Windows Technical Documentation » Introduction » DataKeeper Components » DataKeeper Service Log On ID and Password Selection

During a new DataKeeper installation setup, the user will be prompted for a DataKeeper Service Log On ID and Password. The DataKeeper Service uses authenticated connections to perform volume switchovers and make mirror role changes across multiple servers. The Log On…

Using SIOS DataKeeper Standard Edition To Provide Disaster Recovery For Hyper-V Virtual Machines

SIOS DataKeeper for Windows Technical Documentation » User Guide » Using SIOS DataKeeper Standard Edition To Provide Disaster Recovery For Hyper-V Virtual Machines

Considerations When preparing a Hyper-V environment that spans subnets, subnetting may need to be taken into consideration for any applications that are running inside the virtual machine. Some applications “hard code” IP addresses into their…

DataKeeper User Guide

NO TOC » SIOS Protection Suite for Windows » DataKeeper » DataKeeper User Guide

The topics in this section are designed to be a reference for you as you get started using SIOS DataKeeper, helping you identify the type of configuration you are interested in implementing and providing detailed instructions for effectively using your SIOS DataKeeper…

User Guide

SIOS DataKeeper for Windows Technical Documentation » User Guide

The topics in this section are designed to be a reference for you as you get started using SIOS DataKeeper, helping you identify the type of configuration you are interested in implementing and providing detailed instructions for effectively using your SIOS DataKeeper…

SIOS DataKeeper Cluster Edition Introduction

NO TOC » DataKeeper Cluster Edition Technical Documentation » SIOS DataKeeper Cluster Edition Introduction

SIOS DataKeeper Overview DataKeeper with High Availability – Cluster Edition Overview SIOS DataKeeper is a highly optimized host-based replication solution which ensures your data is replicated as quickly and as efficiently as possible from your source server…

Uninstalling SIOS DataKeeper Cluster Edition

NO TOC » DataKeeper Cluster Edition Installation Guide » Uninstalling SIOS DataKeeper Cluster Edition

Before Removing DataKeeper If planning to uninstall DataKeeper and reinstall a previous version, all jobs/mirrors must be deleted on each node prior to uninstalling. These will need to be recreated once software is reinstalled. Uninstall DataKeeper Cluster…

Installation of the iSCSI Target

SIOS DataKeeper for Windows Technical Documentation » User Guide » Using Microsoft iSCSI Target With DataKeeper on Windows 2012 » Installation of the iSCSI Target

From the Server Manager menu, select “Add Roles and Features” from the “Manage” drop-down. Select the “Role-based or feature-based installation” option. From the list of servers presented, select the appropriate server. On the…

Relocation of Intent Log

SIOS DataKeeper for Windows Technical Documentation » Introduction » Understanding Replication » Relocation of Intent Log

To relocate the Intent Log (bitmap file), please perform the following on all servers involved: *LEAVE THE MIRROR IN THE MIRRORING STATE! Do not pause it and then move the bitmap file. If you have more than one DataKeeper mirror, move all mirrors to a single system…

Using Disk Management

SIOS DataKeeper for Windows Technical Documentation » Administration » Using Disk Management

When using the Windows Disk Management utility to access SIOS DataKeeper volumes, please note the following: Using Disk Management to delete partitions that are being mirrored is not supported. Deleting a partition that is part of a SIOS DataKeeper mirror will yield…

Disk-to-Disk

SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » Disk-to-Disk

This is a simple one server, two disks configuration, mirroring Volume X on Server A to Volume Y on Server A. The volumes that are used for Disk-to-Disk replication can’t also be configured to replicate to another system. *Disk to Disk does not support mirrors…

CHKDSK Considerations

SIOS DataKeeper for Windows Technical Documentation » Administration » CHKDSK Considerations

If you must run CHKDSK on a volume that is being mirrored by SIOS DataKeeper, it is recommended that you first pause the mirror. After running CHKDSK, continue the mirror. A partial resync occurs (updating those writes generated by the CHKDSK) and mirroring will…

DKHEALTHCHECK

SIOS DataKeeper for Windows Technical Documentation » Administration » DKHEALTHCHECK

DKHealthCheck.exe, found in the \DKTools directory, is a tool that can provide basic mirror status and problem detection of mirror issues. SIOS Support may request that you run this tool as part of the Support process. Note: DKHEALTHCHECK output is captured by…

DataKeeper Volume Resize

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Mirrors » DataKeeper Volume Resize

DataKeeper allows users to extend and shrink their DataKeeper volumes dynamically while retaining mirror settings. Once the resize is complete, a partial resync will be performed. Note: This resize procedure should be performed on only one volume at a time. !WARNING …

Network Disconnect

SIOS DataKeeper for Windows Technical Documentation » FAQs » Network Disconnect

Scenario #1 In a 2-Node, non-clustering configuration (1×1) replicating a 100TB volume between Source server and Target server over a WAN connection, the network goes down for twenty minutes. Question In this scenario, what would happen to the Mirror State with…

Setting Up SIOS DataKeeper

SIOS DataKeeper for Windows Technical Documentation » User Guide » Setup » Setting Up SIOS DataKeeper

Setting Up SIOS DataKeeper Follow these steps to start using SIOS DataKeeper: Connect to the servers you wish to configure for replication. You can select Connect to Server from the Action pull down menu, right-click on the job folder in the left panel tree…

Setup

SIOS DataKeeper for Windows Technical Documentation » User Guide » Setup

Setting Up SIOS DataKeeper Follow these steps to start using SIOS DataKeeper: Connect to the servers you wish to configure for replication. You can select Connect to Server from the Action pull down menu, right-click on the job folder in the left panel tree…

Directory for Bitmap Must Be Created Prior to Relocation

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Restrictions » Directory for Bitmap Must Be Created Prior to Relocation

Description If you choose to relocate the bitmap file from the default location (%EXTMIRRBASE%\Bitmaps), you must first create the new directory before changing the location in the registry and rebooting the system.

Setting Up SIOS DataKeeper

NO TOC » SIOS Protection Suite for Windows » DataKeeper » Setting Up SIOS DataKeeper

Follow these steps to start using SIOS DataKeeper: Connect to the servers you wish to configure for replication. You can select Connect to Server from the Action pull down menu, right-click on the job folder in the left panel tree display and select Connect to…

Read and Write Operations

SIOS DataKeeper for Windows Technical Documentation » Introduction » Understanding Replication » Read and Write Operations

After the volume mirror is created and the two drives on the primary and secondary servers are synchronized, the following events occur: The system locks out all user access to the target volume; reads and writes are not allowed to the target volume. The source…

N-Shared-Disk Replicated to N-Shared-Disk

SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » N-Shared-Disk Replicated to N-Shared-Disk

This configuration replicates data between sites where each site utilizes shared storage. Note that the number of systems in the Primary Site does not have to equal the number of systems in the Remote Site. Also note that only the Source Server has access to the…

High-Speed Storage Best Practices

SIOS DataKeeper for Windows Technical Documentation » Configuration » High-Speed Storage Best Practices

Configure Bitmaps If the DataKeeper default bitmap location (%ExtMirrBase%\Bitmaps) is not located on high-speed storage, you should move the bitmaps to a high-speed storage device in order to eliminate I/O bottlenecks with bitmap access. To do this, allocate a small…

Creating Mirrors With Shared Volumes

SIOS DataKeeper for Windows Technical Documentation » User Guide » Configuring Mirrors » Creating Mirrors With Shared Volumes

In order to properly configure DataKeeper in a shared volume configuration, use the DataKeeper GUI to connect to all systems where the shared volumes are configured. When connected, the DataKeeper GUI uses hardware signatures to automatically detect which volumes are…

Initial Synchronization of Data Across the LAN or WAN

SIOS DataKeeper for Windows Technical Documentation » Configuration » WAN Considerations » Initial Synchronization of Data Across the LAN or WAN

When replicating large amounts of data over a WAN link, it is desirable to avoid full resynchronizations which can consume large amounts of network bandwidth and time. DataKeeper avoids almost all full resyncs by using its bitmap technology. However, the initial…

SIOS DataKeeper for Windows Quick Start Guide

SIOS DataKeeper for Windows Quick Start Guide

This topic provides step-by-step instructions for installing and configuring DataKeeper Standard Edition. The series of steps includes links into the documentation that describe each step in detail. Prerequisites and Installation Read the SIOS Protection Suite for…

Unextending a Hierarchy

NO TOC » SIOS Protection Suite for Windows » Administration » Working With Resource Hierarchies » Unextending a Hierarchy

The Unextend Resource Hierarchy option removes a complete hierarchy, including all of its resources, from a single server. This is different than the Delete Resource Hierarchy selection which removes a hierarchy from all servers. When using Unextend Resource…

Adding a Shared System

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Shared Volumes » Adding a Shared System

To add a shared system to either the source or target side of a mirror, you must be connected to that system. You can connect to the system prior to starting the Manage Shared Volumes dialog, or you can click Connect to Server from within the dialog. In either case,…

Mirror Properties

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Mirrors » Mirror Properties

Select a job in the Job Summary pane and right-click to choose Mirror Properties. This dialog displays the following information about the job, source and target systems: Job Name State (current state of the job; for example, Active) Source…

Creating a Job

SIOS DataKeeper for Windows Technical Documentation » User Guide » Setup » Creating a Job

If not already connected, connect to the server where you want to create a job. From the right Actions pane, select Create Job. The Job Wizard will prompt you for a Job Name and Description. Enter the appropriate information and select Create Job to…

Split-Brain FAQs

SIOS DataKeeper for Windows Technical Documentation » FAQs » Split-Brain FAQs

Scenario I am using DataKeeper in a non-cluster environment. I am mirroring from Server1 at one site to Server2 at a second site. Communication is broken due to site-to-site VPN, and I need to fail over from Server1 to Server2. I cannot access Server1 from anywhere.…

DKSUPPORT

SIOS DataKeeper for Windows Technical Documentation » Administration » DKSUPPORT

DKSUPPORT .cmd, found in the \SUPPORT directory, is used to collect important configuration information and event log files and put them in a zip file. SIOS Support Engineers will commonly request this zip file as part of the support process. To run this utility,…

Getting Started

SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started

Choose Your Configuration DataKeeper can be utilized in a number of different configurations to facilitate a number of different functions including: Provide a second physical copy of your data Extend an existing WSFC cluster to a remote DR site Review the…

Using Volume Shadow Copy

SIOS DataKeeper for Windows Technical Documentation » FAQs » Using Volume Shadow Copy

Question Can Volume Shadow Copy (VSS) be Used with DataKeeper Volumes? Answer VSS Shadow Copy can be enabled for DataKeeper volumes. However, the following guidelines apply: VSS snapshot images must not be stored on a DataKeeper volume. Storing VSS snapshots on…

CHKDSK

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Restrictions » CHKDSK

Description If you must run CHKDSK on a volume that is being replicated by SIOS DataKeeper, it is recommended that you PAUSE the mirror before initiating the CHKDSK. After running CHKDSK, CONTINUE the mirror. A partial resync occurs (updating those writes generated…

GETCOMPLETEVOLUMELIST

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » GETCOMPLETEVOLUMELIST

EMCMD GETCOMPLETEVOLUMELIST This command displays information on all volumes eligible to be mirrored or already in a mirror. Sample output: Volume 1 information: Volume Root = F: Volume Label = New Volume Volume File System…

Error Messages Log

SIOS DataKeeper for Windows Technical Documentation » FAQs » Error Messages Log

Question Where does DataKeeper log error messages? Answer DataKeeper events are logged in the Windows Application Event Log and the Windows System Event Log. Here is a breakdown of the messages you can look for. Application Event Log: Source = ExtMirrSvc –…

Safe Creation of a Shared-Storage Volume Resource

SIOS DataKeeper for Windows Technical Documentation » User Guide » Configuring Mirrors » Safe Creation of a Shared-Storage Volume Resource

DataKeeper allows mirrors to be created on shared volumes where more than one system has access to the same physical storage. The shared volume can be on the source side of the mirror or on the target side. Note: Dynamic disks are not supported with Shared Storage…

Network Bandwidth

SIOS DataKeeper for Windows Technical Documentation » Configuration » Network Bandwidth

Because DataKeeper can replicate data across any available network, special consideration must be given to the question, “Is there sufficient bandwidth to successfully replicate the volume and keep the mirror in the mirroring state as the source volume is updated…

Resynchronization

SIOS DataKeeper for Windows Technical Documentation » Introduction » Understanding Replication » Resynchronization

SIOS DataKeeper Resynchronization SIOS DataKeeper performs resynchronization through the use of a bitmap file (intent log). It allocates memory that is used to keep track of “dirty” or “clean” blocks. When a full resync begins, SIOS DataKeeper…

User Interface – Shows Only One Side of the Mirror

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » User Interface – Shows Only One Side of the Mirror

If the SIOS DataKeeper UI shows a volume as a source and its corresponding target as available or a volume as a target with the corresponding source volume as available, you can use the command line utility to force an update to the SIOS DataKeeper GUI or delete the…

SIOS DataKeeper Intent Log

SIOS DataKeeper for Windows Technical Documentation » Introduction » Understanding Replication » SIOS DataKeeper Intent Log

SIOS DataKeeper uses an intent log (also referred to as a bitmap file) to track changes made to the source, or to target volume during times that the target is unlocked. This log is a persistent record of write requests which have not yet been committed to both…

DataKeeper Event Log Notification

SIOS DataKeeper for Windows Technical Documentation » Administration » DataKeeper Event Log Notification

The Event Log notification is a mechanism by which one or more users may receive email notices when certain events occur. The Windows Event Log can be set up to provide notifications of certain DataKeeper events that get logged. *Note: This option is only available…

GETVOLUMEINFO

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » GETVOLUMEINFO

EMCMD GETVOLUMEINFO This command returns information about the selected volume. The parameters are: This can be either the source or the target systems. The drive letter of the volume you want information on. A…

Using DKPwrShell with SIOS DataKeeper

SIOS DataKeeper for Windows Technical Documentation » Administration » Using DKPwrShell with SIOS DataKeeper

SIOS DataKeeper includes a powershell module (DKPwrShell) that allows a user to manipulate a DataKeeper mirror using Microsoft Powershell. Commands are passed to a SIOS DataKeeper service and will fail if the service is not running. With Microsoft Powershell v3 or…

Reassigning a Job

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Jobs » Reassigning a Job

Use the Reassign Job function to move an existing mirror from one job to another without deleting the mirror. Select the job from the middle Summary panel. Right-click and select Reassign Job or select Reassign Job from the Actions panel. Select an existing…

SIOS DataKeeper for Windows

SIOS DataKeeper for Windows

Your information resource for SIOS DataKeeper Standard Edition SIOS Technology Corp. maintains documentation for all supported versions of SIOS DataKeeper Standard Edition. We welcome your suggestions and feedback. To help us continue to improve our documentation,…

Failed to Create Mirror

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Failed to Create Mirror

User Interface – Failed to Create Mirror – Application Event Log Error/Message Logged in the Application Event Log: File: .\GuiThread.cpp Line: 3099 Attempt to connect to remote system REMOTESERVER failed with error 5. Please ensure that the local…

CREATEMIRROR

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » CREATEMIRROR

EMCMD CREATEMIRROR [options] This command creates a mirror between two machines, using the same drive letter on each. The parameters are: This is the IP address of the source system (see Note below). This is the drive letter…

One-to-One

SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » One-to-One

This is a simple one source, one target configuration, mirroring Volume X across the network. In addition to providing a second physical copy of the data, DataKeeper also provides the ability to switch over the mirror which allows the data to become active on the…

Network Adapter Settings

SIOS DataKeeper for Windows Technical Documentation » Configuration » Network Adapter Settings

DataKeeper requires that “File and Printer Sharing for Microsoft Networks” be enabled on the network interfaces to make a NAMED PIPE connection and be able to run DataKeeper’s command line tool (EMCMD). To test if you can make a Named Pipe connection,…

UPDATEVOLUMEINFO

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » UPDATEVOLUMEINFO

EMCMD UPDATEVOLUMEINFO This command causes the SIOS DataKeeper service to query the driver for the correct mirror state. This command is useful if the DataKeeper GUI displays information that appears to be incorrect or not up-to-date. Note: The SIOS DataKeeper…

Remove-DataKeeperMirror

SIOS DataKeeper for Windows Technical Documentation » Administration » Using DKPwrShell with SIOS DataKeeper » Remove-DataKeeperMirror

This cmdlet will remove a DataKeeper mirror. It will attempt to remove the mirror from all nodes for this mirror. This command will not remove the mirror from any down or network inaccessible node. Parameters Parameter Type Required Position…

Administration

SIOS DataKeeper for Windows Technical Documentation » Administration

The topics in this section provide detailed instructions for performing DataKeeper administration tasks. _____________________________________________________________________________________________________________________________________________________ DataKeeper…

Volume Considerations

SIOS DataKeeper for Windows Technical Documentation » Introduction » Understanding Replication » Volume Considerations

SIOS DataKeeper primary and secondary systems have three types of volumes: system, non-mirrored and mirrored. During mirroring operations, system and non-mirrored volumes are not affected and the user has full access to all applications and data on these…

GETMIRRORTYPE

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » GETMIRRORTYPE

EMCMD GETMIRRORTYPE This command provides a numeric output of the type of mirror. The parameters are: This can be either the source or the target systems. The driver letter of the volume you want information on. Output…

Add-DataKeeperJobPair

SIOS DataKeeper for Windows Technical Documentation » Administration » Using DKPwrShell with SIOS DataKeeper » Add-DataKeeperJobPair

This cmdlet will add a node pair to an existing DataKeeper Job. It is used to expand the nodes and volumes contained within an existing job. For example, if a job exists for a volume between nodes A and B, and you want to add node C, run AddDataKeeperJobPair…

Many-to-One

SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » Many-to-One

This configuration involves multiple source servers replicating one (or more) volumes to the same target system. In this configuration, each volume being replicated to the target server must have a unique drive letter. Note: This is actually two One-to-One…

WAN Considerations

SIOS DataKeeper for Windows Technical Documentation » Configuration » WAN Considerations

Replicating data across the network to a remote server located miles away from the source server is the most common use of DataKeeper. Typically, this configuration relies on a WAN of some sort to provide the underlying network that DataKeeper uses to replicate the…

Awareness of Windows Filenames and Directory Names

SIOS DataKeeper for Windows Technical Documentation » FAQs » Awareness of Windows Filenames and Directory Names

Question Is SIOS DataKeeper aware of Windows filenames and directory names? Answer SIOS DataKeeper is implemented with a Windows kernel mode filter driver that sits above the physical disk driver but below the file system. As a result, the SIOS DataKeeper driver…

Synchronous and Asynchronous Mirroring

SIOS DataKeeper for Windows Technical Documentation » Introduction » Understanding Replication » Synchronous and Asynchronous Mirroring

SIOS DataKeeper employs both asynchronous and synchronous mirroring schemes. Understanding the advantages and disadvantages between synchronous and asynchronous mirroring is essential to the correct operation of SIOS DataKeeper. Synchronous Mirroring With synchronous…

Using EMCMD with SIOS DataKeeper

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper

The EMCMD utility that ships with SIOS DataKeeper provides users with a command line method to manipulate the mirror. Because these scripts run in situations where the “normal” validation rules may not apply, EMCMD does not perform the same kinds of sanity…

GETCONFIGURATION

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » GETCONFIGURATION

EMCMD GETCONFIGURATION This command retrieves and displays the net alert settings (also referred to as “volume attributes”) for the volume. The parameters are: This can be either the source or the target systems. The…

One-to-Many (Multiple Targets)

SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » One-to-Many (Multiple Targets)

This configuration involves one primary (source) system replicating one (or more) volume(s) to two different target systems across the network. This is referred to as a multiple target configuration. Note that there are two mirrors that are completely independent…

User Interface

NO TOC » DataKeeper Cluster Edition Technical Documentation » SIOS DataKeeper Cluster Edition Introduction » User Interface

SIOS DataKeeper User Interface The SIOS DataKeeper User Interface uses a standard MMC snap-in interface. The left pane displays the Console Tree view. This includes the Jobs and Reports. Currently, there are two reports available – Job Overview and Server…

User Interface

SIOS DataKeeper for Windows Technical Documentation » Introduction » User Interface

SIOS DataKeeper User Interface The SIOS DataKeeper User Interface uses a standard MMC snap-in interface. The left pane displays the Console Tree view. This includes the Jobs and Reports. Currently, there are two reports available – Job Overview and…

Creating Mirrors With Multiple Targets

SIOS DataKeeper for Windows Technical Documentation » User Guide » Configuring Mirrors » Creating Mirrors With Multiple Targets

SIOS DataKeeper provides the ability to replicate data from a single source volume to one or more target volumes. In addition, DataKeeper also allows you to switch over control and make any of the target volumes become the source. Assuming you have already created a…

CHANGEMIRRORENDPOINTS

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Restrictions » CHANGEMIRRORENDPOINTS

Description: This command, which is used to move a DataKeeper protected volume to another network location, only supports changing the endpoints of a mirrored volume that is configured on 3 nodes or fewer. Workaround: For configurations greater than three nodes, the…

Partial Resync

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Mirrors » Partial Resync

A partial resync is the resynchronization of only the necessary data to establish the new end points and is usually much quicker than a full resync.

DROPSNAPSHOT

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » DROPSNAPSHOT

EMCMD DROPSNAPSHOT [ …] This command will notify DataKeeper to lock the volume and clean up the snapshot files that it created. The parameters are: This is the IP address of the system containing the snapshot. This is the…

Renaming a Job

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Jobs » Renaming a Job

Select the job in the left Console Tree pane of the main DataKeeper window. You can select Rename Job from the Actions pane or right-click on the selected job and choose Rename Job from the menu that displays. Enter the new Job Name and new Job…

Resource Tag Name Restrictions

NO TOC » Resource Tag Name Restrictions

Tag Name Length All tags within DataKeeper may not exceed the 256 character limit. Valid “Special” Characters - _ . / However, the first character in a tag should not contain “.” or “/”. Invalid…

Introduction

SIOS DataKeeper for Windows Technical Documentation » Introduction

SIOS DataKeeper Overview SIOS DataKeeper is a highly optimized host-based replication solution which ensures your data is replicated as quickly and as efficiently as possible from your source server across the network to one or more target servers. Features Some…

TAKESNAPSHOT

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » TAKESNAPSHOT

EMCMD TAKESNAPSHOT […] This command, run on the target system, will notify DataKeeper to establish a snapshot of the given volume(s) on the given system. If no snapshot location has been configured, the command will fail. The parameters are: …

Reclaim Full Capacity of Target Drive

SIOS DataKeeper for Windows Technical Documentation » FAQs » Reclaim Full Capacity of Target Drive

Question How do I reclaim the full capacity of my target drive when I no longer need it for mirroring? Answer The file system on the target drive is overlaid by SIOS DataKeeper, thereby making it smaller than the actual partition size. Although Disk Management…

Jobs

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Jobs » Jobs

For ease of use and configuration, SIOS DataKeeper does much of its management of mirrors through an entity called a job. A job is a logical grouping of related mirrors and servers. This feature allows you to create a job for complex repetitive tasks and run them…

Access to Designated Volume Denied

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Access to Designated Volume Denied

If access to the designated volume is denied, then check whether you are attempting to create the mirror while other applications are accessing the volume. During Mirror Creation, the volumes must be locked on the target system for exclusive access by the SIOS…

GETSOURCEMIRROREDVOLUMES

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » GETSOURCEMIRROREDVOLUMES

EMCMD GETSOURCEMIRROREDVOLUMES This command displays information about the volumes on the system that are currently the source in a mirror. Sample output: Status = 0 Source Volume = F: Source Label = New Volume Source #Targs = 2 Target 0 Target…

Create a Mirror and Rename Job and Delete Job Actions Grayed Out

SIOS DataKeeper for Windows Technical Documentation » FAQs » Create a Mirror and Rename Job and Delete Job Actions Grayed Out

Question Why are the Create a Mirror, Rename Job and Delete Job actions grayed out? Answer If a node that is part of the job is down, these actions will not be enabled.

Get-DataKeeperVolumeInfo

SIOS DataKeeper for Windows Technical Documentation » Administration » Using DKPwrShell with SIOS DataKeeper » Get-DataKeeperVolumeInfo

This cmdlet is used to fetch information about a volume used in DataKeeper. It reports DataKeeper volume information. Parameters Parameter Type Required Position Notes Node String Yes 0 Use the Node parameter…

FAQs

SIOS DataKeeper for Windows Technical Documentation » FAQs

Refer to this section for answers to the most frequently asked questions about SIOS DataKeeper. ______________________________________________________________________________________________________________ Awareness of Windows Filenames and Directory Names AWS…

Remove-DataKeeperJob

SIOS DataKeeper for Windows Technical Documentation » Administration » Using DKPwrShell with SIOS DataKeeper » Remove-DataKeeperJob

This cmdlet will remove a DataKeeper job of a given ID. It will remove this job from all systems contained within the job. Parameters Parameter Type Required Position Notes JobID String Yes 0 The unique job…

Specifying Network Cards for Mirroring

SIOS DataKeeper for Windows Technical Documentation » Introduction » Understanding Replication » Specifying Network Cards for Mirroring

SIOS DataKeeper allows the administrator to specify which IP addresses should be used as mirror end-points. This allows the replicated data to be transmitted across a specific network which permits the user to segment mirrored traffic away from the client network if…

GETSERVICEINFO

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » GETSERVICEINFO

EMCMD GETSERVICEINFO This command retrieves version and other information about the SIOS DataKeeper service and driver that is running on the specified machine. The parameters are: This can be either the source or the target systems. Sample…

Pause and Unlock

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Mirrors » Pause and Unlock

This command pauses the mirror and unlocks the volume on the target system. You may wish to unlock the target volume in order to make a backup of the volume. Warning: Any writes to the target volume while it is unlocked will be lost when the mirror is…

Replacing a Target

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Mirrors » Replacing a Target

When replacing the target volume, you must either break the mirror or delete the mirror in order to ensure a full resync of the data from the source volume to the target volume when the target volume is back in place. Though similar to the Pause and Unlock, breaking…

SETSNAPSHOTLOCATION

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » SETSNAPSHOTLOCATION

EMCMD SETSNAPSHOTLOCATION “” This command sets the snapshot location (directory path) for the given volume on the given system. The directory must be valid on the system in question, must be a local drive/path, must be an absolute path and cannot be left…

CHANGEMIRRORENDPOINTS

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » CHANGEMIRRORENDPOINTS

EMCMD CHANGEMIRRORENDPOINTS This command is used to change the replication IP addresses within systems that are already part of a DataKeeper job for the given volume. Note: This command supports changing the endpoints of a mirrored volume that is configured on 3…

ISPOTENTIALMIRRORVOL

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » ISPOTENTIALMIRRORVOL

EMCMD ISPOTENTIALMIRRORVOL This command checks to determine if a volume is a candidate for mirroring. The command may only be run on the local system. The parameters are: This should be the local system. The drive letter of the…

CLEARSWITCHOVER

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » CLEARSWITCHOVER

EMCMD CLEARSWITCHOVER This command should be run on a target system where a mirror has been previously deleted with the DELETELOCALMIRRORONLY command and now needs to be re-established. This command clears the SIOS DataKeeper switchover flag that is set for a volume…

GETSNAPSHOTLOCATION

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » GETSNAPSHOTLOCATION

EMCMD GETSNAPSHOTLOCATION This command retrieves the currently configured snapshot location (directory path) for the given volume on the given system. It will return an empty result if the snapshot location is not configured on the given volume. The parameters…

GETMIRRORVOLINFO

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » GETMIRRORVOLINFO

EMCMD GETMIRRORVOLINFO This command provides a very terse output of the state of mirror. The command GETMIRRORVOLINFO can return multiple lines of output (one per target). It provides essentially the same information as the GETVOLUMEINFO command does. The…

Event Log Considerations

SIOS DataKeeper for Windows Technical Documentation » Administration » Event Log Considerations

It is important that SIOS DataKeeper be able to write to the Event Log. You should ensure that the Event Log does not become full. One way to accomplish this is to set the Event Log to overwrite events as needed: Open the Event Log. Right-click on System Log…

Restrictions

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Restrictions

Included below are restrictions associated with DataKeeper and DataKeeper Cluster Edition as well as possible workarounds and/or solutions. __________________________________________________________________________________________________________________ Bitlocker…

Volumes Unavailable for Mirroring

SIOS DataKeeper for Windows Technical Documentation » FAQs » Volumes Unavailable for Mirroring

Question Why are some of my volumes not available for mirroring? Answer The SIOS DataKeeper service filters out the following types of disk partitions: Windows system volume Volume(s) that contain the Windows pagefile Non-NTFS formatted volumes (e.g. FAT,…

CONTINUEMIRROR

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » CONTINUEMIRROR

EMCMD CONTINUEMIRROR [] This command forces a paused or broken mirror to resume mirroring. On successful completion of the resync (full or partial), the mirror state is changed to Mirroring. This command will not automatically relock the target volume if it is…

Stop Replication Between Source and Target

SIOS DataKeeper for Windows Technical Documentation » FAQs » Stop Replication Between Source and Target

Question How do I stop the replication between the Source and Target volumes? Answer Replication occurs at the driver level and can only be stopped or interrupted by sending a command from the DataKeeper GUI or the DataKeeper command line (EMCMD) to the DataKeeper…

RESYNCMIRROR

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » RESYNCMIRROR

EMCMD RESYNCMIRROR [] This command forces the mirror to be fully resynced. The parameters are: This is the source system name. This is the drive letter of the mirror that should be resynced. This is the IP…

AWS Issues and Workarounds

SIOS DataKeeper for Windows Technical Documentation » FAQs » AWS Issues and Workarounds

Question What is the best practice for shutting down clustered VMs in AWS? Answer If shutting down the primary source node, all cluster roles depending on a SIOS DataKeeper Volume Resource should be placed in the Offline state. Also make sure all mirrors are in the…

Removing a Shared System

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Shared Volumes » Removing a Shared System

To remove a shared system from either side of the mirror, bring up the Manage Shared Volumes dialog and uncheck the Include box for the system to be removed. When you click Done, the job will be updated so that the system is not part of the job. Warning: If a shared…

Unable to Determine Previous Install Path

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Unable to Determine Previous Install Path

Installation – Fatal Error: Unable to Determine Previous Install Path Error/Message Fatal Error: Unable to determine previous install path. DataKeeper cannot be uninstalled or reinstalled. Description When performing a “Repair” or…

User Interface – Failed to Create Mirror

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » User Interface – Failed to Create Mirror

User Interface – Failed to Create Mirror, Event ID 137 Error/Message Failed to create the mirror. Event Id: 137 System Event Log Unable to initialize mirror on the target machine. Volume Device: Source Volume: E Target Machine: 10.17.103.135 Target Volume:…

PAUSEMIRROR

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » PAUSEMIRROR

EMCMD PAUSEMIRROR [] This command forces the mirror into a Paused state. The parameters are: This is the source system of the mirror to pause. Running the PAUSEMIRROR command on the target has no effect. The drive letter of the…

BREAKMIRROR

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » BREAKMIRROR

EMCMD BREAKMIRROR [] This command forces the mirror into a Broken state. Breaking the mirror will cause a full resync to occur when the mirror is continued or resynced. The parameters are: This is the source system of the mirror to break. Running…

ISBREAKUSERREQUESTED

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » ISBREAKUSERREQUESTED

EMCMD ISBREAKUSERREQUESTED This command checks whether a broken mirror is a result of a user request. The parameters are: This can be either the source or the target system. The drive letter of the volume that you want to check.…

Deleting a Mirror

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Mirrors » Deleting a Mirror

This action discontinues replication and removes the mirror from the associated job. The target volume is unlocked and made fully accessible. Select the job that contains the mirror you want to delete. Right-click on the mirror and choose Delete Mirror or…

DELETEMIRROR

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » DELETEMIRROR

EMCMD DELETEMIRROR [] This command deletes the mirror from both the source and the target if is a source. If is a target, it will delete the target side of the mirror only if the source system is down. The parameters are: This can be either the…

Break

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Mirrors » Break

Breaking a mirror is similar to the Pause and Unlock function. It suspends mirror operation and unlocks the target volume for read/write access. The difference is that the Break operation marks all bits in the DataKeeper Intent Log as dirty, which forces a full…

Inability to Create a Mirror

SIOS DataKeeper for Windows Technical Documentation » FAQs » Inability to Create a Mirror

Question Why can’t I create a mirror? Answer The common cause of this problem is that the volume on either source or target is in use by another process. Stop the process that is accessing the volume and try again. The SIOS DataKeeper software requires…

DataKeeper Notification Icon

SIOS DataKeeper for Windows Technical Documentation » User Guide » DataKeeper Notification Icon

The DataKeeper Notification Icon is an application that will show a summary of your DataKeeper mirrors in the Windows Notification Tray. The icon displayed indicates what conditions have been detected, with the following priority. Error: An error condition, such as…

GETRESYNCSTATUS

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » GETRESYNCSTATUS

EMCMD GETRESYNCSTATUS This command returns information indicating the overall status of a resync operation. The parameters are: This can be either the source or the target systems. The drive letter of the volume you want to set…