The topic you requested could not be found.
Related topics are listed below.

Installing and Using DataKeeper Cluster Edition on Windows Server 2008 R2 / 2012 Core Platforms

NO TOC » SIOS Protection Suite for Windows » Clustering » Installing and Using DataKeeper Cluster Edition on Windows Server 2008 R2 / 2012 Core Platforms

Prepare the servers. Install Windows Server 2008 R2/2012 Core on two servers, configure IP, join a domain, configure firewall for remote administration, configure the server for remote access and install the Failover Cluster feature. Server Core Installation…

Switchover and Failover with Multiple Targets

SIOS DataKeeper for Windows Technical Documentation » User Guide » Configuring Mirrors » Switchover and Failover with Multiple Targets

In a multiple target configuration, it is important to understand how DataKeeper mirrors will work in the following scenarios: Manual switchover to a target server Source server failure followed by a manual switchover to a target server Example: In the…

DataKeeper Cluster Edition Release Notes

NO TOC » DataKeeper Cluster Edition Release Notes

SIOS DataKeeper Cluster Edition Release Notes Version 8.6.2 (Version 8 Update 6 Maintenance 2) Important!! Read This Document Before Attempting To Install Or Use This Product! This document contains last minute information that must be considered before, during…

Windows Server 2012 Specific Issues

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Windows Server 2012 Specific Issues

For issues related to Windows Server 2012, see the following topics: __________________________________________________________________________________________________________________ Windows Server 2012 MMC Snap-in Crash Windows Server 2012 iSCSI Target Role Does…

Windows Server 2012 MMC Snap-in Crash

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Windows Server 2012 Specific Issues » Windows Server 2012 MMC Snap-in Crash

Description When using the DataKeeper user interface (MMC Snap-in) on Windows Server 2012, the mmc.exe process may crash unexpectedly due to an internal .Net or Windows Presentation Foundation (WPF) issue. The error may show up on the screen and/or the event…

Mirror Creation and Cluster Configuration

SIOS DataKeeper for Windows Technical Documentation » User Guide » Using Microsoft iSCSI Target With DataKeeper on Windows 2012 » Mirror Creation and Cluster Configuration

Create your DataKeeper volumes and your cluster. See Creating a DataKeeper Volume Resource in WSFC for reference. *IMPORTANT: The iSCSI Target Role only supports DataKeeper Volumes that are mirrors of Simple Volumes placed on Basic Disks. If any of your mirrors are…

Upgrading SIOS DataKeeper Cluster Edition

NO TOC » DataKeeper Cluster Edition Installation Guide » Upgrading SIOS DataKeeper Cluster Edition

Upgrading DataKeeper Cluster Edition from previous versions of DataKeeper Cluster Edition is very straightforward. Simply run the installation process outlined below on all systems. The upgrade process stops the DataKeeper Service, copies the new files to the…

Creating Other Server Resource in WSFC

NO TOC » SIOS Protection Suite for Windows » Clustering » Creating Other Server Resource in WSFC

When creating an Other Server resource in WSFC, you will be prompted for a storage resource (DataKeeper resource) twice. You will check the first one, but do not need to check the second dialog. Click the “checkbox” for the first dialog “Select…

Windows Server 2012 NIC Teaming Issue

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Windows Server 2012 Specific Issues » Windows Server 2012 NIC Teaming Issue

If you use the NIC Teaming feature of Windows Server 2012, Windows 2012 will report only one adapter MAC address for the license. If you have many underlying adapters, the MAC address will arbitrarily change and Windows may pick one of the adapters that may no longer…

Setup of iSCSI Initiator on Windows 2012

SIOS DataKeeper for Windows Technical Documentation » User Guide » Using Microsoft iSCSI Target With DataKeeper on Windows 2012 » Setup of iSCSI Initiator on Windows 2012

Once the virtual disks/targets are created, each of the cluster servers must initiate a connection to them via Microsoft’s iSCSI Initiator. From “Administrator Tools” in “Server Manager”, start “iSCSI Initiator”. Select the “Targets” tab and…

DataKeeper Cluster Edition Installation Guide

NO TOC » DataKeeper Cluster Edition Installation Guide

The DataKeeper Cluster Edition Installation Guide contains information on how to install and license your Cluster Edition software. Once you have completed the steps in this guide, you will be ready to configure your Cluster resources. The DataKeeper Cluster Edition…

Uninstalling SIOS DataKeeper Cluster Edition

NO TOC » DataKeeper Cluster Edition Installation Guide » Uninstalling SIOS DataKeeper Cluster Edition

Before Removing DataKeeper If planning to uninstall DataKeeper and reinstall a previous version, all jobs/mirrors must be deleted on each node prior to uninstalling. These will need to be recreated once software is reinstalled. Uninstall DataKeeper Cluster…

SIOS DataKeeper Cluster Edition Introduction

NO TOC » DataKeeper Cluster Edition Technical Documentation » SIOS DataKeeper Cluster Edition Introduction

SIOS DataKeeper Overview DataKeeper with High Availability – Cluster Edition Overview SIOS DataKeeper is a highly optimized host-based replication solution which ensures your data is replicated as quickly and as efficiently as possible from your source server…

Using Microsoft iSCSI Target With DataKeeper on Windows 2012

SIOS DataKeeper for Windows Technical Documentation » User Guide » Using Microsoft iSCSI Target With DataKeeper on Windows 2012

The following topics will guide you in setting up Microsoft iSCSI Target with DataKeeper via the user interface. *NOTE: This configuration is not supported in a VMware ESX environment. …

Using DKCE to Enable Multi-Site File Share Resources with Windows Server 2008R2 WSFC

NO TOC » SIOS Protection Suite for Windows » Clustering » Using DKCE to Enable Multi-Site File Share Resources with Windows Server 2008R2 WSFC

Use the following procedure to protect File Share resources using SIOS DataKeeper and Microsoft Failover Cluster (WSFC). *IMPORTANT NOTE: DataKeeper Cluster Edition registration with Failover Cluster is automatic and occurs 60 seconds after detecting a Failover…

Delete and Switchover Actions Grayed Out

SIOS DataKeeper for Windows Technical Documentation » FAQs » Delete and Switchover Actions Grayed Out

Question Why are the Delete and Switchover actions grayed out on the DataKeeper User Interface? Answer If the volume is under clustering protection (Microsoft clustering or SIOS LifeKeeper clustering), these actions are disabled.

Windows Server 2012 iSCSI Target Role Does Not Support Dynamic Disks

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Windows Server 2012 Specific Issues » Windows Server 2012 iSCSI Target Role Does Not Support Dynamic Disks

Description The iSCSI Target Role only supports DataKeeper Volumes that are mirrors of Simple Volumes placed on Basic Disks. If any of your mirrors are using volumes such as Striped or Spanned volumes on a Dynamic Disk on either the source or target system, then you…

Extending a Traditional 2-Node Cluster to a Shared-Replicated Configuration

NO TOC » SIOS Protection Suite for Windows » Clustering » Extending a Traditional 2-Node Cluster to a Shared-Replicated Configuration

Add a Shared Node Using Windows Server 2008R2 or 2012 When using Windows Server 2008R2 or 2012, a 1×1 2-Node replicated cluster using DataKeeper Volumes can be extended to a 2×1 shared and replicated 3-Node cluster by using either of the following…

Using DataKeeper Cluster Edition to Enable Multi-Site Hyper-V Clusters

NO TOC » SIOS Protection Suite for Windows » Clustering » Using DataKeeper Cluster Edition to Enable Multi-Site Hyper-V Clusters

Prerequisite Familiarity with Microsoft Windows Server, Microsoft Windows Failover Cluster Server Management and Hyper-V Virtual Management procedures and commands is highly recommended. Note: DataKeeper ClusterCluster Edition does not support Cluster Shared Volumes;…

Server Login Accounts and Passwords Must Be Same on Each Server in the Cluster

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Server Login Accounts and Passwords Must Be Same on Each Server in the Cluster

The DataKeeper GUI cannot connect to the target server in a cluster if server Login Accounts and Passwords are different on each server. Error Message An Error Code 1326 will appear in the Application log (Note: The Error Code may also be a 2 with Event ID…

Create a Mirror and Rename Job and Delete Job Actions Grayed Out

SIOS DataKeeper for Windows Technical Documentation » FAQs » Create a Mirror and Rename Job and Delete Job Actions Grayed Out

Question Why are the Create a Mirror, Rename Job and Delete Job actions grayed out? Answer If a node that is part of the job is down, these actions will not be enabled.

Switchover in an N-Shared x N-Shared Configuration

NO TOC » SIOS Protection Suite for Windows » Clustering » Switchover in an N-Shared x N-Shared Configuration

In a multi-shared storage environment between two sites (as shown in the diagram below), each server in each site has access to the storage being shared between the servers at that site. When a DataKeeper mirror is created, one server in each site will be designated…

Non-mirrored Volume Resource

NO TOC » SIOS Protection Suite for Windows » Clustering » Non-mirrored Volume Resource

A non-mirrored volume resource is a DataKeeper resource where no data is replicated to any node in the cluster. This resource type should only be used where the data is temporary and/or non-critical such as MS SQL Server tempdb space. In this case, when MS SQL restarts…

N-Shared-Disk Replicated to One

SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » N-Shared-Disk Replicated to One

This configuration allows you to replicate the shared volume(s) of the primary site to a remote system across the network. This configuration is ideal for providing local failover within the Primary Site and disaster recovery protection should the entire Primary…

User Interface

NO TOC » DataKeeper Cluster Edition Technical Documentation » SIOS DataKeeper Cluster Edition Introduction » User Interface

SIOS DataKeeper User Interface The SIOS DataKeeper User Interface uses a standard MMC snap-in interface. The left pane displays the Console Tree view. This includes the Jobs and Reports. Currently, there are two reports available – Job Overview and Server…

User Interface

SIOS DataKeeper for Windows Technical Documentation » Introduction » User Interface

SIOS DataKeeper User Interface The SIOS DataKeeper User Interface uses a standard MMC snap-in interface. The left pane displays the Console Tree view. This includes the Jobs and Reports. Currently, there are two reports available – Job Overview and…

Unable to Determine Previous Install Path

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Unable to Determine Previous Install Path

Installation – Fatal Error: Unable to Determine Previous Install Path Error/Message Fatal Error: Unable to determine previous install path. DataKeeper cannot be uninstalled or reinstalled. Description When performing a “Repair” or…

Licensing

NO TOC » SIOS Protection Suite for Windows » SIOS Protection Suite Installation Guide » Installing SIOS Protection Suite » Licensing

Obtaining and Installing the License DataKeeper Cluster Edition requires a unique license for each server. The license is a run-time license which means that you can install it without the license, but the license must be installed before you can successfully start…

Known Issues and Workarounds

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds

Included below are known issues open against DataKeeper as well as possible workarounds and/or solutions. __________________________________________________________________________________________________________________ Access to Designated Volume Denied Failed to…

Firewall Configurations

SIOS DataKeeper for Windows Technical Documentation » Configuration » Firewall Configurations

SIOS DataKeeper cannot function properly if the firewall settings for the source and target machines are not configured correctly. This means you will need to configure a rule for inbound and outbound connections on each server running SIOS DataKeeper as well as any…

Troubleshooting

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting

The topics in this section contain important information about known issues and restrictions offering possible workarounds and/or solutions. ________________________________________________________________________________________________________________ Known Issues…

Getting Started

SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started

Choose Your Configuration DataKeeper can be utilized in a number of different configurations to facilitate a number of different functions including: Provide a second physical copy of your data Extend an existing WSFC cluster to a remote DR site Review the…

GETCONFIGURATION

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » GETCONFIGURATION

EMCMD GETCONFIGURATION This command retrieves and displays the net alert settings (also referred to as “volume attributes”) for the volume. The parameters are: This can be either the source or the target systems. The…

Error Messages Log

SIOS DataKeeper for Windows Technical Documentation » FAQs » Error Messages Log

Question Where does DataKeeper log error messages? Answer DataKeeper events are logged in the Windows Application Event Log and the Windows System Event Log. Here is a breakdown of the messages you can look for. Application Event Log: Source = ExtMirrSvc –…

SETCONFIGURATION

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » SETCONFIGURATION

EMCMD SETCONFIGURATION This command sets the net alert settings (also referred to as “volume attributes”) for the volume. The parameters are: This can be either the source or the target system. The drive letter of the…

Split-Brain FAQs

SIOS DataKeeper for Windows Technical Documentation » FAQs » Split-Brain FAQs

Scenario I am using DataKeeper in a non-cluster environment. I am mirroring from Server1 at one site to Server2 at a second site. Communication is broken due to site-to-site VPN, and I need to fail over from Server1 to Server2. I cannot access Server1 from anywhere.…

DataKeeper Target Snapshot

SIOS DataKeeper for Windows Technical Documentation » User Guide » DataKeeper Target Snapshot

Overview DataKeeper’s target snapshot feature, integrated with both DataKeeper and DataKeeper Cluster Edition, is the process of creating point in time copies of replicated volumes allowing access to data on a standby cluster node without interrupting data…

Deleting a Mirror

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Mirrors » Deleting a Mirror

This action discontinues replication and removes the mirror from the associated job. The target volume is unlocked and made fully accessible. Select the job that contains the mirror you want to delete. Right-click on the mirror and choose Delete Mirror or…

DKCE Support Matrix

NO TOC » DKCE Support Matrix

Server Components Supported Operating System v8.0.0 v8.0.1 v8.1.0 v8.2.0 v8.2.1 v8.3.0 v8.4.0 v8.5.0 v8.5.1 v8.6.0 v8.6.1 Note: The operating system versions listed…

User Interface – Shows Only One Side of the Mirror

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » User Interface – Shows Only One Side of the Mirror

If the SIOS DataKeeper UI shows a volume as a source and its corresponding target as available or a volume as a target with the corresponding source volume as available, you can use the command line utility to force an update to the SIOS DataKeeper GUI or delete the…

Installation of the iSCSI Target

SIOS DataKeeper for Windows Technical Documentation » User Guide » Using Microsoft iSCSI Target With DataKeeper on Windows 2012 » Installation of the iSCSI Target

From the Server Manager menu, select “Add Roles and Features” from the “Manage” drop-down. Select the “Role-based or feature-based installation” option. From the list of servers presented, select the appropriate server. On the…

Switching Over a Mirror

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Jobs » Switching Over a Mirror

The Switchover Mirror function enables you to switch over all the mirrors in a job or just one of the mirrors in a job. A “mirror” includes all variants for mirrors such as standard single-target replication and complex geometries such as multi-target…

Configuring Mirrors

SIOS DataKeeper for Windows Technical Documentation » User Guide » Configuring Mirrors

Creating a Mirror Creating Mirrors With Shared Volumes Safe Creation of a Shared-Storage Volume Resource Creating Mirrors With Multiple Targets Switchover and Failover with Multiple Targets

Using SIOS DataKeeper Standard Edition To Provide Disaster Recovery For Hyper-V Virtual Machines

SIOS DataKeeper for Windows Technical Documentation » User Guide » Using SIOS DataKeeper Standard Edition To Provide Disaster Recovery For Hyper-V Virtual Machines

Considerations When preparing a Hyper-V environment that spans subnets, subnetting may need to be taken into consideration for any applications that are running inside the virtual machine. Some applications “hard code” IP addresses into their…

Creation of iSCSI Virtual Disks

SIOS DataKeeper for Windows Technical Documentation » User Guide » Using Microsoft iSCSI Target With DataKeeper on Windows 2012 » Creation of iSCSI Virtual Disks

Perform the following on the primary server, wherever the iSCSI Target server is online at the moment. From Server Manager, navigate to File and Storage Services and select iSCSI. Click on the link “To create an iSCSI virtual disk, start the New iSCSI Virtual Disk…

DataKeeper Volume Resize

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Mirrors » DataKeeper Volume Resize

DataKeeper allows users to extend and shrink their DataKeeper volumes dynamically while retaining mirror settings. Once the resize is complete, a partial resync will be performed. Note: This resize procedure should be performed on only one volume at a time. !WARNING …

SIOS DataKeeper for Windows Quick Start Guide

SIOS DataKeeper for Windows Quick Start Guide

This topic provides step-by-step instructions for installing and configuring DataKeeper Standard Edition. The series of steps includes links into the documentation that describe each step in detail. Prerequisites and Installation Read the SIOS Protection Suite for…

Unextending a Hierarchy

NO TOC » SIOS Protection Suite for Windows » Administration » Working With Resource Hierarchies » Unextending a Hierarchy

The Unextend Resource Hierarchy option removes a complete hierarchy, including all of its resources, from a single server. This is different than the Delete Resource Hierarchy selection which removes a hierarchy from all servers. When using Unextend Resource…

Continue and Lock

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Mirrors » Continue and Lock

This action locks the volume on the target system and then resumes the mirroring process. While the mirror is paused, writes on the source system are recorded in the SIOS DataKeeper Intent Log. When the Continue and Lock operation occurs, these changed blocks –…

Installation

NO TOC » DataKeeper Cluster Edition Installation Guide » Installation

Once you have downloaded the DataKeeper Cluster Edition software, the topics that follow explain the installation process. Core Software Installing Core Third Party Product Files Application Directory Anomaly Localized Language Supplement Silent…

DataKeeper Notification Icon

SIOS DataKeeper for Windows Technical Documentation » User Guide » DataKeeper Notification Icon

The DataKeeper Notification Icon is an application that will show a summary of your DataKeeper mirrors in the Windows Notification Tray. The icon displayed indicates what conditions have been detected, with the following priority. Error: An error condition, such as…

DataKeeper User Guide

NO TOC » SIOS Protection Suite for Windows » DataKeeper » DataKeeper User Guide

The topics in this section are designed to be a reference for you as you get started using SIOS DataKeeper, helping you identify the type of configuration you are interested in implementing and providing detailed instructions for effectively using your SIOS DataKeeper…

Deleting a Job

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Jobs » Deleting a Job

Select the job in the left Console Tree pane of the main DataKeeper window. You can select Delete Job from the Actions pane or right-click on the selected job and choose Delete Job from the menu that displays. Select Yes to delete the selected job and…

User Guide

SIOS DataKeeper for Windows Technical Documentation » User Guide

The topics in this section are designed to be a reference for you as you get started using SIOS DataKeeper, helping you identify the type of configuration you are interested in implementing and providing detailed instructions for effectively using your SIOS DataKeeper…

Restrictions

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Restrictions

Included below are restrictions associated with DataKeeper and DataKeeper Cluster Edition as well as possible workarounds and/or solutions. __________________________________________________________________________________________________________________ Bitlocker…

AWS Issues and Workarounds

SIOS DataKeeper for Windows Technical Documentation » FAQs » AWS Issues and Workarounds

Question What is the best practice for shutting down clustered VMs in AWS? Answer If shutting down the primary source node, all cluster roles depending on a SIOS DataKeeper Volume Resource should be placed in the Offline state. Also make sure all mirrors are in the…

Configuration

SIOS DataKeeper for Windows Technical Documentation » Configuration

Requirements/Considerations The topics in this section identify several prerequisites to be aware of before implementing your DataKeeper…

DELETEMIRROR

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » DELETEMIRROR

EMCMD DELETEMIRROR [] This command deletes the mirror from both the source and the target if is a source. If is a target, it will delete the target side of the mirror only if the source system is down. The parameters are: This can be either the…

Deleting a Mirror

SIOS DataKeeper for Windows Technical Documentation » FAQs » Deleting a Mirror

Question What actually happens when you delete a mirror? Answer The data remains on both sides, but the target and source data are no longer synchronized. The target volume is unlocked and made fully accessible.

Relocation of Intent Log

SIOS DataKeeper for Windows Technical Documentation » Introduction » Understanding Replication » Relocation of Intent Log

To relocate the Intent Log (bitmap file), please perform the following on all servers involved: *LEAVE THE MIRROR IN THE MIRRORING STATE! Do not pause it and then move the bitmap file. If you have more than one DataKeeper mirror, move all mirrors to a single system…

Failed to Create Mirror

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Failed to Create Mirror

User Interface – Failed to Create Mirror – Application Event Log Error/Message Logged in the Application Event Log: File: .\GuiThread.cpp Line: 3099 Attempt to connect to remote system REMOTESERVER failed with error 5. Please ensure that the local…

Managing Mirrors

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Mirrors » Managing Mirrors

From the Actions pane, you can select a job and manage all the mirrors in a job, or you can perform an action on a single mirror in a job. After selecting a job, you can: Pause and Unlock All Mirrors Continue and Lock All Mirrors Break All…

Replacing a Target

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Mirrors » Replacing a Target

When replacing the target volume, you must either break the mirror or delete the mirror in order to ensure a full resync of the data from the source volume to the target volume when the target volume is back in place. Though similar to the Pause and Unlock, breaking…

N-Shared-Disk Replicated to N-Shared-Disk

SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » N-Shared-Disk Replicated to N-Shared-Disk

This configuration replicates data between sites where each site utilizes shared storage. Note that the number of systems in the Primary Site does not have to equal the number of systems in the Remote Site. Also note that only the Source Server has access to the…

FAQs

SIOS DataKeeper for Windows Technical Documentation » FAQs

Refer to this section for answers to the most frequently asked questions about SIOS DataKeeper. ______________________________________________________________________________________________________________ Awareness of Windows Filenames and Directory Names AWS…

One-to-Many (Multiple Targets)

SIOS DataKeeper for Windows Technical Documentation » User Guide » Getting Started » One-to-Many (Multiple Targets)

This configuration involves one primary (source) system replicating one (or more) volume(s) to two different target systems across the network. This is referred to as a multiple target configuration. Note that there are two mirrors that are completely independent…

DELETELOCALMIRRORONLY

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » DELETELOCALMIRRORONLY

EMCMD DELETELOCALMIRRORONLY [] This command deletes the mirror only on the it is issued on. It handles the case when a mirror ends up with a target and no source or source and no target. The parameters are: This can be either the source or the…

Mirroring with Dynamic Disks

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » Mirroring with Dynamic Disks

When changing from a Basic Disk to a Dynamic Disk, the underlying volume GUID may be changed by the OS upon reboot. This will cause a DataKeeper mirror to break. Suggested Action When mirroring with dynamic disks, your dynamic volumes should be created and a reboot…

Initial Synchronization of Data Across the LAN or WAN

SIOS DataKeeper for Windows Technical Documentation » Configuration » WAN Considerations » Initial Synchronization of Data Across the LAN or WAN

When replicating large amounts of data over a WAN link, it is desirable to avoid full resynchronizations which can consume large amounts of network bandwidth and time. DataKeeper avoids almost all full resyncs by using its bitmap technology. However, the initial…

Setting Up SIOS DataKeeper

SIOS DataKeeper for Windows Technical Documentation » User Guide » Setup » Setting Up SIOS DataKeeper

Setting Up SIOS DataKeeper Follow these steps to start using SIOS DataKeeper: Connect to the servers you wish to configure for replication. You can select Connect to Server from the Action pull down menu, right-click on the job folder in the left panel tree…

User Interface – Failed to Create Mirror

SIOS DataKeeper for Windows Technical Documentation » Troubleshooting » Known Issues and Workarounds » User Interface – Failed to Create Mirror

User Interface – Failed to Create Mirror, Event ID 137 Error/Message Failed to create the mirror. Event Id: 137 System Event Log Unable to initialize mirror on the target machine. Volume Device: Source Volume: E Target Machine: 10.17.103.135 Target Volume:…

Setup

SIOS DataKeeper for Windows Technical Documentation » User Guide » Setup

Setting Up SIOS DataKeeper Follow these steps to start using SIOS DataKeeper: Connect to the servers you wish to configure for replication. You can select Connect to Server from the Action pull down menu, right-click on the job folder in the left panel tree…

Setting Up SIOS DataKeeper

NO TOC » SIOS Protection Suite for Windows » DataKeeper » Setting Up SIOS DataKeeper

Follow these steps to start using SIOS DataKeeper: Connect to the servers you wish to configure for replication. You can select Connect to Server from the Action pull down menu, right-click on the job folder in the left panel tree display and select Connect to…

CLEARSWITCHOVER

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper » CLEARSWITCHOVER

EMCMD CLEARSWITCHOVER This command should be run on a target system where a mirror has been previously deleted with the DELETELOCALMIRRORONLY command and now needs to be re-established. This command clears the SIOS DataKeeper switchover flag that is set for a volume…

Network Bandwidth

SIOS DataKeeper for Windows Technical Documentation » Configuration » Network Bandwidth

Because DataKeeper can replicate data across any available network, special consideration must be given to the question, “Is there sufficient bandwidth to successfully replicate the volume and keep the mirror in the mirroring state as the source volume is updated…

DataKeeper Service Log On ID and Password Selection

SIOS DataKeeper for Windows Technical Documentation » Introduction » DataKeeper Components » DataKeeper Service Log On ID and Password Selection

During a new DataKeeper installation setup, the user will be prompted for a DataKeeper Service Log On ID and Password. The DataKeeper Service uses authenticated connections to perform volume switchovers and make mirror role changes across multiple servers. The Log On…

DataKeeper Service Log On ID and Password Selection

SIOS DataKeeper for Windows Technical Documentation » Configuration » DataKeeper Service Log On ID and Password Selection

During a new DataKeeper installation setup, the user will be prompted for a DataKeeper Service Log On ID and Password. The DataKeeper Service uses authenticated connections to perform volume switchovers and make mirror role changes across multiple servers. The Log On…

Pause and Unlock

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Mirrors » Pause and Unlock

This command pauses the mirror and unlocks the volume on the target system. You may wish to unlock the target volume in order to make a backup of the volume. Warning: Any writes to the target volume while it is unlocked will be lost when the mirror is…

Using Disk Management

SIOS DataKeeper for Windows Technical Documentation » Administration » Using Disk Management

When using the Windows Disk Management utility to access SIOS DataKeeper volumes, please note the following: Using Disk Management to delete partitions that are being mirrored is not supported. Deleting a partition that is part of a SIOS DataKeeper mirror will yield…

Stop Replication Between Source and Target

SIOS DataKeeper for Windows Technical Documentation » FAQs » Stop Replication Between Source and Target

Question How do I stop the replication between the Source and Target volumes? Answer Replication occurs at the driver level and can only be stopped or interrupted by sending a command from the DataKeeper GUI or the DataKeeper command line (EMCMD) to the DataKeeper…

Using EMCMD with SIOS DataKeeper

SIOS DataKeeper for Windows Technical Documentation » Administration » Using EMCMD with SIOS DataKeeper

The EMCMD utility that ships with SIOS DataKeeper provides users with a command line method to manipulate the mirror. Because these scripts run in situations where the “normal” validation rules may not apply, EMCMD does not perform the same kinds of sanity…

Managing Shared Volumes

SIOS DataKeeper for Windows Technical Documentation » User Guide » Working With Shared Volumes » Managing Shared Volumes

Once your mirrors have been created, DataKeeper allows you to manage your shared volumes. By choosing Manage Shared Volumes from the DataKeeper GUI, you can add another system, which is sharing a mirrored volume, to a job. It also allows you to remove a shared system…

Performance Monitor Counters

SIOS DataKeeper for Windows Technical Documentation » Introduction » Understanding Replication » Performance Monitor Counters

SIOS DataKeeper provides counters that extend Performance Monitor with statistics about the status of mirroring on volumes. The counters are installed during the full installation of SIOS DataKeeper software. To access the counters, do the following: On a…

Registry Entries

SIOS DataKeeper for Windows Technical Documentation » Administration » Registry Entries

The following registry entries are associated with the SIOS DataKeeper service or driver and can be viewed using Regedt32. The first section contains entries that may be modified; the second section contains entries that are for viewing only and should not be…

Components

NO TOC » DataKeeper Cluster Edition Technical Documentation » SIOS DataKeeper Cluster Edition Introduction » Components

DataKeeper Components SIOS DataKeeper for Windows is comprised of the following components: DataKeeper Driver (ExtMirr.sys) – The DataKeeper Driver is a kernel mode driver and is responsible for all mirroring activity between the mirror…

DataKeeper Components

SIOS DataKeeper for Windows Technical Documentation » Introduction » DataKeeper Components

SIOS DataKeeper for Windows is comprised of the following components: DataKeeper Driver (ExtMirr.sys) – The DataKeeper Driver is a kernel mode driver and is responsible for all mirroring activity between the mirror endpoints. DataKeeper Service…

Network Adapter Settings

SIOS DataKeeper for Windows Technical Documentation » Configuration » Network Adapter Settings

DataKeeper requires that “File and Printer Sharing for Microsoft Networks” be enabled on the network interfaces to make a NAMED PIPE connection and be able to run DataKeeper’s command line tool (EMCMD). To test if you can make a Named Pipe connection,…

Creating Mirrors With Multiple Targets

SIOS DataKeeper for Windows Technical Documentation » User Guide » Configuring Mirrors » Creating Mirrors With Multiple Targets

SIOS DataKeeper provides the ability to replicate data from a single source volume to one or more target volumes. In addition, DataKeeper also allows you to switch over control and make any of the target volumes become the source. Assuming you have already created a…

High-Speed Storage Best Practices

SIOS DataKeeper for Windows Technical Documentation » Configuration » High-Speed Storage Best Practices

Configure Bitmaps If the DataKeeper default bitmap location (%ExtMirrBase%\Bitmaps) is not located on high-speed storage, you should move the bitmaps to a high-speed storage device in order to eliminate I/O bottlenecks with bitmap access. To do this, allocate a small…